linux-user: Move target_signal.h generic definitions to generic/signal.h

No code change

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>

linux-user: Move target_signal.h generic definitions to generic/signal.h

No code change

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1637893388-10282-2-git-send-email-gaosong@loongson.cn>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

show more ...

linux-user/ppc: Implement setup_sigtramp

Create and record the two signal trampolines.

Cc: qemu-ppc@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson

linux-user/ppc: Implement setup_sigtramp

Create and record the two signal trampolines.

Cc: qemu-ppc@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-20-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

show more ...

Merge remote-tracking branch 'remotes/stefanha-gitlab/tags/block-pull-request' into staging

Pull request for 5.2

NVMe fixes to solve IOMMU issues on non-x86 and error message/tracin

Merge remote-tracking branch 'remotes/stefanha-gitlab/tags/block-pull-request' into staging

Pull request for 5.2

NVMe fixes to solve IOMMU issues on non-x86 and error message/tracing
improvements. Elena Afanasova's ioeventfd fixes are also included.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

# gpg: Signature made Wed 04 Nov 2020 15:18:16 GMT
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha-gitlab/tags/block-pull-request: (33 commits)
util/vfio-helpers: Assert offset is aligned to page size
util/vfio-helpers: Convert vfio_dump_mapping to trace events
util/vfio-helpers: Improve DMA trace events
util/vfio-helpers: Trace where BARs are mapped
util/vfio-helpers: Trace PCI BAR region info
util/vfio-helpers: Trace PCI I/O config accesses
util/vfio-helpers: Improve reporting unsupported IOMMU type
block/nvme: Fix nvme_submit_command() on big-endian host
block/nvme: Fix use of write-only doorbells page on Aarch64 arch
block/nvme: Align iov's va and size on host page size
block/nvme: Change size and alignment of prp_list_pages
block/nvme: Change size and alignment of queue
block/nvme: Change size and alignment of IDENTIFY response buffer
block/nvme: Correct minimum device page size
block/nvme: Set request_alignment at initialization
block/nvme: Simplify nvme_cmd_sync()
block/nvme: Simplify ADMIN queue access
block/nvme: Correctly initialize Admin Queue Attributes
block/nvme: Use definitions instead of magic values in add_io_queue()
block/nvme: Introduce Completion Queue definitions
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pc,vhost: fixes

Fixes all over the place.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pc,vhost: fixes

Fixes all over the place.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Tue 17 Nov 2020 09:17:12 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
vhost-user-blk/scsi: Fix broken error handling for socket call
contrib/libvhost-user: Fix bad printf format specifiers
hw/i386/acpi-build: Fix maybe-uninitialized error when ACPI hotplug off
configure: mark vhost-user Linux-only
vhost-user-blk-server: depend on CONFIG_VHOST_USER
meson: move vhost_user_blk_server to meson.build
vhost-user: fix VHOST_USER_ADD/REM_MEM_REG truncation

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
# meson.build

show more ...

Merge remote-tracking branch 'remotes/mcayland/tags/qemu-macppc-20201112' into staging

qemu-macppc fix for 5.2

# gpg: Signature made Thu 12 Nov 2020 09:50:45 GMT
# gpg:

Merge remote-tracking branch 'remotes/mcayland/tags/qemu-macppc-20201112' into staging

qemu-macppc fix for 5.2

# gpg: Signature made Thu 12 Nov 2020 09:50:45 GMT
# gpg: using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F
# gpg: issuer "mark.cave-ayland@ilande.co.uk"
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [full]
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F

* remotes/mcayland/tags/qemu-macppc-20201112:
macio: set user_creatable to false in macio_class_init()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-5.2-pull-request' into staging

Fixes for epoll_ctl and stack_t

# gpg: Signature made Wed 11 Nov 2020 21:40:16 GMT

Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-5.2-pull-request' into staging

Fixes for epoll_ctl and stack_t

# gpg: Signature made Wed 11 Nov 2020 21:40:16 GMT
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/linux-user-for-5.2-pull-request:
linux-user: Prevent crash in epoll_ctl
linux-user: Correct definition of stack_t

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

linux-user: Correct definition of stack_t

Some platforms used the wrong definition of stack_t where the flags and
size fields were swapped or where the flags field had type ulong instead

linux-user: Correct definition of stack_t

Some platforms used the wrong definition of stack_t where the flags and
size fields were swapped or where the flags field had type ulong instead
of int.

Due to the presence of padding space in the structure and the prevalence
of little-endian machines this problem went unnoticed for a long time.

The type definitions have been cross-checked with the ones defined in
the Linux kernel v5.9, plus some older versions for a few architecture
that have been removed and Xilinx's kernel fork for NiosII [1].

The bsd-user headers remain unchanged as I don't know if they are wrong
or not.

[1] https://github.com/Xilinx/linux-xlnx/blob/master/arch/nios2/include/uapi/asm/signal.h

Signed-off-by: Giuseppe Musacchio <thatlemon@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <e9d47692-ee92-009f-6007-0abc3f502b97@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

show more ...

Merge remote-tracking branch 'remotes/thibault/tags/samuel-thibault' into staging

slirp updates

Prasad J Pandit (2):
slirp: Fix buffer overflow on packet reassembling

Merge remote-tracking branch 'remotes/thibault/tags/samuel-thibault' into staging

slirp updates

Prasad J Pandit (2):
slirp: Fix buffer overflow on packet reassembling

Samuel Thibault (3):
slirp: Add Samuel Thibault's staging tree for slirp
slirp: fix domainname version availability

# gpg: Signature made Fri 08 Jun 2018 07:12:24 BST
# gpg: using RSA key 996849C1CF560478
# gpg: Good signature from "Samuel Thibault <samuel.thibault@aquilenet.fr>"
# gpg: aka "Samuel Thibault <sthibault@debian.org>"
# gpg: aka "Samuel Thibault <samuel.thibault@gnu.org>"
# gpg: aka "Samuel Thibault <samuel.thibault@inria.fr>"
# gpg: aka "Samuel Thibault <samuel.thibault@labri.fr>"
# gpg: aka "Samuel Thibault <samuel.thibault@ens-lyon.org>"
# gpg: aka "Samuel Thibault <samuel.thibault@u-bordeaux.fr>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 900C B024 B679 31D4 0F82 304B D017 8C76 7D06 9EE6
# Subkey fingerprint: 3A3A 5D46 4660 E867 610C A427 9968 49C1 CF56 0478

* remotes/thibault/tags/samuel-thibault:
slirp: reformat m_inc routine
slirp: correct size computation while concatenating mbuf
slirp: fix domainname version availability
slirp: Add Samuel Thibault's staging tree for slirp
slirp: Fix spurious error report when sending directly

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-3.0-pull-request' into staging

move more data to arch specific files
fix SPARC %tick
replace strcpy() by g_strlcpy()

Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-3.0-pull-request' into staging

move more data to arch specific files
fix SPARC %tick
replace strcpy() by g_strlcpy() in syscall.c

# gpg: Signature made Mon 04 Jun 2018 16:19:44 BST
# gpg: using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg: aka "Laurent Vivier <laurent@vivier.eu>"
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/linux-user-for-3.0-pull-request:
linux-user: remove useless #if
linux-user: move hppa signal definitions to hppa/target_signal.h
linux-user: move alpha signal definitions to alpha/target_signal.h
linux-user: move openrisc signal definitions to openrisc/target_signal.h
linux-user: move mips signal definitions to mips/target_signal.h
linux-user: move sparc signal definitions to sparc/target_signal.h
linux-user: move generic signal definitions to generic/signal.h
linux-user: move get_sp_from_cpustate() to target_cpu.h
linux-user: move sparc/sparc64 fcntl definitions to sparc/target_fcntl.h
linux-user: move ppc fcntl definitions to ppc/target_fcntl.h
linux-user: move mips/mips64 fcntl definitions to mips/target_fcntl.h
linux-user: move arm/aarch64/m68k fcntl definitions to [arm|aarch64|m68k]/target_fcntl.h
linux-user: move hppa fcntl definitions to hppa/target_fcntl.h
linux-user: move alpha fcntl definitions to alpha/target_fcntl.h
linux-user: move generic fcntl definitions to generic/fcntl.h
linux-user: SPARC "rd %tick" can be used by user application
syscall: replace strcpy() by g_strlcpy()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

linux-user: move generic signal definitions to generic/signal.h

No code change.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180529194207.31503-10-laurent@vi

linux-user: move generic signal definitions to generic/signal.h

No code change.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180529194207.31503-10-laurent@vivier.eu>

show more ...

linux-user: move get_sp_from_cpustate() to target_cpu.h

Remove useless includes
Fix HPPA include guard.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Acked-by: Richard H

linux-user: move get_sp_from_cpustate() to target_cpu.h

Remove useless includes
Fix HPPA include guard.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180529194207.31503-9-laurent@vivier.eu>

show more ...

Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20180504' into staging

First s390x pull request for 2.13.
- new machine type
- extend SCLP event masks
- support configura

Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20180504' into staging

First s390x pull request for 2.13.
- new machine type
- extend SCLP event masks
- support configuration of consoles via -serial
- firmware improvements: non-sequential entries in boot menu, support
for indirect loading via .INS files in s390-netboot
- bugfixes and cleanups

# gpg: Signature made Fri 04 May 2018 08:19:57 BST
# gpg: using RSA key DECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>"
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# gpg: aka "Cornelia Huck <cohuck@kernel.org>"
# gpg: aka "Cornelia Huck <cohuck@redhat.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF

* remotes/cohuck/tags/s390x-20180504:
pc-bios/s390: Update firmware images
s390-ccw: force diag 308 subcode to unsigned long
pc-bios/s390-ccw/net: Add support for .INS config files
pc-bios/s390-ccw/net: Use diag308 to reset machine before jumping to the OS
pc-bios/s390-ccw/net: Split up net_load() into init, load and release parts
pc-bios/s390-ccw: fix non-sequential boot entries (enum)
pc-bios/s390-ccw: fix non-sequential boot entries (eckd)
pc-bios/s390-ccw: fix loadparm initialization and int conversion
pc-bios/s390-ccw: rename MAX_TABLE_ENTRIES to MAX_BOOT_ENTRIES
pc-bios/s390-ccw: size_t should be unsigned
hw/s390x: Allow to configure the consoles with the "-serial" parameter
s390x/kvm: cleanup calls to cpu_synchronize_state()
vfio-ccw: introduce vfio_ccw_get_device()
s390x/sclp: extend SCLP event masks to 64 bits
s390x: introduce 2.13 compat machine

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/edgar/tags/edgar/xilinx-next-2018-04-30.for-upstream' into staging

edgar/xilinx-next-2018-01.for-upstream

# gpg: Signature made Mon 30 Apr 2018

Merge remote-tracking branch 'remotes/edgar/tags/edgar/xilinx-next-2018-04-30.for-upstream' into staging

edgar/xilinx-next-2018-01.for-upstream

# gpg: Signature made Mon 30 Apr 2018 15:52:35 BST
# gpg: using RSA key 29C596780F6BCA83
# gpg: Good signature from "Edgar E. Iglesias (Xilinx key) <edgar.iglesias@xilinx.com>"
# gpg: aka "Edgar E. Iglesias <edgar.iglesias@gmail.com>"
# Primary key fingerprint: AC44 FEDC 14F7 F1EB EDBF 4151 29C5 9678 0F6B CA83

* remotes/edgar/tags/edgar/xilinx-next-2018-04-30.for-upstream:
target-microblaze: mmu: Make the TLBX MISS bit read-only
target-microblaze: mmu: Make TLBSX write-only
target-microblaze: Don't clobber the IMM reg for ld/st reversed
target-microblaze: Fix trap checks for FPU insns
target-microblaze: Respect MSR.PVR as read-only

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

linux-user: define TARGET_ARCH_HAS_SETUP_FRAME

Instead of calling setup_frame() conditionally to a list of known targets,
define TARGET_ARCH_HAS_SETUP_FRAME if the target provides the fu

linux-user: define TARGET_ARCH_HAS_SETUP_FRAME

Instead of calling setup_frame() conditionally to a list of known targets,
define TARGET_ARCH_HAS_SETUP_FRAME if the target provides the function
and call it only if the macro is defined.

Move declarations of setup_frame() and setup_rt_frame() to
linux-user/signal-common.h

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-21-laurent@vivier.eu>

show more ...

linux-user: move ppc/ppc64 signal.c parts to ppc directory

No code change, only move code from signal.c to
ppc/signal.c, except adding includes and
exporting setup_frame() and setup_

linux-user: move ppc/ppc64 signal.c parts to ppc directory

No code change, only move code from signal.c to
ppc/signal.c, except adding includes and
exporting setup_frame() and setup_rt_frame().

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-20-laurent@vivier.eu>

show more ...

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream-fwcfg' into staging

* Updated fw_cfg option ROM to include DMA support

# gpg: Signature made Thu 14 Jul 2016 14:51:06

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream-fwcfg' into staging

* Updated fw_cfg option ROM to include DMA support

# gpg: Signature made Thu 14 Jul 2016 14:51:06 BST
# gpg: using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream-fwcfg:
Add optionrom compatible with fw_cfg DMA version

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* SCSI scanner support
* fixes to qemu-char and net exit
* FreeBSD fixes
* Other small bugfixes

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* SCSI scanner support
* fixes to qemu-char and net exit
* FreeBSD fixes
* Other small bugfixes

# gpg: Signature made Wed 13 Jul 2016 12:30:11 BST
# gpg: using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream:
hostmem: detect host backend memory is being used properly
hostmem: fix QEMU crash by 'info memdev'
char: do not use atexit cleanup handler
net: do not use atexit for cleanup
slirp: use exit notifier for slirp_smb_cleanup
tap: use an exit notifier to call down_script
util: Fix MIN_NON_ZERO
qemu-sockets: use qapi_free_SocketAddress in cleanup
disas: avoid including everything in headers compiled from C++
json-streamer: fix double-free on exiting during a parse
main-loop: check return value before using pointer
Use "-s" instead of "--quiet" to resolve non-fatal build error on FreeBSD.
scsi-bus: Use longer sense buffer with scanners
scsi-bus: Add SCSI scanner support

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/armbru/tags/pull-include-2016-07-12' into staging

Clean up #include "..." vs <...> and header guards

# gpg: Signature made Tue 12 Jul 2016 15:2

Merge remote-tracking branch 'remotes/armbru/tags/pull-include-2016-07-12' into staging

Clean up #include "..." vs <...> and header guards

# gpg: Signature made Tue 12 Jul 2016 15:23:43 BST
# gpg: using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-include-2016-07-12:
cris: Fix broken header guard in hw/cris/boot.h
Clean up decorations and whitespace around header guards
Clean up ill-advised or unusual header guards
libdecnumber: Don't error out on decNumberLocal.h re-inclusion
libdecnumber: Don't fool around with guards to avoid #include
Clean up header guards that don't match their file name
Drop Emacs local variables lists redundant with .dir-locals.el
spapr_pci: Include spapr.h instead of playing games with #error
tcg: Clean up tcg-target.h header guards
linux-user: Fix broken header guard in syscall_defs.h
linux-user: Clean up hostdep.h header guards
linux-user: Clean up target_structs.h header guards
linux-user: Clean up target_signal.h header guards
linux-user: Clean up target_cpu.h header guards
linux-user: Clean up target_syscall.h header guards
target-*: Clean up cpu.h header guards
scripts: New clean-header-guards.pl
Use #include "..." for our own headers, <...> for others

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

linux-user: Clean up target_signal.h header guards

These headers all use TARGET_SIGNAL_H as header guard symbol. Reuse
of the same guard symbol in multiple headers is okay as long as th

linux-user: Clean up target_signal.h header guards

These headers all use TARGET_SIGNAL_H as header guard symbol. Reuse
of the same guard symbol in multiple headers is okay as long as they
cannot be included together.

Since we can avoid guard symbol reuse easily, do so: use guard symbol
$target_TARGET_SIGNAL_H for linux-user/$target/target_signal.h.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>

show more ...

Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging

# gpg: Signature made Thu 02 Jun 2016 07:23:18 BST using RSA key ID 398D6211
# gpg: Good signature from

Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging

# gpg: Signature made Thu 02 Jun 2016 07:23:18 BST using RSA key ID 398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211

* remotes/jasowang/tags/net-pull-request: (31 commits)
Add ENET device to i.MX6 SOC.
Add ENET/Gbps Ethernet support to FEC device
i.MX: move FEC device to a register array structure.
i.MX: Rename i.MX FEC defines to ENET_XXX
i.MX: reset TX/RX descriptors when FEC is disabled.
i.MX: Fix FEC code for ECR register reset value.
i.MX: Fix FEC code for MDIO address selection
i.MX: Fix FEC code for MDIO operation selection
net: handle optional VLAN header in checksum computation.
net: improve UDP/TCP checksum computation.
e1000e: Introduce qtest for e1000e device
net: Introduce e1000e device emulation
e1000: Move out code that will be reused in e1000e
e1000_regs: Add definitions for Intel 82574-specific bits
vmxnet3: Use pci_dma_* API instead of cpu_physical_memory_*
net_pkt: Extend packet abstraction as required by e1000e functionality
rtl8139: Move more TCP definitions to common header
net_pkt: Name vmxnet3 packet abstractions more generic
vmxnet3: Use common MAC address tracing macros
net: Add macros for MAC address tracing
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/riku/tags/pull-linux-user-20160527' into staging

linux-user pull request v2 for may 2016

# gpg: Signature made Fri 27 May 2016 12:51:10 BST usi

Merge remote-tracking branch 'remotes/riku/tags/pull-linux-user-20160527' into staging

linux-user pull request v2 for may 2016

# gpg: Signature made Fri 27 May 2016 12:51:10 BST using RSA key ID DE3C9BC0
# gpg: Good signature from "Riku Voipio <riku.voipio@iki.fi>"
# gpg: aka "Riku Voipio <riku.voipio@linaro.org>"

* remotes/riku/tags/pull-linux-user-20160527: (38 commits)
linux-user,target-ppc: fix use of MSR_LE
linux-user/signal.c: Use s390 target space address instead of host space
linux-user/signal.c: Use target address instead of host address for microblaze restorer
linux-user/signal.c: Generate opcode data for restorer in setup_rt_frame
linux-user: arm: Remove ARM_cpsr and similar #defines
linux-user: Use direct syscalls for setuid(), etc
linux-user: x86_64: Don't use 16-bit UIDs
linux-user: Use g_try_malloc() in do_msgrcv()
linux-user: Handle msgrcv error case correctly
linux-user: Handle negative values in timespec conversion
linux-user: Use safe_syscall for futex syscall
linux-user: Use safe_syscall for pselect, select syscalls
linux-user: Use safe_syscall for execve syscall
linux-user: Use safe_syscall for wait system calls
linux-user: Use safe_syscall for open and openat system calls
linux-user: Use safe_syscall for read and write system calls
linux-user: Provide safe_syscall for fixing races between signals and syscalls
linux-user: Add debug code to exercise restarting system calls
linux-user: Support for restarting system calls for Microblaze targets
linux-user: Set r14 on exit from microblaze syscall
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

linux-user: Support for restarting system calls for PPC targets

Update the PPC main loop code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn

(We alrea

linux-user: Support for restarting system calls for PPC targets

Update the PPC main loop code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn

(We already handle TARGET_QEMU_ESIGRETURN.)

Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-8-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>

show more ...

Merge qemu-iotests into for-anthony

Revert "Get rid of _t suffix"

In the very least, a change like this requires discussion on the list.

The naming convention is goofy and it causes a massive merge problem. Something

Revert "Get rid of _t suffix"

In the very least, a change like this requires discussion on the list.

The naming convention is goofy and it causes a massive merge problem. Something
like this _must_ be presented on the list first so people can provide input
and cope with it.

This reverts commit 99a0949b720a0936da2052cb9a46db04ffc6db29.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

show more ...

Get rid of _t suffix

Some not so obvious bits, slirp and Xen were left alone for the time
being.

Signed-off-by: malc <av1474@comtv.ru>