Remove qemu-common.h include from most units

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-33-marcandre.lureau@redhat.com>
Signed-off-by: Paolo B

Remove qemu-common.h include from most units

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-33-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

linux-user/alpha: Use force_sig_fault

Use the new function instead of setting up a target_siginfo_t
and calling queue_signal.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Ri

linux-user/alpha: Use force_sig_fault

Use the new function instead of setting up a target_siginfo_t
and calling queue_signal.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-4-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

show more ...

linux-user/alpha: Set FPE_FLTUNK for gentrap ROPRAND

This si_code was changed in 4cc13e4f6d441, for linux 4.17.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderso

linux-user/alpha: Set FPE_FLTUNK for gentrap ROPRAND

This si_code was changed in 4cc13e4f6d441, for linux 4.17.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

show more ...

linux-user/alpha: Set TRAP_UNK for bugchk and unknown gentrap

These si_codes were changed in 535906c684fca, for linux 4.17.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Rich

linux-user/alpha: Set TRAP_UNK for bugchk and unknown gentrap

These si_codes were changed in 535906c684fca, for linux 4.17.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

show more ...

linux-user: Rename TARGET_QEMU_ESIGRETURN to QEMU_ESIGRETURN

This value is fully internal to qemu, and so is not a TARGET define.

Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mat

linux-user: Rename TARGET_QEMU_ESIGRETURN to QEMU_ESIGRETURN

This value is fully internal to qemu, and so is not a TARGET define.

Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

linux-user: Rename TARGET_ERESTARTSYS to QEMU_ERESTARTSYS

This value is fully internal to qemu, and so is not a TARGET define.
We use this as an extra marker for both host and target errno.

Reviewe

linux-user: Rename TARGET_ERESTARTSYS to QEMU_ERESTARTSYS

This value is fully internal to qemu, and so is not a TARGET define.
We use this as an extra marker for both host and target errno.

Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

target/alpha: Implement alpha_cpu_record_sigbus

Record trap_arg{0,1,2} for the linux-user signal frame.

Raise SIGBUS directly from cpu_loop_exit_sigbus, which means
we can remove the code for EXCP_

target/alpha: Implement alpha_cpu_record_sigbus

Record trap_arg{0,1,2} for the linux-user signal frame.

Raise SIGBUS directly from cpu_loop_exit_sigbus, which means
we can remove the code for EXCP_UNALIGN in cpu_loop.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

target/alpha: Implement alpha_cpu_record_sigsegv

Record trap_arg{0,1,2} for the linux-user signal frame.

Fill in the stores to trap_arg{1,2} that were missing
from the previous user-only alpha_cpu_

target/alpha: Implement alpha_cpu_record_sigsegv

Record trap_arg{0,1,2} for the linux-user signal frame.

Fill in the stores to trap_arg{1,2} that were missing
from the previous user-only alpha_cpu_tlb_fill function.
Use maperr to simplify computation of trap_arg1.

Remove the code for EXCP_MMFAULT from cpu_loop, as
that part is now handled by cpu_loop_exit_sigsegv.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

linux-user: Split linux-user internals out of qemu.h

qemu.h is included in various non-linux-user files (which
mostly want the TaskState struct and the functions for
doing usermode access to guest a

linux-user: Split linux-user internals out of qemu.h

qemu.h is included in various non-linux-user files (which
mostly want the TaskState struct and the functions for
doing usermode access to guest addresses like lock_user(),
unlock_user(), get_user*(), etc).

Split out the parts that are only used in linux-user itself
into a new user-internals.h. This leaves qemu.h with basically
three things:
* the definition of the TaskState struct
* the user-access functions and macros
* do_brk()
all of which are needed by code outside linux-user that
includes qemu.h.

The addition of all the extra #include lines was done with
sed -i '/include.*qemu\.h/a #include "user-internals.h"' $(git grep -l 'include.*qemu\.h' linux-user)
(and then undoing the change to fpa11.h).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-8-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

show more ...

linux-user: Split signal-related prototypes into signal-common.h

Split the signal related prototypes into the existing header file
signal-common.h, and include it in those places that now require it

linux-user: Split signal-related prototypes into signal-common.h

Split the signal related prototypes into the existing header file
signal-common.h, and include it in those places that now require it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-4-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

show more ...

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.1-20190612' into staging

ppc patch queue 2019-06-12

Next pull request against qemu-4.1. The big thing here is adding

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.1-20190612' into staging

ppc patch queue 2019-06-12

Next pull request against qemu-4.1. The big thing here is adding
support for hot plug of P2P bridges, and PCI devices under P2P bridges
on the "pseries" machine (which doesn't use SHPC). Other than that
there's just a handful of fixes and small enhancements.

# gpg: Signature made Wed 12 Jun 2019 06:47:56 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-4.1-20190612:
ppc/xive: Make XIVE generate the proper interrupt types
ppc/pnv: activate the "dumpdtb" option on the powernv machine
target/ppc: Use tcg_gen_gvec_bitsel
spapr: Allow hot plug/unplug of PCI bridges and devices under PCI bridges
spapr: Direct all PCI hotplug to host bridge, rather than P2P bridge
spapr: Don't use bus number for building DRC ids
spapr: Clean up DRC index construction
spapr: Clean up spapr_drc_populate_dt()
spapr: Clean up dt creation for PCI buses
spapr: Clean up device tree construction for PCI devices
spapr: Clean up device node name generation for PCI devices
target/ppc: Fix lxvw4x, lxvh8x and lxvb16x
spapr_pci: Improve error message

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/armbru/tags/pull-misc-2019-06-11-v3' into staging

Miscellaneous patches for 2019-06-11

# gpg: Signature made Wed 12 Jun 2019 12:20:41 BST
#

Merge remote-tracking branch 'remotes/armbru/tags/pull-misc-2019-06-11-v3' into staging

Miscellaneous patches for 2019-06-11

# gpg: Signature made Wed 12 Jun 2019 12:20:41 BST
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-misc-2019-06-11-v3:
MAINTAINERS: Polish headline decorations
MAINTAINERS: Improve section headlines
MAINTAINERS: Remove duplicate entries of qemu-devel@nongnu.org
Clean up a header guard symbols (again)
Supply missing header guards
Clean up a few header guard symbols
scripts/clean-header-guards: Fix handling of trailing comments
Normalize position of header guard
Include qemu-common.h exactly where needed
Include qemu/module.h where needed, drop it from qemu-common.h
qemu-common: Move qemu_isalnum() etc. to qemu/ctype.h
qemu-common: Move tcg_enabled() etc. to sysemu/tcg.h

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Include qemu-common.h exactly where needed

No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.

Signed-off-by: Markus Armbruster <a

Include qemu-common.h exactly where needed

No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]

show more ...

target/alpha: Use env_cpu, env_archcpu

Cleanup in the boilerplate that each target must define.
Replace alpha_env_get_cpu with env_archcpu. The combination
CPU(alpha_env_get_cpu) sh

target/alpha: Use env_cpu, env_archcpu

Cleanup in the boilerplate that each target must define.
Replace alpha_env_get_cpu with env_archcpu. The combination
CPU(alpha_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/jnsnow/tags/bitmaps-pull-request' into staging

Pull request

# gpg: Signature made Wed 01 May 2019 21:24:16 BST
# gpg: using

Merge remote-tracking branch 'remotes/jnsnow/tags/bitmaps-pull-request' into staging

Pull request

# gpg: Signature made Wed 01 May 2019 21:24:16 BST
# gpg: using RSA key F9B7ABDBBCACDF95BE76CBD07DEF8106AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" [full]
# Primary key fingerprint: FAEB 9711 A12C F475 812F 18F2 88A9 064D 1835 61EB
# Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76 CBD0 7DEF 8106 AAFC 390E

* remotes/jnsnow/tags/bitmaps-pull-request:
docs/interop/bitmaps: rewrite and modernize doc
Makefile: add nit-picky mode to sphinx-build

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge tag 's390-ccw-bios-2019-04-12' into s390-next-staging

Support for booting from a vfio-ccw passthrough dasd device

# gpg: Signature made Fri 12 Apr 2019 01:17:03 PM CEST
#

Merge tag 's390-ccw-bios-2019-04-12' into s390-next-staging

Support for booting from a vfio-ccw passthrough dasd device

# gpg: Signature made Fri 12 Apr 2019 01:17:03 PM CEST
# gpg: using RSA key 2ED9D774FE702DB5
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [undefined]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [undefined]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]

* tag 's390-ccw-bios-2019-04-12':
pc-bios/s390: Update firmware images
s390-bios: Use control unit type to find bootable devices
s390-bios: Support booting from real dasd device
s390-bios: Add channel command codes/structs needed for dasd-ipl
s390-bios: Use control unit type to determine boot method
s390-bios: Refactor virtio to run channel programs via cio
s390-bios: Factor finding boot device out of virtio code path
s390-bios: Extend find_dev() for non-virtio devices
s390-bios: cio error handling
s390-bios: Support for running format-0/1 channel programs
s390-bios: ptr2u32 and u32toptr
s390-bios: Map low core memory
s390-bios: Decouple channel i/o logic from virtio
s390-bios: Clean up cio.h
s390-bios: decouple common boot logic from virtio
s390-bios: decouple cio setup from virtio
s390 vfio-ccw: Add bootindex property and IPLB data

Signed-off-by: Cornelia Huck <cohuck@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/lersek/tags/edk2-pull-2019-04-22' into staging

Advance the roms/edk2 submodule to the "edk2-stable201903" release, and
build and capture platform fi

Merge remote-tracking branch 'remotes/lersek/tags/edk2-pull-2019-04-22' into staging

Advance the roms/edk2 submodule to the "edk2-stable201903" release, and
build and capture platform firmware binaries from that release. The
binaries are meant to be used by both end-users and by the "BIOS tables"
unit tests in qtest ("make check").

# gpg: Signature made Mon 22 Apr 2019 19:20:08 BST
# gpg: using RSA key D39DA71E0D496CFA
# gpg: Good signature from "Laszlo Ersek <lersek@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: F5D9 660F 1BA5 F310 A95A C5E0 466A EAE0 6125 3988
# Subkey fingerprint: B3A5 5D3F 88A8 90ED 2E63 3E8D D39D A71E 0D49 6CFA

* remotes/lersek/tags/edk2-pull-2019-04-22:
MAINTAINERS: add the "EDK2 Firmware" subsystem
Makefile: install the edk2 firmware images and their descriptors
tests: add missing dependency to build QTEST_QEMU_BINARY, round 2
pc-bios: document the edk2 firmware images; add firmware descriptors
pc-bios: add edk2 firmware binaries and variable store templates
roms: build edk2 firmware binaries and variable store templates
roms/Makefile: replace the $(EDK2_EFIROM) target with "edk2-basetools"
roms/edk2-funcs.sh: add the qemu_edk2_get_thread_count() function
roms/edk2: advance to tag edk2-stable201903
tests/uefi-test-tools/build.sh: work around TianoCore#1607
roms/edk2-funcs.sh: require gcc-4.8+ for building i386 and x86_64
roms: lift "edk2-funcs.sh" from "tests/uefi-test-tools/build.sh"

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/armbru/tags/pull-error-monitor-2019-04-18' into staging

Error reporting & monitor patches for 2019-04-18

# gpg: Signature made Thu 18 Apr 2019

Merge remote-tracking branch 'remotes/armbru/tags/pull-error-monitor-2019-04-18' into staging

Error reporting & monitor patches for 2019-04-18

# gpg: Signature made Thu 18 Apr 2019 21:40:41 BST
# gpg: using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-error-monitor-2019-04-18: (36 commits)
include: Move fprintf_function to disas/
disas: Rename include/disas/bfd.h back to include/disas/dis-asm.h
monitor: Clean up how monitor_disas() funnels output to monitor
qom/cpu: Simplify how CPUClass:cpu_dump_state() prints
qemu-print: New qemu_fprintf(), qemu_vfprintf()
qom/cpu: Simplify how CPUClass::dump_statistics() prints
target/i386: Simplify how x86_cpu_dump_local_apic_state() prints
target: Clean up how the dump_mmu() print
target: Simplify how the TARGET_cpu_list() print
memory: Clean up how mtree_info() prints
block/qapi: Clean up how we print to monitor or stdout
qsp: Simplify how qsp_report() prints
tcg: Simplify how dump_drift_info() prints
tcg: Simplify how dump_exec_info() prints
tcg: Simplify how dump_opcount_info() prints
trace: Simplify how st_print_trace_file_status() prints
include: Include fprintf-fn.h only where needed
monitor: Simplify how -device/device_add print help
char-pty: Print "char device redirected" message to stdout
char: Make -chardev help print to stdout
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

qom/cpu: Simplify how CPUClass:cpu_dump_state() prints

CPUClass method dump_statistics() takes an fprintf()-like callback and
a FILE * to pass to it. Most callers pass fprintf() and std

qom/cpu: Simplify how CPUClass:cpu_dump_state() prints

CPUClass method dump_statistics() takes an fprintf()-like callback and
a FILE * to pass to it. Most callers pass fprintf() and stderr.
log_cpu_state() passes fprintf() and qemu_log_file.
hmp_info_registers() passes monitor_fprintf() and the current monitor
cast to FILE *. monitor_fprintf() casts it right back, and is
otherwise identical to monitor_printf().

The callback gets passed around a lot, which is tiresome. The
type-punning around monitor_fprintf() is ugly.

Drop the callback, and call qemu_fprintf() instead. Also gets rid of
the type-punning, since qemu_fprintf() takes NULL instead of the
current monitor cast to FILE *.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-15-armbru@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/mdroth/tags/qga-pull-2018-11-12-tag' into staging

qemu-ga patch queue for 3.1.0

* add missing #include guards for guest-agent-core.h
* fix

Merge remote-tracking branch 'remotes/mdroth/tags/qga-pull-2018-11-12-tag' into staging

qemu-ga patch queue for 3.1.0

* add missing #include guards for guest-agent-core.h
* fix leaks introduced with recent win32 enablement of disk info in
guest-get-fsinfo

# gpg: Signature made Tue 13 Nov 2018 02:52:12 GMT
# gpg: using RSA key 3353C9CEF108B584
# gpg: Good signature from "Michael Roth <flukshun@gmail.com>"
# gpg: aka "Michael Roth <mdroth@utexas.edu>"
# gpg: aka "Michael Roth <mdroth@linux.vnet.ibm.com>"
# Primary key fingerprint: CEAC C9E1 5534 EBAB B82D 3FA0 3353 C9CE F108 B584

* remotes/mdroth/tags/qga-pull-2018-11-12-tag:
qga: Add multiple include guard to guest-agent-core.h
qga-win: fix leaks of build_guest_disk_info()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-3.1-pull-request' into staging

- gdb signal handling fix
- add SO_REUSEPORT
- remove dead-code

# gpg: Signa

Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-3.1-pull-request' into staging

- gdb signal handling fix
- add SO_REUSEPORT
- remove dead-code

# gpg: Signature made Mon 12 Nov 2018 20:48:23 GMT
# gpg: using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg: aka "Laurent Vivier <laurent@vivier.eu>"
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/linux-user-for-3.1-pull-request:
linux-user: Add support for SO_REUSEPORT
linux-user: Clean up nios2 main loop signal handling
linux-user: Don't call gdb_handlesig() before queue_signal()
linux-user: Remove dead error-checking code

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

linux-user: Don't call gdb_handlesig() before queue_signal()

The CPU main-loop routines for linux-user generally
call gdb_handlesig() when they're about to queue a
SIGTRAP signal. Th

linux-user: Don't call gdb_handlesig() before queue_signal()

The CPU main-loop routines for linux-user generally
call gdb_handlesig() when they're about to queue a
SIGTRAP signal. This is wrong, because queue_signal()
will cause us to pend a signal, and process_pending_signals()
will then call gdb_handlesig() itself. So the effect is that
we notify gdb of the SIGTRAP, and then if gdb says "OK,
continue with signal X" we will incorrectly notify
gdb of the signal X as well. We don't do this double-notify
for anything else, only SIGTRAP.

Remove this unnecessary and incorrect code from all
the targets except for nios2 (whose main loop is
doing something different and broken, and will be handled
in a separate patch).

This bug only manifests if the user responds to the reported
SIGTRAP using "signal SIGFOO" rather than "continue"; since
the latter is the overwhelmingly common thing to do after a
breakpoint most people won't have hit this.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20181019174958.26616-2-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

show more ...

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- Copy offloading fixes for when the copy increases the image size
- Temporary r

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- Copy offloading fixes for when the copy increases the image size
- Temporary revert of the removal of deprecated -drive options
- Fix request serialisation in the image fleecing scenario
- Fix copy-on-read crash with unaligned image size
- Fix another drain crash

# gpg: Signature made Tue 10 Jul 2018 16:37:52 BST
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream: (24 commits)
block: Use common write req handling in truncate
block: Fix bdrv_co_truncate overlap check
block: Use common req handling in copy offloading
block: Use common req handling for discard
block: Fix handling of image enlarging write
block: Extract common write req handling
block: Use uint64_t for BdrvTrackedRequest byte fields
block: Use BdrvChild to discard
block: Add copy offloading trace points
block: Prefix file driver trace points with "file_"
Revert "block: Remove deprecated -drive geometry options"
Revert "block: Remove deprecated -drive option addr"
Revert "block: Remove deprecated -drive option serial"
Revert "block: Remove dead deprecation warning code"
block/blklogwrites: Make sure the log sector size is not too small
qapi/block-core.json: Add missing documentation for blklogwrites log-append option
block/backup: fix fleecing scheme: use serialized writes
block: add BDRV_REQ_SERIALISING flag
block: split flags in copy_range
block/io: fix copy_range
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-3.0-pull-request' into staging

Sanitize linux-user stdout

# gpg: Signature made Tue 10 Jul 2018 07:23:34 BST
#

Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-3.0-pull-request' into staging

Sanitize linux-user stdout

# gpg: Signature made Tue 10 Jul 2018 07:23:34 BST
# gpg: using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg: aka "Laurent Vivier <laurent@vivier.eu>"
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/linux-user-for-3.0-pull-request:
linux-user: Report error message on stderr, rather than stdout
linux-user: Do not report "syscall not implemented" by default
linux-user: Do not report "Unsupported syscall" by default

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

linux-user: Report error message on stderr, rather than stdout

Code change produced with:

git ls-files linux-user | \
xargs sed -i -E 's/(\s+)printf\s*\(("Unhandled.*)\);/\1

linux-user: Report error message on stderr, rather than stdout

Code change produced with:

git ls-files linux-user | \
xargs sed -i -E 's/(\s+)printf\s*\(("Unhandled.*)\);/\1fprintf(stderr, \2);/g'

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180706155127.7483-4-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

show more ...