sysemu/kvm: Restrict kvmppc_get_radix_page_info() to ppc targets

kvm_get_radix_page_info() is only defined for ppc targets (in
target/ppc/kvm.c). The declaration is not useful in other targets,
redu

sysemu/kvm: Restrict kvmppc_get_radix_page_info() to ppc targets

kvm_get_radix_page_info() is only defined for ppc targets (in
target/ppc/kvm.c). The declaration is not useful in other targets,
reduce its scope.
Rename using the 'kvmppc_' prefix following other declarations
from target/ppc/kvm_ppc.h.

Suggested-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20231003070427.69621-2-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

show more ...

kvm: i386: require KVM_CAP_SET_VCPU_EVENTS and KVM_CAP_X86_ROBUST_SINGLESTEP

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

kvm: i386: require KVM_CAP_DEBUGREGS

This was introduced in KVM in Linux 2.6.35, we can require it unconditionally.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

kvm: require KVM_CAP_IOEVENTFD and KVM_CAP_IOEVENTFD_ANY_LENGTH

KVM_CAP_IOEVENTFD_ANY_LENGTH was added in Linux 4.4, released in 2016.
Assume that it is present.

Signed-off-by: Paolo Bonzini <pbonz

kvm: require KVM_CAP_IOEVENTFD and KVM_CAP_IOEVENTFD_ANY_LENGTH

KVM_CAP_IOEVENTFD_ANY_LENGTH was added in Linux 4.4, released in 2016.
Assume that it is present.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

kvm: assume that many ioeventfds can be created

NR_IOBUS_DEVS was increased to 200 in Linux 2.6.34. By Linux 3.5 it had
increased to 1000 and later ioeventfds were changed to not count against
the

kvm: assume that many ioeventfds can be created

NR_IOBUS_DEVS was increased to 200 in Linux 2.6.34. By Linux 3.5 it had
increased to 1000 and later ioeventfds were changed to not count against
the limit. But the earlier limit of 200 would already be enough for
kvm_check_many_ioeventfds() to be true, so remove the check.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

kvm: drop reference to KVM_CAP_PCI_2_3

This is a remnant of pre-VFIO device assignment; it is not defined
anymore by Linux and not used by QEMU.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

kvm: require KVM_IRQFD for kernel irqchip

KVM_IRQFD was introduced in Linux 2.6.32, and since then it has always been
available on architectures that support an in-kernel interrupt controller.
We ca

kvm: require KVM_IRQFD for kernel irqchip

KVM_IRQFD was introduced in Linux 2.6.32, and since then it has always been
available on architectures that support an in-kernel interrupt controller.
We can require it unconditionally.

Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

kvm: require KVM_IRQFD for kernel irqchip

KVM_IRQFD was introduced in Linux 2.6.32, and since then it has always been
available on architectures that support an in-kernel interrupt controller.
We ca

kvm: require KVM_IRQFD for kernel irqchip

KVM_IRQFD was introduced in Linux 2.6.32, and since then it has always been
available on architectures that support an in-kernel interrupt controller.
We can require it unconditionally.

Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

kvm: require KVM_CAP_SIGNAL_MSI

This was introduced in KVM in Linux 3.5, we can require it unconditionally
in kvm_irqchip_send_msi(). However, not all architectures have to implement
it so check it

kvm: require KVM_CAP_SIGNAL_MSI

This was introduced in KVM in Linux 3.5, we can require it unconditionally
in kvm_irqchip_send_msi(). However, not all architectures have to implement
it so check it only in x86, the only architecture that ever had MSI injection
but not KVM_CAP_SIGNAL_MSI.

ARM uses it to detect the presence of the ITS emulation in the kernel,
introduced in Linux 4.8. Assume that it's there and possibly fail when
realizing the arm-its-kvm device.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

kvm: Add stub for kvm_get_max_memslots()

We'll need the stub soon from memory device context.

While at it, use "unsigned int" as return value and place the
declaration next to kvm_get_free_memslots

kvm: Add stub for kvm_get_max_memslots()

We'll need the stub soon from memory device context.

While at it, use "unsigned int" as return value and place the
declaration next to kvm_get_free_memslots().

Message-ID: <20230926185738.277351-11-david@redhat.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>

show more ...

kvm: Return number of free memslots

Let's return the number of free slots instead of only checking if there
is a free slot. While at it, check all address spaces, which will also
consider SMM under

kvm: Return number of free memslots

Let's return the number of free slots instead of only checking if there
is a free slot. While at it, check all address spaces, which will also
consider SMM under x86 correctly.

This is a preparation for memory devices that consume multiple memslots.

Message-ID: <20230926185738.277351-5-david@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>

show more ...

sysemu/kvm: Restrict kvm_pc_setup_irq_routing() to x86 targets

kvm_pc_setup_irq_routing() is only defined for x86 targets (in
hw/i386/kvm/apic.c). Its declaration is pointless on all
other targets.

sysemu/kvm: Restrict kvm_pc_setup_irq_routing() to x86 targets

kvm_pc_setup_irq_routing() is only defined for x86 targets (in
hw/i386/kvm/apic.c). Its declaration is pointless on all
other targets.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230904124325.79040-14-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

sysemu/kvm: Restrict kvm_has_pit_state2() to x86 targets

kvm_has_pit_state2() is only defined for x86 targets (in
target/i386/kvm/kvm.c). Its declaration is pointless on
all other targets. Have it r

sysemu/kvm: Restrict kvm_has_pit_state2() to x86 targets

kvm_has_pit_state2() is only defined for x86 targets (in
target/i386/kvm/kvm.c). Its declaration is pointless on
all other targets. Have it return a boolean.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230904124325.79040-13-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

sysemu/kvm: Restrict kvm_get_apic_state() to x86 targets

kvm_get_apic_state() is only defined for x86 targets (in
hw/i386/kvm/apic.c). Its declaration is pointless on all
other targets.

Since we in

sysemu/kvm: Restrict kvm_get_apic_state() to x86 targets

kvm_get_apic_state() is only defined for x86 targets (in
hw/i386/kvm/apic.c). Its declaration is pointless on all
other targets.

Since we include "linux-headers/asm-x86/kvm.h", no need
to forward-declare 'struct kvm_lapic_state'.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230904124325.79040-12-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

sysemu/kvm: Restrict kvm_arch_get_supported_cpuid/msr() to x86 targets

kvm_arch_get_supported_cpuid() / kvm_arch_get_supported_msr_feature()
are only defined for x86 targets (in target/i386/kvm/kvm.

sysemu/kvm: Restrict kvm_arch_get_supported_cpuid/msr() to x86 targets

kvm_arch_get_supported_cpuid() / kvm_arch_get_supported_msr_feature()
are only defined for x86 targets (in target/i386/kvm/kvm.c). Their
declarations are pointless on other targets.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230904124325.79040-11-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

sysemu/kvm: Use vaddr for kvm_arch_[insert|remove]_hw_breakpoint

Changes the signature of the target-defined functions for
inserting/removing kvm hw breakpoints. The address and length arguments
are

sysemu/kvm: Use vaddr for kvm_arch_[insert|remove]_hw_breakpoint

Changes the signature of the target-defined functions for
inserting/removing kvm hw breakpoints. The address and length arguments
are now of vaddr type, which both matches the type used internally in
accel/kvm/kvm-all.c and makes the api target-agnostic.

Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230807155706.9580-4-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

accel/kvm: Widen pc/saved_insn for kvm_sw_breakpoint

Widens the pc and saved_insn fields of kvm_sw_breakpoint from
target_ulong to vaddr. The pc argument of kvm_find_sw_breakpoint is also
widened to

accel/kvm: Widen pc/saved_insn for kvm_sw_breakpoint

Widens the pc and saved_insn fields of kvm_sw_breakpoint from
target_ulong to vaddr. The pc argument of kvm_find_sw_breakpoint is also
widened to match.

Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230807155706.9580-2-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

kvm: Introduce kvm_arch_get_default_type hook

kvm_arch_get_default_type() returns the default KVM type. This hook is
particularly useful to derive a KVM type that is valid for "none"
machine model,

kvm: Introduce kvm_arch_get_default_type hook

kvm_arch_get_default_type() returns the default KVM type. This hook is
particularly useful to derive a KVM type that is valid for "none"
machine model, which is used by libvirt to probe the availability of
KVM.

For MIPS, the existing mips_kvm_type() is reused. This function ensures
the availability of VZ which is mandatory to use KVM on the current
QEMU.

Cc: qemu-stable@nongnu.org
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20230727073134.134102-2-akihiko.odaki@daynix.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: added doc comment for new function]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>

show more ...

kvm: Introduce kvm_arch_get_default_type hook

kvm_arch_get_default_type() returns the default KVM type. This hook is
particularly useful to derive a KVM type that is valid for "none"
machine model,

kvm: Introduce kvm_arch_get_default_type hook

kvm_arch_get_default_type() returns the default KVM type. This hook is
particularly useful to derive a KVM type that is valid for "none"
machine model, which is used by libvirt to probe the availability of
KVM.

For MIPS, the existing mips_kvm_type() is reused. This function ensures
the availability of VZ which is mandatory to use KVM on the current
QEMU.

Cc: qemu-stable@nongnu.org
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20230727073134.134102-2-akihiko.odaki@daynix.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: added doc comment for new function]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit 5e0d65909c6f335d578b90491e165440c99adf81)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

show more ...

accel/kvm: Re-include "exec/memattrs.h" header

Commit 1e05888ab5 ("sysemu/kvm: Remove unused headers") was
a bit overzealous while cleaning "sysemu/kvm.h" headers:
kvm_arch_post_run() returns a MemT

accel/kvm: Re-include "exec/memattrs.h" header

Commit 1e05888ab5 ("sysemu/kvm: Remove unused headers") was
a bit overzealous while cleaning "sysemu/kvm.h" headers:
kvm_arch_post_run() returns a MemTxAttrs type, so depends on
"exec/memattrs.h" for its definition.

Fixes: 1e05888ab5 ("sysemu/kvm: Remove unused headers")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230619074153.44268-5-philmd@linaro.org>

show more ...

accel: Document generic accelerator headers

These headers are meant to be include by any file to check
the availability of accelerators, thus are not accelerator
specific.

Signed-off-by: Philippe M

accel: Document generic accelerator headers

These headers are meant to be include by any file to check
the availability of accelerators, thus are not accelerator
specific.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230624174121.11508-3-philmd@linaro.org>

show more ...

sysemu/kvm: Remove unused headers

All types used are forward-declared in "qemu/typedefs.h".

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230405160454.97436-2-philmd@lina

sysemu/kvm: Remove unused headers

All types used are forward-declared in "qemu/typedefs.h".

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230405160454.97436-2-philmd@linaro.org>
[thuth: Add hw/core/cpu.h to migration/dirtyrate.c to fix compile failure]
Signed-off-by: Thomas Huth <thuth@redhat.com>

show more ...

sysemu/kvm: Remove CONFIG_USER_ONLY guard

User emulation shouldn't really include this header; if included
these declarations are guarded by CONFIG_KVM_IS_POSSIBLE.

Signed-off-by: Philippe Mathieu-

sysemu/kvm: Remove CONFIG_USER_ONLY guard

User emulation shouldn't really include this header; if included
these declarations are guarded by CONFIG_KVM_IS_POSSIBLE.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221216220738.7355-2-philmd@linaro.org>

show more ...

kvm: allow target-specific accelerator properties

Several hypervisor capabilities in KVM are target-specific. When exposed
to QEMU users as accelerator properties (i.e. -accel kvm,prop=value), they

kvm: allow target-specific accelerator properties

Several hypervisor capabilities in KVM are target-specific. When exposed
to QEMU users as accelerator properties (i.e. -accel kvm,prop=value), they
should not be available for all targets.

Add a hook for targets to add their own properties to -accel kvm, for
now no such property is defined.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220929072014.20705-3-chenyi.qiang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

accel/kvm: move kvm_update_guest_debug to inline stub

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-47-alex.bennee@linaro.org>