hw/arm/aspeed: Allow machine to set UART default

When you run QEMU with an Aspeed machine and a single serial device
using stdio like this:

qemu -machine ast2600-evb -drive ... -serial stdio

T

hw/arm/aspeed: Allow machine to set UART default

When you run QEMU with an Aspeed machine and a single serial device
using stdio like this:

qemu -machine ast2600-evb -drive ... -serial stdio

The guest OS can read and write to the UART5 registers at 0x1E784000 and
it will receive from stdin and write to stdout. The Aspeed SoC's have a
lot more UART's though (AST2500 has 5, AST2600 has 13) and depending on
the board design, may be using any of them as the serial console. (See
"stdout-path" in a DTS to check which one is chosen).

Most boards, including all of those currently defined in
hw/arm/aspeed.c, just use UART5, but some use UART1. This change adds
some flexibility for different boards without requiring users to change
their command-line invocation of QEMU.

I tested this doesn't break existing code by booting an AST2500 OpenBMC
image and an AST2600 OpenBMC image, each using UART5 as the console.

Then I tested switching the default to UART1 and booting an AST2600
OpenBMC image that uses UART1, and that worked too.

Signed-off-by: Peter Delevoryas <pdel@fb.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20210901153615.2746885-2-pdel@fb.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

show more ...

Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20200910' into staging

This PR includes multiple fixes and features for RISC-V:
- Fixes a bug in printing trap ca

Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20200910' into staging

This PR includes multiple fixes and features for RISC-V:
- Fixes a bug in printing trap causes
- Allows 16-bit writes to the SiFive test device. This fixes the
failure to reboot the RISC-V virt machine
- Support for the Microchip PolarFire SoC and Icicle Kit
- A reafactor of RISC-V code out of hw/riscv

# gpg: Signature made Thu 10 Sep 2020 19:08:06 BST
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054

* remotes/alistair/tags/pull-riscv-to-apply-20200910: (30 commits)
hw/riscv: Sort the Kconfig options in alphabetical order
hw/riscv: Drop CONFIG_SIFIVE
hw/riscv: Always build riscv_hart.c
hw/riscv: Move sifive_test model to hw/misc
hw/riscv: Move sifive_uart model to hw/char
hw/riscv: Move riscv_htif model to hw/char
hw/riscv: Move sifive_plic model to hw/intc
hw/riscv: Move sifive_clint model to hw/intc
hw/riscv: Move sifive_gpio model to hw/gpio
hw/riscv: Move sifive_u_otp model to hw/misc
hw/riscv: Move sifive_u_prci model to hw/misc
hw/riscv: Move sifive_e_prci model to hw/misc
hw/riscv: sifive_u: Connect a DMA controller
hw/riscv: clint: Avoid using hard-coded timebase frequency
hw/riscv: microchip_pfsoc: Hook GPIO controllers
hw/riscv: microchip_pfsoc: Connect 2 Cadence GEMs
hw/arm: xlnx: Set all boards' GEM 'phy-addr' property value to 23
hw/net: cadence_gem: Add a new 'phy-addr' property
hw/riscv: microchip_pfsoc: Connect a DMA controller
hw/dma: Add SiFive platform DMA controller emulation
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
# hw/riscv/trace-events

show more ...

Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-fixes-100920-1' into staging

Various misc and testing fixes:

- Expand CODING_STYLE.rst a little more
- usb-ho

Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-fixes-100920-1' into staging

Various misc and testing fixes:

- Expand CODING_STYLE.rst a little more
- usb-host build fix
- allow check-softfloat unit tests without TCG
- simplify mips imm_branch so compiler isn't confused
- mark ppc64abi32 for deprecation
- more compiler soothing in pch_rev_id
- allow acceptance to skip missing binaries
- more a bunch of plugins to contrib

# gpg: Signature made Thu 10 Sep 2020 10:51:05 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44

* remotes/stsquad/tags/pull-testing-fixes-100920-1:
plugins: move the more involved plugins to contrib
tests/acceptance: Add Test.fetch_asset(cancel_on_missing=True)
tests: bump avocado version
hw/i386: make explicit clearing of pch_rev_id
configure: don't enable ppc64abi32-linux-user by default
docs/system/deprecated: mark ppc64abi32-linux-user for deprecation
target/mips: simplify gen_compute_imm_branch logic
tests/meson.build: fp tests don't need CONFIG_TCG
usb-host: restrict workaround to new libusb versions
CODING_STYLE.rst: flesh out our naming conventions.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/berrange-gitlab/tags/crypt-perf-pull-request' into staging

Improve performance of crypto cipher subsystem

# gpg: Signature made Thu 10 Sep 2020

Merge remote-tracking branch 'remotes/berrange-gitlab/tags/crypt-perf-pull-request' into staging

Improve performance of crypto cipher subsystem

# gpg: Signature made Thu 10 Sep 2020 11:05:18 BST
# gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF

* remotes/berrange-gitlab/tags/crypt-perf-pull-request:
crypto/gcrypt: Split QCryptoCipherGcrypt into subclasses
crypto/nettle: Split QCryptoCipherNettle into subclasses
crypto/builtin: Split QCryptoCipherBuiltin into subclasses
crypto/builtin: Split and simplify AES_encrypt_cbc
crypto/builtin: Move AES_cbc_encrypt into cipher-builtin.inc.c
crypto/builtin: Merge qcrypto_cipher_aes_{ecb,xts}_{en,de}crypt
crypto/builtin: Remove odd-sized AES block handling
crypto: Constify cipher data tables
crypto: Move cipher->driver init to qcrypto_*_cipher_ctx_new
crypto: Allocate QCryptoCipher with the subclass
crypto: Use the correct const type for driver
crypto: Move QCryptoCipherDriver typedef to crypto/cipher.h
crypto/nettle: Fix xts_encrypt arguments
crypto: Remove redundant includes
crypto: Rename cipher include files to .c.inc
crypto: Assume blocksize is a power of 2
tests: fix output message formatting for crypto benchmarks

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-5.2-pull-request' into staging

trivial patches pull request 20200911

# gpg: Signature made Fri 11 Sep 2020 20:3

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-5.2-pull-request' into staging

trivial patches pull request 20200911

# gpg: Signature made Fri 11 Sep 2020 20:32:27 BST
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-branch-for-5.2-pull-request:
target/i386/kvm: Add missing fallthrough comment
util/hexdump: Reorder qemu_hexdump() arguments
util/hexdump: Convert to take a void pointer argument
hw/arm/pxa2xx: Add missing fallthrough comment
target/i386/kvm: Rename host_tsx_blacklisted() as host_tsx_broken()
test-vmstate: remove unnecessary code in match_interval_mapping_node
hw: hyperv: vmbus: Fix 32bit compilation
kconfig: fix comment referring to old Makefiles
meson.build: tweak sdl-image error message
hw/net/e1000e: Remove duplicated write handler for FLSWDATA register
hw/net/e1000e: Remove overwritten read handler for STATUS register
Makefile: Skip the meson subdir in cscope/TAGS/ctags
Makefile: Drop extra phony cscope
hw/gpio/max7310: Replace disabled printf() by qemu_log_mask(UNIMP)
hw/gpio/omap_gpio: Replace fprintf() by qemu_log_mask(GUEST_ERROR)
hw/acpi/tco: Remove unused definitions
hw/isa/isa-bus: Replace hw_error() by assert()
hw/mips/fuloong2e: Convert pointless error message to an assert()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
# net/colo-compare.c

show more ...

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

QOM boilerplate cleanup

Documentation build fix:
* memory: Remove kernel-doc comment

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

QOM boilerplate cleanup

Documentation build fix:
* memory: Remove kernel-doc comment marker (Eduardo Habkost)

QOM cleanups:
* Rename QOM macros for consistency between
TYPE_* and type checking constants (Eduardo Habkost)

QOM new macros:
* OBJECT_DECLARE_* and OBJECT_DEFINE_* macros (Daniel P. Berrangé)
* DECLARE_*_CHECKER macros (Eduardo Habkost)

Automated QOM boilerplate changes:
* Automated changes to use DECLARE_*_CHECKER (Eduardo Habkost
* Automated changes to use OBJECT_DECLARE* (Eduardo Habkost)

# gpg: Signature made Thu 10 Sep 2020 19:17:49 BST
# gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg: issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/machine-next-pull-request: (33 commits)
virtio-vga: Use typedef name for instance_size
vhost-user-vga: Use typedef name for instance_size
xilinx_axienet: Use typedef name for instance_size
lpc_ich9: Use typedef name for instance_size
omap_intc: Use typedef name for instance_size
xilinx_axidma: Use typedef name for instance_size
tusb6010: Rename TUSB to TUSB6010
pc87312: Rename TYPE_PC87312_SUPERIO to TYPE_PC87312
vfio: Rename PCI_VFIO to VFIO_PCI
usb: Rename USB_SERIAL_DEV to USB_SERIAL
sabre: Rename SABRE_DEVICE to SABRE
rs6000_mc: Rename RS6000MC_DEVICE to RS6000MC
filter-rewriter: Rename FILTER_COLO_REWRITER to FILTER_REWRITER
esp: Rename ESP_STATE to ESP
ahci: Rename ICH_AHCI to ICH9_AHCI
vmgenid: Rename VMGENID_DEVICE to TYPE_VMGENID
vfio: Rename VFIO_AP_DEVICE_TYPE to TYPE_VFIO_AP_DEVICE
dev-smartcard-reader: Rename CCID_DEV_NAME to TYPE_USB_CCID_DEV
ap-device: Rename AP_DEVICE_TYPE to TYPE_AP_DEVICE
gpex: Fix type checking function name
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Use DECLARE_*CHECKER* macros

Generated using:

$ ./scripts/codeconverter/converter.py -i \
--pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]')

Reviewed-by: Daniel

Use DECLARE_*CHECKER* macros

Generated using:

$ ./scripts/codeconverter/converter.py -i \
--pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]')

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-12-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-13-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-14-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

show more ...

Move QOM typedefs and add missing includes

Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with O

Move QOM typedefs and add missing includes

Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TYPE.

Patch generated using:

$ ./scripts/codeconverter/converter.py -i \
--pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]')

which will split "typdef struct { ... } TypedefName"
declarations.

Followed by:

$ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \
$(git grep -l '' -- '*.[ch]')

which will:
- move the typedefs and #defines above the type check macros
- add missing #include "qom/object.h" lines if necessary

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-9-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-10-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-11-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2020-06-24' into staging

Block patches:
- Two iotest fixes

# gpg: Signature made Wed 24 Jun 2020 09:00:51 BST

Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2020-06-24' into staging

Block patches:
- Two iotest fixes

# gpg: Signature made Wed 24 Jun 2020 09:00:51 BST
# gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg: issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40

* remotes/maxreitz/tags/pull-block-2020-06-24:
iotests: don't test qcow2.py inside 291
iotests: Fix 051 output after qdev_init_nofail() removal

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200626' into staging

target-arm queue:
* hw/arm/aspeed: improve QOM usage
* hw/misc/pca9552: trace GPIO change

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200626' into staging

target-arm queue:
* hw/arm/aspeed: improve QOM usage
* hw/misc/pca9552: trace GPIO change events
* target/arm: Implement ARMv8.5-MemTag for system emulation

# gpg: Signature made Fri 26 Jun 2020 16:13:27 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20200626: (57 commits)
target/arm: Enable MTE
target/arm: Add allocation tag storage for system mode
target/arm: Create tagged ram when MTE is enabled
target/arm: Cache the Tagged bit for a page in MemTxAttrs
target/arm: Always pass cacheattr to get_phys_addr
target/arm: Set PSTATE.TCO on exception entry
target/arm: Implement data cache set allocation tags
target/arm: Complete TBI clearing for user-only for SVE
target/arm: Add mte helpers for sve scatter/gather memory ops
target/arm: Handle TBI for sve scalar + int memory ops
target/arm: Add mte helpers for sve scalar + int ff/nf loads
target/arm: Add mte helpers for sve scalar + int stores
target/arm: Add mte helpers for sve scalar + int loads
target/arm: Add arm_tlb_bti_gp
target/arm: Tidy trans_LD1R_zpri
target/arm: Use mte_check1 for sve LD1R
target/arm: Use mte_checkN for sve unpredicated stores
target/arm: Use mte_checkN for sve unpredicated loads
target/arm: Add helper_mte_check_zva
target/arm: Implement helper_mte_checkN
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/arm/aspeed: QOM'ify AspeedMachineState

AspeedMachineState seems crippled. We use incorrectly 2
different structures to do the same thing. Merge them
altogether:
- Move AspeedM

hw/arm/aspeed: QOM'ify AspeedMachineState

AspeedMachineState seems crippled. We use incorrectly 2
different structures to do the same thing. Merge them
altogether:
- Move AspeedMachine fields to AspeedMachineState
- AspeedMachineState is now QOM
- Remove unused AspeedMachine structure

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20200623072132.2868-4-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/arm/aspeed: Rename AspeedBoardState as AspeedMachineState

To have a more consistent naming, rename AspeedBoardState
as AspeedMachineState.

Suggested-by: Cédric Le Goater <clg

hw/arm/aspeed: Rename AspeedBoardState as AspeedMachineState

To have a more consistent naming, rename AspeedBoardState
as AspeedMachineState.

Suggested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20200623072132.2868-3-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/xtensa/tags/20200625-xtensa' into staging

target/xtensa fixes for 5.1:

- fix access to special registers missing in the core configuration;

Merge remote-tracking branch 'remotes/xtensa/tags/20200625-xtensa' into staging

target/xtensa fixes for 5.1:

- fix access to special registers missing in the core configuration;
- fix simcall opcode behavior for new hardware;
- drop gen_io_end call from xtensa translator.

# gpg: Signature made Thu 25 Jun 2020 09:08:58 BST
# gpg: using RSA key 2B67854B98E5327DCDEB17D851F9CC91F83FA044
# gpg: issuer "jcmvbkbc@gmail.com"
# gpg: Good signature from "Max Filippov <filippov@cadence.com>" [unknown]
# gpg: aka "Max Filippov <max.filippov@cogentembedded.com>" [full]
# gpg: aka "Max Filippov <jcmvbkbc@gmail.com>" [full]
# Primary key fingerprint: 2B67 854B 98E5 327D CDEB 17D8 51F9 CC91 F83F A044

* remotes/xtensa/tags/20200625-xtensa:
target/xtensa: drop gen_io_end call
target/xtensa: fix simcall for newer hardware
target/xtensa: fetch HW version from configuration overlay
target/xtensa: work around missing SR definitions

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-plugin-160620-2' into staging

Testing and plugin updates

- clear up dtc warnings
- add support for --enab

Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-plugin-160620-2' into staging

Testing and plugin updates

- clear up dtc warnings
- add support for --enable-tsan builds
- re-enable shippable cross builds
- serialise cirrus check steps
- fix check-tcg plugin issues
- add lockstep plugin

# gpg: Signature made Tue 16 Jun 2020 14:50:09 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44

* remotes/stsquad/tags/pull-testing-and-plugin-160620-2: (21 commits)
plugins: new lockstep plugin for debugging TCG changes
tests/tcg: ensure -cpu max also used for plugin run
tests/tcg: build plugin list from contents of src directory
cirrus.yml: serialise make check
Revert ".shippable: temporaily disable some cross builds"
tests: Disable select tests under TSan, which hit TSan issue.
docs: Added details on TSan to testing.rst
util: Added tsan annotate for thread name.
include/qemu: Added tsan.h for annotations.
tests/docker: Added docker build support for TSan.
thread: add tsan annotations to QemuSpin
translate-all: call qemu_spin_destroy for PageDesc
tcg: call qemu_spin_destroy for tb->jmp_lock
qht: call qemu_spin_destroy for head buckets
cputlb: destroy CPUTLB with tlb_destroy
thread: add qemu_spin_destroy
cpu: convert queued work to a QSIMPLEQ
configure: add --enable-tsan flag + fiber annotations for coroutine-ucontext
Makefile: remove old compatibility gunks
Makefile: dtc: update, build the libfdt target
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200616' into staging

* hw: arm: Set vendor property for IMX SDHCI emulations
* sd: sdhci: Implement basic vendor s

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200616' into staging

* hw: arm: Set vendor property for IMX SDHCI emulations
* sd: sdhci: Implement basic vendor specific register support
* hw/net/imx_fec: Convert debug fprintf() to trace events
* target/arm/cpu: adjust virtual time for all KVM arm cpus
* Implement configurable descriptor size in ftgmac100
* hw/misc/imx6ul_ccm: Implement non writable bits in CCM registers
* target/arm: More Neon decodetree conversion work

# gpg: Signature made Tue 16 Jun 2020 10:56:10 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20200616: (23 commits)
hw: arm: Set vendor property for IMX SDHCI emulations
sd: sdhci: Implement basic vendor specific register support
hw/net/imx_fec: Convert debug fprintf() to trace events
target/arm/cpu: adjust virtual time for all KVM arm cpus
Implement configurable descriptor size in ftgmac100
hw/misc/imx6ul_ccm: Implement non writable bits in CCM registers
target/arm: Convert Neon VDUP (scalar) to decodetree
target/arm: Convert Neon VTBL, VTBX to decodetree
target/arm: Convert Neon VEXT to decodetree
target/arm: Convert Neon 2-reg-scalar long multiplies to decodetree
target/arm: Convert Neon 2-reg-scalar VQRDMLAH, VQRDMLSH to decodetree
target/arm: Convert Neon 2-reg-scalar VQDMULH, VQRDMULH to decodetree
target/arm: Convert Neon 2-reg-scalar float multiplies to decodetree
target/arm: Convert Neon 2-reg-scalar integer multiplies to decodetree
target/arm: Add missing TCG temp free in do_2shift_env_64()
target/arm: Add 'static' and 'const' annotations to VSHLL function arrays
target/arm: Convert Neon 3-reg-diff polynomial VMULL
target/arm: Convert Neon 3-reg-diff saturating doubling multiplies
target/arm: Convert Neon 3-reg-diff long multiplies
target/arm: Convert Neon 3-reg-diff VABAL, VABDL to decodetree
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
# hw/arm/fsl-imx25.c
# hw/arm/fsl-imx6.c
# hw/arm/fsl-imx6ul.c
# hw/arm/fsl-imx7.c

show more ...

Merge remote-tracking branch 'remotes/armbru/tags/pull-qom-2020-06-15' into staging

QOM patches for 2020-06-15

# gpg: Signature made Mon 15 Jun 2020 21:07:19 BST
# gpg:

Merge remote-tracking branch 'remotes/armbru/tags/pull-qom-2020-06-15' into staging

QOM patches for 2020-06-15

# gpg: Signature made Mon 15 Jun 2020 21:07:19 BST
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-qom-2020-06-15: (84 commits)
MAINTAINERS: Make section QOM cover hw/core/*bus.c as well
qdev: qdev_init_nofail() is now unused, drop
qdev: Convert bus-less devices to qdev_realize() with Coccinelle
qdev: Use qdev_realize() in qdev_device_add()
qdev: Make qdev_realize() support bus-less devices
s390x/event-facility: Simplify creation of SCLP event devices
microbit: Eliminate two local variables in microbit_init()
sysbus: sysbus_init_child_obj() is now unused, drop
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 4
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 3
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 2
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 1
qdev: Drop qdev_realize() support for null bus
sysbus: Convert to sysbus_realize() etc. with Coccinelle
sysbus: New sysbus_realize(), sysbus_realize_and_unref()
sysbus: Tidy up sysbus_init_child_obj()'s @childsize arg, part 2
hw/arm/armsse: Pass correct child size to sysbus_init_child_obj()
sysbus: Tidy up sysbus_init_child_obj()'s @childsize arg, part 1
microbit: Tidy up sysbus_init_child_obj() @child argument
sysbus: Drop useless OBJECT() in sysbus_init_child_obj() calls
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

arm/aspeed: Rework NIC attachment

The number of MACs supported by an Aspeed SoC is defined by "macs_num"
under the SoC model, that is two for the AST2400 and AST2500 and four
for the

arm/aspeed: Rework NIC attachment

The number of MACs supported by an Aspeed SoC is defined by "macs_num"
under the SoC model, that is two for the AST2400 and AST2500 and four
for the AST2600. The model initializes the maximum number of supported
MACs but the number of realized devices is capped by the number of
network device back-ends defined on the command line. This can leave
unrealized devices hanging around in the QOM composition tree.

To get virtual hardware that matches the physical hardware, you have
to pass exactly as many -nic options as there are MACs, and some of
them must be -nic none:

* Machines ast2500-evb, palmetto-bmc, romulus-bmc, sonorapass-bmc,
swift-bmc, and witherspoon-bmc: two -nic, and the second one must be
-nic none.

* Machine ast2600-evb: four -nic, the first one must be -nic none.

* Machine tacoma-bmc: four nic, the first two and the last one must be
-nic none.

Modify the machine initialization to define which MACs are attached to
a network device back-end using a bit-field property "macs-mask" and
let the SoC realize all network devices.

The default setting of "macs-mask" is "use MAC0" only, which works for
all our AST2400 and AST2500 machines. The AST2600 machines have
different configurations. The AST2600 EVB machine activates MAC1, MAC2
and MAC3 and the Tacoma BMC machine activates MAC2.

Incompatible CLI change: -nic options now apply to *active* MACs:
MAC1, MAC2, MAC3 for ast2600-evb, MAC2 for tacoma-bmc, and MAC0 for
all the others.

The machines now always get all MACs as they should. Visible in "info
qom-tree", here's the change for tacoma-bmc:

/machine (tacoma-bmc-machine)
/peripheral (container)
/peripheral-anon (container)
/soc (ast2600-a1)
[...]
/ftgmac100[0] (ftgmac100)
/ftgmac100[0] (qemu:memory-region)
/ftgmac100[1] (ftgmac100)
+ /ftgmac100[0] (qemu:memory-region)
/ftgmac100[2] (ftgmac100)
+ /ftgmac100[0] (qemu:memory-region)
/ftgmac100[3] (ftgmac100)
+ /ftgmac100[0] (qemu:memory-region)
[...]
/mii[0] (aspeed-mmi)
/aspeed-mmi[0] (qemu:memory-region)
/mii[1] (aspeed-mmi)
+ /aspeed-mmi[0] (qemu:memory-region)
/mii[2] (aspeed-mmi)
+ /aspeed-mmi[0] (qemu:memory-region)
/mii[3] (aspeed-mmi)
+ /aspeed-mmi[0] (qemu:memory-region)

Also visible in "info qtree"; here's the change for tacoma-bmc:

dev: ftgmac100, id ""
gpio-out "sysbus-irq" 1
aspeed = true
- mac = "52:54:00:12:34:56"
- netdev = "hub0port0"
+ mac = "52:54:00:12:34:57"
+ netdev = ""
mmio 000000001e660000/0000000000002000
dev: ftgmac100, id ""
- aspeed = false
- mac = "00:00:00:00:00:00"
+ gpio-out "sysbus-irq" 1
+ aspeed = true
+ mac = "52:54:00:12:34:58"
netdev = ""
+ mmio 000000001e680000/0000000000002000
dev: ftgmac100, id ""
- aspeed = false
- mac = "00:00:00:00:00:00"
- netdev = ""
+ gpio-out "sysbus-irq" 1
+ aspeed = true
+ mac = "52:54:00:12:34:56"
+ netdev = "hub0port0"
+ mmio 000000001e670000/0000000000002000
dev: ftgmac100, id ""
- aspeed = false
- mac = "00:00:00:00:00:00"
+ gpio-out "sysbus-irq" 1
+ aspeed = true
+ mac = "52:54:00:12:34:59"
netdev = ""
+ mmio 000000001e690000/0000000000002000
[...]
dev: aspeed-mmi, id ""
mmio 000000001e650000/0000000000000008
dev: aspeed-mmi, id ""
+ mmio 000000001e650008/0000000000000008
dev: aspeed-mmi, id ""
+ mmio 000000001e650010/0000000000000008
dev: aspeed-mmi, id ""
+ mmio 000000001e650018/0000000000000008

Inactive MACs will have no peer and QEMU may warn the user with :

qemu-system-arm: warning: nic ftgmac100.0 has no peer
qemu-system-arm: warning: nic ftgmac100.1 has no peer
qemu-system-arm: warning: nic ftgmac100.3 has no peer

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
[Commit message expanded]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200609122339.937862-6-armbru@redhat.com>

show more ...

hw/arm/aspeed: add a 'execute-in-place' property to boot directly from CE0

The overhead for the OpenBMC firmware images using the a custom U-Boot
is around 2 seconds, which is fine, but

hw/arm/aspeed: add a 'execute-in-place' property to boot directly from CE0

The overhead for the OpenBMC firmware images using the a custom U-Boot
is around 2 seconds, which is fine, but with a U-Boot from mainline,
it takes an extra 50 seconds or so to reach Linux. A quick survey on
the number of reads performed on the flash memory region gives the
following figures :

OpenBMC U-Boot 922478 (~ 3.5 MBytes)
Mainline U-Boot 20569977 (~ 80 MBytes)

QEMU must be trashing the TCG TBs and reloading text very often. Some
addresses are read more than 250.000 times. Until we find a solution
to improve boot time, execution from MMIO is not activated by default.

Setting this option also breaks migration compatibility.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200114103433.30534-5-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/ehabkost/tags/x86-next-pull-request' into staging

x86 queue, 2019-12-16

Feature:
* Cooperlake CPU model

Cleanups:
* Use g_auto

Merge remote-tracking branch 'remotes/ehabkost/tags/x86-next-pull-request' into staging

x86 queue, 2019-12-16

Feature:
* Cooperlake CPU model

Cleanups:
* Use g_autofree in a few places

# gpg: Signature made Mon 16 Dec 2019 19:36:51 GMT
# gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg: issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/x86-next-pull-request:
i386: Use g_autofree in a few places
i386: Add new CPU model Cooperlake
i386: Add macro for stibp
i386: Add MSR feature bit for MDS-NO

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-dec-16-2019' into staging

MIPS queue for December 16th, 2019

# gpg: Signature made Mon 16 Dec 2019 12:29:24 GMT
#

Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-dec-16-2019' into staging

MIPS queue for December 16th, 2019

# gpg: Signature made Mon 16 Dec 2019 12:29:24 GMT
# gpg: using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [full]
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65

* remotes/amarkovic/tags/mips-queue-dec-16-2019:
MAINTAINERS: Add a file to MIPS section
MAINTAINERS: Add three files to Malta section
MAINTAINERS: Adjust maintainership for Malta board
MAINTAINERS: Adjust maintainership for Fulong 2E board
MAINTAINERS: Add a section on UI translation
hw/mips: Deprecate the r4k machine
mips: fulong 2e: Renovate coding style
mips: r4000: Renovate coding style
mips: mipssim: Renovate coding style
mips: malta: Renovate coding style
mips: jazz: Renovate coding style

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20191216-1' into staging

target-arm queue:
* Add support for Cortex-M7 CPU
* exynos4210_gic: Suppress gcc9 forma

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20191216-1' into staging

target-arm queue:
* Add support for Cortex-M7 CPU
* exynos4210_gic: Suppress gcc9 format-truncation warnings
* aspeed: Various minor bug fixes and improvements
* aspeed: Add support for the tacoma-bmc board
* Honour HCR_EL32.TID1 and .TID2 trapping requirements
* Handle trapping to EL2 of AArch32 VMRS instructions
* Handle AArch32 CP15 trapping via HSTR_EL2
* Add support for missing Jazelle system registers
* arm/arm-powerctl: set NSACR.{CP11, CP10} bits in arm_set_cpu_on
* Add support for DC CVAP & DC CVADP instructions
* Fix assertion when SCR.NS is changed in Secure-SVC &c
* enable SHPC native hot plug in arm ACPI

# gpg: Signature made Mon 16 Dec 2019 11:08:07 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20191216-1: (34 commits)
target/arm: ensure we use current exception state after SCR update
hw/arm/virt: Simplify by moving the gic in the machine state
hw/arm/acpi: enable SHPC native hot plug
hw/arm/acpi: simplify AML bit and/or statement
hw/arm/sbsa-ref: Simplify by moving the gic in the machine state
target/arm: Add support for DC CVAP & DC CVADP ins
migration: ram: Switch to ram block writeback
Memory: Enable writeback for given memory region
tcg: cputlb: Add probe_read
arm/arm-powerctl: set NSACR.{CP11, CP10} bits in arm_set_cpu_on()
target/arm: Add support for missing Jazelle system registers
target/arm: Handle AArch32 CP15 trapping via HSTR_EL2
target/arm: Handle trapping to EL2 of AArch32 VMRS instructions
target/arm: Honor HCR_EL2.TID1 trapping requirements
target/arm: Honor HCR_EL2.TID2 trapping requirements
aspeed: Change the "nic" property definition
aspeed: Change the "scu" property definition
gpio: fix memory leak in aspeed_gpio_init()
aspeed: Add support for the tacoma-bmc board
aspeed: Remove AspeedBoardConfig array and use AspeedMachineClass
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

aspeed: Remove AspeedBoardConfig array and use AspeedMachineClass

AspeedBoardConfig is a redundant way to define class attributes and it
complexifies the machine definition and initializ

aspeed: Remove AspeedBoardConfig array and use AspeedMachineClass

AspeedBoardConfig is a redundant way to define class attributes and it
complexifies the machine definition and initialization.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20191119141211.25716-14-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio: features, tests

libqos update with support for virtio 1.
Packed ring support for virtio.

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio: features, tests

libqos update with support for virtio 1.
Packed ring support for virtio.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Fri 25 Oct 2019 12:47:59 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream: (25 commits)
virtio: drop unused virtio_device_stop_ioeventfd() function
libqos: add VIRTIO PCI 1.0 support
libqos: extract Legacy virtio-pci.c code
libqos: make the virtio-pci BAR index configurable
libqos: expose common virtqueue setup/cleanup functions
libqos: add MSI-X callbacks to QVirtioPCIDevice
libqos: pass full QVirtQueue to set_queue_address()
libqos: add iteration support to qpci_find_capability()
libqos: access VIRTIO 1.0 vring in little-endian
libqos: implement VIRTIO 1.0 FEATURES_OK step
libqos: enforce Device Initialization order
libqos: add missing virtio-9p feature negotiation
tests/virtio-blk-test: set up virtqueue after feature negotiation
virtio-scsi-test: add missing feature negotiation
libqos: extend feature bits to 64-bit
libqos: read QVIRTIO_MMIO_VERSION register
tests/virtio-blk-test: read config space after feature negotiation
virtio: add property to enable packed virtqueue
vhost_net: enable packed ring support
virtio: event suppression support for packed ring
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge commit 'df84f17' into HEAD

This merge fixes a semantic conflict with the trivial tree.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging

Pull request

# gpg: Signature made Fri 25 Oct 2019 20:18:23 BST
# gpg: using

Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging

Pull request

# gpg: Signature made Fri 25 Oct 2019 20:18:23 BST
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/block-pull-request:
yield_until_fd_readable: make it work with any AioContect
virtio-blk: Add blk_drain() to virtio_blk_device_unrealize()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...