hw/usb: Silence compiler warnings in USB code when compiling with -Wshadow

Rename variables or remove nested definitions where it makes sense,
so that we can finally compile the USB code with "-Wsha

hw/usb: Silence compiler warnings in USB code when compiling with -Wshadow

Rename variables or remove nested definitions where it makes sense,
so that we can finally compile the USB code with "-Wshadow", too.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231004130822.113343-1-thuth@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

show more ...

hw: replace most qemu_bh_new calls with qemu_bh_new_guarded

This protects devices from bh->mmio reentrancy issues.

Thanks: Thomas Huth <thuth@redhat.com> for diagnosing OS X test failure.
Signed-of

hw: replace most qemu_bh_new calls with qemu_bh_new_guarded

This protects devices from bh->mmio reentrancy issues.

Thanks: Thomas Huth <thuth@redhat.com> for diagnosing OS X test failure.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230427211013.2994127-5-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>

show more ...

host-libusb: Remove unused variable

Variable unconnected used in usb_host_auto_check function is only incremented
but never read as line where it is read was disabled since introducing the code.
Thi

host-libusb: Remove unused variable

Variable unconnected used in usb_host_auto_check function is only incremented
but never read as line where it is read was disabled since introducing the code.
This causes 'Unused but set variable' warning on Clang 15.0.1 compiler.

Removing the variable and disabled code to prevent the warning.

Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <00df0db69ff9167d38bac81f6d03281955bd861a.1668009030.git.mrezanin@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

show more ...

modules: introduces module_kconfig directive

module_kconfig is a new directive that should be used with module_obj
whenever that module depends on the Kconfig to be enabled.

When the module is enab

modules: introduces module_kconfig directive

module_kconfig is a new directive that should be used with module_obj
whenever that module depends on the Kconfig to be enabled.

When the module is enabled in Kconfig we are sure that its dependencies
will be enabled as well, thus the module will be loaded without any
problem.

The correct way to use module_kconfig is by passing the Kconfig option
to module_kconfig (or the *config-devices.mak without CONFIG_).

Signed-off-by: Jose R. Ziviani <jziviani@suse.de>
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Message-Id: <165369002370.5857.12150544416563557322.stgit@work>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

Mark remaining global TypeInfo instances as const

More than 1k of TypeInfo instances are already marked as const. Mark the
remaining ones, too.

This commit was created with:
git grep -z -l 'stati

Mark remaining global TypeInfo instances as const

More than 1k of TypeInfo instances are already marked as const. Mark the
remaining ones, too.

This commit was created with:
git grep -z -l 'static TypeInfo' -- '*.c' | \
xargs -0 sed -i 's/static TypeInfo/static const TypeInfo/'

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Message-id: 20220117145805.173070-2-shentey@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/usb: Fix typo in comments and print

Fix typo:
*informations ==> information
*enougth ==> enough
*enouth ==> enough
*registy ==> registry
*releated ==> related
*Ouptut ==> Output
*manualy =

hw/usb: Fix typo in comments and print

Fix typo:
*informations ==> information
*enougth ==> enough
*enouth ==> enough
*registy ==> registry
*releated ==> related
*Ouptut ==> Output
*manualy ==> manually
*Attemping ==> Attempting
*contine ==> continue
*tranceiver ==> transceiver
*Tranceiver ==> Transceiver

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Message-Id: <20210730012720.2246-1-caihuoqing@baidu.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pc,pci: bugfixes

Small bugfixes all over the place.

Signed-off-by: Michael S. Tsirkin <mst@redhat.

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pc,pci: bugfixes

Small bugfixes all over the place.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Tue 03 Aug 2021 21:32:43 BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
Drop _DSM 5 from expected DSDTs on ARM
Revert "acpi/gpex: Inform os to keep firmware resource map"
arm/acpi: allow DSDT changes
acpi: x86: pcihp: add support hotplug on multifunction bridges
hw/pcie-root-port: Fix hotplug for PCI devices requiring IO

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/stefanha-gitlab/tags/block-pull-request' into staging

Pull request

The main fix here is for io_uring. Spurious -EAGAIN errors can happen and th

Merge remote-tracking branch 'remotes/stefanha-gitlab/tags/block-pull-request' into staging

Pull request

The main fix here is for io_uring. Spurious -EAGAIN errors can happen and the
request needs to be resubmitted.

The MAINTAINERS changes carry no risk and we might as well include them in QEMU
6.1.

# gpg: Signature made Thu 29 Jul 2021 17:22:20 BST
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha-gitlab/tags/block-pull-request:
MAINTAINERS: Added myself as a reviewer for the NVMe Block Driver
block/io_uring: resubmit when result is -EAGAIN
MAINTAINERS: add Stefano Garzarella as io_uring reviewer

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/kraxel/tags/usb-20210729-pull-request' into staging

usb: fixes for 6.1: usbredir, usb-host for windows, docs.

# gpg: Signature made Thu 29 Jul

Merge remote-tracking branch 'remotes/kraxel/tags/usb-20210729-pull-request' into staging

usb: fixes for 6.1: usbredir, usb-host for windows, docs.

# gpg: Signature made Thu 29 Jul 2021 13:50:32 BST
# gpg: using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/usb-20210729-pull-request:
docs: Fold usb2.txt passthrough information into usb.rst
docs: Fold usb2.txt physical port addressing info into usb.rst
docs: Fold usb2.txt USB controller information into usb.rst
docs: Incorporate information in usb-storage.txt into rST manual
usbredir: fix free call
ci: add libusb for windows builds
usb-host: wire up timer for windows

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

usb-host: wire up timer for windows

On windows we can't wait on file descriptors.
Poll libusb using a timer instead.

Fixes long-standing FIXME.

Resolves: https://gitlab

usb-host: wire up timer for windows

On windows we can't wait on file descriptors.
Poll libusb using a timer instead.

Fixes long-standing FIXME.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/431
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210623085249.1151901-2-kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/cohuck-gitlab/tags/s390x-20210708' into staging

s390x updates:
- add gen16 cpumodels
- refactor/cleanup some code
- bugfixes

# gpg:

Merge remote-tracking branch 'remotes/cohuck-gitlab/tags/s390x-20210708' into staging

s390x updates:
- add gen16 cpumodels
- refactor/cleanup some code
- bugfixes

# gpg: Signature made Thu 08 Jul 2021 12:26:21 BST
# gpg: using EDDSA key 69A3B536F5CBFC65208026C1DE88BB5641DE66C1
# gpg: issuer "cohuck@redhat.com"
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [unknown]
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cohuck@kernel.org>" [unknown]
# gpg: aka "Cornelia Huck <cohuck@redhat.com>" [unknown]
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
# Subkey fingerprint: 69A3 B536 F5CB FC65 2080 26C1 DE88 BB56 41DE 66C1

* remotes/cohuck-gitlab/tags/s390x-20210708:
target/s390x: split sysemu part of cpu models
target/s390x: move kvm files into kvm/
target/s390x: remove kvm-stub.c
target/s390x: use kvm_enabled() to wrap call to kvm_s390_get_hpage_1m
target/s390x: make helper.c sysemu-only
target/s390x: split cpu-dump from helper.c
target/s390x: move sysemu-only code out to cpu-sysemu.c
target/s390x: start moving TCG-only code to tcg/
target/s390x: rename internal.h to s390x-internal.h
target/s390x: remove tcg-stub.c
hw/s390x: only build tod-tcg from the CONFIG_TCG build
hw/s390x: tod: make explicit checks for accelerators when initializing
hw/s390x: rename tod-qemu.c to tod-tcg.c
target/s390x: meson: add target_user_arch
s390x/tcg: Fix m5 vs. m4 field for VECTOR MULTIPLY SUM LOGICAL
target/s390x: Fix CC set by CONVERT TO FIXED/LOGICAL
s390x/cpumodel: add 3931 and 3932

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/philmd/tags/mips-20210711' into staging

MIPS patches queue

- Rename Raven ASIC PCI bridge, add PCI_IO_BASE_ADDR definition
- Various Toshib

Merge remote-tracking branch 'remotes/philmd/tags/mips-20210711' into staging

MIPS patches queue

- Rename Raven ASIC PCI bridge, add PCI_IO_BASE_ADDR definition
- Various Toshiba TX79 opcodes implemented
- Rewrite UHI errno_mips() using switch statement
- Few fixes and improvements in the SONIC model (dp8393x)

# gpg: Signature made Sun 11 Jul 2021 22:12:49 BST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE

* remotes/philmd/tags/mips-20210711:
dp8393x: don't force 32-bit register access
dp8393x: Rewrite dp8393x_get() / dp8393x_put()
dp8393x: Store CAM registers as 16-bit
dp8393x: Replace 0x40 magic value by SONIC_REG_COUNT definition
dp8393x: Replace address_space_rw(is_write=1) by address_space_write()
dp8393x: fix CAM descriptor entry index
target/mips: Rewrite UHI errno_mips() using switch statement
target/mips/tx79: Introduce SQ opcode (Store Quadword)
target/mips/tx79: Introduce LQ opcode (Load Quadword)
target/mips/tx79: Introduce PROT3W opcode (Parallel Rotate 3 Words)
target/mips/tx79: Introduce PPACW opcode (Parallel Pack to Word)
target/mips/tx79: Introduce PCGT* (Parallel Compare for Greater Than)
target/mips/tx79: Introduce PCEQ* opcodes (Parallel Compare for Equal)
target/mips/tx79: Introduce PEXTL[BHW] opcodes (Parallel Extend Lower)
target/mips/tx79: Introduce PEXTUW (Parallel Extend Upper from Word)
target/mips/tx79: Introduce PSUB* opcodes (Parallel Subtract)
target/mips/tx79: Introduce PAND/POR/PXOR/PNOR opcodes (parallel logic)
hw/pci-host/raven: Add PCI_IO_BASE_ADDR definition
hw/pci-host: Rename Raven ASIC PCI bridge as raven.c

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20210710' into staging

Add translator_use_goto_tb.
Cleanups in prep of breakpoint fixes.
Misc fixes.

# gpg: Si

Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20210710' into staging

Add translator_use_goto_tb.
Cleanups in prep of breakpoint fixes.
Misc fixes.

# gpg: Signature made Sat 10 Jul 2021 16:29:14 BST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F

* remotes/rth-gitlab/tags/pull-tcg-20210710: (41 commits)
cpu: Add breakpoint tracepoints
tcg: Remove TCG_TARGET_HAS_goto_ptr
accel/tcg: Log tb->cflags with -d exec
accel/tcg: Split out log_cpu_exec
accel/tcg: Move tb_lookup to cpu-exec.c
accel/tcg: Move helper_lookup_tb_ptr to cpu-exec.c
target/i386: Use cpu_breakpoint_test in breakpoint_handler
tcg: Fix prologue disassembly
target/xtensa: Use translator_use_goto_tb
target/tricore: Use tcg_gen_lookup_and_goto_ptr
target/tricore: Use translator_use_goto_tb
target/sparc: Use translator_use_goto_tb
target/sh4: Use translator_use_goto_tb
target/s390x: Remove use_exit_tb
target/s390x: Use translator_use_goto_tb
target/rx: Use translator_use_goto_tb
target/riscv: Use translator_use_goto_tb
target/ppc: Use translator_use_goto_tb
target/openrisc: Use translator_use_goto_tb
target/nios2: Use translator_use_goto_tb
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* More SVM fixes (Lara)
* Module annotation database (Gerd)
* Memory leak fixes (myself)
* Bu

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* More SVM fixes (Lara)
* Module annotation database (Gerd)
* Memory leak fixes (myself)
* Build fixes (myself)
* --with-devices-* support (Alex)

# gpg: Signature made Fri 09 Jul 2021 17:23:52 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* remotes/bonzini-gitlab/tags/for-upstream: (48 commits)
meson: Use input/output for entitlements target
configure: allow the selection of alternate config in the build
configs: rename default-configs to configs and reorganise
hw/arm: move CONFIG_V7M out of default-devices
hw/arm: add dependency on OR_IRQ for XLNX_VERSAL
meson: Introduce target-specific Kconfig
meson: switch function tests from compilation to linking
vl: fix leak of qdict_crumple return value
target/i386: fix exceptions for MOV to DR
target/i386: Added DR6 and DR7 consistency checks
target/i386: Added MSRPM and IOPM size check
monitor/tcg: move tcg hmp commands to accel/tcg, register them dynamically
usb: build usb-host as module
monitor/usb: register 'info usbhost' dynamically
usb: drop usb_host_dev_is_scsi_storage hook
monitor: allow register hmp commands
accel: build tcg modular
accel: add tcg module annotations
accel: build qtest modular
accel: add qtest module annotations
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

usb: build usb-host as module

Drop one more shared library dependency (libusb) from core qemu.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jzi

usb: build usb-host as module

Drop one more shared library dependency (libusb) from core qemu.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-34-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

monitor/usb: register 'info usbhost' dynamically

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-

monitor/usb: register 'info usbhost' dynamically

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-33-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

usb: drop usb_host_dev_is_scsi_storage hook

Introduce an usb device flag instead, set it when usb-host looks at the
device descriptors anyway. Also set it for emulated storage devices,

usb: drop usb_host_dev_is_scsi_storage hook

Introduce an usb device flag instead, set it when usb-host looks at the
device descriptors anyway. Also set it for emulated storage devices,
for consistency. Add an inline helper function to check the flag.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-32-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/thuth-gitlab/tags/pull-request-2021-03-12' into staging

* Move unit and bench tests into separate directories
* Clean-up and improve gitlab-ci jobs

Merge remote-tracking branch 'remotes/thuth-gitlab/tags/pull-request-2021-03-12' into staging

* Move unit and bench tests into separate directories
* Clean-up and improve gitlab-ci jobs
* Drop the non-working "check-speed" makefile target
* Minor documentation updates

# gpg: Signature made Fri 12 Mar 2021 17:18:45 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5

* remotes/thuth-gitlab/tags/pull-request-2021-03-12:
README: Add Documentation blurb
MAINTAINERS: Merge the Gitlab-CI section into the generic CI section
tests: remove "make check-speed" in favor of "make bench"
gitlab-ci.yml: Merge check-crypto-old jobs into the build-crypto-old jobs
gitlab-ci.yml: Merge one of the coroutine jobs with the tcg-disabled job
gitlab-ci.yml: Add some missing dependencies to the jobs
gitlab-ci.yml: Move build-tools-and-docs-debian to a better place
tests: Move benchmarks into a separate folder
tests: Move unit tests into a separate directory

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/vivier/tags/m68k-for-6.0-pull-request' into staging

Prepare MacOS ROM support:
- add RTR instruction
- fix unaligned access requirement

Merge remote-tracking branch 'remotes/vivier/tags/m68k-for-6.0-pull-request' into staging

Prepare MacOS ROM support:
- add RTR instruction
- fix unaligned access requirement
- fix ATC bit (68040 MMU)

# gpg: Signature made Thu 11 Mar 2021 22:18:11 GMT
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C

* remotes/vivier/tags/m68k-for-6.0-pull-request:
target/m68k: add M68K_FEATURE_UNALIGNED_DATA feature
target/m68k: reformat m68k_features enum
target/m68k: don't set SSW ATC bit for physical bus errors
target/m68k: implement rtr instruction

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/kraxel/tags/ui-20210311-pull-request' into staging

ui: mostly cocoa fixes

# gpg: Signature made Thu 11 Mar 2021 12:33:51 GMT
# gpg:

Merge remote-tracking branch 'remotes/kraxel/tags/ui-20210311-pull-request' into staging

ui: mostly cocoa fixes

# gpg: Signature made Thu 11 Mar 2021 12:33:51 GMT
# gpg: using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/ui-20210311-pull-request:
ui/cocoa: Fix mouse association state
ui/cocoa: Mark variables static
ui/cocoa: Clear modifiers whenever possible
ui/cocoa: Do not rely on the first argument
ui/cocoa: Show QEMU icon in the about window
docs: Fix removal text of -show-cursor
ui/cocoa: Use kCGColorSpaceSRGB
ui/gtk: Remove NULL checks in gd_switch

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.0-20210310' into staging

ppc patch queue for 2021-03-10

Next batch of patches for the ppc target and machine types. I

Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.0-20210310' into staging

ppc patch queue for 2021-03-10

Next batch of patches for the ppc target and machine types. Includes:
* Several cleanups for sm501 from Peter Maydell
* An update to the SLOF guest firmware
* Improved handling of hotplug failures in spapr, associated cleanups
to the hotplug handling code
* Several etsec fixes and cleanups from Bin Meng
* Assorted other fixes and cleanups

# gpg: Signature made Wed 10 Mar 2021 04:08:53 GMT
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392

* remotes/dg-gitlab/tags/ppc-for-6.0-20210310:
spapr.c: send QAPI event when memory hotunplug fails
spapr.c: remove duplicated assert in spapr_memory_unplug_request()
target/ppc: fix icount support on Book-e vms accessing SPRs
qemu_timer.c: add timer_deadline_ms() helper
spapr_pci.c: add 'unplug already in progress' message for PCI unplug
spapr.c: add 'unplug already in progress' message for PHB unplug
hw/ppc: e500: Add missing <ranges> in the eTSEC node
hw/net: fsl_etsec: Fix build error when HEX_DUMP is on
spapr_drc.c: use DRC reconfiguration to cleanup DIMM unplug state
spapr_drc.c: add hotunplug timeout for CPUs
spapr_drc.c: introduce unplug_timeout_timer
target/ppc: Fix bcdsub. emulation when result overflows
docs/system: Extend PPC section
spapr: rename spapr_drc_detach() to spapr_drc_unplug_request()
spapr_drc.c: use spapr_drc_release() in isolate_physical/set_unusable
pseries: Update SLOF firmware image
spapr_drc.c: do not call spapr_drc_detach() in drc_isolate_logical()
hw/display/sm501: Inline template header into C file
hw/display/sm501: Expand out macros in template header
hw/display/sm501: Remove dead code for non-32-bit RGB surfaces

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-6.0-pull-request' into staging

Pull request

# gpg: Signature made Wed 10 Mar 2021 21:56:09 GMT
# gpg:

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-6.0-pull-request' into staging

Pull request

# gpg: Signature made Wed 10 Mar 2021 21:56:09 GMT
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-branch-for-6.0-pull-request: (22 commits)
sysemu: Let VMChangeStateHandler take boolean 'running' argument
sysemu/runstate: Let runstate_is_running() return bool
hw/lm32/Kconfig: Have MILKYMIST select LM32_DEVICES
hw/lm32/Kconfig: Rename CONFIG_LM32 -> CONFIG_LM32_DEVICES
hw/lm32/Kconfig: Introduce CONFIG_LM32_EVR for lm32-evr/uclinux boards
qemu-common.h: Update copyright string to 2021
tests/fp/fp-test: Replace the word 'blacklist'
qemu-options: Replace the word 'blacklist'
seccomp: Replace the word 'blacklist'
scripts/tracetool: Replace the word 'whitelist'
ui: Replace the word 'whitelist'
virtio-gpu: Adjust code space style
exec/memory: Use struct Object typedef
fuzz-test: remove unneccessary debugging flags
net: Use id_generate() in the network subsystem, too
MAINTAINERS: Fix the location of tools manuals
vhost_user_gpu: Drop dead check for g_malloc() failure
backends/dbus-vmstate: Fix short read error handling
target/hexagon/gen_tcg_funcs: Fix a typo
hw/elf_ops: Fix a typo
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

sysemu: Let VMChangeStateHandler take boolean 'running' argument

The 'running' argument from VMChangeStateHandler does not require
other value than 0 / 1. Make it a plain boolean.

sysemu: Let VMChangeStateHandler take boolean 'running' argument

The 'running' argument from VMChangeStateHandler does not require
other value than 0 / 1. Make it a plain boolean.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20210111152020.1422021-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

show more ...

Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2021-02-18' into staging

QAPI patches patches for 2021-02-18

# gpg: Signature made Thu 18 Feb 2021 18:51:35 GMT
# gpg

Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2021-02-18' into staging

QAPI patches patches for 2021-02-18

# gpg: Signature made Thu 18 Feb 2021 18:51:35 GMT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-qapi-2021-02-18:
qapi/introspect.py: set _gen_tree's default ifcond argument to ()
qapi/introspect.py: Type _gen_tree variants as Sequence[str]
qapi/introspect.py: Update copyright and authors list
qapi/introspect.py: Add docstrings to _gen_tree and _tree_to_qlit
qapi/introspect.py: add type hint annotations
qapi/introspect.py: remove _gen_variants helper
qapi/introspect.py: improve readability of _tree_to_qlit
qapi/introspect.py: improve _tree_to_qlit error message
qapi/introspect.py: create a typed 'Annotated' data strutcure
qapi/introspect.py: Introduce preliminary tree typing
qapi/introspect.py: Always define all 'extra' dict keys
qapi/introspect.py: replace 'extra' dict with 'comment' argument
qapi/introspect.py: Unify return type of _make_tree()
qapi/introspect.py: guard against ifcond/comment misuse
qapi/introspect.py: add _gen_features helper
qapi/introspect.py: use _make_tree for features nodes
qapi/introspect.py: assert schema is not None
qapi: Replace List[str] with Sequence[str] for ifcond

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-hex-20210218' into staging

Initial commit for the Qualcomm Hexagon processor.

# gpg: Signature made Thu 18 Feb 2021 16:26:

Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-hex-20210218' into staging

Initial commit for the Qualcomm Hexagon processor.

# gpg: Signature made Thu 18 Feb 2021 16:26:52 GMT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F

* remotes/rth-gitlab/tags/pull-hex-20210218: (35 commits)
Hexagon build infrastructure
Hexagon (tests/tcg/hexagon) TCG tests - floating point
Hexagon (tests/tcg/hexagon) TCG tests - atomics/load/store/misc
Hexagon (tests/tcg/hexagon) TCG tests - multiarch
Hexagon (linux-user/hexagon) Linux user emulation
Hexagon (target/hexagon) translation
Hexagon (target/hexagon) TCG for floating point instructions
Hexagon (target/hexagon) TCG for instructions with multiple definitions
Hexagon (target/hexagon) TCG generation
Hexagon (target/hexagon) instruction classes
Hexagon (target/hexagon) macros
Hexagon (target/hexagon) opcode data structures
Hexagon (target/hexagon) generater phase 4 - decode tree
Hexagon (target/hexagon) generator phase 3 - C preprocessor for decode tree
Hexagon (target/hexagon) generator phase 2 - generate header files
Hexagon (target/hexagon) generator phase 1 - C preprocessor for semantics
Hexagon (target/hexagon/imported) arch import
Hexagon (target/hexagon/fma_emu.[ch]) utility functions
Hexagon (target/hexagon/conv_emu.[ch]) utility functions
Hexagon (target/hexagon/arch.[ch]) utility functions
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...