hw: replace most qemu_bh_new calls with qemu_bh_new_guarded

This protects devices from bh->mmio reentrancy issues.

Thanks: Thomas Huth <thuth@redhat.com> for diagnosing OS X test failure.
Signed-of

hw: replace most qemu_bh_new calls with qemu_bh_new_guarded

This protects devices from bh->mmio reentrancy issues.

Thanks: Thomas Huth <thuth@redhat.com> for diagnosing OS X test failure.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230427211013.2994127-5-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>

show more ...

Replace use of qdev_reset_all() with device_cold_reset()

The legacy function qdev_reset_all() performs a recursive reset,
starting from a qdev. However, it does not permit any of the devices
in the

Replace use of qdev_reset_all() with device_cold_reset()

The legacy function qdev_reset_all() performs a recursive reset,
starting from a qdev. However, it does not permit any of the devices
in the tree to use three-phase reset, because device reset goes
through the device_legacy_reset() function that only calls the single
DeviceClass::reset method.

Switch to using the device_cold_reset() function instead. This also
performs a recursive reset, where first the children are reset and
then finally the parent, but it uses the new (...in 2020...)
Resettable mechanism, which supports both the old style single-reset
method and also the new 3-phase reset handling.

This commit changes the five remaining uses of this function.

Commit created with:
sed -i -e 's/qdev_reset_all/device_cold_reset/g' hw/i386/xen/xen_platform.c hw/input/adb.c hw/remote/vfio-user-obj.c hw/s390x/s390-virtio-ccw.c hw/usb/dev-uas.c

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

scsi: Add buf_len parameter to scsi_req_new()

When a SCSI command is received from the guest, the CDB length implied
by the first byte might exceed the number of bytes the guest sent. In
this case s

scsi: Add buf_len parameter to scsi_req_new()

When a SCSI command is received from the guest, the CDB length implied
by the first byte might exceed the number of bytes the guest sent. In
this case scsi_req_new() will read uninitialized data, causing
unpredictable behavior.

Adds the buf_len parameter to scsi_req_new() and plumbs it through the
call stack.

Signed-off-by: John Millikin <john@john-millikin.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1127
Message-Id: <20220817053458.698416-1-john@john-millikin.com>
[Fill in correct length for adapters other than ESP. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

uas: add missing return

Otherwise we run the error handling code even for successful requests.

Fixes: 13b250b12ad3 ("uas: add stream number sanity checks.")
Reported-by: Guenter Roeck <linux@roeck-

uas: add missing return

Otherwise we run the error handling code even for successful requests.

Fixes: 13b250b12ad3 ("uas: add stream number sanity checks.")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211210080659.2537084-1-kraxel@redhat.com>

show more ...

scsi: Replace scsi_bus_new() with scsi_bus_init(), scsi_bus_init_named()

The function scsi_bus_new() creates a new SCSI bus; callers can
either pass in a name argument to specify the name of the new

scsi: Replace scsi_bus_new() with scsi_bus_init(), scsi_bus_init_named()

The function scsi_bus_new() creates a new SCSI bus; callers can
either pass in a name argument to specify the name of the new bus, or
they can pass in NULL to allow the bus to be given an automatically
generated unique name. Almost all callers want to use the
autogenerated name; the only exception is the virtio-scsi device.

Taking a name argument that should almost always be NULL is an
easy-to-misuse API design -- it encourages callers to think perhaps
they should pass in some standard name like "scsi" or "scsi-bus". We
don't do this anywhere for SCSI, but we do (incorrectly) do it for
other bus types such as i2c.

The function name also implies that it will return a newly allocated
object, when it in fact does in-place allocation. We more commonly
name such functions foo_init(), with foo_new() being the
allocate-and-return variant.

Replace all the scsi_bus_new() callsites with either:
* scsi_bus_init() for the usual case where the caller wants
an autogenerated bus name
* scsi_bus_init_named() for the rare case where the caller
needs to specify the bus name

and document that for the _named() version it's then the caller's
responsibility to think about uniqueness of bus names.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20210923121153.23754-2-peter.maydell@linaro.org

show more ...

uas: add stream number sanity checks.

The device uses the guest-supplied stream number unchecked, which can
lead to guest-triggered out-of-band access to the UASDevice->data3 and
UASDevice->status3

uas: add stream number sanity checks.

The device uses the guest-supplied stream number unchecked, which can
lead to guest-triggered out-of-band access to the UASDevice->data3 and
UASDevice->status3 fields. Add the missing checks.

Fixes: CVE-2021-3713
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reported-by: Chen Zhe <chenzhe@huawei.com>
Reported-by: Tan Jingguo <tanjingguo@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210818120505.1258262-2-kraxel@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/cohuck-gitlab/tags/s390x-20210708' into staging

s390x updates:
- add gen16 cpumodels
- refactor/cleanup some code
- bugfixes

# gpg:

Merge remote-tracking branch 'remotes/cohuck-gitlab/tags/s390x-20210708' into staging

s390x updates:
- add gen16 cpumodels
- refactor/cleanup some code
- bugfixes

# gpg: Signature made Thu 08 Jul 2021 12:26:21 BST
# gpg: using EDDSA key 69A3B536F5CBFC65208026C1DE88BB5641DE66C1
# gpg: issuer "cohuck@redhat.com"
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [unknown]
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cohuck@kernel.org>" [unknown]
# gpg: aka "Cornelia Huck <cohuck@redhat.com>" [unknown]
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
# Subkey fingerprint: 69A3 B536 F5CB FC65 2080 26C1 DE88 BB56 41DE 66C1

* remotes/cohuck-gitlab/tags/s390x-20210708:
target/s390x: split sysemu part of cpu models
target/s390x: move kvm files into kvm/
target/s390x: remove kvm-stub.c
target/s390x: use kvm_enabled() to wrap call to kvm_s390_get_hpage_1m
target/s390x: make helper.c sysemu-only
target/s390x: split cpu-dump from helper.c
target/s390x: move sysemu-only code out to cpu-sysemu.c
target/s390x: start moving TCG-only code to tcg/
target/s390x: rename internal.h to s390x-internal.h
target/s390x: remove tcg-stub.c
hw/s390x: only build tod-tcg from the CONFIG_TCG build
hw/s390x: tod: make explicit checks for accelerators when initializing
hw/s390x: rename tod-qemu.c to tod-tcg.c
target/s390x: meson: add target_user_arch
s390x/tcg: Fix m5 vs. m4 field for VECTOR MULTIPLY SUM LOGICAL
target/s390x: Fix CC set by CONVERT TO FIXED/LOGICAL
s390x/cpumodel: add 3931 and 3932

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/philmd/tags/mips-20210711' into staging

MIPS patches queue

- Rename Raven ASIC PCI bridge, add PCI_IO_BASE_ADDR definition
- Various Toshib

Merge remote-tracking branch 'remotes/philmd/tags/mips-20210711' into staging

MIPS patches queue

- Rename Raven ASIC PCI bridge, add PCI_IO_BASE_ADDR definition
- Various Toshiba TX79 opcodes implemented
- Rewrite UHI errno_mips() using switch statement
- Few fixes and improvements in the SONIC model (dp8393x)

# gpg: Signature made Sun 11 Jul 2021 22:12:49 BST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE

* remotes/philmd/tags/mips-20210711:
dp8393x: don't force 32-bit register access
dp8393x: Rewrite dp8393x_get() / dp8393x_put()
dp8393x: Store CAM registers as 16-bit
dp8393x: Replace 0x40 magic value by SONIC_REG_COUNT definition
dp8393x: Replace address_space_rw(is_write=1) by address_space_write()
dp8393x: fix CAM descriptor entry index
target/mips: Rewrite UHI errno_mips() using switch statement
target/mips/tx79: Introduce SQ opcode (Store Quadword)
target/mips/tx79: Introduce LQ opcode (Load Quadword)
target/mips/tx79: Introduce PROT3W opcode (Parallel Rotate 3 Words)
target/mips/tx79: Introduce PPACW opcode (Parallel Pack to Word)
target/mips/tx79: Introduce PCGT* (Parallel Compare for Greater Than)
target/mips/tx79: Introduce PCEQ* opcodes (Parallel Compare for Equal)
target/mips/tx79: Introduce PEXTL[BHW] opcodes (Parallel Extend Lower)
target/mips/tx79: Introduce PEXTUW (Parallel Extend Upper from Word)
target/mips/tx79: Introduce PSUB* opcodes (Parallel Subtract)
target/mips/tx79: Introduce PAND/POR/PXOR/PNOR opcodes (parallel logic)
hw/pci-host/raven: Add PCI_IO_BASE_ADDR definition
hw/pci-host: Rename Raven ASIC PCI bridge as raven.c

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20210710' into staging

Add translator_use_goto_tb.
Cleanups in prep of breakpoint fixes.
Misc fixes.

# gpg: Si

Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20210710' into staging

Add translator_use_goto_tb.
Cleanups in prep of breakpoint fixes.
Misc fixes.

# gpg: Signature made Sat 10 Jul 2021 16:29:14 BST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F

* remotes/rth-gitlab/tags/pull-tcg-20210710: (41 commits)
cpu: Add breakpoint tracepoints
tcg: Remove TCG_TARGET_HAS_goto_ptr
accel/tcg: Log tb->cflags with -d exec
accel/tcg: Split out log_cpu_exec
accel/tcg: Move tb_lookup to cpu-exec.c
accel/tcg: Move helper_lookup_tb_ptr to cpu-exec.c
target/i386: Use cpu_breakpoint_test in breakpoint_handler
tcg: Fix prologue disassembly
target/xtensa: Use translator_use_goto_tb
target/tricore: Use tcg_gen_lookup_and_goto_ptr
target/tricore: Use translator_use_goto_tb
target/sparc: Use translator_use_goto_tb
target/sh4: Use translator_use_goto_tb
target/s390x: Remove use_exit_tb
target/s390x: Use translator_use_goto_tb
target/rx: Use translator_use_goto_tb
target/riscv: Use translator_use_goto_tb
target/ppc: Use translator_use_goto_tb
target/openrisc: Use translator_use_goto_tb
target/nios2: Use translator_use_goto_tb
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* More SVM fixes (Lara)
* Module annotation database (Gerd)
* Memory leak fixes (myself)
* Bu

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* More SVM fixes (Lara)
* Module annotation database (Gerd)
* Memory leak fixes (myself)
* Build fixes (myself)
* --with-devices-* support (Alex)

# gpg: Signature made Fri 09 Jul 2021 17:23:52 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* remotes/bonzini-gitlab/tags/for-upstream: (48 commits)
meson: Use input/output for entitlements target
configure: allow the selection of alternate config in the build
configs: rename default-configs to configs and reorganise
hw/arm: move CONFIG_V7M out of default-devices
hw/arm: add dependency on OR_IRQ for XLNX_VERSAL
meson: Introduce target-specific Kconfig
meson: switch function tests from compilation to linking
vl: fix leak of qdict_crumple return value
target/i386: fix exceptions for MOV to DR
target/i386: Added DR6 and DR7 consistency checks
target/i386: Added MSRPM and IOPM size check
monitor/tcg: move tcg hmp commands to accel/tcg, register them dynamically
usb: build usb-host as module
monitor/usb: register 'info usbhost' dynamically
usb: drop usb_host_dev_is_scsi_storage hook
monitor: allow register hmp commands
accel: build tcg modular
accel: add tcg module annotations
accel: build qtest modular
accel: add qtest module annotations
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

usb: drop usb_host_dev_is_scsi_storage hook

Introduce an usb device flag instead, set it when usb-host looks at the
device descriptors anyway. Also set it for emulated storage devices,

usb: drop usb_host_dev_is_scsi_storage hook

Introduce an usb device flag instead, set it when usb-host looks at the
device descriptors anyway. Also set it for emulated storage devices,
for consistency. Add an inline helper function to check the flag.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-32-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/kraxel/tags/ui-20210304-pull-request' into staging

ui/console: message surface tweaks.
ui/cocoa: bugfixes and cleanups.

# gpg: Signature ma

Merge remote-tracking branch 'remotes/kraxel/tags/ui-20210304-pull-request' into staging

ui/console: message surface tweaks.
ui/cocoa: bugfixes and cleanups.

# gpg: Signature made Thu 04 Mar 2021 08:36:53 GMT
# gpg: using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/ui-20210304-pull-request:
virtio-gpu: Do not distinguish the primary console
ui/console: Pass placeholder surface to displays
ui/console: Add placeholder flag to message surface
ui/cocoa: Replace fprintf with error_report
configure: Improve OpenGL dependency detections
ui/cocoa: Fix stride resolution of pixman image
ui/gtk: vte: fix sending multiple characeters
ui/cocoa: Remove the uses of full screen APIs

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pc,virtio,pci: bug fixes

Fixes all over the place. Specifically this fixes
a bug which made windows gue

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pc,virtio,pci: bug fixes

Fixes all over the place. Specifically this fixes
a bug which made windows guests lose device config
(such as the configured fixed IP) after upgrading
to the new QEMU.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Tue 02 Mar 2021 14:19:51 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
vhost: simplify vhost_dev_init() fail_busyloop label
hw/pci: Have safer pcie_bus_realize() by checking error path
virtio-net: handle zero mac for a vdpa peer
i386/acpi: restore device paths for pre-5.1 vms

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* fix --enable-fuzzing linker failures (Alexander)
* target/i386: Add bus lock debug exception suppor

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* fix --enable-fuzzing linker failures (Alexander)
* target/i386: Add bus lock debug exception support (Chenyi)
* update documentation for preferred boolean option syntax (Daniel)
* make SCSI io_timeout configurable (Hannes)
* fix handling of guest recoverable SCSI errors (myself)
* misc fixes (Pavel, Zheng Zhan Liang, Zihao)
* fix installation of binaries with entitlements (Akihiko)

# gpg: Signature made Thu 25 Feb 2021 14:41:56 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* remotes/bonzini-gitlab/tags/for-upstream: (29 commits)
tcg/i386: rdpmc: fix the the condtions
chardev: do not use short form boolean options in non-QemuOpts character device descriptions
vl: deprecate -writeconfig
target/i386: Add bus lock debug exception support
qom/object.c: Fix typo
target/i386: update to show preferred boolean syntax for -cpu
docs: update to show preferred boolean syntax for -cpu
docs: update to show preferred boolean syntax for -vnc
docs: update to show preferred boolean syntax for -chardev
qemu-options: update to show preferred boolean syntax for -vnc
qemu-options: update to show preferred boolean syntax for -incoming
qemu-options: update to show preferred boolean syntax for -netdev
qemu-options: update to show preferred boolean syntax for -spice
qemu-options: update to show preferred boolean syntax for -chardev
gdbstub: use preferred boolean option syntax
char: don't fail when client is not connected
scsi: drop 'result' argument from command_complete callback
scsi-disk: pass guest recoverable errors through even for rerror=stop
scsi-disk: pass SCSI status to scsi_handle_rw_error
scsi: introduce scsi_sense_from_errno()
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

scsi: drop 'result' argument from command_complete callback

The command complete callback has a SCSIRequest as the first argument,
and the status field of that structure is identical to

scsi: drop 'result' argument from command_complete callback

The command complete callback has a SCSIRequest as the first argument,
and the status field of that structure is identical to the 'status'
argument. So drop the argument from the callback.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Message-Id: <20201116184041.60465-3-hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/gkurz-gitlab/tags/9p-next-pull-request' into staging

This fixes a Coverity report and improves the fid reclaim logic.

# gpg: Signature made Mon

Merge remote-tracking branch 'remotes/gkurz-gitlab/tags/9p-next-pull-request' into staging

This fixes a Coverity report and improves the fid reclaim logic.

# gpg: Signature made Mon 25 Jan 2021 09:37:28 GMT
# gpg: using RSA key B4828BAF943140CEF2A3491071D4D5E5822F73D6
# gpg: Good signature from "Greg Kurz <groug@kaod.org>" [full]
# gpg: aka "Gregory Kurz <gregory.kurz@free.fr>" [full]
# gpg: aka "[jpeg image of size 3330]" [full]
# Primary key fingerprint: B482 8BAF 9431 40CE F2A3 4910 71D4 D5E5 822F 73D6

* remotes/gkurz-gitlab/tags/9p-next-pull-request:
9pfs: Convert reclaim list to QSLIST
9pfs: Improve unreclaim loop
9pfs: Convert V9fsFidState::fid_list to QSIMPLEQ
9pfs: Convert V9fsFidState::clunked to bool
9pfs/proxy: Check return value of proxy_marshal()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20210124' into staging

Fix tcg constant temp overflow.
Fix running during atomic single-step.
Partial support for apple

Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20210124' into staging

Fix tcg constant temp overflow.
Fix running during atomic single-step.
Partial support for apple silicon.
Cleanups for accel/tcg.

# gpg: Signature made Sun 24 Jan 2021 18:08:57 GMT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F

* remotes/rth-gitlab/tags/pull-tcg-20210124:
tcg: Restart code generation when we run out of temps
tcg: Toggle page execution for Apple Silicon
accel/tcg: Restrict cpu_io_recompile() from other accelerators
accel/tcg: Declare missing cpu_loop_exit*() stubs
accel/tcg: Restrict tb_gen_code() from other accelerators
accel/tcg: Move tb_flush_jmp_cache() to cputlb.c
accel/tcg: Make cpu_gen_init() static
tcg: Optimize inline dup_const for MO_64
qemu/compiler: Split out qemu_build_not_reached_always
tcg: update the cpu running flag in cpu_exec_step_atomic

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* Make MinGW respect --bindir (Joshua)
* Switch MinGW to a "deep" installation (Joshua + NSIS fixes b

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* Make MinGW respect --bindir (Joshua)
* Switch MinGW to a "deep" installation (Joshua + NSIS fixes by myself)
* Fix compilation errors/warnings (Qixin, Philippe)
* QemuOpts cleanups (myself)
* Consistency improvements for -action (myself)
* remove deprecated "change vnc TARGET" functionality (myself)
* meson cleanups (Marc-André, Philippe, myself)
* IDE out-of-bounds access (Prasad)
* LA57 fix for -cpu max (Weijiang)

# gpg: Signature made Sat 23 Jan 2021 20:55:59 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* remotes/bonzini-gitlab/tags/for-upstream: (30 commits)
qemu-option: warn for short-form boolean options
qemu-option: move help handling to get_opt_name_value
qemu-option: clean up id vs. list->merge_lists
vnc: support "-vnc help"
qmp: remove deprecated "change" command
hmp: remove "change vnc TARGET" command
acceptance: switch to QMP change-vnc-password command
meson.build: Detect bzip2 program
meson.build: Declare global edk2_targets / install_edk2_blobs variables
meson: Add a section header for library dependencies
meson: Display crypto-related information altogether
meson: Display block layer information altogether
meson: Display accelerators and selected targets altogether
meson: Summarize compilation-related information altogether
meson: Summarize overall features altogether
meson: Display host binaries information altogether
meson: Summarize information related to directories first
meson: convert wixl detection to Meson
nsis: adjust for new MinGW paths
meson: Declare have_virtfs_proxy_helper in main meson.build
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/usb/dev-uas: Report command additional adb length as unsupported

We are not ready to handle additional CDB data.

If a guest sends a packet with such additional data,
report t

hw/usb/dev-uas: Report command additional adb length as unsupported

We are not ready to handle additional CDB data.

If a guest sends a packet with such additional data,
report the command parameter as not supported.

Specify a size (of 1 byte) for the add_cdb member we
are not using, to fix the following warning:

usb/dev-uas.c:157:31: error: field 'status' with variable sized type 'uas_iu' not at the end of a struct or class is a GNU extension [-Werror,-Wgnu-variable-sized-type-not-at-end]
uas_iu status;
^

Reported-by: Ed Maste <emaste@FreeBSD.org>
Reported-by: Daniele Buono <dbuono@linux.vnet.ibm.com>
Reported-by: Han Han <hhan@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210120153522.1173897-4-philmd@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/ericb/tags/pull-bitmaps-2020-09-21' into staging

bitmaps patches for 2020-09-21

- Eric Blake: Improve 'qemu-img bitmap --merge' by not opening

Merge remote-tracking branch 'remotes/ericb/tags/pull-bitmaps-2020-09-21' into staging

bitmaps patches for 2020-09-21

- Eric Blake: Improve 'qemu-img bitmap --merge' by not opening backing images

# gpg: Signature made Tue 22 Sep 2020 01:58:31 BST
# gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg: aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A

* remotes/ericb/tags/pull-bitmaps-2020-09-21:
qemu-img: Support bitmap --merge into backing image

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/kraxel/tags/input-20200921-pull-request' into staging

input: tsc2xxx fix.

# gpg: Signature made Mon 21 Sep 2020 12:09:17 BST
# gpg:

Merge remote-tracking branch 'remotes/kraxel/tags/input-20200921-pull-request' into staging

input: tsc2xxx fix.

# gpg: Signature made Mon 21 Sep 2020 12:09:17 BST
# gpg: using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/input-20200921-pull-request:
hw/input/tsc2xxx: Reduce MouseTransformInfo structure exposure

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/kraxel/tags/usb-20200921-pull-request' into staging

usb: fix u2f build
usb: fix ohci oob access and loop issues

# gpg: Signature made Mon 2

Merge remote-tracking branch 'remotes/kraxel/tags/usb-20200921-pull-request' into staging

usb: fix u2f build
usb: fix ohci oob access and loop issues

# gpg: Signature made Mon 21 Sep 2020 09:58:06 BST
# gpg: using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/usb-20200921-pull-request:
hw: usb: hcd-ohci: check for processed TD before retire
hw: usb: hcd-ohci: check len and frame_number variables
usb: fix u2f build

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-5.2-pull-request' into staging

Pull request trivial patches 20200919

# gpg: Signature made Sat 19 Sep 2020 19:4

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-5.2-pull-request' into staging

Pull request trivial patches 20200919

# gpg: Signature made Sat 19 Sep 2020 19:43:35 BST
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-branch-for-5.2-pull-request:
contrib/: fix some comment spelling errors
qapi/: fix some comment spelling errors
disas/: fix some comment spelling errors
linux-user/: fix some comment spelling errors
util/: fix some comment spelling errors
scripts/: fix some comment spelling errors
docs/: fix some comment spelling errors
migration/: fix some comment spelling errors
qemu/: fix some comment spelling errors
scripts/git.orderfile: Display meson files along with buildsys ones
hw/timer/hpet: Fix debug format strings
hw/timer/hpet: Remove unused functions hpet_ram_readb, hpet_ram_readw
meson: remove empty else and duplicated gio deps
manual: escape backslashes in "parsed-literal" blocks
ui/spice-input: Remove superfluous forward declaration
hw/ppc/ppc4xx_pci: Replace magic value by the PCI_NUM_PINS definition
hw/gpio/max7310: Remove impossible check

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

QOM queue, 2020-09-18

Fixes:
* Error value corrections (Markus Armbruster)
* Corr

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

QOM queue, 2020-09-18

Fixes:
* Error value corrections (Markus Armbruster)
* Correct object_class_dynamic_cast_assert() documentation (Eduardo Habkost)
* Ensure objects using QEMU_ALIGNED are properly aligned (Richard Henderson)

QOM cleanups (Eduardo Habkost):
* Rename some constants
* Simplify parameters of OBJECT_DECLARE* macros
* Additional DECLARE_*CHECKER* usage
* Additional OBJECT_DECLARE_TYPE usage
* Additional OBJECT_DECLARE_SIMPLE_TYPE usage

# gpg: Signature made Fri 18 Sep 2020 21:45:29 BST
# gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg: issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/machine-next-pull-request:
Use OBJECT_DECLARE_SIMPLE_TYPE when possible
Use OBJECT_DECLARE_TYPE when possible
qom: Remove module_obj_name parameter from OBJECT_DECLARE* macros
qom: Remove ParentClassType argument from OBJECT_DECLARE_SIMPLE_TYPE
scripts/codeconverter: Update to latest version
target/s390x: Set instance_align on S390CPU TypeInfo
target/riscv: Set instance_align on RISCVCPU TypeInfo
target/ppc: Set instance_align on PowerPCCPU TypeInfo
target/arm: Set instance_align on CPUARM TypeInfo
qom: Allow objects to be allocated with increased alignment
qom: Correct error values in two contracts
qom: Clean up object_property_get_enum()'s error value
qom: Correct object_class_dynamic_cast_assert() documentation
sifive: Use DECLARE_*CHECKER* macros
sifive: Move QOM typedefs and add missing includes
sifive_u: Rename memmap enum constants
sifive_e: Rename memmap enum constants

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Use OBJECT_DECLARE_SIMPLE_TYPE when possible

This converts existing DECLARE_INSTANCE_CHECKER usage to
OBJECT_DECLARE_SIMPLE_TYPE when possible.

$ ./scripts/codeconverter/convert

Use OBJECT_DECLARE_SIMPLE_TYPE when possible

This converts existing DECLARE_INSTANCE_CHECKER usage to
OBJECT_DECLARE_SIMPLE_TYPE when possible.

$ ./scripts/codeconverter/converter.py -i \
--pattern=AddObjectDeclareSimpleType $(git grep -l '' -- '*.[ch]')

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Paul Durrant <paul@xen.org>
Message-Id: <20200916182519.415636-6-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

show more ...