tpm: Add support for TPM device over I2C bus

Qemu already supports devices attached to ISA and sysbus. This drop adds
support for the I2C bus attached TPM devices. I2C model only supports
TPM2 proto

tpm: Add support for TPM device over I2C bus

Qemu already supports devices attached to ISA and sysbus. This drop adds
support for the I2C bus attached TPM devices. I2C model only supports
TPM2 protocol.

This commit includes changes for the common code.
- Added I2C emulation model. Logic was added in the model to temporarily
cache the data as I2C interface works per byte basis.
- New tpm type "tpm-tis-i2c" added for I2C support. The user has to
provide this string on command line.

Testing:
TPM I2C device module is tested using SWTPM (software based TPM
package). Qemu uses the rainier machine and is connected to swtpm over
the socket interface.

The command to start swtpm is as follows:
$ swtpm socket --tpmstate dir=/tmp/mytpm1 \
--ctrl type=unixio,path=/tmp/mytpm1/swtpm-sock \
--tpm2 --log level=100

The command to start qemu is as follows:
$ qemu-system-arm -M rainier-bmc -nographic \
-kernel ${IMAGEPATH}/fitImage-linux.bin \
-dtb ${IMAGEPATH}/aspeed-bmc-ibm-rainier.dtb \
-initrd ${IMAGEPATH}/obmc-phosphor-initramfs.rootfs.cpio.xz \
-drive file=${IMAGEPATH}/obmc-phosphor-image.rootfs.wic.qcow2,if=sd,index=2 \
-net nic -net user,hostfwd=:127.0.0.1:2222-:22,hostfwd=:127.0.0.1:2443-:443 \
-chardev socket,id=chrtpm,path=/tmp/mytpm1/swtpm-sock \
-tpmdev emulator,id=tpm0,chardev=chrtpm \
-device tpm-tis-i2c,tpmdev=tpm0,bus=aspeed.i2c.bus.12,address=0x2e

Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Tested-by: Joel Stanley <joel@jms.id.au>
Message-id: 20230414220754.1191476-4-ninadpalsule@us.ibm.com

show more ...

tpm: Add support for TPM device over I2C bus

Qemu already supports devices attached to ISA and sysbus. This drop adds
support for the I2C bus attached TPM devices. I2C model only supports
TPM2 proto

tpm: Add support for TPM device over I2C bus

Qemu already supports devices attached to ISA and sysbus. This drop adds
support for the I2C bus attached TPM devices. I2C model only supports
TPM2 protocol.

This commit includes changes for the common code.
- Added I2C emulation model. Logic was added in the model to temporarily
cache the data as I2C interface works per byte basis.
- New tpm type "tpm-tis-i2c" added for I2C support. The user has to
provide this string on command line.

Testing:
TPM I2C device module is tested using SWTPM (software based TPM
package). Qemu uses the rainier machine and is connected to swtpm over
the socket interface.

The command to start swtpm is as follows:
$ swtpm socket --tpmstate dir=/tmp/mytpm1 \
--ctrl type=unixio,path=/tmp/mytpm1/swtpm-sock \
--tpm2 --log level=100

The command to start qemu is as follows:
$ qemu-system-arm -M rainier-bmc -nographic \
-kernel ${IMAGEPATH}/fitImage-linux.bin \
-dtb ${IMAGEPATH}/aspeed-bmc-ibm-rainier.dtb \
-initrd ${IMAGEPATH}/obmc-phosphor-initramfs.rootfs.cpio.xz \
-drive file=${IMAGEPATH}/obmc-phosphor-image.rootfs.wic.qcow2,if=sd,index=2 \
-net nic -net user,hostfwd=:127.0.0.1:2222-:22,hostfwd=:127.0.0.1:2443-:443 \
-chardev socket,id=chrtpm,path=/tmp/mytpm1/swtpm-sock \
-tpmdev emulator,id=tpm0,chardev=chrtpm \
-device tpm-tis-i2c,tpmdev=tpm0,bus=aspeed.i2c.bus.12,address=0x2e

Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Tested-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

show more ...

Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging

# gpg: Signature made Fri 04 Jun 2021 08:26:16 BST
# gpg: using RSA key EF04965B398D6211

Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging

# gpg: Signature made Fri 04 Jun 2021 08:26:16 BST
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211

* remotes/jasowang/tags/net-pull-request:
MAINTAINERS: Added eBPF maintainers information.
docs: Added eBPF documentation.
virtio-net: Added eBPF RSS to virtio-net.
ebpf: Added eBPF RSS loader.
ebpf: Added eBPF RSS program.
net: Added SetSteeringEBPF method for NetClientState.
net/tap: Added TUNSETSTEERINGEBPF code.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches

- NBD server: Fix crashes related to switching between AioContexts
- file-posix:

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches

- NBD server: Fix crashes related to switching between AioContexts
- file-posix: Workaround for discard/write_zeroes on buggy filesystems
- Follow-up fixes for the reopen vs. permission changes
- quorum: Fix error handling for flush
- block-copy: Refactor copy_range handling
- docs: Describe how to use 'null-co' block driver

# gpg: Signature made Wed 02 Jun 2021 14:44:15 BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream:
docs/secure-coding-practices: Describe how to use 'null-co' block driver
block-copy: refactor copy_range handling
block-copy: fix block_copy_task_entry() progress update
nbd/server: Use drained block ops to quiesce the server
block-backend: add drained_poll
block: improve permission conflict error message
block: simplify bdrv_child_user_desc()
block/vvfat: inherit child_vvfat_qcow from child_of_bds
block: improve bdrv_child_get_parent_desc()
block-backend: improve blk_root_get_parent_desc()
block: document child argument of bdrv_attach_child_common()
block/file-posix: Try other fallbacks after invalid FALLOC_FL_ZERO_RANGE
block/file-posix: Fix problem with fallocate(PUNCH_HOLE) on GPFS
block: drop BlockBackendRootState::read_only
block: drop BlockDriverState::read_only
block: consistently use bdrv_is_read_only()
block/vvfat: fix vvfat_child_perm crash
block/vvfat: child_vvfat_qcow: add .get_parent_aio_context, fix crash
qemu-io-cmds: assert that we don't have .perm requested in no-blk case
block/quorum: Provide .bdrv_co_flush instead of .bdrv_co_flush_to_disk

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/thuth-gitlab/tags/pull-request-2021-06-02' into staging

* Update the references to some doc files (use *.rst instead of *.txt)
* Bump minimum versio

Merge remote-tracking branch 'remotes/thuth-gitlab/tags/pull-request-2021-06-02' into staging

* Update the references to some doc files (use *.rst instead of *.txt)
* Bump minimum versions of some requirements after removing CentOS 7 support

# gpg: Signature made Wed 02 Jun 2021 08:12:18 BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5

* remotes/thuth-gitlab/tags/pull-request-2021-06-02:
configure: bump min required CLang to 6.0 / XCode 10.0
configure: bump min required GCC to 7.5.0
configure: bump min required glib version to 2.56
tests/docker: drop CentOS 7 container
tests/vm: convert centos VM recipe to CentOS 8
crypto: drop used conditional check
crypto: bump min gnutls to 3.5.18, dropping RHEL-7 support
crypto: bump min gcrypt to 1.8.0, dropping RHEL-7 support
crypto: drop back compatibility typedefs for nettle
crypto: bump min nettle to 3.4, dropping RHEL-7 support
patchew: move quick build job from CentOS 7 to CentOS 8 container
block/ssh: Bump minimum libssh version to 0.8.7
docs: fix references to docs/devel/s390-dasd-ipl.rst
docs: fix references to docs/specs/tpm.rst
docs: fix references to docs/devel/build-system.rst
docs: fix references to docs/devel/atomics.rst
docs: fix references to docs/devel/tracing.rst

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

docs: fix references to docs/devel/tracing.rst

Commit e50caf4a5c ("tracing: convert documentation to rST")
converted docs/devel/tracing.txt to docs/devel/tracing.rst.

We still h

docs: fix references to docs/devel/tracing.rst

Commit e50caf4a5c ("tracing: convert documentation to rST")
converted docs/devel/tracing.txt to docs/devel/tracing.rst.

We still have several references to the old file, so let's fix them
with the following command:

sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt)

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210517151702.109066-2-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2021-01-26' into staging

Block patches:
- Make backup block jobs use asynchronous requests with the block-copy
module

Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2021-01-26' into staging

Block patches:
- Make backup block jobs use asynchronous requests with the block-copy
module
- Use COR filter node for stream block jobs
- Make coroutine-sigaltstack’s qemu_coroutine_new() function thread-safe
- Report error string when file locking fails with an unexpected errno
- iotest fixes, additions, and some refactoring

# gpg: Signature made Tue 26 Jan 2021 14:16:59 GMT
# gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg: issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40

* remotes/maxreitz/tags/pull-block-2021-01-26: (53 commits)
iotests/178: Pass value to invalid option
iotests/118: Drop 'change' test
iotests: Add test for the regression fixed in c8bf9a9169
block: report errno when flock fcntl fails
simplebench: add bench-backup.py
simplebench: bench_block_job: add cmd_options argument
simplebench/bench_block_job: use correct shebang line with python3
block/block-copy: drop unused argument of block_copy()
block/block-copy: drop unused block_copy_set_progress_callback()
qapi: backup: disable copy_range by default
backup: move to block-copy
block/backup: drop extra gotos from backup_run()
block/block-copy: make progress_bytes_callback optional
iotests: 257: prepare for backup over block-copy
iotests: 219: prepare for backup over block-copy
iotests: 185: prepare for backup over block-copy
iotests/129: Limit backup's max-chunk/max-workers
iotests: 56: prepare for backup over block-copy
qapi: backup: add max-chunk and max-workers to x-perf struct
job: call job_enter from job_pause
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

tpm: tpm_spapr: Remove unused tracepoint

Linking of qemu-system-ppc64 fails on macOS with dtrace enabled:

error: probe tpm_spapr_show_buffer doesn't exist
error: Could not r

tpm: tpm_spapr: Remove unused tracepoint

Linking of qemu-system-ppc64 fails on macOS with dtrace enabled:

error: probe tpm_spapr_show_buffer doesn't exist
error: Could not register probes
ld: error creating dtrace DOF section for architecture x86_64

The failure is explained in 8c8ed03850208e4 ("net/colo: Match is-enabled
probe to tracepoint"). In short, is-enabled probe can't be used without
a matching trace probe. And for this particular case
tpm_util_show_buffer probe should be enabled to print TPM buffer.

Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>

show more ...

Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20200910' into staging

This PR includes multiple fixes and features for RISC-V:
- Fixes a bug in printing trap ca

Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20200910' into staging

This PR includes multiple fixes and features for RISC-V:
- Fixes a bug in printing trap causes
- Allows 16-bit writes to the SiFive test device. This fixes the
failure to reboot the RISC-V virt machine
- Support for the Microchip PolarFire SoC and Icicle Kit
- A reafactor of RISC-V code out of hw/riscv

# gpg: Signature made Thu 10 Sep 2020 19:08:06 BST
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054

* remotes/alistair/tags/pull-riscv-to-apply-20200910: (30 commits)
hw/riscv: Sort the Kconfig options in alphabetical order
hw/riscv: Drop CONFIG_SIFIVE
hw/riscv: Always build riscv_hart.c
hw/riscv: Move sifive_test model to hw/misc
hw/riscv: Move sifive_uart model to hw/char
hw/riscv: Move riscv_htif model to hw/char
hw/riscv: Move sifive_plic model to hw/intc
hw/riscv: Move sifive_clint model to hw/intc
hw/riscv: Move sifive_gpio model to hw/gpio
hw/riscv: Move sifive_u_otp model to hw/misc
hw/riscv: Move sifive_u_prci model to hw/misc
hw/riscv: Move sifive_e_prci model to hw/misc
hw/riscv: sifive_u: Connect a DMA controller
hw/riscv: clint: Avoid using hard-coded timebase frequency
hw/riscv: microchip_pfsoc: Hook GPIO controllers
hw/riscv: microchip_pfsoc: Connect 2 Cadence GEMs
hw/arm: xlnx: Set all boards' GEM 'phy-addr' property value to 23
hw/net: cadence_gem: Add a new 'phy-addr' property
hw/riscv: microchip_pfsoc: Connect a DMA controller
hw/dma: Add SiFive platform DMA controller emulation
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
# hw/riscv/trace-events

show more ...

Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-fixes-100920-1' into staging

Various misc and testing fixes:

- Expand CODING_STYLE.rst a little more
- usb-ho

Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-fixes-100920-1' into staging

Various misc and testing fixes:

- Expand CODING_STYLE.rst a little more
- usb-host build fix
- allow check-softfloat unit tests without TCG
- simplify mips imm_branch so compiler isn't confused
- mark ppc64abi32 for deprecation
- more compiler soothing in pch_rev_id
- allow acceptance to skip missing binaries
- more a bunch of plugins to contrib

# gpg: Signature made Thu 10 Sep 2020 10:51:05 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44

* remotes/stsquad/tags/pull-testing-fixes-100920-1:
plugins: move the more involved plugins to contrib
tests/acceptance: Add Test.fetch_asset(cancel_on_missing=True)
tests: bump avocado version
hw/i386: make explicit clearing of pch_rev_id
configure: don't enable ppc64abi32-linux-user by default
docs/system/deprecated: mark ppc64abi32-linux-user for deprecation
target/mips: simplify gen_compute_imm_branch logic
tests/meson.build: fp tests don't need CONFIG_TCG
usb-host: restrict workaround to new libusb versions
CODING_STYLE.rst: flesh out our naming conventions.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/berrange-gitlab/tags/crypt-perf-pull-request' into staging

Improve performance of crypto cipher subsystem

# gpg: Signature made Thu 10 Sep 2020

Merge remote-tracking branch 'remotes/berrange-gitlab/tags/crypt-perf-pull-request' into staging

Improve performance of crypto cipher subsystem

# gpg: Signature made Thu 10 Sep 2020 11:05:18 BST
# gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF

* remotes/berrange-gitlab/tags/crypt-perf-pull-request:
crypto/gcrypt: Split QCryptoCipherGcrypt into subclasses
crypto/nettle: Split QCryptoCipherNettle into subclasses
crypto/builtin: Split QCryptoCipherBuiltin into subclasses
crypto/builtin: Split and simplify AES_encrypt_cbc
crypto/builtin: Move AES_cbc_encrypt into cipher-builtin.inc.c
crypto/builtin: Merge qcrypto_cipher_aes_{ecb,xts}_{en,de}crypt
crypto/builtin: Remove odd-sized AES block handling
crypto: Constify cipher data tables
crypto: Move cipher->driver init to qcrypto_*_cipher_ctx_new
crypto: Allocate QCryptoCipher with the subclass
crypto: Use the correct const type for driver
crypto: Move QCryptoCipherDriver typedef to crypto/cipher.h
crypto/nettle: Fix xts_encrypt arguments
crypto: Remove redundant includes
crypto: Rename cipher include files to .c.inc
crypto: Assume blocksize is a power of 2
tests: fix output message formatting for crypto benchmarks

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-5.2-pull-request' into staging

trivial patches pull request 20200911

# gpg: Signature made Fri 11 Sep 2020 20:3

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-5.2-pull-request' into staging

trivial patches pull request 20200911

# gpg: Signature made Fri 11 Sep 2020 20:32:27 BST
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-branch-for-5.2-pull-request:
target/i386/kvm: Add missing fallthrough comment
util/hexdump: Reorder qemu_hexdump() arguments
util/hexdump: Convert to take a void pointer argument
hw/arm/pxa2xx: Add missing fallthrough comment
target/i386/kvm: Rename host_tsx_blacklisted() as host_tsx_broken()
test-vmstate: remove unnecessary code in match_interval_mapping_node
hw: hyperv: vmbus: Fix 32bit compilation
kconfig: fix comment referring to old Makefiles
meson.build: tweak sdl-image error message
hw/net/e1000e: Remove duplicated write handler for FLSWDATA register
hw/net/e1000e: Remove overwritten read handler for STATUS register
Makefile: Skip the meson subdir in cscope/TAGS/ctags
Makefile: Drop extra phony cscope
hw/gpio/max7310: Replace disabled printf() by qemu_log_mask(UNIMP)
hw/gpio/omap_gpio: Replace fprintf() by qemu_log_mask(GUEST_ERROR)
hw/acpi/tco: Remove unused definitions
hw/isa/isa-bus: Replace hw_error() by assert()
hw/mips/fuloong2e: Convert pointless error message to an assert()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
# net/colo-compare.c

show more ...

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

QOM boilerplate cleanup

Documentation build fix:
* memory: Remove kernel-doc comment

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

QOM boilerplate cleanup

Documentation build fix:
* memory: Remove kernel-doc comment marker (Eduardo Habkost)

QOM cleanups:
* Rename QOM macros for consistency between
TYPE_* and type checking constants (Eduardo Habkost)

QOM new macros:
* OBJECT_DECLARE_* and OBJECT_DEFINE_* macros (Daniel P. Berrangé)
* DECLARE_*_CHECKER macros (Eduardo Habkost)

Automated QOM boilerplate changes:
* Automated changes to use DECLARE_*_CHECKER (Eduardo Habkost
* Automated changes to use OBJECT_DECLARE* (Eduardo Habkost)

# gpg: Signature made Thu 10 Sep 2020 19:17:49 BST
# gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg: issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/machine-next-pull-request: (33 commits)
virtio-vga: Use typedef name for instance_size
vhost-user-vga: Use typedef name for instance_size
xilinx_axienet: Use typedef name for instance_size
lpc_ich9: Use typedef name for instance_size
omap_intc: Use typedef name for instance_size
xilinx_axidma: Use typedef name for instance_size
tusb6010: Rename TUSB to TUSB6010
pc87312: Rename TYPE_PC87312_SUPERIO to TYPE_PC87312
vfio: Rename PCI_VFIO to VFIO_PCI
usb: Rename USB_SERIAL_DEV to USB_SERIAL
sabre: Rename SABRE_DEVICE to SABRE
rs6000_mc: Rename RS6000MC_DEVICE to RS6000MC
filter-rewriter: Rename FILTER_COLO_REWRITER to FILTER_REWRITER
esp: Rename ESP_STATE to ESP
ahci: Rename ICH_AHCI to ICH9_AHCI
vmgenid: Rename VMGENID_DEVICE to TYPE_VMGENID
vfio: Rename VFIO_AP_DEVICE_TYPE to TYPE_VFIO_AP_DEVICE
dev-smartcard-reader: Rename CCID_DEV_NAME to TYPE_USB_CCID_DEV
ap-device: Rename AP_DEVICE_TYPE to TYPE_AP_DEVICE
gpex: Fix type checking function name
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- qemu-img create: Fail gracefully when backing file is an empty string
- Fixes

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- qemu-img create: Fail gracefully when backing file is an empty string
- Fixes related to filter block nodes ("Deal with filters" series)
- block/nvme: Various cleanups required to use multiple queues
- block/nvme: Use NvmeBar structure from "block/nvme.h"
- file-win32: Fix "locking" option
- iotests: Allow running from different directory

# gpg: Signature made Thu 10 Sep 2020 10:11:19 BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream: (65 commits)
block/qcow2-cluster: Add missing "fallthrough" annotation
block/nvme: Pair doorbell registers
block/nvme: Use generic NvmeBar structure
block/nvme: Group controller registers in NVMeRegs structure
file-win32: Fix "locking" option
iotests: Allow running from different directory
iotests: Test committing to overridden backing
iotests: Add test for commit in sub directory
iotests: Add filter mirror test cases
iotests: Add filter commit test cases
iotests: Let complete_and_wait() work with commit
iotests: Test that qcow2's data-file is flushed
block: Leave BDS.backing_{file,format} constant
block: Inline bdrv_co_block_status_from_*()
blockdev: Fix active commit choice
block: Drop backing_bs()
qemu-img: Use child access functions
nbd: Use CAF when looking for dirty bitmap
commit: Deal with filters
backup: Deal with filters
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

trace-events: Fix attribution of trace points to source

Some trace points are attributed to the wrong source file. Happens
when we neglect to update trace-events for code motion, or add

trace-events: Fix attribution of trace points to source

Some trace points are attributed to the wrong source file. Happens
when we neglect to update trace-events for code motion, or add events
in the wrong place, or misspell the file name.

Clean up with help of scripts/cleanup-trace-events.pl. Funnies
requiring manual post-processing:

* accel/tcg/cputlb.c trace points are in trace-events.

* block.c and blockdev.c trace points are in block/trace-events.

* hw/block/nvme.c uses the preprocessor to hide its trace point use
from cleanup-trace-events.pl.

* hw/tpm/tpm_spapr.c uses pseudo trace point tpm_spapr_show_buffer to
guard debug code.

* include/hw/xen/xen_common.h trace points are in hw/xen/trace-events.

* linux-user/trace-events abbreviates a tedious list of filenames to
*/signal.c.

* net/colo-compare and net/filter-rewriter.c use pseudo trace points
colo_compare_miscompare and colo_filter_rewriter_debug to guard
debug code.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200806141334.3646302-5-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2020-06-24' into staging

Block patches:
- Two iotest fixes

# gpg: Signature made Wed 24 Jun 2020 09:00:51 BST

Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2020-06-24' into staging

Block patches:
- Two iotest fixes

# gpg: Signature made Wed 24 Jun 2020 09:00:51 BST
# gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg: issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40

* remotes/maxreitz/tags/pull-block-2020-06-24:
iotests: don't test qcow2.py inside 291
iotests: Fix 051 output after qdev_init_nofail() removal

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging

Pull request

# gpg: Signature made Wed 24 Jun 2020 11:01:57 BST
# gpg: using

Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging

Pull request

# gpg: Signature made Wed 24 Jun 2020 11:01:57 BST
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/block-pull-request:
block/nvme: support nested aio_poll()
block/nvme: keep BDRVNVMeState pointer in NVMeQueuePair
block/nvme: clarify that free_req_queue is protected by q->lock
block/nvme: switch to a NVMeRequest freelist
block/nvme: don't access CQE after moving cq.head
block/nvme: drop tautologous assertion
block/nvme: poll queues without q->lock
check-block: enable iotests with SafeStack
configure: add flags to support SafeStack
coroutine: add check for SafeStack in sigaltstack
coroutine: support SafeStack in ucontext backend
minikconf: explicitly set encoding to UTF-8

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/xtensa/tags/20200625-xtensa' into staging

target/xtensa fixes for 5.1:

- fix access to special registers missing in the core configuration;

Merge remote-tracking branch 'remotes/xtensa/tags/20200625-xtensa' into staging

target/xtensa fixes for 5.1:

- fix access to special registers missing in the core configuration;
- fix simcall opcode behavior for new hardware;
- drop gen_io_end call from xtensa translator.

# gpg: Signature made Thu 25 Jun 2020 09:08:58 BST
# gpg: using RSA key 2B67854B98E5327DCDEB17D851F9CC91F83FA044
# gpg: issuer "jcmvbkbc@gmail.com"
# gpg: Good signature from "Max Filippov <filippov@cadence.com>" [unknown]
# gpg: aka "Max Filippov <max.filippov@cogentembedded.com>" [full]
# gpg: aka "Max Filippov <jcmvbkbc@gmail.com>" [full]
# Primary key fingerprint: 2B67 854B 98E5 327D CDEB 17D8 51F9 CC91 F83F A044

* remotes/xtensa/tags/20200625-xtensa:
target/xtensa: drop gen_io_end call
target/xtensa: fix simcall for newer hardware
target/xtensa: fetch HW version from configuration overlay
target/xtensa: work around missing SR definitions

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio,acpi,pci: fixes, cleanups.

Fixes, cleanups in ACPI, PCI, virtio.

Signed-off-by: Michael S.

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio,acpi,pci: fixes, cleanups.

Fixes, cleanups in ACPI, PCI, virtio.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Thu 25 Jun 2020 07:48:47 BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
Rename use_acpi_pci_hotplug to more appropriate use_acpi_hotplug_bridge
Stop vhost-user sending uninitialized mmap_offsets
docs/specs/tpm: ACPI boot now supported for TPM/ARM
arm/acpi: Add the TPM2.0 device under the DSDT
acpi: Some build_tpm2() code reshape
tests/acpi: update expected data files
acpi: q35: drop _SB.PCI0.ISA.LPCD opregion.
acpi: drop build_piix4_pm()
acpi: drop serial/parallel enable bits from dsdt
acpi: simplify build_isa_devices_aml()
acpi: factor out fw_cfg_add_acpi_dsdt()
acpi: move aml builder code for i8042 (kbd+mouse) device
floppy: move cmos_get_fd_drive_type() from pc
floppy: make isa_fdc_get_drive_max_chs static
acpi: move aml builder code for floppy device
acpi: bios-tables-test: show more context on asl diffs
qtest: allow DSDT acpi table changes

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging

Pull request

# gpg: Signature made Wed 24 Jun 2020 11:25:27 BST
# gpg: usin

Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging

Pull request

# gpg: Signature made Wed 24 Jun 2020 11:25:27 BST
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/tracing-pull-request:
trace/simple: Fix unauthorized enable
scripts/tracetool: Update maintainer email address

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/armbru/tags/pull-qdev-2020-06-23' into staging

Qdev patches for 2020-06-23

# gpg: Signature made Tue 23 Jun 2020 15:08:28 BST
# gpg:

Merge remote-tracking branch 'remotes/armbru/tags/pull-qdev-2020-06-23' into staging

Qdev patches for 2020-06-23

# gpg: Signature made Tue 23 Jun 2020 15:08:28 BST
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-qdev-2020-06-23:
sd/milkymist-memcard: Fix error API violation
sd/pxa2xx_mmci: Don't crash on pxa2xx_mmci_init() error
arm/aspeed: Drop aspeed_board_init_flashes() parameter @errp
qdev: Make qdev_prop_set_drive() match the other helpers
qdev: Reject chardev property override
qdev: Reject drive property override
qdev: Improve netdev property override error a bit
qdev: Eliminate get_pointer(), set_pointer()
blockdev: Deprecate -drive with bogus interface type
docs/qdev-device-use.txt: Update section "Default Devices"
fdc: Deprecate configuring floppies with -global isa-fdc
fdc: Open-code fdctrl_init_isa()
fdc: Reject clash between -drive if=floppy and -global isa-fdc
iotests/172: Cover -global floppy.drive=...
iotests/172: Cover empty filename and multiple use of drives
iotests/172: Include "info block" in test output

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/stefanberger/tags/pull-tpm-2020-06-23-1' into staging

Merge tpm 2020/06/23 v1

# gpg: Signature made Tue 23 Jun 2020 12:35:03 BST
# gpg:

Merge remote-tracking branch 'remotes/stefanberger/tags/pull-tpm-2020-06-23-1' into staging

Merge tpm 2020/06/23 v1

# gpg: Signature made Tue 23 Jun 2020 12:35:03 BST
# gpg: using RSA key B818B9CADF9089C2D5CEC66B75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211

* remotes/stefanberger/tags/pull-tpm-2020-06-23-1:
tpm: Move backend code under the 'backends/' directory
hw/tpm: Make 'tpm_util.h' publicly accessible as "sysemu/tpm_util.h"
hw/tpm: Move DEFINE_PROP_TPMBE() macro to 'tmp_prop.h' local header
hw/tpm: Move few declarations from 'tpm_util.h' to 'tpm_int.h'
hw/tpm: Make TRACE_TPM_UTIL_SHOW_BUFFER check local to tpm_util.c
hw/tpm: Remove unnecessary 'tpm_int.h' header inclusion
hw/tpm: Move 'hw/acpi/tpm.h' inclusion from header to sources
hw/tpm: Include missing 'qemu/option.h' header
hw/tpm: Do not include 'qemu/osdep.h' in header
hw/tpm: Rename TPMDEV as TPM_BACKEND in Kconfig
backends: Add TPM files into their own directory
docs/specs/tpm: Correct header path name

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

tpm: Move backend code under the 'backends/' directory

TPM subsytem is split into backends (see commit f4ede81eed2)
and frontends (see i.e. 3676bc69b35). Keep the emulated
hardware '

tpm: Move backend code under the 'backends/' directory

TPM subsytem is split into backends (see commit f4ede81eed2)
and frontends (see i.e. 3676bc69b35). Keep the emulated
hardware 'frontends' under hw/tpm/, but move the backends
in the backends/tpm/ directory.

Suggested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200612085444.8362-13-philmd@redhat.com
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>

show more ...

Merge remote-tracking branch 'remotes/kraxel/tags/audio-20200207-pull-request' into staging

audio: bugfixes, mostly audio backend rewrite fallout

# gpg: Signature made Fri 07 Feb 20

Merge remote-tracking branch 'remotes/kraxel/tags/audio-20200207-pull-request' into staging

audio: bugfixes, mostly audio backend rewrite fallout

# gpg: Signature made Fri 07 Feb 2020 07:45:44 GMT
# gpg: using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/audio-20200207-pull-request:
audio: proper support for float samples in mixeng
coreaudio: fix coreaudio playback
audio/dsound: fix invalid parameters error
audio: audio_generic_get_buffer_in should honor *size
ossaudio: disable poll mode can't be reached
ossaudio: prevent SIGSEGV in oss_enable_out
audio: fix bug 1858488
audio: prevent SIGSEGV in AUD_get_buffer_size_out
paaudio: remove unused variables
audio: fix audio_generic_read
audio: fix audio_generic_write
audio/oss: fix buffer pos calculation

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

tpm_spapr: Support suspend and resume

Extend the tpm_spapr frontend with VM suspend and resume support.

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Message-Id: <20

tpm_spapr: Support suspend and resume

Extend the tpm_spapr frontend with VM suspend and resume support.

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Message-Id: <20200121152935.649898-5-stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...