tpm: Add support for TPM device over I2C bus

Qemu already supports devices attached to ISA and sysbus. This drop adds
support for the I2C bus attached TPM devices. I2C model only supports
TPM2 proto

tpm: Add support for TPM device over I2C bus

Qemu already supports devices attached to ISA and sysbus. This drop adds
support for the I2C bus attached TPM devices. I2C model only supports
TPM2 protocol.

This commit includes changes for the common code.
- Added I2C emulation model. Logic was added in the model to temporarily
cache the data as I2C interface works per byte basis.
- New tpm type "tpm-tis-i2c" added for I2C support. The user has to
provide this string on command line.

Testing:
TPM I2C device module is tested using SWTPM (software based TPM
package). Qemu uses the rainier machine and is connected to swtpm over
the socket interface.

The command to start swtpm is as follows:
$ swtpm socket --tpmstate dir=/tmp/mytpm1 \
--ctrl type=unixio,path=/tmp/mytpm1/swtpm-sock \
--tpm2 --log level=100

The command to start qemu is as follows:
$ qemu-system-arm -M rainier-bmc -nographic \
-kernel ${IMAGEPATH}/fitImage-linux.bin \
-dtb ${IMAGEPATH}/aspeed-bmc-ibm-rainier.dtb \
-initrd ${IMAGEPATH}/obmc-phosphor-initramfs.rootfs.cpio.xz \
-drive file=${IMAGEPATH}/obmc-phosphor-image.rootfs.wic.qcow2,if=sd,index=2 \
-net nic -net user,hostfwd=:127.0.0.1:2222-:22,hostfwd=:127.0.0.1:2443-:443 \
-chardev socket,id=chrtpm,path=/tmp/mytpm1/swtpm-sock \
-tpmdev emulator,id=tpm0,chardev=chrtpm \
-device tpm-tis-i2c,tpmdev=tpm0,bus=aspeed.i2c.bus.12,address=0x2e

Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Tested-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

show more ...

Merge tag 'pull-tpm-2023-04-20-1' of https://github.com/stefanberger/qemu-tpm into staging

Merge tpm 2023/04/20 v1

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEuBi5yt+QicLVzsZrda1lgCoLQhEFAm

Merge tag 'pull-tpm-2023-04-20-1' of https://github.com/stefanberger/qemu-tpm into staging

Merge tpm 2023/04/20 v1

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEuBi5yt+QicLVzsZrda1lgCoLQhEFAmRBLgoACgkQda1lgCoL
# QhEPyQf/WfEg8k2hDLExobsSgup1IsnT+mHHTBOZVJvq2efg2YXUTHA56fmD9X6d
# crqTq68L5oaMES5iYEZhA7EAgfk3RvxDQGrlXBByPzrc6SSwEHHMR4Zzi5zrbCoW
# t6TmaKQrlQqYwkhhsbyqnG46bj0ugCDagkBLfJdVl96fjkYgTspcDxaNwqwy/DPn
# GTmQlvdRY09D1nylIdtcLBIfsM+sIkRslyngbUEIy+Bx8EWRy2a8Qw0BdY9g1XoE
# e0CaRaFMpju1KOIjq0YSIzt0LSQDFfPc1IlUAC0ZALhNmp+PPNtr4E7+4kFfO2ym
# 1sT2w25ho8dYDdm/m8tIauCdGoHw4A==
# =ML27
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 20 Apr 2023 01:20:26 PM BST
# gpg: using RSA key B818B9CADF9089C2D5CEC66B75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211

* tag 'pull-tpm-2023-04-20-1' of https://github.com/stefanberger/qemu-tpm:
qtest: Add a test case for TPM TIS I2C connected to Aspeed I2C controller
qtest: Move tpm_util_tis_transmit() into tpm-tis-utils.c and rename it
qtest: Add functions for accessing devices on Aspeed I2C controller
tests/avocado/aspeed: Add TPM TIS I2C test
tpm: Add support for TPM device over I2C bus
tpm: Extend common APIs to support TPM TIS I2C
docs: Add support for TPM devices over I2C bus

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

tpm: Add support for TPM device over I2C bus

Qemu already supports devices attached to ISA and sysbus. This drop adds
support for the I2C bus attached TPM devices. I2C model only supports
TPM2 proto

tpm: Add support for TPM device over I2C bus

Qemu already supports devices attached to ISA and sysbus. This drop adds
support for the I2C bus attached TPM devices. I2C model only supports
TPM2 protocol.

This commit includes changes for the common code.
- Added I2C emulation model. Logic was added in the model to temporarily
cache the data as I2C interface works per byte basis.
- New tpm type "tpm-tis-i2c" added for I2C support. The user has to
provide this string on command line.

Testing:
TPM I2C device module is tested using SWTPM (software based TPM
package). Qemu uses the rainier machine and is connected to swtpm over
the socket interface.

The command to start swtpm is as follows:
$ swtpm socket --tpmstate dir=/tmp/mytpm1 \
--ctrl type=unixio,path=/tmp/mytpm1/swtpm-sock \
--tpm2 --log level=100

The command to start qemu is as follows:
$ qemu-system-arm -M rainier-bmc -nographic \
-kernel ${IMAGEPATH}/fitImage-linux.bin \
-dtb ${IMAGEPATH}/aspeed-bmc-ibm-rainier.dtb \
-initrd ${IMAGEPATH}/obmc-phosphor-initramfs.rootfs.cpio.xz \
-drive file=${IMAGEPATH}/obmc-phosphor-image.rootfs.wic.qcow2,if=sd,index=2 \
-net nic -net user,hostfwd=:127.0.0.1:2222-:22,hostfwd=:127.0.0.1:2443-:443 \
-chardev socket,id=chrtpm,path=/tmp/mytpm1/swtpm-sock \
-tpmdev emulator,id=tpm0,chardev=chrtpm \
-device tpm-tis-i2c,tpmdev=tpm0,bus=aspeed.i2c.bus.12,address=0x2e

Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Tested-by: Joel Stanley <joel@jms.id.au>
Message-id: 20230414220754.1191476-4-ninadpalsule@us.ibm.com

show more ...

Merge remote-tracking branch 'remotes/stefanberger/tags/pull-tpm-2020-06-23-1' into staging

Merge tpm 2020/06/23 v1

# gpg: Signature made Tue 23 Jun 2020 12:35:03 BST
# gpg: using RS

Merge remote-tracking branch 'remotes/stefanberger/tags/pull-tpm-2020-06-23-1' into staging

Merge tpm 2020/06/23 v1

# gpg: Signature made Tue 23 Jun 2020 12:35:03 BST
# gpg: using RSA key B818B9CADF9089C2D5CEC66B75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211

* remotes/stefanberger/tags/pull-tpm-2020-06-23-1:
tpm: Move backend code under the 'backends/' directory
hw/tpm: Make 'tpm_util.h' publicly accessible as "sysemu/tpm_util.h"
hw/tpm: Move DEFINE_PROP_TPMBE() macro to 'tmp_prop.h' local header
hw/tpm: Move few declarations from 'tpm_util.h' to 'tpm_int.h'
hw/tpm: Make TRACE_TPM_UTIL_SHOW_BUFFER check local to tpm_util.c
hw/tpm: Remove unnecessary 'tpm_int.h' header inclusion
hw/tpm: Move 'hw/acpi/tpm.h' inclusion from header to sources
hw/tpm: Include missing 'qemu/option.h' header
hw/tpm: Do not include 'qemu/osdep.h' in header
hw/tpm: Rename TPMDEV as TPM_BACKEND in Kconfig
backends: Add TPM files into their own directory
docs/specs/tpm: Correct header path name

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

tpm: Move backend code under the 'backends/' directory

TPM subsytem is split into backends (see commit f4ede81eed2)
and frontends (see i.e. 3676bc69b35). Keep the emulated
hardware 'frontends' under

tpm: Move backend code under the 'backends/' directory

TPM subsytem is split into backends (see commit f4ede81eed2)
and frontends (see i.e. 3676bc69b35). Keep the emulated
hardware 'frontends' under hw/tpm/, but move the backends
in the backends/tpm/ directory.

Suggested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200612085444.8362-13-philmd@redhat.com
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>

show more ...

hw/tpm: Rename TPMDEV as TPM_BACKEND in Kconfig

The TPMDEV describe TPM backends. Use the TPM_BACKEND config
name which is self-explicit.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
R

hw/tpm: Rename TPMDEV as TPM_BACKEND in Kconfig

The TPMDEV describe TPM backends. Use the TPM_BACKEND config
name which is self-explicit.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20200612085444.8362-4-philmd@redhat.com
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>

show more ...

Merge remote-tracking branch 'remotes/stefanberger/tags/pull-tpm-2020-03-04-2' into staging

Merge tpm 2020/03/04 v2

# gpg: Signature made Thu 05 Mar 2020 17:21:05 GMT
# gpg: using RS

Merge remote-tracking branch 'remotes/stefanberger/tags/pull-tpm-2020-03-04-2' into staging

Merge tpm 2020/03/04 v2

# gpg: Signature made Thu 05 Mar 2020 17:21:05 GMT
# gpg: using RSA key B818B9CADF9089C2D5CEC66B75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211

* remotes/stefanberger/tags/pull-tpm-2020-03-04-2:
test: tpm-tis: Add Sysbus TPM-TIS device test
test: tpm-tis: Get prepared to share tests between ISA and sysbus devices
test: tpm: pass optional machine options to swtpm test functions
docs/specs/tpm: Document TPM_TIS sysbus device for ARM
hw/arm/virt: vTPM support
tpm: Add the SysBus TPM TIS device
tpm: Separate TPM_TIS and TPM_TIS_ISA configs
tpm: Separate tpm_tis common functions from isa code
tpm: Use TPMState as a common struct
tpm: rename TPM_TIS into TPM_TIS_ISA

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

tpm: Add the SysBus TPM TIS device

Introduce the tpm-tis-device which is a sysbus device
and is bound to be used on ARM.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Berger

tpm: Add the SysBus TPM TIS device

Introduce the tpm-tis-device which is a sysbus device
and is bound to be used on ARM.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Message-id: 20200305165149.618-6-eric.auger@redhat.com
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>

show more ...

tpm: Separate TPM_TIS and TPM_TIS_ISA configs

Let's separate the compilation of tpm_tis_common.c from
the compilation of tpm_tis_isa.c

The common part will be also compiled along with the
tpm_tis_s

tpm: Separate TPM_TIS and TPM_TIS_ISA configs

Let's separate the compilation of tpm_tis_common.c from
the compilation of tpm_tis_isa.c

The common part will be also compiled along with the
tpm_tis_sysbus device.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Message-id: 20200305165149.618-5-eric.auger@redhat.com
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>

show more ...

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.0-20200203' into staging

ppc patch queue 2020-02093

This pull request supersedes ppc-for-5.0-20200131. The only changes
are one extra p

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.0-20200203' into staging

ppc patch queue 2020-02093

This pull request supersedes ppc-for-5.0-20200131. The only changes
are one extra patch to suppress some irritating warnings during tests
under TCG, and an extra Tested-by in one of the other patches.

Here's the next batch of patches for ppc and associated machine types.
Highlights includes:
* Remove the deprecated "prep" machine type and its OpenHackware
firmware
* Add TCG emulation of the msgsndp etc. supervisor privileged
doorbell instructions
* Allow "pnv" machine type to run Hostboot style firmwares
* Add a virtual TPM device for spapr machines
* Implement devices for POWER8 PHB3 and POWER9 PHB4 host bridges for
the pnv machine type
* Use faster Spectre mitigation by default for POWER9 DD2.3 machines
* Introduce Firmware Assisted NMI dump facility for spapr machines
* Fix a performance regression with load/store multiple instructions
in TCG

as well as some other assorted cleanups and fixes.

# gpg: Signature made Mon 03 Feb 2020 03:30:24 GMT
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-5.0-20200203: (35 commits)
tests: Silence various warnings with pseries
target/ppc: Use probe_write for DCBZ
target/ppc: Remove redundant mask in DCBZ
target/ppc: Use probe_access for LMW, STMW
target/ppc: Use probe_access for LSW, STSW
ppc: spapr: Activate the FWNMI functionality
migration: Include migration support for machine check handling
ppc: spapr: Handle "ibm,nmi-register" and "ibm,nmi-interlock" RTAS calls
target/ppc: Build rtas error log upon an MCE
target/ppc: Handle NMI guest exit
ppc: spapr: Introduce FWNMI capability
Wrapper function to wait on condition for the main loop mutex
target/ppc/cpu.h: Put macro parameter in parentheses
spapr: Enable DD2.3 accelerated count cache flush in pseries-5.0 machine
ppc/pnv: change the PowerNV machine devices to be non user creatable
ppc/pnv: Add models for POWER8 PHB3 PCIe Host bridge
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge
docs/specs/tpm: reST-ify TPM documentation
hw/ppc/Kconfig: Enable TPM_SPAPR as part of PSERIES config
tpm_spapr: Support suspend and resume
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/ppc/Kconfig: Enable TPM_SPAPR as part of PSERIES config

Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: David Gibson

hw/ppc/Kconfig: Enable TPM_SPAPR as part of PSERIES config

Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20200121152935.649898-6-stefanb@linux.ibm.com>
[dwg: Use default in Kconfig rather than select to avoid breaking
Windows host build]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

tpm_spapr: Support TPM for ppc64 using CRQ based interface

Implement support for TPM on ppc64 by implementing the vTPM CRQ interface
as a frontend. It can use the tpm_emulator driver backend with th

tpm_spapr: Support TPM for ppc64 using CRQ based interface

Implement support for TPM on ppc64 by implementing the vTPM CRQ interface
as a frontend. It can use the tpm_emulator driver backend with the external
swtpm.

The Linux vTPM driver for ppc64 works with this emulation.

This TPM emulator also handles the TPM 2 case.

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20200121152935.649898-4-stefanb@linux.ibm.com>
[dwg: Use device_class_set_props(), tweak Kconfig]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream-kconfig' into staging

Initial Kconfig work, excluding ARM and MIPS

# gpg: Signature made Thu 07 Mar 2019 20:54:27 GMT
# gpg:

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream-kconfig' into staging

Initial Kconfig work, excluding ARM and MIPS

# gpg: Signature made Thu 07 Mar 2019 20:54:27 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream-kconfig: (54 commits)
kconfig: add documentation
.travis.yml: test that no-default-device builds do not regress
xtensa-softmmu.mak: express dependencies with Kconfig
unicore32-softmmu.mak: express dependencies with Kconfig
sparc64-softmmu.mak: express dependencies with Kconfig
sparc-softmmu.mak: express dependencies with Kconfig
sh4-softmmu.mak: express dependencies with Kconfig
s390x: express dependencies with Kconfig
riscv-softmmu.mak: replace CONFIG_* with Kconfig "select" directives
or1k-softmmu.mak: express dependencies with Kconfig
nios2-softmmu.mak: express dependencies with Kconfig
moxie-softmmu.mak: express dependencies with Kconfig
microblaze-softmmu.mak: express dependencies with Kconfig
m68k-softmmu.mak: express dependencies with Kconfig
lm32-softmmu.mak: express dependencies with Kconfig
hppa-softmmu.mak: express dependencies with Kconfig
cris-softmmu.mak: express dependencies with Kconfig
alpha-softmmu.mak: express dependencies with Kconfig
ppc: Express dependencies of the embedded machines with kconfig
ppc: Express dependencies of the Sam460EX machines with kconfig
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

tpm: express dependencies with Kconfig

This automatically removes the TPM backends from the
binary altogether if no front-ends are selected.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

i386: express dependencies with Kconfig

This way, the default-configs file only need to specify the boards
and any optional devices.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by

i386: express dependencies with Kconfig

This way, the default-configs file only need to specify the boards
and any optional devices.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20190123065618.3520-37-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

isa: express dependencies with kconfig

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20190123065618.3520-36-yang.zhong@intel.com>
R

isa: express dependencies with kconfig

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20190123065618.3520-36-yang.zhong@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

build: switch to Kconfig

The make_device_config.sh script is replaced by minikconf, which
is modified to support the same command line as its predecessor.

The roots of the parsing are default-confi

build: switch to Kconfig

The make_device_config.sh script is replaced by minikconf, which
is modified to support the same command line as its predecessor.

The roots of the parsing are default-configs/*.mak, Kconfig.host and
hw/Kconfig. One difference with make_device_config.sh is that all symbols
have to be defined in a Kconfig file, including those coming from the
configure script. This is the reason for the Kconfig.host file introduced
in the previous patch. Whenever a file in default-configs/*.mak used
$(...) to refer to a config-host.mak symbol, this is replaced by a
Kconfig dependency; this part must be done already in this patch
for bisectability.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-28-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

kconfig: introduce kconfig files

The Kconfig files were generated mostly with this script:

for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do
set fnord `git grep -lw $i --

kconfig: introduce kconfig files

The Kconfig files were generated mostly with this script:

for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do
set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' `
shift
if test $# = 1; then
cat >> $(dirname $1)/Kconfig << EOF
config ${i#CONFIG_}
bool

EOF
git add $(dirname $1)/Kconfig
else
echo $i $*
fi
done
sed -i '$d' hw/*/Kconfig
for i in hw/*; do
if test -d $i && ! test -f $i/Kconfig; then
touch $i/Kconfig
git add $i/Kconfig
fi
done

Whenever a symbol is referenced from multiple subdirectories, the
script prints the list of directories that reference the symbol.
These symbols have to be added manually to the Kconfig files.

Kconfig.host and hw/Kconfig were created manually.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20190123065618.3520-27-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...