hw/timer/armv7m_systick: Update clock source before enabling timer

Starting the SysTick timer and changing the clock source a the same time
will result in an error, if the previous clock period was

hw/timer/armv7m_systick: Update clock source before enabling timer

Starting the SysTick timer and changing the clock source a the same time
will result in an error, if the previous clock period was zero. For exmaple,
on the mps2-tz platforms, no refclk is present. Right after reset, the
configured ptimer period is zero, and trying to enabling it will turn it off
right away. E.g., code running on the platform setting

SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | SysTick_CTRL_ENABLE_Msk;

should change the clock source and enable the timer on real hardware, but
resulted in an error in qemu.

Signed-off-by: Richard Petri <git@rpls.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220201192650.289584-1-git@rpls.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

arm: Remove system_clock_scale global

All the devices that used to use system_clock_scale have now been
converted to use Clock inputs instead, so the global is no longer
needed; remove it and all th

arm: Remove system_clock_scale global

All the devices that used to use system_clock_scale have now been
converted to use Clock inputs instead, so the global is no longer
needed; remove it and all the code that sets it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210812093356.1946-26-peter.maydell@linaro.org

show more ...

hw/timer/armv7m_systick: Use clock inputs instead of system_clock_scale

Now that all users of the systick devices wire up the clock inputs,
use those instead of the system_clock_scale and the hardwi

hw/timer/armv7m_systick: Use clock inputs instead of system_clock_scale

Now that all users of the systick devices wire up the clock inputs,
use those instead of the system_clock_scale and the hardwired 1MHz
value for the reference clock.

This will fix various board models where we were incorrectly
providing a 1MHz reference clock instead of some other value or
instead of providing no reference clock at all.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Message-id: 20210812093356.1946-22-peter.maydell@linaro.org

show more ...

hw/timer/armv7m_systick: Add input clocks

The v7M systick timer can be programmed to run from either of
two clocks:
* an "external reference clock" (when SYST_CSR.CLKSOURCE == 0)
* the main CPU cl

hw/timer/armv7m_systick: Add input clocks

The v7M systick timer can be programmed to run from either of
two clocks:
* an "external reference clock" (when SYST_CSR.CLKSOURCE == 0)
* the main CPU clock (when SYST_CSR.CLKSOURCE == 1)

Our implementation currently hardwires the external reference clock
to be 1MHz, and allows boards to set the main CPU clock frequency via
the global 'system_clock_scale'. (Most boards set that to a constant
value; the Stellaris boards allow the guest to reprogram it via the
board-specific RCC registers).

As the first step in converting this to use the Clock infrastructure,
add input clocks to the systick device for the reference clock and
the CPU clock. The device implementation ignores them; once we have
made all the users of the device correctly wire up the new Clocks we
will switch the implementation to use them and ignore the old
system_clock_scale.

This is a migration compat break for all M-profile boards, because of
the addition of the new clock objects to the vmstate struct.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20210812093356.1946-6-peter.maydell@linaro.org

show more ...

Merge remote-tracking branch 'remotes/nvme/tags/pull-nvme-20201102' into staging

nvme pull 2 Nov 2020

# gpg: Signature made Mon 02 Nov 2020 15:20:30 GMT
# gpg: us

Merge remote-tracking branch 'remotes/nvme/tags/pull-nvme-20201102' into staging

nvme pull 2 Nov 2020

# gpg: Signature made Mon 02 Nov 2020 15:20:30 GMT
# gpg: using RSA key DBC11D2D373B4A3755F502EC625156610A4F6CC0
# gpg: Good signature from "Keith Busch <kbusch@kernel.org>" [unknown]
# gpg: aka "Keith Busch <keith.busch@gmail.com>" [unknown]
# gpg: aka "Keith Busch <keith.busch@intel.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: DBC1 1D2D 373B 4A37 55F5 02EC 6251 5661 0A4F 6CC0

* remotes/nvme/tags/pull-nvme-20201102: (30 commits)
hw/block/nvme: fix queue identifer validation
hw/block/nvme: fix create IO SQ/CQ status codes
hw/block/nvme: fix prp mapping status codes
hw/block/nvme: report actual LBA data shift in LBAF
hw/block/nvme: add trace event for requests with non-zero status code
hw/block/nvme: add nsid to get/setfeat trace events
hw/block/nvme: reject io commands if only admin command set selected
hw/block/nvme: support for admin-only command set
hw/block/nvme: validate command set selected
hw/block/nvme: support per-namespace smart log
hw/block/nvme: fix log page offset check
hw/block/nvme: remove pointless rw indirection
hw/block/nvme: update nsid when registered
hw/block/nvme: change controller pci id
pci: allocate pci id for nvme
hw/block/nvme: support multiple namespaces
hw/block/nvme: refactor identify active namespace id list
hw/block/nvme: add support for sgl bit bucket descriptor
hw/block/nvme: add support for scatter gather lists
hw/block/nvme: harden cmb access
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/kraxel/tags/modules-20201029-pull-request' into staging

modules: build virtio-gpu-pci & virtio-vga modular.
modules: various bugfixes, mostly for ma

Merge remote-tracking branch 'remotes/kraxel/tags/modules-20201029-pull-request' into staging

modules: build virtio-gpu-pci & virtio-vga modular.
modules: various bugfixes, mostly for macos.

# gpg: Signature made Thu 29 Oct 2020 11:09:41 GMT
# gpg: using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/modules-20201029-pull-request:
modules: turn off lazy binding
modules: unbreak them on macos
virtio-gpu: only compile virtio-gpu-3d.c for CONFIG_VIRGL=y
virtio-gpu: add virtio-vga module
virtio-gpu: add virtio-gpu-pci module

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/berrange-gitlab/tags/misc-next-pull-request' into staging

Misc fixes

* Improve socket cnnection failure error reporting
* Fix LGPL versio

Merge remote-tracking branch 'remotes/berrange-gitlab/tags/misc-next-pull-request' into staging

Misc fixes

* Improve socket cnnection failure error reporting
* Fix LGPL version number

# gpg: Signature made Thu 29 Oct 2020 10:00:47 GMT
# gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF

* remotes/berrange-gitlab/tags/misc-next-pull-request:
util: include the target address in socket connect failures
io: Don't use '#' flag of printf format
authz: Fix Lesser GPL version number
crypt: Fix Lesser GPL version number
io: Fix Lesser GPL version number

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/mcayland/tags/qemu-sparc-20201028' into staging

qemu-sparc queue

# gpg: Signature made Wed 28 Oct 2020 08:17:23 GMT
# gpg: u

Merge remote-tracking branch 'remotes/mcayland/tags/qemu-sparc-20201028' into staging

qemu-sparc queue

# gpg: Signature made Wed 28 Oct 2020 08:17:23 GMT
# gpg: using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F
# gpg: issuer "mark.cave-ayland@ilande.co.uk"
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [full]
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F

* remotes/mcayland/tags/qemu-sparc-20201028:
hw/pci-host/sabre: Simplify code initializing variable once
hw/pci-host/sabre: Remove superfluous address range check
hw/pci-host/sabre: Update documentation link
sabre: increase number of PCI bus IRQs from 32 to 64
hw/display/tcx: Allow 64-bit accesses to framebuffer stippler and blitter
sabre: don't call sysbus_mmio_map() in sabre_realize()
sparc32-ledma: don't reference nd_table directly within the device
sparc32-espdma: use object_initialize_child() for esp child object
sparc32-ledma: use object_initialize_child() for lance child object
sparc32-dma: use object_initialize_child() for espdma and ledma child objects

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20201027' into staging

Optimize across branches.
Add logging for cpu_io_recompile.

# gpg: Signature made Tue 27 Oc

Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20201027' into staging

Optimize across branches.
Add logging for cpu_io_recompile.

# gpg: Signature made Tue 27 Oct 2020 16:48:50 GMT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F

* remotes/rth-gitlab/tags/pull-tcg-20201027:
accel/tcg: Add CPU_LOG_EXEC tracing for cpu_io_recompile()
tcg/optimize: Flush data at labels not TCG_OPF_BB_END
tcg: Do not kill globals at conditional branches

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-5.2-pull-request' into staging

Pull request trivial branch 20201027

# gpg: Signature made Tue 27 Oct 2020 16:29

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-5.2-pull-request' into staging

Pull request trivial branch 20201027

# gpg: Signature made Tue 27 Oct 2020 16:29:47 GMT
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-branch-for-5.2-pull-request:
CHANGELOG: remove disused file
qdev: Fix two typos
scripts/qmp: delete 'qmp' script
cryptodev: Fix Lesser GPL version number
io: Fix Lesser GPL version number
cpus: Drop declaration of cpu_remove()
Makefile: Add *.[ch].inc files to cscope/ctags/TAGS
elf2dmp: Fix memory leak on main() error paths

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- qcow2: Skip copy-on-write when allocating a zero cluster
- qemu-img: add suppo

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- qcow2: Skip copy-on-write when allocating a zero cluster
- qemu-img: add support for rate limit in qemu-img convert/commit
- Fix deadlock when deleting a block node during drain_all

# gpg: Signature made Tue 27 Oct 2020 15:14:07 GMT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream:
block: End quiescent sections when a BDS is deleted
qcow2: Skip copy-on-write when allocating a zero cluster
qcow2: Report BDRV_BLOCK_ZERO more accurately in bdrv_co_block_status()
qemu-img: add support for rate limit in qemu-img convert
qemu-img: add support for rate limit in qemu-img commit

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/jsnow-gitlab/tags/ide-pull-request' into staging

IDE Pull request

# gpg: Signature made Tue 27 Oct 2020 14:41:59 GMT
# gpg:

Merge remote-tracking branch 'remotes/jsnow-gitlab/tags/ide-pull-request' into staging

IDE Pull request

# gpg: Signature made Tue 27 Oct 2020 14:41:59 GMT
# gpg: using RSA key F9B7ABDBBCACDF95BE76CBD07DEF8106AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" [full]
# Primary key fingerprint: FAEB 9711 A12C F475 812F 18F2 88A9 064D 1835 61EB
# Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76 CBD0 7DEF 8106 AAFC 390E

* remotes/jsnow-gitlab/tags/ide-pull-request:
ide: clear SRST after SRST finishes
ide: perform SRST as early as possible
ide: run diagnostic after SRST

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.2-20201028' into staging

ppc patch queue 2020-10-28

Here's the next pull request for ppc and spapr related patches, whic

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.2-20201028' into staging

ppc patch queue 2020-10-28

Here's the next pull request for ppc and spapr related patches, which
should be the last things for soft freeze. Includes:

* Numerous error handling cleanups from Greg Kurz
* Cleanups to cpu realization and hotplug handling from Greg Kurz
* A handful of other small fixes and cleanups

This does include a change to pc_dimm_plug() that isn't in my normal
areas of concern. That's there as a a prerequisite for ppc specific
changes, and has an ack from Igor.

# gpg: Signature made Tue 27 Oct 2020 14:13:21 GMT
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-5.2-20201028:
ppc/: fix some comment spelling errors
spapr: Improve spapr_reallocate_hpt() error reporting
target/ppc: Fix kvmppc_load_htab_chunk() error reporting
spapr: Use error_append_hint() in spapr_reallocate_hpt()
spapr: Simplify error handling in spapr_memory_plug()
spapr: Pass &error_abort when getting some PC DIMM properties
spapr: Use appropriate getter for PC_DIMM_SLOT_PROP
spapr: Use appropriate getter for PC_DIMM_ADDR_PROP
pc-dimm: Drop @errp argument of pc_dimm_plug()
spapr: Simplify spapr_cpu_core_realize() and spapr_cpu_core_unrealize()
spapr: Make spapr_cpu_core_unrealize() idempotent
spapr: Drop spapr_delete_vcpu() unused argument
spapr: Unrealize vCPUs with qdev_unrealize()
spapr: Fix leak of CPU machine specific data
spapr: Move spapr_create_nvdimm_dr_connectors() to core machine code
hw/net: move allocation to the heap due to very large stack frame
ppc/spapr: re-assert IRQs during event-scan if there are pending
spapr: Clarify why DR connectors aren't user creatable

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20201027-1' into staging

target-arm queue:
* raspi: add model of cprman clock manager
* sbsa-ref: add an SBSA ge

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20201027-1' into staging

target-arm queue:
* raspi: add model of cprman clock manager
* sbsa-ref: add an SBSA generic watchdog device
* arm/trace: Fix hex printing
* raspi: Add models of Pi 3 model A+, Pi Zero and Pi A+
* hw/arm/smmuv3: Set the restoration priority of the vSMMUv3 explicitly
* Nuvoton NPCM7xx: Add USB, RNG, GPIO and watchdog support
* hw/arm: fix min_cpus for xlnx-versal-virt platform
* hw/arm/highbank: Silence warnings about missing fallthrough statements
* linux-user: Support Aarch64 BTI
* Armv7M systick: fix corner case bugs by rewriting to use ptimer

# gpg: Signature made Tue 27 Oct 2020 11:27:10 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20201027-1: (48 commits)
hw/timer/armv7m_systick: Rewrite to use ptimers
hw/core/ptimer: Support ptimer being disabled by timer callback
hw/arm/sbsa-ref: add SBSA watchdog device
hw/watchdog: Implement SBSA watchdog device
hw/arm/bcm2835_peripherals: connect the UART clock
hw/char/pl011: add a clock input
hw/misc/bcm2835_cprman: add sane reset values to the registers
hw/misc/bcm2835_cprman: add the DSI0HSCK multiplexer
hw/misc/bcm2835_cprman: implement clock mux behaviour
hw/misc/bcm2835_cprman: add a clock mux skeleton implementation
hw/misc/bcm2835_cprman: implement PLL channels behaviour
hw/misc/bcm2835_cprman: add a PLL channel skeleton implementation
hw/misc/bcm2835_cprman: implement PLLs behaviour
hw/misc/bcm2835_cprman: add a PLL skeleton implementation
hw/arm/raspi: add a skeleton implementation of the CPRMAN
hw/arm/raspi: fix CPRMAN base address
hw/core/clock: trace clock values in Hz instead of ns
hw/core/clock: provide the VMSTATE_ARRAY_CLOCK macro
arm/trace: Fix hex printing
hw/arm/raspi: Add the Raspberry Pi 3 model A+
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/timer/armv7m_systick: Rewrite to use ptimers

The armv7m systick timer is a 24-bit decrementing, wrap-on-zero,
clear-on-write counter. Our current implementation has various
bugs a

hw/timer/armv7m_systick: Rewrite to use ptimers

The armv7m systick timer is a 24-bit decrementing, wrap-on-zero,
clear-on-write counter. Our current implementation has various
bugs and dubious workarounds in it (for instance see
https://bugs.launchpad.net/qemu/+bug/1872237).

We have an implementation of a simple decrementing counter
and we put a lot of effort into making sure it handles the
interesting corner cases (like "spend a cycle at 0 before
reloading") -- ptimer.

Rewrite the systick timer to use a ptimer rather than
a raw QEMU timer.

Unfortunately this is a migration compatibility break,
which will affect all M-profile boards.

Among other bugs, this fixes
https://bugs.launchpad.net/qemu/+bug/1872237 :
now writes to SYST_CVR when the timer is enabled correctly
do nothing; when the timer is enabled via SYST_CSR.ENABLE,
the ptimer code will (because of POLICY_NO_IMMEDIATE_RELOAD)
arrange that after one timer tick the counter is reloaded
from SYST_RVR and then counts down from there, as the
architecture requires.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201015151829.14656-3-peter.maydell@linaro.org

show more ...

hw/timer/armv7m_systick: assert that board code set system_clock_scale

It is the responsibility of board code for an armv7m system to set
system_clock_scale appropriately for the CPU spe

hw/timer/armv7m_systick: assert that board code set system_clock_scale

It is the responsibility of board code for an armv7m system to set
system_clock_scale appropriately for the CPU speed of the core.
If it forgets to do this, then QEMU will hang if the guest tries
to use the systick timer in the "tick at the CPU clock frequency" mode.

We forgot that in a couple of our boards (see commits ce4f70e81ed23c93f,
e7e5a9595ab1136). Add an assertion in the systick reset method so
we don't let any new boards in with the same bug.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200825160847.18091-1-peter.maydell@linaro.org

show more ...

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* various small fixes and cleanups
* fixes for the ucode revision patch from the previous pull request

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* various small fixes and cleanups
* fixes for the ucode revision patch from the previous pull request

# gpg: Signature made Wed 12 Feb 2020 15:30:24 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream:
target/i386: enable monitor and ucode revision with -cpu max
target/i386: check for availability of MSR_IA32_UCODE_REV as an emulated MSR
target/i386: fix TCG UCODE_REV access
build: move TARGET_GPROF to config-host.mak
exec: do not define use_icount for user-mode emulation
minikconf: accept alnum identifiers
Remove support for CLOCK_MONOTONIC not being defined
seqlock: fix seqlock_write_unlock_impl function
vl: Don't mismatch g_strsplit()/g_free()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging

Pull request

# gpg: Signature made Mon 10 Feb 2020 09:23:42 GMT
# gpg: using

Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging

Pull request

# gpg: Signature made Mon 10 Feb 2020 09:23:42 GMT
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/block-pull-request:
hw/core: Allow setting 'virtio-blk-device.scsi' property on OSX host
block: fix crash on zero-length unaligned write and read

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/gkurz/tags/9p-next-2020-02-08' into staging

9p patches:
- some more protocol sanity checks
- qtest for readdir
- Christian Schoenebeck now o

Merge remote-tracking branch 'remotes/gkurz/tags/9p-next-2020-02-08' into staging

9p patches:
- some more protocol sanity checks
- qtest for readdir
- Christian Schoenebeck now official reviewer

# gpg: Signature made Sat 08 Feb 2020 08:38:10 GMT
# gpg: using RSA key B4828BAF943140CEF2A3491071D4D5E5822F73D6
# gpg: Good signature from "Greg Kurz <groug@kaod.org>" [full]
# gpg: aka "Gregory Kurz <gregory.kurz@free.fr>" [full]
# gpg: aka "[jpeg image of size 3330]" [full]
# Primary key fingerprint: B482 8BAF 9431 40CE F2A3 4910 71D4 D5E5 822F 73D6

* remotes/gkurz/tags/9p-next-2020-02-08:
MAINTAINERS: 9pfs: Add myself as reviewer
tests/virtio-9p: added readdir test
hw/9pfs/9p-synth: added directory for readdir test
9pfs: validate count sent by client with T_readdir
9pfs: require msize >= 4096
tests/virtio-9p: add terminating null in v9fs_string_read()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/philmd-gitlab/tags/python-next-20200207' into staging

- Python 3 cleanups:
. Remove text about Python 2 in qemu-deprecated (Thomas)
. Remove

Merge remote-tracking branch 'remotes/philmd-gitlab/tags/python-next-20200207' into staging

- Python 3 cleanups:
. Remove text about Python 2 in qemu-deprecated (Thomas)
. Remove shebang header (Paolo, Philippe)
. scripts/checkpatch.pl now allows Python 3 interpreter (Philippe)
. Explicit usage of Python 3 interpreter in scripts (Philippe)
. Fix Python scripts permissions (Paolo, Philippe)
. Drop 'from __future__ import print_function' (Paolo)
. Specify minimum python requirements in ReadTheDocs configuration (Alex)
- Test UNIX/EXEC transports with migration (Oksana)
- Added extract_from_rpm helper, improved extract_from_deb (Liam)
- Allow to use other serial consoles than default one (Philippe)
- Various improvements in QEMUMonitorProtocol (Wainer)
- Fix kvm_available() on ppc64le (Wainer)

# gpg: Signature made Fri 07 Feb 2020 15:01:56 GMT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE

* remotes/philmd-gitlab/tags/python-next-20200207: (46 commits)
.readthedocs.yml: specify some minimum python requirements
drop "from __future__ import print_function"
make all Python scripts executable
scripts/signrom: remove Python 2 support, add shebang
tests/qemu-iotests/check: Only check for Python 3 interpreter
scripts: Explicit usage of Python 3 (scripts without __main__)
tests/qemu-iotests: Explicit usage of Python3 (scripts without __main__)
tests/vm: Remove shebang header
tests/acceptance: Remove shebang header
scripts/tracetool: Remove shebang header
scripts/minikconf: Explicit usage of Python 3
scripts: Explicit usage of Python 3 (scripts with __main__)
tests: Explicit usage of Python 3
tests/qemu-iotests: Explicit usage of Python 3 (scripts with __main__)
tests/qemu-iotests/check: Allow use of python3 interpreter
scripts/checkpatch.pl: Only allow Python 3 interpreter
tests/acceptance/migration: Default to -nodefaults
tests/acceptance/migration: Add the 'migration' tag
tests/acceptance/migration: Test EXEC transport when migrating
tests/acceptance/migration: Test UNIX transport when migrating
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200207' into staging

target-arm queue:
* monitor: fix query-cpu-model-expansion crash when using machine type none

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200207' into staging

target-arm queue:
* monitor: fix query-cpu-model-expansion crash when using machine type none
* Support emulation of the ARMv8.1-VHE architecture feature
* bcm2835_dma: fix bugs in TD mode handling
* docs/arm-cpu-features: Make kvm-no-adjvtime comment clearer
* stellaris, stm32f2xx_timer, armv7m_systick: fix minor memory leaks

# gpg: Signature made Fri 07 Feb 2020 14:32:28 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20200207: (48 commits)
stellaris: delay timer_new to avoid memleaks
stm32f2xx_timer: delay timer_new to avoid memleaks
armv7m_systick: delay timer_new to avoid memleaks
docs/arm-cpu-features: Make kvm-no-adjvtime comment clearer
bcm2835_dma: Re-initialize xlen in TD mode
bcm2835_dma: Fix the ylen loop in TD mode
target/arm: Raise only one interrupt in arm_cpu_exec_interrupt
target/arm: Use bool for unmasked in arm_excp_unmasked
target/arm: Pass more cpu state to arm_excp_unmasked
target/arm: Move arm_excp_unmasked to cpu.c
target/arm: Enable ARMv8.1-VHE in -cpu max
target/arm: Update arm_cpu_do_interrupt_aarch64 for VHE
target/arm: Update get_a64_user_mem_index for VHE
target/arm: check TGE and E2H flags for EL0 pauth traps
target/arm: Update {fp,sve}_exception_el for VHE
target/arm: Update arm_phys_excp_target_el for TGE
target/arm: Flush tlbs for E2&0 translation regime
target/arm: Flush tlb for ASID changes in EL2&0 translation regime
target/arm: Add VHE timer register redirection and aliasing
target/arm: Add VHE system register redirection and aliasing
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

armv7m_systick: delay timer_new to avoid memleaks

There is a memory leak when we call 'device_list_properties' with typename = armv7m_systick. It's easy to reproduce as follow:

vi

armv7m_systick: delay timer_new to avoid memleaks

There is a memory leak when we call 'device_list_properties' with typename = armv7m_systick. It's easy to reproduce as follow:

virsh qemu-monitor-command vm1 --pretty '{"execute": "device-list-properties", "arguments": {"typename": "armv7m_systick"}}'

This patch delay timer_new to fix this memleaks.

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Message-id: 20200205070659.22488-2-pannengyuan@huawei.com
Cc: qemu-arm@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20190816' into staging

target-arm queue:
* target/arm: generate a custom MIDR for -cpu max
* hw/misc/zynq_slcr:

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20190816' into staging

target-arm queue:
* target/arm: generate a custom MIDR for -cpu max
* hw/misc/zynq_slcr: refactor to use standard register definition
* Set ENET_BD_BDU in I.MX FEC controller
* target/arm: Fix routing of singlestep exceptions
* refactor a32/t32 decoder handling of PC
* minor optimisations/cleanups of some a32/t32 codegen
* target/arm/cpu64: Ensure kvm really supports aarch64=off
* target/arm/cpu: Ensure we can use the pmu with kvm
* target/arm: Minor cleanups preparatory to KVM SVE support

# gpg: Signature made Fri 16 Aug 2019 14:15:55 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20190816: (29 commits)
target/arm: Use tcg_gen_extrh_i64_i32 to extract the high word
target/arm: Simplify SMMLA, SMMLAR, SMMLS, SMMLSR
target/arm: Use tcg_gen_rotri_i32 for gen_swap_half
target/arm: Use ror32 instead of open-coding the operation
target/arm: Remove redundant shift tests
target/arm: Use tcg_gen_deposit_i32 for PKHBT, PKHTB
target/arm: Use tcg_gen_extract_i32 for shifter_out_im
target/arm/kvm64: Move the get/put of fpsimd registers out
target/arm/kvm64: Fix error returns
target/arm/cpu: Use div-round-up to determine predicate register array size
target/arm/helper: zcr: Add build bug next to value range assumption
target/arm/cpu: Ensure we can use the pmu with kvm
target/arm/cpu64: Ensure kvm really supports aarch64=off
target/arm: Remove helper_double_saturate
target/arm: Use unallocated_encoding for aarch32
target/arm: Remove offset argument to gen_exception_bkpt_insn
target/arm: Replace offset with pc in gen_exception_internal_insn
target/arm: Replace offset with pc in gen_exception_insn
target/arm: Replace s->pc with s->base.pc_next
target/arm: Remove redundant s->pc & ~1
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- file-posix: Fix O_DIRECT alignment detection
- Fixes for concurrent block jobs

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- file-posix: Fix O_DIRECT alignment detection
- Fixes for concurrent block jobs
- block-backend: Queue requests while drained (fix IDE vs. job crashes)
- qemu-img convert: Deprecate using -n and -o together
- iotests: Migration tests with filter nodes
- iotests: More media change tests

# gpg: Signature made Fri 16 Aug 2019 10:29:18 BST
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream:
file-posix: Handle undetectable alignment
qemu-img convert: Deprecate using -n and -o together
block-backend: Queue requests while drained
mirror: Keep mirror_top_bs drained after dropping permissions
block: Remove blk_pread_unthrottled()
iotests: Add test for concurrent stream/commit
tests: Test mid-drain bdrv_replace_child_noperm()
tests: Test polling in bdrv_drop_intermediate()
block: Reduce (un)drains when replacing a child
block: Keep subtree drained in drop_intermediate
block: Simplify bdrv_filter_default_perms()
iotests: Test migration with all kinds of filter nodes
iotests: Move migration helpers to iotests.py
iotests/118: Add -blockdev based tests
iotests/118: Create test classes dynamically
iotests/118: Test media change for scsi-cd

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2019-08-15' into staging

nbd patches for 2019-08-15

- Addition of InetSocketAddress keep-alive
- Addition of BDRV_REQ_P

Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2019-08-15' into staging

nbd patches for 2019-08-15

- Addition of InetSocketAddress keep-alive
- Addition of BDRV_REQ_PREFETCH for more efficient copy-on-read
- Initial refactoring in preparation of NBD reconnect

# gpg: Signature made Thu 15 Aug 2019 19:28:41 BST
# gpg: using RSA key A7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg: aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A

* remotes/ericb/tags/pull-nbd-2019-08-15:
block/nbd: refactor nbd connection parameters
block/nbd: add cmdline and qapi parameter reconnect-delay
block/nbd: move from quit to state
block/nbd: use non-blocking io channel for nbd negotiation
block/nbd: split connection_co start out of nbd_client_connect
nbd: improve CMD_CACHE: use BDRV_REQ_PREFETCH
block/stream: use BDRV_REQ_PREFETCH
block: implement BDRV_REQ_PREFETCH
qapi: Add InetSocketAddress member keep-alive

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...