hw/isa/vt82c686: Turn "intr" irq into a named gpio

Makes the code more comprehensible, matches the datasheet and
the piix4 device model.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed

hw/isa/vt82c686: Turn "intr" irq into a named gpio

Makes the code more comprehensible, matches the datasheet and
the piix4 device model.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240704205854.18537-2-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

show more ...

hw/mips/fuloong2e: use pci_init_nic_devices()

The previous behaviour was: *if* the first NIC specified on the command
line was an RTL8139 (or unspecified model) then it gets assigned to PCI
slot 7,

hw/mips/fuloong2e: use pci_init_nic_devices()

The previous behaviour was: *if* the first NIC specified on the command
line was an RTL8139 (or unspecified model) then it gets assigned to PCI
slot 7, which is where the Fuloong board had an RTL8139. All other
devices (including the first, if it was specified as anything other than
an rtl8319) get dynamically assigned on the bus.

The new behaviour is subtly different: If the first NIC was given a
specific model *other* than rtl8139, and a subsequent NIC was not,
then the rtl8139 (or unspecified) NIC will go to slot 7 and the rest
will be dynamically assigned.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

show more ...

hw/mips: Merge 'hw/mips/cpudevs.h' with 'target/mips/cpu.h'

"hw/mips/cpudevs.h" contains declarations which are specific
to the MIPS architecture; it doesn't make sense for these to
be called from a

hw/mips: Merge 'hw/mips/cpudevs.h' with 'target/mips/cpu.h'

"hw/mips/cpudevs.h" contains declarations which are specific
to the MIPS architecture; it doesn't make sense for these to
be called from a non-MIPS architecture. Move the declarations
to "target/mips/cpu.h".

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231009171443.12145-2-philmd@linaro.org>

show more ...

hw/mips: Merge 'hw/mips/cpudevs.h' with 'target/mips/cpu.h'

"hw/mips/cpudevs.h" contains declarations which are specific
to the MIPS architecture; it doesn't make sense for these to
be called from a

hw/mips: Merge 'hw/mips/cpudevs.h' with 'target/mips/cpu.h'

"hw/mips/cpudevs.h" contains declarations which are specific
to the MIPS architecture; it doesn't make sense for these to
be called from a non-MIPS architecture. Move the declarations
to "target/mips/cpu.h".

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231009171443.12145-2-philmd@linaro.org>

show more ...

vt82c686 machines: Support machine-default audiodev with fallback

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

hw/pci/pci: Remove multifunction parameter from pci_create_simple_multifunction()

There is also pci_create_simple() which creates non-multifunction PCI
devices. Accordingly the parameter is always s

hw/pci/pci: Remove multifunction parameter from pci_create_simple_multifunction()

There is also pci_create_simple() which creates non-multifunction PCI
devices. Accordingly the parameter is always set to true when a multi
function PCI device is to be created.

The reason for the parameter's existence seems to be that it is used in the
internal PCI code as well which is the only location where it gets set to
false. This one usage can be replaced by trivial code.

Remove this redundant, error-prone parameter.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230304114043.121024-5-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

hw/mips/bootloader: Handle buffers as opaque arrays

It is irrelevant to the API what the buffers to fill are made of.
In particular, some MIPS ISA have 16-bit wide instructions.

Signed-off-by: Phil

hw/mips/bootloader: Handle buffers as opaque arrays

It is irrelevant to the API what the buffers to fill are made of.
In particular, some MIPS ISA have 16-bit wide instructions.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221211204533.85359-2-philmd@linaro.org>

show more ...

hw/mips/bootloader: Allow bl_gen_jump_kernel to optionally set register

When one of the $sp/$a[0..3] register is already set, we might
want bl_gen_jump_kernel() to NOT set it again. Pass a boolean
a

hw/mips/bootloader: Allow bl_gen_jump_kernel to optionally set register

When one of the $sp/$a[0..3] register is already set, we might
want bl_gen_jump_kernel() to NOT set it again. Pass a boolean
argument for each register, to allow to optionally set them.

Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221026191821.28167-2-philmd@linaro.org>

show more ...

hw: Remove unused MAX_IDE_BUS define

Several machines have an unused MAX_IDE_BUS define. Remove it from
these machines that don't need it.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewe

hw: Remove unused MAX_IDE_BUS define

Several machines have an unused MAX_IDE_BUS define. Remove it from
these machines that don't need it.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220917115136.A32EF746E06@zero.eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

show more ...

hw/isa/vt82c686: Create rtc-time alias in boards instead

According to good QOM practice, an object should only deal with objects
of its own sub tree. Having devices create an alias on the machine
ob

hw/isa/vt82c686: Create rtc-time alias in boards instead

According to good QOM practice, an object should only deal with objects
of its own sub tree. Having devices create an alias on the machine
object doesn't respect this good practice. To resolve this, create the
alias in the machine's code.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220901114127.53914-14-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

show more ...

hw/mips/fuloong2e: Inline vt82c686b_southbridge_init() and remove it

The previous patches moved most of this function into the via-isa device
model such that it has become fairly trivial. So inline

hw/mips/fuloong2e: Inline vt82c686b_southbridge_init() and remove it

The previous patches moved most of this function into the via-isa device
model such that it has become fairly trivial. So inline it for
simplicity.

Suggested-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220901114127.53914-12-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

show more ...

hw/isa/vt82c686: Instantiate AC97 and MC97 functions in host device

The AC97 function's wakeup status is wired to the PM function and both
the AC97 and MC97 interrupt routing is determined by the IS

hw/isa/vt82c686: Instantiate AC97 and MC97 functions in host device

The AC97 function's wakeup status is wired to the PM function and both
the AC97 and MC97 interrupt routing is determined by the ISA function.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220901114127.53914-11-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

show more ...

hw/isa/vt82c686: Instantiate PM function in host device

The PM controller has activity bits which monitor activity of other
built-in devices in the host device.

Signed-off-by: Bernhard Beschow <she

hw/isa/vt82c686: Instantiate PM function in host device

The PM controller has activity bits which monitor activity of other
built-in devices in the host device.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220901114127.53914-10-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

show more ...

hw/isa/vt82c686: Instantiate USB functions in host device

The USB functions can be enabled/disabled through the ISA function. Also
its interrupt routing can be influenced there.

Signed-off-by: Bern

hw/isa/vt82c686: Instantiate USB functions in host device

The USB functions can be enabled/disabled through the ISA function. Also
its interrupt routing can be influenced there.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220901114127.53914-9-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

show more ...

hw/isa/vt82c686: Introduce TYPE_VT82C686B_USB_UHCI define

Suggested-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f

hw/isa/vt82c686: Introduce TYPE_VT82C686B_USB_UHCI define

Suggested-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220901114127.53914-8-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

show more ...

hw/isa/vt82c686: Instantiate IDE function in host device

The IDE function is closely tied to the ISA function (e.g. the IDE
interrupt routing happens there), so it makes sense that the IDE
function

hw/isa/vt82c686: Instantiate IDE function in host device

The IDE function is closely tied to the ISA function (e.g. the IDE
interrupt routing happens there), so it makes sense that the IDE
function is instantiated within the south bridge itself.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220901114127.53914-7-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

show more ...

hw/isa/vt82c686: Introduce TYPE_VIA_IDE define

Establishes consistency with other (VIA) devices.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat

hw/isa/vt82c686: Introduce TYPE_VIA_IDE define

Establishes consistency with other (VIA) devices.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220901114127.53914-6-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

show more ...

Warn user if the vga flag is passed but no vga device is created

A global boolean variable "vga_interface_created"(declared in softmmu/globals.c)
has been used to track the creation of vga interface

Warn user if the vga flag is passed but no vga device is created

A global boolean variable "vga_interface_created"(declared in softmmu/globals.c)
has been used to track the creation of vga interface. If the vga flag is passed
in the command line "default_vga"(declared in softmmu/vl.c) variable is set to 0.
To warn user, the condition checks if vga_interface_created is false
and default_vga is equal to 0. If "-vga none" is passed, this patch will not warn the
user regarding the creation of VGA device.

The warning "A -vga option was passed but this
machine type does not use that option; no VGA device has been created"
is logged if vga flag is passed but no vga device is created.

This patch has been tested for x86_64, i386, sparc, sparc64 and arm boards.

Signed-off-by: Gautam Agrawal <gautamnagrawal@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/581
Message-Id: <20220501122505.29202-1-gautamnagrawal@gmail.com>
[thuth: Fix wrong warning with "-device" in some cases as reported by Paolo]
Signed-off-by: Thomas Huth <thuth@redhat.com>

show more ...

Remove qemu-common.h include from most units

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-33-marcandre.lureau@redhat.com>
Signed-off-by: Paolo B

Remove qemu-common.h include from most units

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-33-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

Replace GCC_FMT_ATTR with G_GNUC_PRINTF

One less qemu-specific macro. It also helps to make some headers/units
only depend on glib, and thus moved in standalone projects eventually.

Signed-off-by:

Replace GCC_FMT_ATTR with G_GNUC_PRINTF

One less qemu-specific macro. It also helps to make some headers/units
only depend on glib, and thus moved in standalone projects eventually.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/vsementsov/tags/pull-simplebench-2021-05-04' into staging

scripts/simplebench improvements for 2021-05-04

# gpg: Signature made Tue 04 May 2021

Merge remote-tracking branch 'remotes/vsementsov/tags/pull-simplebench-2021-05-04' into staging

scripts/simplebench improvements for 2021-05-04

# gpg: Signature made Tue 04 May 2021 09:45:15 BST
# gpg: using RSA key 8B9C26CDB2FD147C880E86A1561F24C1F19F79FB
# gpg: Good signature from "Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8B9C 26CD B2FD 147C 880E 86A1 561F 24C1 F19F 79FB

* remotes/vsementsov/tags/pull-simplebench-2021-05-04:
MAINTAINERS: update Benchmark util: add git tree
simplebench/bench-backup: add --drop-caches argument
simplebench/bench-backup: add --count and --no-initial-run
simplebench/bench-backup: support qcow2 source files
simplebench/bench_block_job: handle error in BLOCK_JOB_COMPLETED
simplebench/bench-backup: add target-cache argument
simplebench/bench-backup: add --compressed option
simplebench: bench_one(): support count=1
simplebench: bench_one(): add slow_limit argument

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pc,pci,virtio: bugfixes, improvements

Fixes all over the place. Faster boot for virtio. ioeventfd support f

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pc,pci,virtio: bugfixes, improvements

Fixes all over the place. Faster boot for virtio. ioeventfd support for
mmio.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Fri 14 May 2021 15:27:13 BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
Fix build with 64 bits time_t
vhost-vdpa: Make vhost_vdpa_get_device_id() static
hw/virtio: enable ioeventfd configuring for mmio
hw/smbios: support for type 41 (onboard devices extended information)
checkpatch: Fix use of uninitialized value
virtio-scsi: Configure all host notifiers in a single MR transaction
virtio-scsi: Set host notifiers and callbacks separately
virtio-blk: Configure all host notifiers in a single MR transaction
virtio-blk: Fix rollback path in virtio_blk_data_plane_start()
pc-dimm: remove unnecessary get_vmstate_memory_region() method
amd_iommu: fix wrong MMIO operations
virtio-net: Constify VirtIOFeature feature_sizes[]
virtio-blk: Constify VirtIOFeature feature_sizes[]
hw/virtio: Pass virtio_feature_get_config_size() a const argument
x86: acpi: use offset instead of pointer when using build_header()
amd_iommu: Fix pte_override_page_mask()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
# hw/arm/virt.c

show more ...

Merge remote-tracking branch 'remotes/cminyard/tags/for-qemu-6.1-v1' into staging

Add a bus multiplexer device

This patch set adds a bus multiplexer and the necessary infrastructure

Merge remote-tracking branch 'remotes/cminyard/tags/for-qemu-6.1-v1' into staging

Add a bus multiplexer device

This patch set adds a bus multiplexer and the necessary infrastructure
in the I2C code to allow it to work.

These are common on systems with lots of I2C devices, like an IPMI BMC.

# gpg: Signature made Thu 13 May 2021 22:48:07 BST
# gpg: using RSA key FD0D5CE67CE0F59A6688268661F38C90919BFF81
# gpg: Good signature from "Corey Minyard <cminyard@mvista.com>" [unknown]
# gpg: aka "Corey Minyard <minyard@acm.org>" [unknown]
# gpg: aka "Corey Minyard <corey@minyard.net>" [unknown]
# gpg: aka "Corey Minyard <minyard@mvista.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FD0D 5CE6 7CE0 F59A 6688 2686 61F3 8C90 919B FF81

* remotes/cminyard/tags/for-qemu-6.1-v1:
hw/i2c: add pca954x i2c-mux switch
hw/i2c: move search to i2c_scan_bus method
hw/i2c: add match method for device search
hw/i2c: name I2CNode list in I2CBus

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/kraxel/tags/usb-20210505-pull-request' into staging

usb: fix some memory allocation issues (CVE-2021-3527).
usb: add stubs, allow building without u

Merge remote-tracking branch 'remotes/kraxel/tags/usb-20210505-pull-request' into staging

usb: fix some memory allocation issues (CVE-2021-3527).
usb: add stubs, allow building without usb subsystem.

# gpg: Signature made Wed 05 May 2021 14:07:02 BST
# gpg: using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/usb-20210505-pull-request:
usb: limit combined packets to 1 MiB (CVE-2021-3527)
usb/mtp: avoid dynamic stack allocation
usb/redir: avoid dynamic stack allocation (CVE-2021-3527)
usb/hid: avoid dynamic stack allocation
hw/usb: Do not build USB subsystem if not required
hw/usb/host-stub: Remove unused header

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/mcayland/tags/qemu-sparc-20210505' into staging

qemu-sparc queue

# gpg: Signature made Wed 05 May 2021 08:29:13 BST
# gpg: u

Merge remote-tracking branch 'remotes/mcayland/tags/qemu-sparc-20210505' into staging

qemu-sparc queue

# gpg: Signature made Wed 05 May 2021 08:29:13 BST
# gpg: using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F
# gpg: issuer "mark.cave-ayland@ilande.co.uk"
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [full]
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F

* remotes/mcayland/tags/qemu-sparc-20210505:
hw/sparc*: Move cpu_check_irqs() to target/sparc/
hw/sparc64: Fix code style for checkpatch.pl
hw/sparc64: Remove unused "hw/char/serial.h" header
hw/sparc: Allow building without the leon3 machine
hw/sparc/sun4m: Move each sun4m_hwdef definition in its class_init
hw/sparc/sun4m: Fix code style for checkpatch.pl
hw/sparc/sun4m: Register machine types in sun4m_machine_types[]
hw/sparc/sun4m: Factor out sun4m_machine_class_init()
hw/sparc/sun4m: Introduce Sun4mMachineClass
hw/sparc/sun4m: Have sun4m machines inherit new TYPE_SUN4M_MACHINE

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...