next-kbd: convert to use qemu_input_handler_register()

Convert the next-kbd device from the legacy UI qemu_add_kbd_event_handler()
function to use qemu_input_handler_register().

Signed-off-by: Mark

next-kbd: convert to use qemu_input_handler_register()

Convert the next-kbd device from the legacy UI qemu_add_kbd_event_handler()
function to use qemu_input_handler_register().

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20241106120928.242443-2-mark.cave-ayland@ilande.co.uk>
[thuth: Removed the NEXTKBD_NO_KEY definition - replaced by 0 now]
Signed-off-by: Thomas Huth <thuth@redhat.com>

show more ...

next-cube: remove cpu parameter from next_scsi_init()

The parameter is not used.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Messag

next-cube: remove cpu parameter from next_scsi_init()

The parameter is not used.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241023085852.1061031-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <thuth@redhat.com>

show more ...

next-cube: fix up compilation when DEBUG_NEXT is enabled

These were accidentally introduced by my last series.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Hu

next-cube: fix up compilation when DEBUG_NEXT is enabled

These were accidentally introduced by my last series.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241023085852.1061031-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <thuth@redhat.com>

show more ...

hw/m68k: Use explicit big-endian LD/ST API

The M68K architecture uses big endianness. Directly use
the big-endian LD/ST API.

Mechanical change using:

$ end=be; \
for acc in uw w l q tul; do

hw/m68k: Use explicit big-endian LD/ST API

The M68K architecture uses big endianness. Directly use
the big-endian LD/ST API.

Mechanical change using:

$ end=be; \
for acc in uw w l q tul; do \
sed -i -e "s/ld${acc}_p(/ld${acc}_${end}_p(/" \
-e "s/st${acc}_p(/st${acc}_${end}_p(/" \
$(git grep -wlE '(ld|st)t?u?[wlq]_p' hw/m68k/); \
done

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20241004163042.85922-18-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

show more ...

license: Update deprecated SPDX tag GPL-2.0 to GPL-2.0-only

The 'GPL-2.0' license identifier has been deprecated since license
list version 3.0 [1] and replaced by the 'GPL-2.0-only' tag [2].

[1] h

license: Update deprecated SPDX tag GPL-2.0 to GPL-2.0-only

The 'GPL-2.0' license identifier has been deprecated since license
list version 3.0 [1] and replaced by the 'GPL-2.0-only' tag [2].

[1] https://spdx.org/licenses/GPL-2.0.html
[2] https://spdx.org/licenses/GPL-2.0-only.html

Mechanical patch running:

$ sed -i -e s/GPL-2.0/GPL-2.0-only/ \
$(git grep -l 'SPDX-License-Identifier: GPL-2.0[ $]' \
| egrep -v '^linux-headers|^include/standard-headers')

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

show more ...

hw: Use device_class_set_legacy_reset() instead of opencoding

Use device_class_set_legacy_reset() instead of opencoding an
assignment to DeviceClass::reset. This change was produced
with:
spatch --

hw: Use device_class_set_legacy_reset() instead of opencoding

Use device_class_set_legacy_reset() instead of opencoding an
assignment to DeviceClass::reset. This change was produced
with:
spatch --macro-file scripts/cocci-macro-file.h \
--sp-file scripts/coccinelle/device-reset.cocci \
--keep-comments --smpl-spacing --in-place --dir hw

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240830145812.1967042-8-peter.maydell@linaro.org

show more ...

hw/m68k/mcf5208: Add URLs for datasheets

The datasheets for the SoC and board we model here are still
available from the NXP website; add their URLs and titles for
future reference.

Signed-off-by:

hw/m68k/mcf5208: Add URLs for datasheets

The datasheets for the SoC and board we model here are still
available from the NXP website; add their URLs and titles for
future reference.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20240830173452.2086140-3-peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>

show more ...

hw/m68k/mcf5208: Avoid shifting off end of integer

In m5208_sys_read(), we have a loop of n from 0 to 31, and we
calculate (2u << n). For the n == 31 iteration this will shift off
the top of the un

hw/m68k/mcf5208: Avoid shifting off end of integer

In m5208_sys_read(), we have a loop of n from 0 to 31, and we
calculate (2u << n). For the n == 31 iteration this will shift off
the top of the unsigned 32 bit integer.

This is harmless, because we're going to stop the loop with n == 31
anyway, but we can avoid the error by using 64-bit arithmetic here.

(The SDCS0 register is documented at
https://www.nxp.com/docs/en/reference-manual/MCF5208RM.pdf
section 18.4.5; we want the lower 5 bits to indicate the
RAM size, where 31 == 4GB, 30 == 2GB, and so on down.
As it happens, the layout of the mcf5208evb board memory map
means it doesn't make sense to have more than 1GB of RAM
in any case.)

Resolves: Coverity CID 1547727
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20240830173452.2086140-2-peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>

show more ...

hw: add compat machines for 9.2

Add 9.2 machine types for arm/i440fx/m68k/q35/s390x/spapr.

Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Rev

hw: add compat machines for 9.2

Add 9.2 machine types for arm/i440fx/m68k/q35/s390x/spapr.

Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240816161350.3706332-2-peter.maydell@linaro.org
Message-id: 20240816103723.2325982-1-cohuck@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw: skip registration of outdated versioned machine types

This calls the MACHINE_VER_DELETION() macro in the machine type
registration method, so that when a versioned machine type reaches
the end o

hw: skip registration of outdated versioned machine types

This calls the MACHINE_VER_DELETION() macro in the machine type
registration method, so that when a versioned machine type reaches
the end of its life, it is no longer registered with QOM and thus
cannot be used.

The actual definition of the machine type should be deleted at
this point, but experience shows that can easily be forgotten.
By skipping registration the manual code deletion task can be
done at any later date.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240620165742.1711389-12-berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

show more ...

hw: set deprecation info for all versioned machine types

This calls the MACHINE_VER_DEPRECATION() macro in the definition of
all machine type classes which support versioning. This ensures
that they

hw: set deprecation info for all versioned machine types

This calls the MACHINE_VER_DEPRECATION() macro in the definition of
all machine type classes which support versioning. This ensures
that they will automatically get deprecation info set when they
reach the appropriate point in their lifecycle.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240620165742.1711389-11-berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

show more ...

hw/m68k: convert 'virt' machine definitions to use new macros

This changes the DEFINE_VIRT_MACHINE macro to use the common
helpers for constructing versioned symbol names and strings,
bringing great

hw/m68k: convert 'virt' machine definitions to use new macros

This changes the DEFINE_VIRT_MACHINE macro to use the common
helpers for constructing versioned symbol names and strings,
bringing greater consistency across targets.

A DEFINE_VIRT_MACHINE_AS_LATEST helper is added so that it
is not required to pass 'false' for every single historical
machine type.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240620165742.1711389-6-berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

show more ...