hw/intc: Add NULL pointer check on LoongArch ipi device

When ipi mailbox is used, cpu_index is decoded from iocsr register.
cpu maybe does not exist. This patch adds NULL pointer check on
ipi device

hw/intc: Add NULL pointer check on LoongArch ipi device

When ipi mailbox is used, cpu_index is decoded from iocsr register.
cpu maybe does not exist. This patch adds NULL pointer check on
ipi device.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230512100421.1867848-4-gaosong@loongson.cn>

show more ...

Merge tag 'mips-20230113' of https://github.com/philmd/qemu into staging

MIPS patches queue

A bunch of cleanups from various people.

- Improved GT64120 on big-endian hosts
- GT64120 north bridge a

Merge tag 'mips-20230113' of https://github.com/philmd/qemu into staging

MIPS patches queue

A bunch of cleanups from various people.

- Improved GT64120 on big-endian hosts
- GT64120 north bridge and MC146818 RTC devices are now target independent
- Bonito64 north bridge converted to 3-phase reset API
- PCI refactors around PIIX devices
- Support for nanoMIPS in bootloader generator API
- New YAMON Malta Avocado test
- Removal of 'trap and emulate' KVM support
- System-specific QMP commands restricted to system emulation

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmPBekAACgkQ4+MsLN6t
# wN4wjxAAtYxyt6WUBpiYfV/LnbQFpAsacues1Vhy9MPYEg5a/iuXWKvWtgRYvGww
# qR0GVQH8rH7tgnCZK+ioq9jX+hvfBskP6CnKhxmb5zDGm7vP7jhhu8UFWY/EtBgq
# 0zpNeLMXtnRJ6PBqo/nWFCVtcpDRZ6IkSbpGWkVkciRFc5n/2VCnlIj8k2I1oMvL
# 11cp2xFQnaPReFXIpMjJHuHv1NObykdlvVg6wQo/A/4qIb8EvJQEPmePjG9Sf0i0
# v2dhnnxG9mze7+uq0dIC16x8Azko3N7dmtNlBU/aGb9OELwx35aux2M4dNDVogwn
# DqL/Wsk54TFewECOfS48t/a/TqV8j/ISW1d/JvovBrN2KovmIAbtqHuMUqKVk5l0
# 23ZOIIPIYwmScZwIlkCIGUuIzFig1zhEmQcoEQaFe/B0oLB2eN/x0Bk9Yklo+i2A
# WNiyiAj7k5492qEdndOySEEDVt6886F/+CdQ6QYF5Z1L/ELck7XHBH3mGDznWpPn
# 6IURyVquPJx7ul62jSGI+Gc+qakNoahIhPo5O7hklOM9GwWNOWXHveyb7xjs7j+O
# eWyVcet+o7hoHkCzmfbyTPySI4qCpF9fA42jqPhATwQPwmGXpbr+4BxUq3KtE43y
# w9tEigwd4voN3dWLItVh6QE4in70osz3XHp93byvo8bHlS0huVY=
# =oXX+
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 13 Jan 2023 15:35:28 GMT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE

* tag 'mips-20230113' of https://github.com/philmd/qemu: (46 commits)
scripts/git.orderfile: Display MAINTAINERS changes first
target/mips: Restrict 'qapi-commands-machine.h' to system emulation
hw/mips/boston: Rename MachineState 'mc' pointer to 'ms'
hw/pci-host/bonito: Declare TYPE_BONITO_PCI_HOST_BRIDGE in header
hw/pci-host/bonito: Use 'bonito_pci' for PCI function #0 code
hw/pci-host/bonito: Use 'bonito_host' for PCI host bridge code
hw/pci-host/bonito: Convert to 3-phase reset
softmmu/rtc: Emit warning when using driftfix=slew on systems without mc146818
hw/rtc/mc146818rtc: Make the mc146818 RTC device target independent
hw/core/qdev-properties-system: Allow the 'slew' policy only on x86
hw/intc: Extract the IRQ counting functions into a separate file
hw/intc/i8259: Make using the isa_pic singleton more type-safe
hw/usb/hcd-uhci: Introduce TYPE_ defines for device models
hw/mips/Kconfig: Track Malta's PIIX dependencies via Kconfig
hw/isa/piix4: Decouple INTx-to-LNKx routing which is board-specific
hw/isa/piix3: Decouple INTx-to-LNKx routing which is board-specific
hw/pci/pci: Factor out pci_bus_map_irqs() from pci_bus_irqs()
hw/pci/pci_host: Trace config accesses on unexisting functions
mips: Always include nanomips disassembler
mips: Remove support for trap and emulate KVM
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/intc: Extract the IRQ counting functions into a separate file

These IRQ counting functions will soon be required in binaries that
do not include the APIC code, too, so let's extract them into a
s

hw/intc: Extract the IRQ counting functions into a separate file

These IRQ counting functions will soon be required in binaries that
do not include the APIC code, too, so let's extract them into a
separate file that can be linked independently of the APIC code.

While we're at it, change the apic_* prefix into kvm_* since the
functions are used from the i8259 PIC (i.e. not the APIC), too.

Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20230110095351.611724-2-thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

show more ...

Merge tag 'pull-loongarch-20221104' of https://gitlab.com/gaosong/qemu into staging

pull-loongarch-20221104

v2:
- fix win32 build error;
- Add Rui Wang' patches.

# -----BEGIN PGP SIGNATURE-----

Merge tag 'pull-loongarch-20221104' of https://gitlab.com/gaosong/qemu into staging

pull-loongarch-20221104

v2:
- fix win32 build error;
- Add Rui Wang' patches.

# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEIAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCY2TZsAAKCRBAov/yOSY+
# 30kyA/9VEYvFQaXM9RP78OoiK0bANiByTCQMXCAuos1wXui/FwAcqE9YWXZStzH0
# MHdT2PyH680w9aKjhHuPbGs5xU911cQ94SPWzcTtM4HfEH+3N7RBfF0gS7MA+DLa
# 92vLqEIDC6SbAlY4/CRJVJmOl58d4uhEUUpq6eVzmJHcA3W5qw==
# =wblG
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 04 Nov 2022 05:21:52 EDT
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF

* tag 'pull-loongarch-20221104' of https://gitlab.com/gaosong/qemu:
target/loongarch: Fix emulation of float-point disable exception
target/loongarch: Adjust the layout of hardware flags bit fields
target/loongarch: Fix raise_mmu_exception() set wrong exception_index
target/loongarch: Add exception subcode
hw/loongarch: Add TPM device for LoongArch virt machine
hw/loongarch: Improve fdt for LoongArch virt machine
hw/loongarch: Load FDT table into dram memory space
hw/intc: Fix LoongArch extioi coreisr accessing
hw/intc: Convert the memops to with_attrs in LoongArch extioi

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

hw/intc: Convert the memops to with_attrs in LoongArch extioi

Converting the MemoryRegionOps read/write handlers to
with_attrs in LoongArch extioi emulation.

Signed-off-by: Xiaojuan Yang <yangxiaoj

hw/intc: Convert the memops to with_attrs in LoongArch extioi

Converting the MemoryRegionOps read/write handlers to
with_attrs in LoongArch extioi emulation.

Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221021015307.2570844-2-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>

show more ...

Merge tag 'pull-la-20220606' of https://gitlab.com/rth7680/qemu into staging

Initial LoongArch support.

# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmKeiRYdHHJpY

Merge tag 'pull-la-20220606' of https://gitlab.com/rth7680/qemu into staging

Initial LoongArch support.

# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmKeiRYdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV85Kgf/buBy5+0y51NKOpTI
# zwFzvuQoWyMwb1nz1ag3i0Sk5fk72zmQI13fwfCgyUZckT165qISa2hohnzl4zVZ
# CO0uZl44makET+uqJn5h2VXSM7Wf+jv0UzbCElVQuEFt0t1bIPbco0pTx/TojBb+
# +YKN4jobvJiLVhD1wDVJqp/2r9gcnX11EWZk+ZC+pIiEqYZpWRcQdEGVh4Ymhig8
# 0LK/8HRSyw0AecX/01hcGWvYCC0ldFicwN69AD42BqM+7WD+3jnV8FJL8qqq766G
# xuCNHz0eDcVgfw9bCEyhFmhgiBFvOXNCtyDOV0qVn7eee9nIrFZcsGyBqeI/T1el
# e7uz8Q==
# =l8TD
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 06 Jun 2022 04:09:10 PM PDT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]

* tag 'pull-la-20220606' of https://gitlab.com/rth7680/qemu: (43 commits)
target/loongarch: 'make check-tcg' support
tests/tcg/loongarch64: Add hello/memory test in loongarch64 system
target/loongarch: Add gdb support.
hw/loongarch: Add LoongArch virt power manager support.
hw/loongarch: Add LoongArch load elf function.
hw/loongarch: Add LoongArch ls7a rtc device support
hw/loongarch: Add some devices support for 3A5000.
Enable common virtio pci support for LoongArch
hw/loongarch: Add irq hierarchy for the system
hw/intc: Add LoongArch extioi interrupt controller(EIOINTC)
hw/intc: Add LoongArch ls7a msi interrupt controller support(PCH-MSI)
hw/intc: Add LoongArch ls7a interrupt controller support(PCH-PIC)
hw/loongarch: Add LoongArch ipi interrupt support(IPI)
hw/loongarch: Add support loongson3 virt machine type.
target/loongarch: Add timer related instructions support.
target/loongarch: Add other core instructions support
target/loongarch: Add TLB instruction support
target/loongarch: Add LoongArch IOCSR instruction
target/loongarch: Add LoongArch CSR instruction
target/loongarch: Add constant timer support
...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

hw/intc: Add LoongArch extioi interrupt controller(EIOINTC)

This patch realize the EIOINTC interrupt controller.

Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gao

hw/intc: Add LoongArch extioi interrupt controller(EIOINTC)

This patch realize the EIOINTC interrupt controller.

Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-35-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

hw/intc: Add LoongArch ls7a msi interrupt controller support(PCH-MSI)

This patch realize PCH-MSI interrupt controller.

Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Ga

hw/intc: Add LoongArch ls7a msi interrupt controller support(PCH-MSI)

This patch realize PCH-MSI interrupt controller.

Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-34-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

hw/intc: Add LoongArch ls7a interrupt controller support(PCH-PIC)

This patch realize the PCH-PIC interrupt controller.

Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Ga

hw/intc: Add LoongArch ls7a interrupt controller support(PCH-PIC)

This patch realize the PCH-PIC interrupt controller.

Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-33-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

hw/loongarch: Add LoongArch ipi interrupt support(IPI)

This patch realize the IPI interrupt controller.

Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loon

hw/loongarch: Add LoongArch ipi interrupt support(IPI)

This patch realize the IPI interrupt controller.

Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-32-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

Merge tag 'pull-target-arm-20220422-1' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* Implement GICv4 emulation
* Some cleanup patches in target/arm
* hw/arm/

Merge tag 'pull-target-arm-20220422-1' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* Implement GICv4 emulation
* Some cleanup patches in target/arm
* hw/arm/smmuv3: Pass the actual perm to returned IOMMUTLBEntry in smmuv3_translate()

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmJisasZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3vcdEACIcvC8E93tFfeKwDQHSdPx
# 7dPCdq+EZc/xEA2U/q282PFtvNBP6zo65RzWKXTkyfE5exLkCmqJqXSIUVfiuTyT
# IAx9mL++StpBJMiqAebzEp2n8gwG7JymFeGuHYGet/nRrcwQYacBNxSl+BIVqZAm
# mUy2UOlqJDlzMAVOcs/Ikfhj0z3qa52aZ8eF6sQI3mbSggiSIWOhyzNYo7jMB1x7
# UuHlYpvYDltKT7PveA5JSuBP9OmV5RrqqO4s5c22Y+o4k+La/NURDPdegblMfRA9
# MfWAEHqjA1WQaxh/Tb4Bex1u875mFMOXMZk3P910wSeqxMLhTCmjTA2g4p1KhfcA
# LQJ5G2IvSA7HN660NLhZAqL601/1tS7Qcl387TfcU7WCDbgmzv2RCvH6UACF2hVl
# CH4bC3lKvemT324aOBs/TCnvdu54qR6hkJZ57XSn59QHvrRvrREVdYNfQnl/g751
# GTp8aMcmvTkZ8I7k2t4Tx+CoFO38+rv7PupLN+Eq4k97ovXmAWxekizv8KYu5itY
# emg63kItorwCgRwkKP28RKWLS/7dEpoF8sg5jBiBtGBGNG0AWPq4GZdrhaL58cr4
# lr4nSseN2IRsrp3SgM2203RjdghFM8ey1Dq+x2mRp+Q21vVTltI/VSiUSz0c2Vpo
# JgbC4Jo+jufMkav31zOCAg==
# =jqHX
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 22 Apr 2022 06:46:19 AM PDT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]

* tag 'pull-target-arm-20220422-1' of https://git.linaro.org/people/pmaydell/qemu-arm: (61 commits)
hw/arm/smmuv3: Pass the actual perm to returned IOMMUTLBEntry in smmuv3_translate()
target/arm: Use tcg_constant_i32 in translate.h
target/arm: Use tcg_constant in translate-vfp.c
target/arm: Use smin/smax for do_sat_addsub_32
target/arm: Use tcg_constant in translate-neon.c
target/arm: Use tcg_constant in translate-m-nocp.c
target/arm: Simplify aa32 DISAS_WFI
target/arm: Simplify gen_sar
target/arm: Simplify GEN_SHIFT in translate.c
target/arm: Split out gen_rebuild_hflags
target/arm: Split out set_btype_raw
target/arm: Remove fpexc32_access
target/arm: Change CPUArchState.thumb to bool
target/arm: Change DisasContext.thumb to bool
target/arm: Extend store_cpu_offset to take field size
target/arm: Change CPUArchState.aarch64 to bool
target/arm: Change DisasContext.aarch64 to bool
target/arm: Update SCTLR bits to ARMv9.2
target/arm: Update SCR_EL3 bits to ARMv8.8
target/arm: Update ISAR fields for ARMv8.8
...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

hw/intc/arm_gicv3_cpuif: Support vLPIs

The CPU interface changes to support vLPIs are fairly minor:
in the parts of the code that currently look at the list registers
to determine the highest priori

hw/intc/arm_gicv3_cpuif: Support vLPIs

The CPU interface changes to support vLPIs are fairly minor:
in the parts of the code that currently look at the list registers
to determine the highest priority pending virtual interrupt, we
must also look at the highest priority pending vLPI. To do this
we change hppvi_index() to check the vLPI and return a special-case
value if that is the right virtual interrupt to take. The callsites
(which handle HPPIR and IAR registers and the "raise vIRQ and vFIQ
lines" code) then have to handle this special-case value.

This commit includes two interfaces with the as-yet-unwritten
redistributor code:
* the new GICv3CPUState::hppvlpi will be set by the redistributor
(in the same way as the existing hpplpi does for physical LPIs)
* when the CPU interface acknowledges a vLPI it needs to set it
to non-pending; the new gicv3_redist_vlpi_pending() function
(which matches the existing gicv3_redist_lpi_pending() used
for physical LPIs) is a stub that will be filled in later

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220408141550.1271295-26-peter.maydell@linaro.org

show more ...

hw/intc/arm_gicv3_cpuif: Split "update vIRQ/vFIQ" from gicv3_cpuif_virt_update()

The function gicv3_cpuif_virt_update() currently sets all of vIRQ,
vFIQ and the maintenance interrupt. This implies

hw/intc/arm_gicv3_cpuif: Split "update vIRQ/vFIQ" from gicv3_cpuif_virt_update()

The function gicv3_cpuif_virt_update() currently sets all of vIRQ,
vFIQ and the maintenance interrupt. This implies that it has to be
used quite carefully -- as the comment notes, setting the maintenance
interrupt will typically cause the GIC code to be re-entered
recursively. For handling vLPIs, we need the redistributor to be
able to tell the cpuif to update the vIRQ and vFIQ lines when the
highest priority pending vLPI changes. Since that change can't cause
the maintenance interrupt state to change, we can pull the "update
vIRQ/vFIQ" parts of gicv3_cpuif_virt_update() out into a separate
function, which the redistributor can then call without having to
worry about the reentrancy issue.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220408141550.1271295-25-peter.maydell@linaro.org

show more ...

hw/intc/arm_gicv3_its: Implement VINVALL

The VINVALL command should cause any cached information in the
ITS or redistributor for the specified vCPU to be dropped or
otherwise made consistent with th

hw/intc/arm_gicv3_its: Implement VINVALL

The VINVALL command should cause any cached information in the
ITS or redistributor for the specified vCPU to be dropped or
otherwise made consistent with the in-memory LPI configuration
tables.

Here we implement the command and table parsing, leaving the
redistributor part as a stub for the moment, as usual.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220408141550.1271295-22-peter.maydell@linaro.org

show more ...

hw/intc/arm_gicv3_its: Implement VMOVI

Implement the GICv4 VMOVI command, which moves the pending state
of a virtual interrupt from one redistributor to another. As with
MOVI, we handle the "parse a

hw/intc/arm_gicv3_its: Implement VMOVI

Implement the GICv4 VMOVI command, which moves the pending state
of a virtual interrupt from one redistributor to another. As with
MOVI, we handle the "parse and validate command arguments and
table lookups" part in the ITS source file, and pass the final
results to a function in the redistributor which will do the
actual operation. As with the "make a VLPI pending" change,
for the moment we leave that redistributor function as a stub,
to be implemented in a later commit.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220408141550.1271295-21-peter.maydell@linaro.org

show more ...

hw/intc/arm_gicv3_its: Implement INV command properly

We were previously implementing INV (like INVALL) to just blow away
cached highest-priority-pending-LPI information on all connected
redistribut

hw/intc/arm_gicv3_its: Implement INV command properly

We were previously implementing INV (like INVALL) to just blow away
cached highest-priority-pending-LPI information on all connected
redistributors. For GICv4.0, this isn't going to be sufficient,
because the LPI we are invalidating cached information for might be
either physical or virtual, and the required action is different for
those two cases. So we need to do the full process of looking up the
ITE from the devid and eventid. This also means we can do the error
checks that the spec lists for this command.

Split out INV handling into a process_inv() function like our other
command-processing functions. For the moment, stick to handling only
physical LPIs; we will add the vLPI parts later.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220408141550.1271295-19-peter.maydell@linaro.org

show more ...

hw/intc/arm_gicv3_its: Implement VSYNC

The VSYNC command forces the ITS to synchronize all outstanding ITS
operations for the specified vPEID, so that subsequent writes to
GITS_TRANSLATER honour the

hw/intc/arm_gicv3_its: Implement VSYNC

The VSYNC command forces the ITS to synchronize all outstanding ITS
operations for the specified vPEID, so that subsequent writes to
GITS_TRANSLATER honour them. The QEMU implementation is always in
sync, so for us this is a nop, like the existing SYNC command.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220408141550.1271295-18-peter.maydell@linaro.org

show more ...

hw/intc/arm_gicv3_its: Implement VMOVP

Implement the GICv4 VMOVP command, which updates an entry in the vPE
table to change its rdbase field. This command is unique in the ITS
command set because it

hw/intc/arm_gicv3_its: Implement VMOVP

Implement the GICv4 VMOVP command, which updates an entry in the vPE
table to change its rdbase field. This command is unique in the ITS
command set because its effects must be propagated to all the other
ITSes connected to the same GIC as the ITS which executes the VMOVP
command.

The GICv4 spec allows two implementation choices for handling the
propagation to other ITSes:
* If GITS_TYPER.VMOVP is 1, the guest only needs to issue the command
on one ITS, and the implementation handles the propagation to
all ITSes
* If GITS_TYPER.VMOVP is 0, the guest must issue the command on
every ITS, and arrange for the ITSes to synchronize the updates
with each other by setting ITSList and Sequence Number fields
in the command packets

We choose the GITS_TYPER.VMOVP = 1 approach, and synchronously
execute the update on every ITS.

For GICv4.1 this command has extra fields in the command packet and
additional behaviour. We define the 4.1-only fields with the FIELD
macro, but only implement the GICv4.0 version of the command.

Note that we don't update the reported GITS_TYPER value here;
we'll do that later in a commit which updates all the reported
feature bit and ID register values for GICv4.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220408141550.1271295-17-peter.maydell@linaro.org
[PMM: Moved gicv3_foreach_its() to arm_gicv3_its_common.h,
for consistency with gicv3_add_its()]

show more ...

hw/intc/arm_gicv3_its: Handle virtual interrupts in process_its_cmd()

For GICv4, interrupt table entries read by process_its_cmd() may
indicate virtual LPIs which are to be directly injected into a

hw/intc/arm_gicv3_its: Handle virtual interrupts in process_its_cmd()

For GICv4, interrupt table entries read by process_its_cmd() may
indicate virtual LPIs which are to be directly injected into a VM.
Implement the ITS side of the code for handling this. This is
similar to the existing handling of physical LPIs, but instead of
looking up a collection ID in a collection table, we look up a vPEID
in a vPE table. As with the physical LPIs, we leave the rest of the
work to code in the redistributor device.

The redistributor half will be implemented in a later commit;
for now we just provide a stub function which does nothing.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220408141550.1271295-15-peter.maydell@linaro.org

show more ...

hw/intc/arm_gicv3_its: Implement VMAPP

Implement the GICv4 VMAPP command, which writes an entry to the vPE
table.

For GICv4.1 this command has extra fields in the command packet
and additional beha

hw/intc/arm_gicv3_its: Implement VMAPP

Implement the GICv4 VMAPP command, which writes an entry to the vPE
table.

For GICv4.1 this command has extra fields in the command packet
and additional behaviour. We define the 4.1-only fields with the
FIELD macro, but only implement the GICv4.0 version of the command.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220408141550.1271295-10-peter.maydell@linaro.org

show more ...

hw/intc/arm_gicv3_its: Implement VMAPI and VMAPTI

Implement the GICv4 VMAPI and VMAPTI commands. These write
an interrupt translation table entry that maps (DeviceID,EventID)
to (vPEID,vINTID,doorbe

hw/intc/arm_gicv3_its: Implement VMAPI and VMAPTI

Implement the GICv4 VMAPI and VMAPTI commands. These write
an interrupt translation table entry that maps (DeviceID,EventID)
to (vPEID,vINTID,doorbell). The only difference between VMAPI
and VMAPTI is that VMAPI assumes vINTID == EventID rather than
both being specified in the command packet.

(This code won't be reachable until we allow the GIC version to be
set to 4. Support for reading this new virtual-interrupt DTE and
handling it correctly will be implemented in a later commit.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220408141550.1271295-9-peter.maydell@linaro.org

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20220307' into staging

target-arm queue:
* cleanups of qemu_oom_check() and qemu_memalign()
* target/arm/translate-neon: UNDEF i

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20220307' into staging

target-arm queue:
* cleanups of qemu_oom_check() and qemu_memalign()
* target/arm/translate-neon: UNDEF if VLD1/VST1 stride bits are non-zero
* target/arm/translate-neon: Simplify align field check for VLD3
* GICv3 ITS: add more trace events
* GICv3 ITS: implement 8-byte accesses properly
* GICv3: fix minor issues with some trace/log messages
* ui/cocoa: Use the standard about panel
* target/arm: Provide cpu property for controling FEAT_LPA2
* hw/arm/virt: Disable LPA2 for -machine virt-6.2

# gpg: Signature made Mon 07 Mar 2022 16:46:06 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20220307:
hw/arm/virt: Disable LPA2 for -machine virt-6.2
target/arm: Provide cpu property for controling FEAT_LPA2
ui/cocoa: Use the standard about panel
hw/intc/arm_gicv3_cpuif: Fix register names in ICV_HPPIR read trace event
hw/intc/arm_gicv3: Fix missing spaces in error log messages
hw/intc/arm_gicv3: Specify valid and impl in MemoryRegionOps
hw/intc/arm_gicv3_its: Add trace events for table reads and writes
hw/intc/arm_gicv3_its: Add trace events for commands
target/arm/translate-neon: Simplify align field check for VLD3
target/arm/translate-neon: UNDEF if VLD1/VST1 stride bits are non-zero
osdep: Move memalign-related functions to their own header
util: Put qemu_vfree() in memalign.c
util: Use meson checks for valloc() and memalign() presence
util: Share qemu_try_memalign() implementation between POSIX and Windows
meson.build: Don't misdetect posix_memalign() on Windows
util: Return valid allocation for qemu_try_memalign() with zero size
util: Unify implementations of qemu_memalign()
util: Make qemu_oom_check() a static function

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/intc/arm_gicv3_its: Add trace events for table reads and writes

For debugging guest use of the ITS, it can be helpful to trace
when the ITS reads and writes the in-memory tables.

Signed-off-by:

hw/intc/arm_gicv3_its: Add trace events for table reads and writes

For debugging guest use of the ITS, it can be helpful to trace
when the ITS reads and writes the in-memory tables.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220303202341.2232284-3-peter.maydell@linaro.org

show more ...

hw/intc/arm_gicv3_its: Add trace events for commands

When debugging code that's using the ITS, it's helpful to
see tracing of the ITS commands that the guest executes. Add
suitable trace events.

Si

hw/intc/arm_gicv3_its: Add trace events for commands

When debugging code that's using the ITS, it's helpful to
see tracing of the ITS commands that the guest executes. Add
suitable trace events.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220303202341.2232284-2-peter.maydell@linaro.org

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20220128' into staging

target-arm queue:
* Update copyright dates to 2022
* hw/armv7m: Fix broken VMStateDescription
* hw/char/

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20220128' into staging

target-arm queue:
* Update copyright dates to 2022
* hw/armv7m: Fix broken VMStateDescription
* hw/char/exynos4210_uart: Fix crash on trying to load VM state
* rtc: Move RTC function prototypes to their own header
* xlnx-versal-virt: Support PMC SLCR
* xlnx-versal-virt: Support OSPI flash memory controller
* scripts: Explain the difference between linux-headers and standard-headers
* target/arm: Log CPU index in 'Taking exception' log
* arm_gicv3_its: Various bugfixes and cleanups
* arm_gicv3_its: Implement the missing MOVI and MOVALL commands
* ast2600: Fix address mapping of second SPI controller
* target/arm: Use correct entrypoint for SVC taken from Hyp to Hyp

# gpg: Signature made Fri 28 Jan 2022 15:29:36 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20220128: (32 commits)
target/arm: Use correct entrypoint for SVC taken from Hyp to Hyp
hw/arm: ast2600: Fix address mapping of second SPI controller
hw/intc/arm_gicv3_its: Implement MOVI
hw/intc/arm_gicv3_its: Implement MOVALL
hw/intc/arm_gicv3_its: Check table bounds against correct limit
hw/intc/arm_gicv3_its: Make GITS_BASER<n> RAZ/WI for unimplemented registers
hw/intc/arm_gicv3_its: Provide read accessor for translation_ops
hw/intc/arm_gicv3: Set GICR_CTLR.CES if LPIs are supported
hw/intc/arm_gicv3_redist: Remove unnecessary zero checks
hw/intc/arm_gicv3_its: Sort ITS command list into numeric order
hw/intc/arm_gicv3: Honour GICD_CTLR.EnableGrp1NS for LPIs
hw/intc/arm_gicv3_its: Don't clear GITS_CWRITER on writes to GITS_CBASER
hw/intc/arm_gicv3_its: Don't clear GITS_CREADR when GITS_CTLR.ENABLED is set
hw/intc/arm_gicv3: Initialise dma_as in GIC, not ITS
hw/intc/arm_gicv3_its: Add tracepoints
target/arm: Log CPU index in 'Taking exception' log
scripts: Explain the difference between linux-headers and standard-headers
MAINTAINERS: Remove myself (for raspi).
MAINTAINERS: Add an entry for Xilinx Versal OSPI
hw/arm/xlnx-versal-virt: Connect mt35xu01g flashes to the OSPI
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...