bulk: Rename TARGET_FMT_plx -> HWADDR_FMT_plx

The 'hwaddr' type is defined in "exec/hwaddr.h" as:

hwaddr is the type of a physical address
(its size can be different from 'target_ulong').

A

bulk: Rename TARGET_FMT_plx -> HWADDR_FMT_plx

The 'hwaddr' type is defined in "exec/hwaddr.h" as:

hwaddr is the type of a physical address
(its size can be different from 'target_ulong').

All definitions use the 'HWADDR_' prefix, except TARGET_FMT_plx:

$ fgrep define include/exec/hwaddr.h
#define HWADDR_H
#define HWADDR_BITS 64
#define HWADDR_MAX UINT64_MAX
#define TARGET_FMT_plx "%016" PRIx64
^^^^^^
#define HWADDR_PRId PRId64
#define HWADDR_PRIi PRIi64
#define HWADDR_PRIo PRIo64
#define HWADDR_PRIu PRIu64
#define HWADDR_PRIx PRIx64
#define HWADDR_PRIX PRIX64

Since hwaddr's size can be *different* from target_ulong, it is
very confusing to read one of its format using the 'TARGET_FMT_'
prefix, normally used for the target_long / target_ulong types:

$ fgrep TARGET_FMT_ include/exec/cpu-defs.h
#define TARGET_FMT_lx "%08x"
#define TARGET_FMT_ld "%d"
#define TARGET_FMT_lu "%u"
#define TARGET_FMT_lx "%016" PRIx64
#define TARGET_FMT_ld "%" PRId64
#define TARGET_FMT_lu "%" PRIu64

Apparently this format was missed during commit a8170e5e97
("Rename target_phys_addr_t to hwaddr"), so complete it by
doing a bulk-rename with:

$ sed -i -e s/TARGET_FMT_plx/HWADDR_FMT_plx/g $(git grep -l TARGET_FMT_plx)

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230110212947.34557-1-philmd@linaro.org>
[thuth: Fix some warnings from checkpatch.pl along the way]
Signed-off-by: Thomas Huth <thuth@redhat.com>

show more ...

hw/i386/multiboot: Avoid dynamic stack allocation

Use autofree heap allocation instead of variable-length array on
the stack. Replace the snprintf() call by g_strdup_printf().

Signed-off-by: Philip

hw/i386/multiboot: Avoid dynamic stack allocation

Use autofree heap allocation instead of variable-length array on
the stack. Replace the snprintf() call by g_strdup_printf().

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220819153931.3147384-9-peter.maydell@linaro.org

show more ...

target/i386: use DMA-enabled multiboot ROM for new-enough QEMU machine types

As long as fw_cfg supports DMA, the new ROM can be used also on older
machine types because it has the same size as the e

target/i386: use DMA-enabled multiboot ROM for new-enough QEMU machine types

As long as fw_cfg supports DMA, the new ROM can be used also on older
machine types because it has the same size as the existing one.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-jan-29-2020' into staging

MIPS queue for January 29th, 2020

# gpg: Signature made Wed 29 Jan 2020 18:29:43 GMT
#

Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-jan-29-2020' into staging

MIPS queue for January 29th, 2020

# gpg: Signature made Wed 29 Jan 2020 18:29:43 GMT
# gpg: using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [full]
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65

* remotes/amarkovic/tags/mips-queue-jan-29-2020:
target/mips: Add implementation of GINVT instruction
target/mips: Amend CP0 WatchHi register implementation
hw/core/loader: Let load_elf() populate a field with CPU-specific flags
target/mips: semihosting: Remove 'uhi_done' label in helper_do_semihosting()
disas: Add a field for target-dependant data to disassemble_info
target/mips: Rectify documentation on deprecating MIPS r4k machine

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/core/loader: Let load_elf() populate a field with CPU-specific flags

While loading the executable, some platforms (like AVR) need to
detect CPU type that executable is built for - and

hw/core/loader: Let load_elf() populate a field with CPU-specific flags

While loading the executable, some platforms (like AVR) need to
detect CPU type that executable is built for - and, with this patch,
this is enabled by reading the field 'e_flags' of the ELF header of
the executable in question. The change expands functionality of
the following functions:

- load_elf()
- load_elf_as()
- load_elf_ram()
- load_elf_ram_sym()

The argument added to these functions is called 'pflags' and is of
type 'uint32_t*' (that matches 'pointer to 'elf_word'', 'elf_word'
being the type of the field 'e_flags', in both 32-bit and 64-bit
variants of ELF header). Callers are allowed to pass NULL as that
argument, and in such case no lookup to the field 'e_flags' will
happen, and no information will be returned, of course.

CC: Richard Henderson <rth@twiddle.net>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Edgar E. Iglesias <edgar.iglesias@gmail.com>
CC: Michael Walle <michael@walle.cc>
CC: Thomas Huth <huth@tuxfamily.org>
CC: Laurent Vivier <laurent@vivier.eu>
CC: Philippe Mathieu-Daudé <f4bug@amsat.org>
CC: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com>
CC: Aurelien Jarno <aurelien@aurel32.net>
CC: Jia Liu <proljc@gmail.com>
CC: David Gibson <david@gibson.dropbear.id.au>
CC: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: BALATON Zoltan <balaton@eik.bme.hu>
CC: Christian Borntraeger <borntraeger@de.ibm.com>
CC: Thomas Huth <thuth@redhat.com>
CC: Artyom Tarasenko <atar4qemu@gmail.com>
CC: Fabien Chouteau <chouteau@adacore.com>
CC: KONRAD Frederic <frederic.konrad@adacore.com>
CC: Max Filippov <jcmvbkbc@gmail.com>

Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com>
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1580079311-20447-24-git-send-email-aleksandar.markovic@rt-rk.com>

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20190816' into staging

target-arm queue:
* target/arm: generate a custom MIDR for -cpu max
* hw/misc/zynq_slcr:

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20190816' into staging

target-arm queue:
* target/arm: generate a custom MIDR for -cpu max
* hw/misc/zynq_slcr: refactor to use standard register definition
* Set ENET_BD_BDU in I.MX FEC controller
* target/arm: Fix routing of singlestep exceptions
* refactor a32/t32 decoder handling of PC
* minor optimisations/cleanups of some a32/t32 codegen
* target/arm/cpu64: Ensure kvm really supports aarch64=off
* target/arm/cpu: Ensure we can use the pmu with kvm
* target/arm: Minor cleanups preparatory to KVM SVE support

# gpg: Signature made Fri 16 Aug 2019 14:15:55 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20190816: (29 commits)
target/arm: Use tcg_gen_extrh_i64_i32 to extract the high word
target/arm: Simplify SMMLA, SMMLAR, SMMLS, SMMLSR
target/arm: Use tcg_gen_rotri_i32 for gen_swap_half
target/arm: Use ror32 instead of open-coding the operation
target/arm: Remove redundant shift tests
target/arm: Use tcg_gen_deposit_i32 for PKHBT, PKHTB
target/arm: Use tcg_gen_extract_i32 for shifter_out_im
target/arm/kvm64: Move the get/put of fpsimd registers out
target/arm/kvm64: Fix error returns
target/arm/cpu: Use div-round-up to determine predicate register array size
target/arm/helper: zcr: Add build bug next to value range assumption
target/arm/cpu: Ensure we can use the pmu with kvm
target/arm/cpu64: Ensure kvm really supports aarch64=off
target/arm: Remove helper_double_saturate
target/arm: Use unallocated_encoding for aarch32
target/arm: Remove offset argument to gen_exception_bkpt_insn
target/arm: Replace offset with pc in gen_exception_internal_insn
target/arm: Replace offset with pc in gen_exception_insn
target/arm: Replace s->pc with s->base.pc_next
target/arm: Remove redundant s->pc & ~1
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- file-posix: Fix O_DIRECT alignment detection
- Fixes for concurrent block jobs

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- file-posix: Fix O_DIRECT alignment detection
- Fixes for concurrent block jobs
- block-backend: Queue requests while drained (fix IDE vs. job crashes)
- qemu-img convert: Deprecate using -n and -o together
- iotests: Migration tests with filter nodes
- iotests: More media change tests

# gpg: Signature made Fri 16 Aug 2019 10:29:18 BST
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream:
file-posix: Handle undetectable alignment
qemu-img convert: Deprecate using -n and -o together
block-backend: Queue requests while drained
mirror: Keep mirror_top_bs drained after dropping permissions
block: Remove blk_pread_unthrottled()
iotests: Add test for concurrent stream/commit
tests: Test mid-drain bdrv_replace_child_noperm()
tests: Test polling in bdrv_drop_intermediate()
block: Reduce (un)drains when replacing a child
block: Keep subtree drained in drop_intermediate
block: Simplify bdrv_filter_default_perms()
iotests: Test migration with all kinds of filter nodes
iotests: Move migration helpers to iotests.py
iotests/118: Add -blockdev based tests
iotests/118: Create test classes dynamically
iotests/118: Test media change for scsi-cd

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2019-08-15' into staging

nbd patches for 2019-08-15

- Addition of InetSocketAddress keep-alive
- Addition of BDRV_REQ_P

Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2019-08-15' into staging

nbd patches for 2019-08-15

- Addition of InetSocketAddress keep-alive
- Addition of BDRV_REQ_PREFETCH for more efficient copy-on-read
- Initial refactoring in preparation of NBD reconnect

# gpg: Signature made Thu 15 Aug 2019 19:28:41 BST
# gpg: using RSA key A7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg: aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A

* remotes/ericb/tags/pull-nbd-2019-08-15:
block/nbd: refactor nbd connection parameters
block/nbd: add cmdline and qapi parameter reconnect-delay
block/nbd: move from quit to state
block/nbd: use non-blocking io channel for nbd negotiation
block/nbd: split connection_co start out of nbd_client_connect
nbd: improve CMD_CACHE: use BDRV_REQ_PREFETCH
block/stream: use BDRV_REQ_PREFETCH
block: implement BDRV_REQ_PREFETCH
qapi: Add InetSocketAddress member keep-alive

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/armbru/tags/pull-include-2019-08-13-v2' into staging

Header cleanup patches for 2019-08-13

# gpg: Signature made Fri 16 Aug 2019 12:39:12 BST

Merge remote-tracking branch 'remotes/armbru/tags/pull-include-2019-08-13-v2' into staging

Header cleanup patches for 2019-08-13

# gpg: Signature made Fri 16 Aug 2019 12:39:12 BST
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-include-2019-08-13-v2: (29 commits)
sysemu: Split sysemu/runstate.h off sysemu/sysemu.h
sysemu: Move the VMChangeStateEntry typedef to qemu/typedefs.h
Include sysemu/sysemu.h a lot less
Clean up inclusion of sysemu/sysemu.h
numa: Move remaining NUMA declarations from sysemu.h to numa.h
Include sysemu/hostmem.h less
numa: Don't include hw/boards.h into sysemu/numa.h
Include hw/boards.h a bit less
Include hw/qdev-properties.h less
Include qemu/main-loop.h less
Include qemu/queue.h slightly less
Include hw/hw.h exactly where needed
Include qom/object.h slightly less
Include exec/memory.h slightly less
Include migration/vmstate.h less
migration: Move the VMStateDescription typedef to typedefs.h
Clean up inclusion of exec/cpu-common.h
Include hw/irq.h a lot less
typedefs: Separate incomplete types and function types
ide: Include hw/ide/internal a bit less outside hw/ide/
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Include hw/hw.h exactly where needed

In my "build everything" tree, changing hw/hw.h triggers a recompile
of some 2600 out of 6600 objects (not counting tests and objects that
don't

Include hw/hw.h exactly where needed

In my "build everything" tree, changing hw/hw.h triggers a recompile
of some 2600 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).

The previous commits have left only the declaration of hw_error() in
hw/hw.h. This permits dropping most of its inclusions. Touching it
now recompiles less than 200 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-19-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/xtensa/tags/20190228-xtensa' into staging

target/xtensa: FLIX support, various fixes and test improvements

- add FLIX (flexible length instruct

Merge remote-tracking branch 'remotes/xtensa/tags/20190228-xtensa' into staging

target/xtensa: FLIX support, various fixes and test improvements

- add FLIX (flexible length instructions extension) support;
- make testsuite runnable on wider range of xtensa cores;
- add floating point opcode tests;
- don't add duplicate 'static' in import_core.sh script;
- fix undefined opcodes detection in test_mmuhifi_c3 overlay.

# gpg: Signature made Thu 28 Feb 2019 12:53:23 GMT
# gpg: using RSA key 2B67854B98E5327DCDEB17D851F9CC91F83FA044
# gpg: issuer "jcmvbkbc@gmail.com"
# gpg: Good signature from "Max Filippov <filippov@cadence.com>" [unknown]
# gpg: aka "Max Filippov <max.filippov@cogentembedded.com>" [full]
# gpg: aka "Max Filippov <jcmvbkbc@gmail.com>" [full]
# Primary key fingerprint: 2B67 854B 98E5 327D CDEB 17D8 51F9 CC91 F83F A044

* remotes/xtensa/tags/20190228-xtensa: (40 commits)
tests/tcg/xtensa: add FPU2000 coprocessor tests
tests/tcg/xtensa: add FP1 group tests
tests/tcg/xtensa: add FP0 group conversion tests
tests/tcg/xtensa: add FP0 group arithmetic tests
tests/tcg/xtensa: add LSCI/LSCX group tests
tests/tcg/xtensa: add test for FLIX
tests/tcg/xtensa: conditionalize MMU-related tests
tests/tcg/xtensa: conditionalize windowed register tests
tests/tcg/xtensa: conditionalize and fix s32c1i tests
tests/tcg/xtensa: fix SR tests for big endian configs
tests/tcg/xtensa: conditionalize and expand SR tests
tests/tcg/xtensa: conditionalize timer/CCOUNT tests
tests/tcg/xtensa: conditionalize interrupt tests
tests/tcg/xtensa: add straightforward conditionals
tests/tcg/xtensa: conditionalize cache option tests
tests/tcg/xtensa: conditionalize debug option tests
tests/tcg/xtensa: enable boolean tests
tests/tcg/xtensa: fix endianness issues in test_b
tests/tcg/xtensa: don't use optional opcodes in generic code
tests/tcg/xtensa: support configs with LITBASE
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-4.0-pull-request' into staging

- add new netlink type from linux v4.18 and v4.19
- fix coverity warning (CID 1390634)

Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-4.0-pull-request' into staging

- add new netlink type from linux v4.18 and v4.19
- fix coverity warning (CID 1390634)
- fix ioctl(SIOCGIFCONF) crash

# gpg: Signature made Thu 07 Feb 2019 13:12:53 GMT
# gpg: using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/linux-user-for-4.0-pull-request:
linux-user: add new netlink types
linux-user: Check sscanf return value in open_net_route()
Fix linux-user crashes in ioctl(SIOCGIFCONF) when ifc_buf is NULL.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/mcayland/tags/qemu-sparc-20190206' into staging

qemu-sparc queue

# gpg: Signature made Wed 06 Feb 2019 21:25:18 GMT
# gpg: u

Merge remote-tracking branch 'remotes/mcayland/tags/qemu-sparc-20190206' into staging

qemu-sparc queue

# gpg: Signature made Wed 06 Feb 2019 21:25:18 GMT
# gpg: using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F
# gpg: issuer "mark.cave-ayland@ilande.co.uk"
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [full]
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F

* remotes/mcayland/tags/qemu-sparc-20190206:
sun4m: pass initrd size to OpenBIOS via fw_cfg interface
sun4u: add power_mem_read routine
hw/sparc64: Create VGA device only if it has really been requested

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-patches-pull-request' into staging

Trivial patches:
* Update copyright
* Fix LGPL in target/moxie
* configure portabili

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-patches-pull-request' into staging

Trivial patches:
* Update copyright
* Fix LGPL in target/moxie
* configure portability fix
* Drop useless inclusion of "hw/i386/pc.h"
* Mark the cpu-cluster device with user_creatable = false
* tsc210x: Fix building with no verbosity

# gpg: Signature made Wed 06 Feb 2019 15:27:35 GMT
# gpg: using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-patches-pull-request:
hw/input/tsc210x: Fix building with no verbosity
hw/cpu/cluster: Mark the cpu-cluster device with user_creatable = false
hw/unicore32/puv3: Drop useless inclusion of "hw/i386/pc.h"
hw/sparc64/sun4u: Drop useless inclusion of "hw/i386/pc.h"
configure: Avoid non-portable 'test -o/-a'
target/moxie: Fix LGPL information in the file headers
qemu-common.h: Update copyright string for 2019

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/elmarco/tags/dump-pull-request' into staging

Pull request

# gpg: Signature made Wed 06 Feb 2019 14:57:54 GMT
# gpg: using RS

Merge remote-tracking branch 'remotes/elmarco/tags/dump-pull-request' into staging

Pull request

# gpg: Signature made Wed 06 Feb 2019 14:57:54 GMT
# gpg: using RSA key DAE8E10975969CE5
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5

* remotes/elmarco/tags/dump-pull-request:
dump: Set correct vaddr for ELF dump

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/rth/tags/pull-hppa-20190206' into staging

Queued target/hppa patches

# gpg: Signature made Wed 06 Feb 2019 10:50:06 GMT
# gpg:

Merge remote-tracking branch 'remotes/rth/tags/pull-hppa-20190206' into staging

Queued target/hppa patches

# gpg: Signature made Wed 06 Feb 2019 10:50:06 GMT
# gpg: using RSA key 64DF38E8AF7E215F
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F

* remotes/rth/tags/pull-hppa-20190206:
target/hppa: fix PSW Q bit behaviour to match hardware
target/hppa: fix setting registers via gdb
target/hppa: use tb_cflags() to access tb->cflags

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20190206' into staging

Queued accel/tcg patches

# gpg: Signature made Wed 06 Feb 2019 03:42:52 GMT
# gpg:

Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20190206' into staging

Queued accel/tcg patches

# gpg: Signature made Wed 06 Feb 2019 03:42:52 GMT
# gpg: using RSA key 64DF38E8AF7E215F
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F

* remotes/rth/tags/pull-tcg-20190206:
accel/tcg: Consider cluster index in tb_lookup__cpu_state()
tcg: add early clober modifier in atomic16_cmpxchg on aarch64

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* cpu-exec fixes (Emilio, Laurent)
* TCG bugfix in queue.h (Paolo)
* high address load for linuxboot (Zh

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* cpu-exec fixes (Emilio, Laurent)
* TCG bugfix in queue.h (Paolo)
* high address load for linuxboot (Zhijian)
* PVH support (Liam, Stefano)
* misc i386 changes (Paolo, Robert, Doug)
* configure tweak for openpty (Thomas)
* elf2dmp port to Windows (Viktor)
* initial improvements to Makefile infrastructure (Yang + GSoC 2013)

# gpg: Signature made Tue 05 Feb 2019 17:34:42 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (76 commits)
queue: fix QTAILQ_FOREACH_REVERSE_SAFE
scsi-generic: Convert from DPRINTF() macro to trace events
scsi-disk: Convert from DPRINTF() macro to trace events
pc: Use hotplug_handler_(plug|unplug|unplug_request)
i386: hvf: Fix smp boot hangs
hw/vfio/Makefile.objs: Create new CONFIG_* variables for VFIO core and PCI
hw/i2c/Makefile.objs: Create new CONFIG_* variables for EEPROM and ACPI controller
hw/tricore/Makefile.objs: Create CONFIG_* for tricore
hw/openrisc/Makefile.objs: Create CONFIG_* for openrisc
hw/moxie/Makefile.objs: Conditionally build moxie
hw/hppa/Makefile.objs: Create CONFIG_* for hppa
hw/cris/Makefile.objs: Create CONFIG_* for cris
hw/alpha/Makefile.objs: Create CONFIG_* for alpha
hw/sparc64/Makefile.objs: Create CONFIG_* for sparc64
hw/riscv/Makefile.objs: Create CONFIG_* for riscv boards
hw/nios2/Makefile.objs: Conditionally build nios2
hw/xtensa/Makefile.objs: Build xtensa_sim and xtensa_fpga conditionally
hw/lm32/Makefile.objs: Conditionally build lm32 and milkmyst
hw/sparc/Makefile.objs: CONFIG_* for sun4m and leon3 created
hw/s390/Makefile.objs: Create new CONFIG_* variables for s390x boards and devices
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
# qemu-deprecated.texi

show more ...

elf: Add optional function ptr to load_elf() to parse ELF notes

This patch adds an optional function pointer, 'elf_note_fn', to
load_elf() which causes load_elf() to additionally parse a

elf: Add optional function ptr to load_elf() to parse ELF notes

This patch adds an optional function pointer, 'elf_note_fn', to
load_elf() which causes load_elf() to additionally parse any
ELF program headers of type PT_NOTE and check to see if the ELF
Note is of the type specified by the 'translate_opaque' arg.
If a matching ELF Note is found then the specfied function pointer
is called to process the ELF note.

Passing a NULL function pointer results in ELF Notes being skipped.

The first consumer of this functionality is the PVHboot support
which needs to read the XEN_ELFNOTE_PHYS32_ENTRY ELF Note while
loading the uncompressed kernel binary in order to discover the
boot entry address for the x86/HVM direct boot ABI.

Signed-off-by: Liam Merwick <liam.merwick@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/xtensa/tags/20190122-xtensa' into staging

target/xtensa: zero overhead loops rework/helpers split

- change xtensa zero overhead loops implement

Merge remote-tracking branch 'remotes/xtensa/tags/20190122-xtensa' into staging

target/xtensa: zero overhead loops rework/helpers split

- change xtensa zero overhead loops implementation to avoid invalidation
of TBs corresponding to previous loop body when a new loop is
encountered;
- extract helper function groups from op_helper.c and move them into
separate source files: exc_helper.c (exception helpers), win_helper.c
(windowed registers helpers), fpu_helper.c (floating point helpers),
mmu_helper.c (memory management helpers) and dbg_helper.c (native debug
helpers).

# gpg: Signature made Tue 22 Jan 2019 18:44:17 GMT
# gpg: using RSA key 51F9CC91F83FA044
# gpg: Good signature from "Max Filippov <filippov@cadence.com>"
# gpg: aka "Max Filippov <max.filippov@cogentembedded.com>"
# gpg: aka "Max Filippov <jcmvbkbc@gmail.com>"
# Primary key fingerprint: 2B67 854B 98E5 327D CDEB 17D8 51F9 CC91 F83F A044

* remotes/xtensa/tags/20190122-xtensa:
target/xtensa: move non-HELPER functions to helper.c
target/xtensa: drop dump_state helper
target/xtensa: extract interrupt and exception helpers
target/xtensa: extract debug helpers
target/xtensa: extract MMU helpers
target/xtensa: extract windowed registers helpers
target/xtensa: extract FPU helpers
target/xtensa: rework zero overhead loops implementation

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20181216' into staging

- Remove retranslation remenents
- Return success from patch_reloc
- Preserve 32-bit values as zero-ext

Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20181216' into staging

- Remove retranslation remenents
- Return success from patch_reloc
- Preserve 32-bit values as zero-extended on x86_64
- Make bswap during memory ops as optional
- Cleanup xxhash
- Revert constant pooling for tcg/sparc/

# gpg: Signature made Mon 17 Dec 2018 03:25:21 GMT
# gpg: using RSA key 64DF38E8AF7E215F
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>"
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F

* remotes/rth/tags/pull-tcg-20181216: (33 commits)
xxhash: match output against the original xxhash32
include: move exec/tb-hash-xx.h to qemu/xxhash.h
exec: introduce qemu_xxhash{2,4,5,6,7}
qht-bench: document -p flag
tcg: Drop nargs from tcg_op_insert_{before,after}
tcg/mips: Improve the add2/sub2 command to use TCG_TARGET_REG_BITS
tcg: Add TCG_TARGET_HAS_MEMORY_BSWAP
tcg/optimize: Optimize bswap
tcg: Clean up generic bswap64
tcg: Clean up generic bswap32
tcg/i386: Add setup_guest_base_seg for FreeBSD
tcg/i386: Precompute all guest_base parameters
tcg/i386: Assume 32-bit values are zero-extended
tcg/i386: Implement INDEX_op_extr{lh}_i64_i32 for 32-bit guests
tcg/i386: Propagate is64 to tcg_out_qemu_ld_slow_path
tcg/i386: Propagate is64 to tcg_out_qemu_ld_direct
tcg/s390x: Return false on failure from patch_reloc
tcg/ppc: Return false on failure from patch_reloc
tcg/arm: Return false on failure from patch_reloc
tcg/aarch64: Return false on failure from patch_reloc
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-misc-20181214' into staging

miscellaneous patches:
* checkpatch.pl: Enforce multiline comment syntax
* Rename cpu_physical_

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-misc-20181214' into staging

miscellaneous patches:
* checkpatch.pl: Enforce multiline comment syntax
* Rename cpu_physical_memory_write_rom() to address_space_write_rom()
* disas, monitor, elf_ops: Use address_space_read() to read memory
* Remove load_image() in favour of load_image_size()
* Fix some minor memory leaks in arm boards/devices
* virt: fix broken indentation

# gpg: Signature made Fri 14 Dec 2018 14:41:20 GMT
# gpg: using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-misc-20181214: (22 commits)
virt: Fix broken indentation
target/arm: Create timers in realize, not init
tests/test-arm-mptimer: Don't leak string memory
hw/sd/sdhci: Don't leak memory region in sdhci_sysbus_realize()
hw/arm/mps2-tz.c: Free mscname string in make_dma()
target/arm: Free name string in ARMCPRegInfo hashtable entries
include/hw/loader.h: Document load_image_size()
hw/core/loader.c: Remove load_image()
device_tree.c: Don't use load_image()
hw/block/tc58128.c: Don't use load_image()
hw/i386/multiboot.c: Don't use load_image()
hw/i386/pc.c: Don't use load_image()
hw/pci/pci.c: Don't use load_image()
hw/smbios/smbios.c: Don't use load_image()
hw/ppc/ppc405_boards: Don't use load_image()
hw/ppc/mac_newworld, mac_oldworld: Don't use load_image()
elf_ops.h: Use address_space_write() to write memory
monitor: Use address_space_read() to read memory
disas.c: Use address_space_read() to read memory
Rename cpu_physical_memory_write_rom() to address_space_write_rom()
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/i386/multiboot.c: Don't use load_image()

The load_image() function is deprecated, as it does not let the
caller specify how large the buffer to read the file into is.
Instead use

hw/i386/multiboot.c: Don't use load_image()

The load_image() function is deprecated, as it does not let the
caller specify how large the buffer to read the file into is.
Instead use load_image_size().

While we are converting the code, add the missing error check.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20181130151712.2312-7-peter.maydell@linaro.org

show more ...

Merge remote-tracking branch 'remotes/otubo/tags/pull-seccomp-20180926' into staging

pull-seccomp-20180926

# gpg: Signature made Wed 26 Sep 2018 14:20:06 BST
# gpg:

Merge remote-tracking branch 'remotes/otubo/tags/pull-seccomp-20180926' into staging

pull-seccomp-20180926

# gpg: Signature made Wed 26 Sep 2018 14:20:06 BST
# gpg: using RSA key DF32E7C0F0FFF9A2
# gpg: Good signature from "Eduardo Otubo (Senior Software Engineer) <otubo@redhat.com>"
# Primary key fingerprint: D67E 1B50 9374 86B4 0723 DBAB DF32 E7C0 F0FF F9A2

* remotes/otubo/tags/pull-seccomp-20180926:
seccomp: check TSYNC host capability

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-3.1-pull-request' into staging

- some fixes for setrlimit() and write()
- fixes ELF loader when host page size is greate

Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-3.1-pull-request' into staging

- some fixes for setrlimit() and write()
- fixes ELF loader when host page size is greater than target page size
- add SO_LINGER to getsockopt()/setsockopt()
- move TargetFdTrans from syscall.c
v2: add "#include <linux/netlink.h>" in linux-user/fd-trans.c

# gpg: Signature made Tue 25 Sep 2018 21:51:13 BST
# gpg: using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg: aka "Laurent Vivier <laurent@vivier.eu>"
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/linux-user-for-3.1-pull-request:
linux-user: do setrlimit selectively
linux-user: write(fd, NULL, 0) parity with linux's treatment of same
linux-user: elf: mmap all the target-pages of hostpage for data segment
linux-user: add SO_LINGER to {g,s}etsockopt
linux-user: move TargetFdTrans functions to their own file

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...