hw/cxl: mailbox-utils: 0x5605 - FMAPI Initiate DC Release

FM DCD Management command 0x5605 implemented per CXL r3.2 Spec Section 7.6.7.6.6

Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: An

hw/cxl: mailbox-utils: 0x5605 - FMAPI Initiate DC Release

FM DCD Management command 0x5605 implemented per CXL r3.2 Spec Section 7.6.7.6.6

Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Anisa Su <anisa.su@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20250714174509.1984430-12-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

hw/cxl: mailbox-utils: 0x5604 - FMAPI Initiate DC Add

FM DCD Management command 0x5604 implemented per CXL r3.2 Spec Section 7.6.7.6.5

Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Anisa

hw/cxl: mailbox-utils: 0x5604 - FMAPI Initiate DC Add

FM DCD Management command 0x5604 implemented per CXL r3.2 Spec Section 7.6.7.6.5

Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Anisa Su <anisa.su@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20250714174509.1984430-11-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

hw/cxl: Create helper function to create DC Event Records from extents

Prepatory patch for following FMAPI Add/Release Patches. Refactors part
of qmp_cxl_process_dynamic_capacity_prescriptive() into

hw/cxl: Create helper function to create DC Event Records from extents

Prepatory patch for following FMAPI Add/Release Patches. Refactors part
of qmp_cxl_process_dynamic_capacity_prescriptive() into a helper
function to create DC Event Records and insert in the event log.

Moves definition for CXL_NUM_EXTENTS_SUPPORTED to cxl.h so it can be
accessed by cxl-mailbox-utils.c and cxl-events.c, where the helper
function is defined.

Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Anisa Su <anisa.su@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20250714174509.1984430-10-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

hw/cxl: mailbox-utils: 0x5603 - FMAPI Get DC Region Extent Lists

FM DCD Management command 0x5603 implemented per CXL r3.2 Spec Section 7.6.7.6.4
Very similar to previously implemented command 0x480

hw/cxl: mailbox-utils: 0x5603 - FMAPI Get DC Region Extent Lists

FM DCD Management command 0x5603 implemented per CXL r3.2 Spec Section 7.6.7.6.4
Very similar to previously implemented command 0x4801.

Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Anisa Su <anisa.su@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20250714174509.1984430-9-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

hw/cxl: mailbox-utils: 0x5602 - FMAPI Set DC Region Config

FM DCD Management command 0x5602 implemented per CXL r3.2 Spec Section 7.6.7.6.3

Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: A

hw/cxl: mailbox-utils: 0x5602 - FMAPI Set DC Region Config

FM DCD Management command 0x5602 implemented per CXL r3.2 Spec Section 7.6.7.6.3

Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Anisa Su <anisa.su@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20250714174509.1984430-8-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

hw/cxl: mailbox-utils: 0x5601 - FMAPI Get Host Region Config

FM DCD Management command 0x5601 implemented per CXL r3.2 Spec Section 7.6.7.6.2

Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by:

hw/cxl: mailbox-utils: 0x5601 - FMAPI Get Host Region Config

FM DCD Management command 0x5601 implemented per CXL r3.2 Spec Section 7.6.7.6.2

Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Anisa Su <anisa.su@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20250714174509.1984430-5-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

hw/cxl: mailbox-utils: 0x5600 - FMAPI Get DCD Info

FM DCD Management command 0x5600 implemented per CXL 3.2 Spec Section 7.6.7.6.1.

Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Anisa Su

hw/cxl: mailbox-utils: 0x5600 - FMAPI Get DCD Info

FM DCD Management command 0x5600 implemented per CXL 3.2 Spec Section 7.6.7.6.1.

Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Anisa Su <anisa.su@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20250714174509.1984430-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

hw/cxl: fix DC extent capacity tracking

Per cxl r3.2 Section 9.13.3.3, extent capacity tracking should include
extents in different states including added, pending, etc.

Before the change, for the

hw/cxl: fix DC extent capacity tracking

Per cxl r3.2 Section 9.13.3.3, extent capacity tracking should include
extents in different states including added, pending, etc.

Before the change, for the in-device extent number tracking purpose, we only
have "total_extent_count" defined, which only tracks the number of
extents accepted. However, we need to track number of extents in other
states also, for now it is extents pending-to-add.

To fix that, we introduce a new counter for dynamic capacity
"nr_extents_accepted" which explicitly tracks number of the extents
accepted by the hosts, and fix "total_extent_count" to include
both accepted and pending extents counting.

Signed-off-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20250714174509.1984430-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

qemu: Declare all load/store helper in 'qemu/bswap.h'

Restrict "exec/tswap.h" to the tswap*() methods,
move the load/store helpers with the other ones
declared in "qemu/bswap.h".

Signed-off-by: Phi

qemu: Declare all load/store helper in 'qemu/bswap.h'

Restrict "exec/tswap.h" to the tswap*() methods,
move the load/store helpers with the other ones
declared in "qemu/bswap.h".

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20250708215320.70426-8-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

hw/cxl: Make the CXL fixed memory windows devices.

Previously these somewhat device like structures were tracked using a list
in the CXLState in each machine. This is proving restrictive in a few
ca

hw/cxl: Make the CXL fixed memory windows devices.

Previously these somewhat device like structures were tracked using a list
in the CXLState in each machine. This is proving restrictive in a few
cases where we need to iterate through these without being aware of the
machine type. Just make them sysbus devices.

Restrict them to not user created as they need to be visible to early
stages of machine init given effects on the memory map.

This change both simplifies state tracking and enables features needed
for performance optimization and hotness tracking by making it possible
to retrieve the fixed memory window on actions elsewhere in the topology.

In some cases the ordering of the Fixed Memory Windows matters.
For those utility functions provide a GSList sorted by the window index.
This ensures that we get consistency across:
- ordering in the command line
- ordering of the host PA ranges
- ordering of ACPI CEDT structures describing the CFMWS.

Other aspects don't have this constraint. For those direct iteration
of the underlying hash structures is fine.

In the setup path for the memory map in pc_memory_init() split the
operations into two calls. The first, cxl_fmws_set_mmemap(), loops over
fixed memory windows in order and assigns their addresses. The second,
cxl_fmws_update_mmio() actually sets up the mmio for each window.
This is obviously less efficient than a single loop but this split design
is needed to put the logic in two different places in the arm64 support
and it is not a hot enough path to justify an x86 only implementation.

Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Tested-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Itaru Kitayama <itaru.kitayama@fujitsu.com>
Message-id: 20250703104110.992379-3-Jonathan.Cameron@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/cxl-host: Add an index field to CXLFixedMemoryWindow

To enable these to be found in a fixed order, that order needs to be known.
This will later be used to sort a list of these structures so that

hw/cxl-host: Add an index field to CXLFixedMemoryWindow

To enable these to be found in a fixed order, that order needs to be known.
This will later be used to sort a list of these structures so that address
map and ACPI table entries are predictable.

Tested-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Itaru Kitayama <itaru.kitayama@fujitsu.com>
Message-id: 20250703104110.992379-2-Jonathan.Cameron@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/cxl/cxl-mailbox-utils: CXL CCI Get/Set alert config commands

1) get alert configuration(Opcode 4201h)
2) set alert configuration(Opcode 4202h)

Signed-off-by: Sweta Kumari <s5.kumari@samsung.com>

hw/cxl/cxl-mailbox-utils: CXL CCI Get/Set alert config commands

1) get alert configuration(Opcode 4201h)
2) set alert configuration(Opcode 4202h)

Signed-off-by: Sweta Kumari <s5.kumari@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20250305092501.191929-7-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

hw/cxl/cxl-mailbox-utils: Media operations Sanitize and Write Zeros commands CXL r3.2(8.2.10.9.5.3)

CXL spec 3.2 section 8.2.10.9.5.3 describes media operations commands.
CXL devices supports media

hw/cxl/cxl-mailbox-utils: Media operations Sanitize and Write Zeros commands CXL r3.2(8.2.10.9.5.3)

CXL spec 3.2 section 8.2.10.9.5.3 describes media operations commands.
CXL devices supports media operations Sanitize and Write zero command.

Signed-off-by: Vinayak Holikatti <vinayak.kh@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20250305092501.191929-6-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

hw/cxl: factor out calculation of sanitize duration from cmd_santize_overwrite

Move the code of calculation of sanitize duration into function
for usability by other sanitize routines

Estimate time

hw/cxl: factor out calculation of sanitize duration from cmd_santize_overwrite

Move the code of calculation of sanitize duration into function
for usability by other sanitize routines

Estimate times based on:
https://pmem.io/documents/NVDIMM_DSM_Interface-V1.8.pdf

Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Vinayak Holikatti <vinayak.kh@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20250305092501.191929-5-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

hw/cxl/cxl-mailbox-utils: Add support for Media operations discovery commands cxl r3.2 (8.2.10.9.5.3)

CXL spec 3.2 section 8.2.10.9.5.3 describes media operations commands.
CXL devices supports medi

hw/cxl/cxl-mailbox-utils: Add support for Media operations discovery commands cxl r3.2 (8.2.10.9.5.3)

CXL spec 3.2 section 8.2.10.9.5.3 describes media operations commands.
CXL devices supports media operations discovery command.

Signed-off-by: Vinayak Holikatti <vinayak.kh@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20250305092501.191929-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

hw/cxl: Support get/set mctp response payload size

Add Get/Set Response Message Limit commands.

Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-of

hw/cxl: Support get/set mctp response payload size

Add Get/Set Response Message Limit commands.

Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20250305092501.191929-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

hw/cxl: Support aborting background commands

As of 3.1 spec, background commands can be canceled with a new
abort command. Implement the support, which is advertised in
the CEL. No ad-hoc context un

hw/cxl: Support aborting background commands

As of 3.1 spec, background commands can be canceled with a new
abort command. Implement the support, which is advertised in
the CEL. No ad-hoc context undoing is necessary as all the
command logic of the running bg command is done upon completion.
Arbitrarily, the on-going background cmd will not be aborted if
already at least 85% done;

A mutex is introduced to stabilize mbox request cancel command vs
the timer callback being fired scenarios (as well as reading the
mbox registers). While some operations under critical regions
may be unnecessary (irq notifying, cmd callbacks), this is not
a path where performance is important, so simplicity is preferred.

Tested-by: Ajay Joshi <ajay.opensrc@micron.com>
Reviewed-by: Ajay Joshi <ajay.opensrc@micron.com>
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20250305092501.191929-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

qom: Make InterfaceInfo[] uses const

Mechanical change using:

$ sed -i -E 's/\(InterfaceInfo.?\[/\(const InterfaceInfo\[/g' \
$(git grep -lE '\(InterfaceInfo.?\[\]\)')

Reviewed-by:

qom: Make InterfaceInfo[] uses const

Mechanical change using:

$ sed -i -E 's/\(InterfaceInfo.?\[/\(const InterfaceInfo\[/g' \
$(git grep -lE '\(InterfaceInfo.?\[\]\)')

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20250424194905.82506-7-philmd@linaro.org>

show more ...

qom: Have class_init() take a const data argument

Mechanical change using gsed, then style manually adapted
to pass checkpatch.pl script.

Suggested-by: Richard Henderson <richard.henderson@linaro.o

qom: Have class_init() take a const data argument

Mechanical change using gsed, then style manually adapted
to pass checkpatch.pl script.

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250424194905.82506-4-philmd@linaro.org>

show more ...