hw/arm: In STM32L4x5 SOC, connect USART devices to EXTI

The USART devices were previously connecting their outbound IRQs
directly to the CPU because the EXTI wasn't handling direct lines
interrupts.

hw/arm: In STM32L4x5 SOC, connect USART devices to EXTI

The USART devices were previously connecting their outbound IRQs
directly to the CPU because the EXTI wasn't handling direct lines
interrupts.
Now the USART connects to the EXTI inbound GPIOs, and the EXTI connects
its IRQs to the CPU.
The existing QTest for the USART (tests/qtest/stm32l4x5_usart-test.c)
checks that USART1_IRQ in the CPU is pending when expected so it
confirms that the connection through the EXTI still works.

Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240707085927.122867-4-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/arm : Pass STM32L4x5 SYSCFG gpios to STM32L4x5 SoC

Exposing SYSCFG inputs to the SoC is practical in order to wire the SoC
to the optional DM163 display from the board code (GPIOs outputs need
to

hw/arm : Pass STM32L4x5 SYSCFG gpios to STM32L4x5 SoC

Exposing SYSCFG inputs to the SoC is practical in order to wire the SoC
to the optional DM163 display from the board code (GPIOs outputs need
to be connected to both SYSCFG inputs and DM163 inputs).

STM32L4x5 SYSCFG in-irq interception needed to be changed accordingly.

Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240424200929.240921-3-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/arm: Add the USART to the stm32l4x5 SoC

Add the USART to the SoC and connect it to the other implemented devices.

Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inè

hw/arm: Add the USART to the stm32l4x5 SoC

Add the USART to the SoC and connect it to the other implemented devices.

Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240329174402.60382-5-arnaud.minier@telecom-paris.fr
[PMM: fixed a few checkpatch nits]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/arm: Connect STM32L4x5 GPIO to STM32L4x5 SoC

Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Philippe Mathieu-

hw/arm: Connect STM32L4x5 GPIO to STM32L4x5 SoC

Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20240305210444.310665-3-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/arm/stm32l4x5_soc.c: Use the RCC Sysclk

Now that we can generate reliable clock frequencies from the RCC, remove
the hacky definition of the sysclk in the b_l475e_iot01a initialisation
code and u

hw/arm/stm32l4x5_soc.c: Use the RCC Sysclk

Now that we can generate reliable clock frequencies from the RCC, remove
the hacky definition of the sysclk in the b_l475e_iot01a initialisation
code and use the correct RCC clock.

Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240303140643.81957-8-arnaud.minier@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/misc/stm32l4x5_rcc: Implement STM32L4x5_RCC skeleton

Add the necessary files to add a simple RCC implementation with just
reads from and writes to registers. Also instantiate the RCC in the
STM32

hw/misc/stm32l4x5_rcc: Implement STM32L4x5_RCC skeleton

Add the necessary files to add a simple RCC implementation with just
reads from and writes to registers. Also instantiate the RCC in the
STM32L4x5_SoC. It is needed for accurate emulation of all the SoC
clocks and timers.

Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240303140643.81957-2-arnaud.minier@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/arm: Use TYPE_OR_IRQ when connecting STM32L4x5 EXTI fan-in IRQs

Fixes: 52671f69f7a4 ("[PATCH v8 0/3] Add device STM32L4x5 EXTI")
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-

hw/arm: Use TYPE_OR_IRQ when connecting STM32L4x5 EXTI fan-in IRQs

Fixes: 52671f69f7a4 ("[PATCH v8 0/3] Add device STM32L4x5 EXTI")
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240220184145.106107-2-ines.varhol@telecom-paris.fr
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/arm: Connect STM32L4x5 SYSCFG to STM32L4x5 SoC

The SYSCFG input GPIOs aren't connected yet. When the STM32L4x5 GPIO
device will be implemented, its output GPIOs will be connected to the
SYSCFG in

hw/arm: Connect STM32L4x5 SYSCFG to STM32L4x5 SoC

The SYSCFG input GPIOs aren't connected yet. When the STM32L4x5 GPIO
device will be implemented, its output GPIOs will be connected to the
SYSCFG input GPIOs.

Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20240109194438.70934-3-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/arm: Connect STM32L4x5 EXTI to STM32L4x5 SoC

Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.

hw/arm: Connect STM32L4x5 EXTI to STM32L4x5 SoC

Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240109160658.311932-3-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/arm/socs: configure priority bits for existing SOCs

Update the number of priority bits for a number of existing
SoCs according to their technical documentation:

- STM32F100/F205/F405/L4x5: 4 bit

hw/arm/socs: configure priority bits for existing SOCs

Update the number of priority bits for a number of existing
SoCs according to their technical documentation:

- STM32F100/F205/F405/L4x5: 4 bits
- Stellaris (Sandstorm/Fury): 3 bits

Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240106181503.1746200-4-sam@rfc1149.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/arm: Add minimal support for the STM32L4x5 SoC

This patch adds a new STM32L4x5 SoC, it is necessary to add support for
the B-L475E-IOT01A board.
The implementation is derived from the STM32F405 S

hw/arm: Add minimal support for the STM32L4x5 SoC

This patch adds a new STM32L4x5 SoC, it is necessary to add support for
the B-L475E-IOT01A board.
The implementation is derived from the STM32F405 SoC.
The implementation contains no peripherals, only memory regions are
implemented.

Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240108135849.351719-2-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...