hw/misc/aspeed_i3c: Move to i3c directory

Moves the Aspeed I3C model and traces into hw/i3c and create I3C build
files.

Signed-off-by: Joe Komlodi <komlodi@google.com>

Reviewed-by: Patrick Venture

hw/misc/aspeed_i3c: Move to i3c directory

Moves the Aspeed I3C model and traces into hw/i3c and create I3C build
files.

Signed-off-by: Joe Komlodi <komlodi@google.com>

Reviewed-by: Patrick Venture <venture@google.com>
Reviewed-by: Titus Rwantare <titusr@google.com>
[ clg: - replaced softmmu_ss with system_ss in meson.build files
- local variable renames in aspeed_i3c_realize() ]

show more ...

Merge tag 'pull-target-arm-20241015-1' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* hw/arm/omap1: Remove unused omap_uwire_attach() method
* stm32f405: Add R

Merge tag 'pull-target-arm-20241015-1' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* hw/arm/omap1: Remove unused omap_uwire_attach() method
* stm32f405: Add RCC device to stm32f405 SoC
* arm/gicv3: add missing casts
* hw/misc: Create STM32L4x5 SYSCFG clock
* hw/arm: Add SPI to Allwinner A10
* hw/intc/omap_intc: Remove now-unnecessary abstract base class
* hw/char/pl011: Use correct masks for IBRD and FBRD
* docs/devel: Convert txt files to rST
* Remove MAX111X, MAX7310, DSCM-1XXXX, pcmcia devices (used only
by now-removed omap/pxa2xx boards)
* vl.c: Remove pxa2xx-specific -portrait and -rotate options
* dma: Fix function names in documentation
* hw/arm/xilinx_zynq: Add various missing unimplemented devices

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmcOeWEZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3jCMD/482mpT1s+mrEJFWSJJXU4G
# 8kr4Zj6+NafbayJ0vHTkpSbkEbPxuvDiUqmlnbI+3o11i+Z3IyiaGZbba7dyNnKl
# 02MdQavL0dB+eMrcFNofRRvwvsposuj2ixgwTQe6L32HSFdHerVVwuhHM/wfwyCh
# DKt7gPRovD/7CtwDOSpyW7cK64WK1IUlE8VEsbFdQbCPkopm55LQ2sLT4TshadpG
# A6xcxyLN0x/lHgCmvijB1T09LSc1nQpUEQNIokC4f1Rmy6HNgGDYY1G7GAJf99mT
# nWhATuuhZThiYfRbN5KQoS9tGEUduxtkGhHiOgpdXpgc3cS7RusCHoqAnibpsVh3
# TgAkaRAX1d/jQ2KYR2h2jI3nh66ObhrFRT3dkzRZrIvmK9zeWUKmS9lzZ94aVfPH
# +MtBPwsO5OhzEABs8WpMY9V1nYaYDsFATMc1akUSaSLn1Er9Uz66NIk+J4Lob4P0
# 78IPvTmwvAIITiqQvkISsc37n5a2/toeaffU2hPKtQLlhyilWynEZA5YItrXSTuk
# gYIBxyZSbzGj/ofZ9T9C0GDLbhJp9ksNIpIqRUiHOH3z9b85r7HVZORp+COw/ZXR
# UGak6rpJ+XVOxVL/cPRTvZB0RbUHIZh7WLNH2G7Tfv4E4llqL81iuImHXVh/2CXO
# 9GWr9qbDLDYQ+BI7ipLAYg==
# =n2CA
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 15 Oct 2024 15:17:05 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* tag 'pull-target-arm-20241015-1' of https://git.linaro.org/people/pmaydell/qemu-arm: (28 commits)
hw/arm/xilinx_zynq: Add various missing unimplemented devices
dma: Fix function names in documentation
vl.c: Remove pxa2xx-specific -portrait and -rotate options
hw/block: Remove ecc
hw: Remove PCMCIA subsystem
hw/ide: Remove DSCM-1XXXX microdrive device model
hw/gpio: Remove MAX7310 device
hw/adc: Remove MAX111X device
docs/devel/lockcnt: Include kernel-doc API documentation
include: Move QemuLockCnt APIs to their own header
docs/devel/rcu: Convert to rST format
docs/devel/multiple-iothreads: Convert to rST format
docs/devel/lockcnt: Convert to rST format
docs/devel/blkverify: Convert to rST format
docs/devel/blkdebug: Convert to rST format
hw/char/pl011: Use correct masks for IBRD and FBRD
hw/intc/omap_intc: Remove now-unnecessary abstract base class
hw/arm: Add SPI to Allwinner A10
hw/ssi: Allwinner A10 SPI emulation
tests/qtest: Check STM32L4x5 clock connections
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw: Remove PCMCIA subsystem

The only PCMCIA subsystem was the PXA2xx SoC and the machines
using it, which have now been removed. Although in theory
we have a few machine types which have PCMCIA (e.g

hw: Remove PCMCIA subsystem

The only PCMCIA subsystem was the PXA2xx SoC and the machines
using it, which have now been removed. Although in theory
we have a few machine types which have PCMCIA (e.g. kzm,
the strongarm machines, sh4's sh7750), none of those machines
implement their PCMCIA controller, and they're all old and
no longer very interesting machine types.

Rather than keeping all the PCMCIA code in-tree without any
active users of it, delete it. If we need PCMCIA in future
we can always resurrect it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241003140010.1653808-5-peter.maydell@linaro.org

show more ...

Merge tag 'hw-misc-20240913' of https://github.com/philmd/qemu into staging

Misc HW & UI patches

- Remove deprecated SH4 SHIX machine TC58128 NAND EEPROM (Phil)
- Remove deprecated CRIS target (Phi

Merge tag 'hw-misc-20240913' of https://github.com/philmd/qemu into staging

Misc HW & UI patches

- Remove deprecated SH4 SHIX machine TC58128 NAND EEPROM (Phil)
- Remove deprecated CRIS target (Phil)
- Remove deprecated RISC-V 'any' CPU type (Phil)
- Add fifo8_peek_buf() to correctly handle FIFO wraparound (Mark)
- Minor cleanups in Designware PCIe, PL011 and loongson IPI models (Phil)
- Fixes in TI TMP105 temperature (Guenter)
- Convert Sun ESCC and ADB mouses to QemuInputHandler (Mark)
- Prevent heap overflow in VIRTIO sound device (Volker)
- Cleanups around g_assert_not_reached() call (Pierrick)
- Add Clément as VT-d reviewer (Clément)
- Prevent stuck modifier keys and unexpected text input on Windows (Volker)
- Explicitly set SDL2 swap interval when OpenGL is enabled (Gert)

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmbkoOUACgkQ4+MsLN6t
# wN56SBAA1nYl5YTI0BwvToKysoNIJ5aTgDEbT87XYTatKYyWYlN5W1yrAeMcuwFO
# Rw8edtn2YY89ZMG/LPcY1h6+nI2qVMpuOzNP3ve4D+eM6AMUMX0bzeqXndUind7c
# 1kTcV7Wctfk34zzs5B9GIU0WswSSbL3FeETS47ySNg6J7GbVWIu41dh52oeg8XWa
# Zfw0FZDt7hSAbsUckBIC9/Nbh0hucxBnQevQLkVb6u8O0yX3wV2OZRIC7+NkvHkH
# ZLPT8lg197PitH0NouUJI5oMv5Ty3PXGHtrIAKvts+fGBpWL+XzEtQmT8RzqgxTl
# 9Z6C/PvfMHNtA7BE66D4iLOKBPpV0RCUDOAGsfcWy5GuklzeUy03DxZ/2xO8XERm
# TP0EP0nt2YddnELX7H65b78gJkPvnhME/MtA6Y6R7uxAA8gawZVWZQ1oDGUBNGDI
# zJ62Cu4nYPwpGiewwb+ZTkjeiaYddJsPNsE8f8d4XZCpTwpIM/oYzJapxedBwjrg
# a4eAWiy7xIvvGPxWN7IQPosGYcyO6zhbI+iAbxp1xmWsX0TPgLUcJtK9+pklqWS7
# 9ucrvkq5XRZSJMaGF0LZuZH7Qx6us7m0rik5wG96d8qrIXRpi8kXfWxI17SWQkGa
# cG91u+FrKmfBr+yD7Q1gVbaYzkD+X1hPkQmSVmnlNS+5axrnSYQ=
# =sPwb
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 13 Sep 2024 21:30:29 BST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE

* tag 'hw-misc-20240913' of https://github.com/philmd/qemu: (60 commits)
ui: remove break after g_assert_not_reached()
ui/sdl2: set swap interval explicitly when OpenGL is enabled
ui/sdl2: ignore GUI keys in SDL_TEXTINPUT handler
ui/sdl2: release all modifiers
system: replace assert(0) with g_assert_not_reached()
hw/pci-host: remove break after g_assert_not_reached()
hw/misc: remove break after g_assert_not_reached()
hw/gpio: remove break after g_assert_not_reached()
hw/watchdog: replace assert(0) with g_assert_not_reached()
hw/core: replace assert(0) with g_assert_not_reached()
hw/char: replace assert(0) with g_assert_not_reached()
hw/input/adb-mouse: convert to use QemuInputHandler
hw/char/escc: convert Sun mouse to use QemuInputHandler
hw/sensor/tmp105: Lower 4 bit of limit registers are always 0
hw/sensor/tmp105: OS (one-shot) bit in config register always returns 0
hw/sensor/tmp105: Pass 'oneshot' argument to tmp105_alarm_update()
hw/sensor/tmp105: Use registerfields API
hw/sensor/tmp105: Coding style fixes
tests/unit: Comment FIFO8 tests
tests/unit: Expand test_fifo8_peek_buf_wrap() coverage
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/timer: Remove TYPE_ETRAX_FS_TIMER device

We just removed the single machine using it (axis-dev88).

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redha

hw/timer: Remove TYPE_ETRAX_FS_TIMER device

We just removed the single machine using it (axis-dev88).

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-ID: <20240904143603.52934-12-philmd@linaro.org>

show more ...

Merge tag 'hw-misc-20240425' of https://github.com/philmd/qemu into staging

Misc HW patch queue

- Script to compare machines compat_props[] (Maksim)
- Introduce 'module' CPU topology level (Zhao)
-

Merge tag 'hw-misc-20240425' of https://github.com/philmd/qemu into staging

Misc HW patch queue

- Script to compare machines compat_props[] (Maksim)
- Introduce 'module' CPU topology level (Zhao)
- Various cleanups (Thomas, Zhao, Inès, Bernhard)

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmYqN3wACgkQ4+MsLN6t
# wN4hTw/9FHsItnEkme/864DRPSP7A9mCGa+JfzJmsL8oUb9fBjXXKm+lNchMLu3B
# uvzfXB2Ea24yf5vyrldo0XlU3i/4GDvqXTI6YFYqBvitGICauYBu+6n2NZh2Y/Pn
# zZCcVo167o0q7dHu2WSrZ6cSUchsF2C80HjuS07QaN2YZ7QMuN1+uqTjCQ/JHQWA
# MH4xHh7cXdfCbbv8iNhMWn6sa+Bw/UyfRcc2W6w9cF5Q5cuuTshgDyd0JBOzkM1i
# Mcul7TuKrSiLUeeeqfTjwtw3rtbNfkelV3ycgvgECFAlzPSjF5a6d/EGdO2zo3T/
# aFZnQBYrb4U0SzsmfXFHW7cSylIc1Jn2CCuZZBIvdVcu8TGDD5XsgZbGoCfKdWxp
# l67qbQJy1Mp3LrRzygJIaxDOfE8fhhRrcIxfK/GoTHaCkqeFRkGjTeiDTVBqAES2
# zs6kUYZyG/xGaa2tsMu+HbtSO5EEqPC2QCdHayY3deW42Kwjj/HFV50Ya8YgYSVp
# gEAjTDOle2dDjlkYud+ymTJz7LnGb3G7q0EZRI9DWolx/bu+uZGQqTSRRre4qFQY
# SgN576hsFGN4NdM7tyJWiiqD/OC9ZeqUx3gGBtmI52Q6obBCE9hcow0fPs55Tk95
# 1YzPrt/3IoPI5ZptCoA8DFiysQ46OLtpIsQO9YcrpJmxWyLDSr0=
# =tm+U
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 25 Apr 2024 03:59:08 AM PDT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]

* tag 'hw-misc-20240425' of https://github.com/philmd/qemu: (22 commits)
hw/core: Support module-id in numa configuration
hw/core: Introduce module-id as the topology subindex
hw/core/machine: Support modules in -smp
hw/core/machine: Introduce the module as a CPU topology level
hw/i386/pc_sysfw: Remove unused parameter from pc_isa_bios_init()
hw/misc : Correct 5 spaces indents in stm32l4x5_exti
hw/xtensa: Include missing 'exec/cpu-common.h' in 'bootparam.h'
hw/elf_ops: Rename elf_ops.h -> elf_ops.h.inc
hw/cxl/cxl-cdat: Make cxl_doe_cdat_init() return boolean
hw/cxl/cxl-cdat: Make ct3_build_cdat() return boolean
hw/cxl/cxl-cdat: Make ct3_load_cdat() return boolean
hw: Add a Kconfig switch for the TYPE_CPU_CLUSTER device
hw: Fix problem with the A*MPCORE switches in the Kconfig files
hw/riscv/virt: Replace sprintf by g_strdup_printf
hw/misc/imx: Replace sprintf() by snprintf()
hw/misc/applesmc: Simplify DeviceReset handler
target/i386: Move APIC related code to cpu-apic.c
hw/core: Remove check on NEED_CPU_H in tcg-cpu-ops.h
scripts: add script to compare compatibility properties
python/qemu/machine: add method to retrieve QEMUMachine::binary field
...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

hw: Fix problem with the A*MPCORE switches in the Kconfig files

A9MPCORE, ARM11MPCORE and A15MPCORE are defined twice, once in
hw/cpu/Kconfig and once in hw/arm/Kconfig. This is only possible
by acc

hw: Fix problem with the A*MPCORE switches in the Kconfig files

A9MPCORE, ARM11MPCORE and A15MPCORE are defined twice, once in
hw/cpu/Kconfig and once in hw/arm/Kconfig. This is only possible
by accident, since hw/cpu/Kconfig is never included from hw/Kconfig.
Fix it by declaring the switches only in hw/cpu/Kconfig (since the
related files reside in the hw/cpu/ folder) and by making sure that
the file hw/cpu/Kconfig is now properly included from hw/Kconfig.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240415065655.130099-2-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

show more ...

Merge tag 'housekeeping-20240424' of https://github.com/philmd/qemu into staging

Removal of deprecated code

- Remove the Nios II target and hardware
- Remove pvrdma device and rdmacm-mux helper
- R

Merge tag 'housekeeping-20240424' of https://github.com/philmd/qemu into staging

Removal of deprecated code

- Remove the Nios II target and hardware
- Remove pvrdma device and rdmacm-mux helper
- Remove GlusterFS RDMA protocol handling
- Update Sriram Yagnaraman mail address

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmYpE0YACgkQ4+MsLN6t
# wN5PIA//egomANjRHAUAf9tdjljgT/JR49ejM7iInyxspR/xaiq0TlP2kP6aDNps
# y1HAWBwfj5lGxeMgQ1mSKJGka3v2AIPWb7RbNT+9AaiWHv+sx5OrEytozUsFHLo8
# gSgRQocq0NY2a9dPbtkDqfbmq/rkCC7wgZzwroHsyOdiqYsWDKPJFleBDMjGmEaf
# colhiDmhUPgvE3NNpwfEVNh/2SzxUxY8k5FHal6qij5z56ZqBglgnziDZEvGVCZ1
# uF4Hca/kh7TV2MVsdStPbGWZYDhJ/Np/2FnRoThD1Hc4qq8d/SH997m2F94tSOud
# YeH54Vp5lmCeYgba5y8VP0ZPx/b9XnTtLvKggNdoqB+T2LBWPRt8kehqoaxvammF
# ALzbY/t2vUxL6nIVbosOaTyqVOXvynk3/Js5S0jbnlu+vP2WvvFEzfYKIs2DIA8w
# z56o/rG4KfyxF0aDB+CvLNwtJS8THqeivPqmYoKTdN9FPpN2RyBNLITrKo389ygF
# 3oWy3+xsKGIPdNFY0a4l25xntqWNhND89ejzyL9M6G1cQ9RdEmTIUGTrinPQQmfP
# oHIJMBeTdj7EqPL4LB3BR/htw9U5PobeMNYKFsRkS39PjGDqba5wbIdk3w5/Rcxa
# s/PKdspDKWPwZ5jhcLD0qxAGJFnqM2UFjPo+U8qyI3RXKXFAn0E=
# =c8Aj
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 24 Apr 2024 07:12:22 AM PDT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]

* tag 'housekeeping-20240424' of https://github.com/philmd/qemu:
block/gluster: Remove deprecated RDMA protocol handling
hw/rdma: Remove deprecated pvrdma device and rdmacm-mux helper
hw/timer: Remove the ALTERA_TIMER model
target/nios2: Remove the deprecated Nios II target
MAINTAINERS: Update Sriram Yagnaraman mail address

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

hw/rdma: Remove deprecated pvrdma device and rdmacm-mux helper

The whole RDMA subsystem was deprecated in commit e9a54265f5
("hw/rdma: Deprecate the pvrdma device and the rdma subsystem")
released i

hw/rdma: Remove deprecated pvrdma device and rdmacm-mux helper

The whole RDMA subsystem was deprecated in commit e9a54265f5
("hw/rdma: Deprecate the pvrdma device and the rdma subsystem")
released in v8.2.

Remove:
- PVRDMA device
- generated vmw_pvrdma/ directory from linux-headers
- rdmacm-mux tool from contrib/

Cc: Yuval Shaia <yuval.shaia.ml@gmail.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20240328130255.52257-2-philmd@linaro.org>

show more ...

target/nios2: Remove the deprecated Nios II target

The Nios II target is deprecated since v8.2 in commit 9997771bc1
("target/nios2: Deprecate the Nios II architecture").

Remove:
- Buildsys / CI inf

target/nios2: Remove the deprecated Nios II target

The Nios II target is deprecated since v8.2 in commit 9997771bc1
("target/nios2: Deprecate the Nios II architecture").

Remove:
- Buildsys / CI infra
- User emulation
- System emulation (10m50-ghrd & nios2-generic-nommu machines)
- Tests

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Marek Vasut <marex@denx.de>
Message-Id: <20240327144806.11319-3-philmd@linaro.org>

show more ...

hw/misc/aspeed_i3c: Move to i3c directory

Moves the Aspeed I3C model and traces into hw/i3c and create I3C build
files.

Signed-off-by: Joe Komlodi <komlodi@google.com>

Reviewed-by: Patrick Venture

hw/misc/aspeed_i3c: Move to i3c directory

Moves the Aspeed I3C model and traces into hw/i3c and create I3C build
files.

Signed-off-by: Joe Komlodi <komlodi@google.com>

Reviewed-by: Patrick Venture <venture@google.com>
Reviewed-by: Titus Rwantare <titusr@google.com>
[ clg: - replaced softmmu_ss with system_ss in meson.build files
- local variable renames in aspeed_i3c_realize() ]

Signed-off-by: Cédric Le Goater <clg@kaod.org>

show more ...

hw/fsi: Introduce IBM's Local bus

This is a part of patchset where IBM's Flexible Service Interface is
introduced.

The LBUS is modelled to maintain mapped memory for the devices. The
memory is mapp

hw/fsi: Introduce IBM's Local bus

This is a part of patchset where IBM's Flexible Service Interface is
introduced.

The LBUS is modelled to maintain mapped memory for the devices. The
memory is mapped after CFAM config, peek table and FSI slave registers.

[ clg: - removed lbus_add_device() bc unused
- removed lbus_create_device() bc used only once
- removed "address" property
- updated meson.build to build fsi dir
- included an empty hw/fsi/trace-events ]

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

show more ...

Merge tag 'pull-aspeed-20240201' of https://github.com/legoater/qemu into staging

aspeed queue:

* Update of buildroot images to 2023.11 (6.6.3 kernel)
* Check of the valid CPU type supported by asp

Merge tag 'pull-aspeed-20240201' of https://github.com/legoater/qemu into staging

aspeed queue:

* Update of buildroot images to 2023.11 (6.6.3 kernel)
* Check of the valid CPU type supported by aspeed machines
* Simplified models for the IBM's FSI bus and the Aspeed
controller bridge

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmW7Sa8ACgkQUaNDx8/7
# 7KG7mw/8DbMJY6aqgq5YANszzem1ktJphPCNxq081cbczCOUpCNX4aL+0/ANvxxD
# lbJQB+SZeIRmuFbxYPhq68rtzB4vG7tsQpns4H33EPKT4vuzF70lq4fgptMiun3q
# 1ZJ2LF3jonvQWdhbC17wzAQz0FFb4F7XOxz++UL4okPsgzsYItnd+TWs8q7+erRb
# 84UwN+eBTBAl/FiNk679/tBTqAfCVGgQ7dzotr4f3tg5POvrGOrlEjAn0O+dGGDj
# wgILmpEBsTsilRB1tz8Kw0j/v/VkHz1DJu45lRAV9CIrN22iKcjMilNGgNDT8kcI
# yAlxAw3iN+hVFqDov8wFPjDYd/Qw2oRAPy2Kd14hW9xL8zBOTms1JK5L0PS2+Feo
# ZjMJ2cOJq3t4Wt1ZXRhgHfF4ANwP0OZ/y9bHCy3CkBljEeiTQbikHP9gVV4qHXZH
# 4Q0HnDZQwAgobw3CmZ8jVx1dQueqy3ycuvkhCyv3S0l/tdbtXDtr5pNNu3dAP/PJ
# 3nifLdRImhDvxxO9GKaCdUVLzELzMJl0GrgAsVJPKVnKHA4IiVKmB+XcW9IUbfy/
# 3zA2wHJLrEF+MF6MsuNcEYCCqUvyNLm7rUrXk1wNLXpCJ35bbW5IYy7Ty/8E2GHb
# D5Cv/EPNhMBiNA4+HqQlMOTC13Ozv2qwCuWYCh2Ik8mnzaEiyTo=
# =0C5S
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 01 Feb 2024 07:35:11 GMT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1

* tag 'pull-aspeed-20240201' of https://github.com/legoater/qemu:
hw/fsi: Update MAINTAINER list
hw/fsi: Added FSI documentation
hw/fsi: Added qtest
hw/arm: Hook up FSI module in AST2600
hw/fsi: Aspeed APB2OPB & On-chip peripheral bus
hw/fsi: Introduce IBM's FSI master
hw/fsi: Introduce IBM's cfam
hw/fsi: Introduce IBM's fsi-slave model
hw/fsi: Introduce IBM's FSI Bus
hw/fsi: Introduce IBM's scratchpad device
hw/fsi: Introduce IBM's Local bus
hw/arm/aspeed: Check for CPU types in machine_run_board_init()
hw/arm/aspeed: Introduce aspeed_soc_cpu_type() helper
hw/arm/aspeed: Init CPU defaults in a common helper
hw/arm/aspeed: Set default CPU count using aspeed_soc_num_cpus()
hw/arm/aspeed: Remove dead code
tests/avocado/machine_aspeed.py: Update buildroot images to 2023.11

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/fsi: Introduce IBM's Local bus

This is a part of patchset where IBM's Flexible Service Interface is
introduced.

The LBUS is modelled to maintain mapped memory for the devices. The
memory is mapp

hw/fsi: Introduce IBM's Local bus

This is a part of patchset where IBM's Flexible Service Interface is
introduced.

The LBUS is modelled to maintain mapped memory for the devices. The
memory is mapped after CFAM config, peek table and FSI slave registers.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: - removed lbus_add_device() bc unused
- removed lbus_create_device() bc used only once
- removed "address" property
- updated meson.build to build fsi dir
- included an empty hw/fsi/trace-events ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>

show more ...

hw/misc/aspeed_i3c: Move to i3c directory

Moves the Aspeed I3C model and traces into hw/i3c and create I3C build
files.

Signed-off-by: Joe Komlodi <komlodi@google.com>

Reviewed-by: Patrick Venture

hw/misc/aspeed_i3c: Move to i3c directory

Moves the Aspeed I3C model and traces into hw/i3c and create I3C build
files.

Signed-off-by: Joe Komlodi <komlodi@google.com>

Reviewed-by: Patrick Venture <venture@google.com>
Reviewed-by: Titus Rwantare <titusr@google.com>
[ clg: replaced softmmu_ss with system_ss in meson.build files ]

Signed-off-by: Cédric Le Goater <clg@kaod.org>

show more ...

hw: Introduce models for IBM's Flexible Service Interface

Firstly, I'll split this patch up in the future, but wanted to get the
integrated setup sent out for any initial thoughts. Anyway:

Time for

hw: Introduce models for IBM's Flexible Service Interface

Firstly, I'll split this patch up in the future, but wanted to get the
integrated setup sent out for any initial thoughts. Anyway:

Time for some fun with inter-processor buses. FSI allows a service
processor access to the internal busses of a host POWER processor to
perform configuration or debugging.

FSI has long existed in POWER processes and so comes with some baggage,
including how it has been integrated into the ASPEED SoC.

Working backwards from the POWER processor, the fundamental pieces of
interest for the implementation are:

1. The Common FRU Access Macro (CFAM), an address space containing
various "engines" that drive accesses on busses internal and external
to the POWER chip. Examples include the SBEFIFO and I2C masters. The
engines hang off of an internal Local Bus (LBUS) which is described
by the CFAM configuration block.

2. The FSI slave: The slave is the terminal point of the FSI bus for
FSI symbols addressed to it. Slaves can be cascaded off of one
another. The slave's configuration registers appear in address space
of the CFAM to which it is attached.

3. The FSI master: A controller in the platform service processor (e.g.
BMC) driving CFAM engine accesses into the POWER chip. At the
hardware level FSI is a bit-based protocol supporting synchronous and
DMA-driven accesses of engines in a CFAM.

4. The On-Chip Peripheral Bus (OPB): A low-speed bus typically found in
POWER processors. This now makes an appearance in the ASPEED SoC due
to tight integration of the FSI master IP with the OPB, mainly the
existence of an MMIO-mapping of the CFAM address straight onto a
sub-region of the OPB address space.

5. An APB-to-OPB bridge enabling access to the OPB from the ARM core in
the AST2600. Hardware limitations prevent the OPB from being directly
mapped into APB, so all accesses are indirect through the bridge.

The implementation appears as following in the qemu device tree:

(qemu) info qtree
bus: main-system-bus
type System
...
dev: aspeed.apb2opb, id ""
gpio-out "sysbus-irq" 1
mmio 000000001e79b000/0000000000001000
bus: opb.1
type opb
dev: fsi.master, id ""
bus: fsi.bus.1
type fsi.bus
dev: cfam.config, id ""
dev: cfam, id ""
bus: lbus.1
type lbus
dev: scratchpad, id ""
address = 0 (0x0)
bus: opb.0
type opb
dev: fsi.master, id ""
bus: fsi.bus.0
type fsi.bus
dev: cfam.config, id ""
dev: cfam, id ""
bus: lbus.0
type lbus
dev: scratchpad, id ""
address = 0 (0x0)

The LBUS is modelled to maintain the qdev bus hierarchy and to take
advantage of the object model to automatically generate the CFAM
configuration block. The configuration block presents engines in the
order they are attached to the CFAM's LBUS. Engine implementations
should subclass the LBusDevice and set the 'config' member of
LBusDeviceClass to match the engine's type.

CFAM designs offer a lot of flexibility, for instance it is possible for
a CFAM to be simultaneously driven from multiple FSI links. The modeling
is not so complete; it's assumed that each CFAM is attached to a single
FSI slave (as a consequence the CFAM subclasses the FSI slave).

As for FSI, its symbols and wire-protocol are not modelled at all. This
is not necessary to get FSI off the ground thanks to the mapping of the
CFAM address space onto the OPB address space - the models follow this
directly and map the CFAM memory region into the OPB's memory region.
Future work includes supporting more advanced accesses that drive the
FSI master directly rather than indirectly via the CFAM mapping, which
will require implementing the FSI state machine and methods for each of
the FSI symbols on the slave. Further down the track we can also look at
supporting the bitbanged SoftFSI drivers in Linux by extending the FSI
slave model to resolve sequences of GPIO IRQs into FSI symbols, and
calling the associated symbol method on the slave to map the access onto
the CFAM.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
[clg: tons of fixes, lots of love and care and time.
we need to split this patch ! ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>

show more ...

Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging

Pull request

- Jeuk Kim's emulated UFS device
- Fabiano Rosas' IOThread GSource "name" debugging aid

# -----BEGIN PG

Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging

Pull request

- Jeuk Kim's emulated UFS device
- Fabiano Rosas' IOThread GSource "name" debugging aid

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmT6E3YACgkQnKSrs4Gr
# c8g3NwgAxVSzxS6hGCs6hKjRJ6f8HIlBWWbeO273XWbuAsMUbbYYAw7Gx6bzrbnb
# NFdFZ4F3M0lOfIaGFONasA4Wo2rIuiWVfj6Es4pcYjnexF0OmhAib2RLLEtuDlyc
# EJB/s4Mo2Xk+aw8LzQoYJVvDYi+hTZMmaHaQmNAsYLyQmsN/zg5iEE/vMDqVCNOs
# trv9rMGOJBblzJ4bqgItJ80nSVaEbwErpiU1+NTY77dpTeIt/3nq7yGAo+h4rVpc
# Tv4IuH8y6Rb9xjlwSANL2YKS2VOuJc5J/G5vpM63T4O2yzYSosTsU+ET/ZqB2U1H
# v0uT9K2akfsTOFR8rUaroFsXha8IMQ==
# =6SqP
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 07 Sep 2023 14:16:22 EDT
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [ultimate]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [ultimate]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8

* tag 'block-pull-request' of https://gitlab.com/stefanha/qemu:
tests/qtest: Introduce tests for UFS
hw/ufs: Support for UFS logical unit
hw/ufs: Support for Query Transfer Requests
hw/ufs: Initial commit for emulated Universal-Flash-Storage
iothread: Set the GSource "name" field

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

hw/ufs: Initial commit for emulated Universal-Flash-Storage

Universal Flash Storage (UFS) is a high-performance mass storage device
with a serial interface. It is primarily used as a high-performanc

hw/ufs: Initial commit for emulated Universal-Flash-Storage

Universal Flash Storage (UFS) is a high-performance mass storage device
with a serial interface. It is primarily used as a high-performance
data storage device for embedded applications.

This commit contains code for UFS device to be recognized
as a UFS PCI device.
Patches to handle UFS logical unit and Transfer Request will follow.

Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 10232660d462ee5cd10cf673f1a9a1205fc8276c.1693980783.git.jeuk20.kim@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

hw/misc/aspeed_i3c: Move to i3c directory

Moves the Aspeed I3C model and traces into hw/i3c and create I3C build
files.

Signed-off-by: Joe Komlodi <komlodi@google.com>

Reviewed-by: Patrick Venture

hw/misc/aspeed_i3c: Move to i3c directory

Moves the Aspeed I3C model and traces into hw/i3c and create I3C build
files.

Signed-off-by: Joe Komlodi <komlodi@google.com>

Reviewed-by: Patrick Venture <venture@google.com>
Reviewed-by: Titus Rwantare <titusr@google.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

show more ...

hw: Introduce models for IBM's Flexible Service Interface

Firstly, I'll split this patch up in the future, but wanted to get the
integrated setup sent out for any initial thoughts. Anyway:

Time for

hw: Introduce models for IBM's Flexible Service Interface

Firstly, I'll split this patch up in the future, but wanted to get the
integrated setup sent out for any initial thoughts. Anyway:

Time for some fun with inter-processor buses. FSI allows a service
processor access to the internal busses of a host POWER processor to
perform configuration or debugging.

FSI has long existed in POWER processes and so comes with some baggage,
including how it has been integrated into the ASPEED SoC.

Working backwards from the POWER processor, the fundamental pieces of
interest for the implementation are:

1. The Common FRU Access Macro (CFAM), an address space containing
various "engines" that drive accesses on busses internal and external
to the POWER chip. Examples include the SBEFIFO and I2C masters. The
engines hang off of an internal Local Bus (LBUS) which is described
by the CFAM configuration block.

2. The FSI slave: The slave is the terminal point of the FSI bus for
FSI symbols addressed to it. Slaves can be cascaded off of one
another. The slave's configuration registers appear in address space
of the CFAM to which it is attached.

3. The FSI master: A controller in the platform service processor (e.g.
BMC) driving CFAM engine accesses into the POWER chip. At the
hardware level FSI is a bit-based protocol supporting synchronous and
DMA-driven accesses of engines in a CFAM.

4. The On-Chip Peripheral Bus (OPB): A low-speed bus typically found in
POWER processors. This now makes an appearance in the ASPEED SoC due
to tight integration of the FSI master IP with the OPB, mainly the
existence of an MMIO-mapping of the CFAM address straight onto a
sub-region of the OPB address space.

5. An APB-to-OPB bridge enabling access to the OPB from the ARM core in
the AST2600. Hardware limitations prevent the OPB from being directly
mapped into APB, so all accesses are indirect through the bridge.

The implementation appears as following in the qemu device tree:

(qemu) info qtree
bus: main-system-bus
type System
...
dev: aspeed.apb2opb, id ""
gpio-out "sysbus-irq" 1
mmio 000000001e79b000/0000000000001000
bus: opb.1
type opb
dev: fsi.master, id ""
bus: fsi.bus.1
type fsi.bus
dev: cfam.config, id ""
dev: cfam, id ""
bus: lbus.1
type lbus
dev: scratchpad, id ""
address = 0 (0x0)
bus: opb.0
type opb
dev: fsi.master, id ""
bus: fsi.bus.0
type fsi.bus
dev: cfam.config, id ""
dev: cfam, id ""
bus: lbus.0
type lbus
dev: scratchpad, id ""
address = 0 (0x0)

The LBUS is modelled to maintain the qdev bus hierarchy and to take
advantage of the object model to automatically generate the CFAM
configuration block. The configuration block presents engines in the
order they are attached to the CFAM's LBUS. Engine implementations
should subclass the LBusDevice and set the 'config' member of
LBusDeviceClass to match the engine's type.

CFAM designs offer a lot of flexibility, for instance it is possible for
a CFAM to be simultaneously driven from multiple FSI links. The modeling
is not so complete; it's assumed that each CFAM is attached to a single
FSI slave (as a consequence the CFAM subclasses the FSI slave).

As for FSI, its symbols and wire-protocol are not modelled at all. This
is not necessary to get FSI off the ground thanks to the mapping of the
CFAM address space onto the OPB address space - the models follow this
directly and map the CFAM memory region into the OPB's memory region.
Future work includes supporting more advanced accesses that drive the
FSI master directly rather than indirectly via the CFAM mapping, which
will require implementing the FSI state machine and methods for each of
the FSI symbols on the slave. Further down the track we can also look at
supporting the bitbanged SoftFSI drivers in Linux by extending the FSI
slave model to resolve sequences of GPIO IRQs into FSI symbols, and
calling the associated symbol method on the slave to map the access onto
the CFAM.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
[clg: tons of fixes, lots of love and care and time.
we need to split this patch ! ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>

show more ...

Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging

* bugfixes
* show machine ACPI support in QAPI
* Core Xen emulation support for KVM/x86

# -----BEGIN PGP SIGNATURE-----
#
#

Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging

* bugfixes
* show machine ACPI support in QAPI
* Core Xen emulation support for KVM/x86

# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmQAlrYUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroONWwf/fxDUMcZUvvatNxiVMhNfqEt/cL0F
# Durv1PmbbeVh9PP0W7XFkEXO3LCIRDyR4rtmCs7gHGdmzDOWQ+QIWgQijQ/y7ElQ
# bTVsvs0+s/6H3csP3dJTJaXSHshbQvrAZTsyk5KcAB6xdL1KqulfLUoGvXJhAmRs
# NKZN8un+nuAhFhL0VBWA9eQaP+BVHQI5ItAj8PaoBby4+Q9fNnat6j1/G4iLly8J
# dxIwCnuRHLiB3melWtadwbv6ddLJFeZNa50HUIsynqoItTzmRVr+oXz1yfq087dB
# 9uksmoqb+icGEdwqs0iYbQ/dhVnIrMDpn/n2Us28S5VdIMVvxr1JEbEkSQ==
# =0jY8
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 02 Mar 2023 12:29:42 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (62 commits)
Makefile: qemu-bundle is a directory
qapi: Add 'acpi' field to 'query-machines' output
hw/xen: Subsume xen_be_register_common() into xen_be_init()
i386/xen: Document Xen HVM emulation
kvm/i386: Add xen-evtchn-max-pirq property
hw/xen: Support MSI mapping to PIRQ
hw/xen: Support GSI mapping to PIRQ
hw/xen: Implement emulated PIRQ hypercall support
i386/xen: Implement HYPERVISOR_physdev_op
hw/xen: Automatically add xen-platform PCI device for emulated Xen guests
hw/xen: Add basic ring handling to xenstore
hw/xen: Add xen_xenstore device for xenstore emulation
hw/xen: Add backend implementation of interdomain event channel support
i386/xen: handle HVMOP_get_param
i386/xen: Reserve Xen special pages for console, xenstore rings
i386/xen: handle PV timer hypercalls
hw/xen: Implement GNTTABOP_query_size
i386/xen: Implement HYPERVISOR_grant_table_op and GNTTABOP_[gs]et_verson
hw/xen: Support mapping grant frames
hw/xen: Add xen_gnttab device for grant table emulation
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge branch 'xenfv-kvm-15' of git://git.infradead.org/users/dwmw2/qemu into HEAD

This adds support for emulating Xen under Linux/KVM, based on kernel
patches which have been present since Linux v5.

Merge branch 'xenfv-kvm-15' of git://git.infradead.org/users/dwmw2/qemu into HEAD

This adds support for emulating Xen under Linux/KVM, based on kernel
patches which have been present since Linux v5.12. As with the kernel
support, it's derived from work started by João Martins of Oracle in
2018.

This series just adds the basic platform support — CPUID, hypercalls,
event channels, a stub of XenStore.

A full single-tenant internal implementation of XenStore, and patches
to make QEMU's Xen PV drivers work with this Xen emulation, are waiting
in the wings to be submitted in a follow-on patch series.

As noted in the documentation, it's enabled by setting the xen-version
property on the KVM accelerator, e.g.:

qemu-system-x86_64 -serial mon:stdio -M q35 -display none -m 1G -smp 2 \
-accel kvm,xen-version=0x4000e,kernel-irqchip=split \
-kernel vmlinuz-6.0.7-301.fc37.x86_64 \
-append "console=ttyS0 root=/dev/sda1" \
-drive file=/var/lib/libvirt/images/fedora28.qcow2,if=none,id=disk \
-device ahci,id=ahci -device ide-hd,drive=disk,bus=ahci.0

Even before this was merged, we've already been using it to find and fix
bugs in the Linux kernel Xen guest support:

https://lore.kernel.org/all/4bffa69a949bfdc92c4a18e5a1c3cbb3b94a0d32.camel@infradead.org/
https://lore.kernel.org/all/871qnunycr.ffs@tglx/

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

xen: add CONFIG_XEN_BUS and CONFIG_XEN_EMU options for Xen emulation

The XEN_EMU option will cover core Xen support in target/, which exists
only for x86 with KVM today but could theoretically also

xen: add CONFIG_XEN_BUS and CONFIG_XEN_EMU options for Xen emulation

The XEN_EMU option will cover core Xen support in target/, which exists
only for x86 with KVM today but could theoretically also be implemented
on Arm/Aarch64 and with TCG or other accelerators (if anyone wants to
run the gauntlet of struct layout compatibility, errno mapping, and the
rest of that fui).

It will also cover the support for architecture-independent grant table
and event channel support which will be added in hw/i386/kvm/ (on the
basis that the non-KVM support is very theoretical and making it not use
KVM directly seems like gratuitous overengineering at this point).

The XEN_BUS option is for the xenfv platform support, which will now be
used both by XEN_EMU and by real Xen.

The XEN option remains dependent on the Xen runtime libraries, and covers
support for real Xen. Some code which currently resides under CONFIG_XEN
will be moving to CONFIG_XEN_BUS over time as the direct dependencies on
Xen runtime libraries are eliminated. The Xen PCI platform device will
also reside under CONFIG_XEN_BUS.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>

show more ...

hw: Introduce models for IBM's Flexible Service Interface

Firstly, I'll split this patch up in the future, but wanted to get the
integrated setup sent out for any initial thoughts. Anyway:

Time for

hw: Introduce models for IBM's Flexible Service Interface

Firstly, I'll split this patch up in the future, but wanted to get the
integrated setup sent out for any initial thoughts. Anyway:

Time for some fun with inter-processor buses. FSI allows a service
processor access to the internal busses of a host POWER processor to
perform configuration or debugging.

FSI has long existed in POWER processes and so comes with some baggage,
including how it has been integrated into the ASPEED SoC.

Working backwards from the POWER processor, the fundamental pieces of
interest for the implementation are:

1. The Common FRU Access Macro (CFAM), an address space containing
various "engines" that drive accesses on busses internal and external
to the POWER chip. Examples include the SBEFIFO and I2C masters. The
engines hang off of an internal Local Bus (LBUS) which is described
by the CFAM configuration block.

2. The FSI slave: The slave is the terminal point of the FSI bus for
FSI symbols addressed to it. Slaves can be cascaded off of one
another. The slave's configuration registers appear in address space
of the CFAM to which it is attached.

3. The FSI master: A controller in the platform service processor (e.g.
BMC) driving CFAM engine accesses into the POWER chip. At the
hardware level FSI is a bit-based protocol supporting synchronous and
DMA-driven accesses of engines in a CFAM.

4. The On-Chip Peripheral Bus (OPB): A low-speed bus typically found in
POWER processors. This now makes an appearance in the ASPEED SoC due
to tight integration of the FSI master IP with the OPB, mainly the
existence of an MMIO-mapping of the CFAM address straight onto a
sub-region of the OPB address space.

5. An APB-to-OPB bridge enabling access to the OPB from the ARM core in
the AST2600. Hardware limitations prevent the OPB from being directly
mapped into APB, so all accesses are indirect through the bridge.

The implementation appears as following in the qemu device tree:

(qemu) info qtree
bus: main-system-bus
type System
...
dev: aspeed.apb2opb, id ""
gpio-out "sysbus-irq" 1
mmio 000000001e79b000/0000000000001000
bus: opb.1
type opb
dev: fsi.master, id ""
bus: fsi.bus.1
type fsi.bus
dev: cfam.config, id ""
dev: cfam, id ""
bus: lbus.1
type lbus
dev: scratchpad, id ""
address = 0 (0x0)
bus: opb.0
type opb
dev: fsi.master, id ""
bus: fsi.bus.0
type fsi.bus
dev: cfam.config, id ""
dev: cfam, id ""
bus: lbus.0
type lbus
dev: scratchpad, id ""
address = 0 (0x0)

The LBUS is modelled to maintain the qdev bus hierarchy and to take
advantage of the object model to automatically generate the CFAM
configuration block. The configuration block presents engines in the
order they are attached to the CFAM's LBUS. Engine implementations
should subclass the LBusDevice and set the 'config' member of
LBusDeviceClass to match the engine's type.

CFAM designs offer a lot of flexibility, for instance it is possible for
a CFAM to be simultaneously driven from multiple FSI links. The modeling
is not so complete; it's assumed that each CFAM is attached to a single
FSI slave (as a consequence the CFAM subclasses the FSI slave).

As for FSI, its symbols and wire-protocol are not modelled at all. This
is not necessary to get FSI off the ground thanks to the mapping of the
CFAM address space onto the OPB address space - the models follow this
directly and map the CFAM memory region into the OPB's memory region.
Future work includes supporting more advanced accesses that drive the
FSI master directly rather than indirectly via the CFAM mapping, which
will require implementing the FSI state machine and methods for each of
the FSI symbols on the slave. Further down the track we can also look at
supporting the bitbanged SoftFSI drivers in Linux by extending the FSI
slave model to resolve sequences of GPIO IRQs into FSI symbols, and
calling the associated symbol method on the slave to map the access onto
the CFAM.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
[clg: tons of fixes, lots of love and care and time/
we need to split this patch ! ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>

show more ...

Merge tag 'pull-la-20220606' of https://gitlab.com/rth7680/qemu into staging

Initial LoongArch support.

# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmKeiRYdHHJpY

Merge tag 'pull-la-20220606' of https://gitlab.com/rth7680/qemu into staging

Initial LoongArch support.

# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmKeiRYdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV85Kgf/buBy5+0y51NKOpTI
# zwFzvuQoWyMwb1nz1ag3i0Sk5fk72zmQI13fwfCgyUZckT165qISa2hohnzl4zVZ
# CO0uZl44makET+uqJn5h2VXSM7Wf+jv0UzbCElVQuEFt0t1bIPbco0pTx/TojBb+
# +YKN4jobvJiLVhD1wDVJqp/2r9gcnX11EWZk+ZC+pIiEqYZpWRcQdEGVh4Ymhig8
# 0LK/8HRSyw0AecX/01hcGWvYCC0ldFicwN69AD42BqM+7WD+3jnV8FJL8qqq766G
# xuCNHz0eDcVgfw9bCEyhFmhgiBFvOXNCtyDOV0qVn7eee9nIrFZcsGyBqeI/T1el
# e7uz8Q==
# =l8TD
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 06 Jun 2022 04:09:10 PM PDT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]

* tag 'pull-la-20220606' of https://gitlab.com/rth7680/qemu: (43 commits)
target/loongarch: 'make check-tcg' support
tests/tcg/loongarch64: Add hello/memory test in loongarch64 system
target/loongarch: Add gdb support.
hw/loongarch: Add LoongArch virt power manager support.
hw/loongarch: Add LoongArch load elf function.
hw/loongarch: Add LoongArch ls7a rtc device support
hw/loongarch: Add some devices support for 3A5000.
Enable common virtio pci support for LoongArch
hw/loongarch: Add irq hierarchy for the system
hw/intc: Add LoongArch extioi interrupt controller(EIOINTC)
hw/intc: Add LoongArch ls7a msi interrupt controller support(PCH-MSI)
hw/intc: Add LoongArch ls7a interrupt controller support(PCH-PIC)
hw/loongarch: Add LoongArch ipi interrupt support(IPI)
hw/loongarch: Add support loongson3 virt machine type.
target/loongarch: Add timer related instructions support.
target/loongarch: Add other core instructions support
target/loongarch: Add TLB instruction support
target/loongarch: Add LoongArch IOCSR instruction
target/loongarch: Add LoongArch CSR instruction
target/loongarch: Add constant timer support
...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...