meson: enable oem-ampere by default

We want the meson.options to contain the maximal set so that the vast
majority of code is tested in CI. This prevents issues where code is
merged that doesn't co

meson: enable oem-ampere by default

We want the meson.options to contain the maximal set so that the vast
majority of code is tested in CI. This prevents issues where code is
merged that doesn't compile and then is only caught in full Yocto
builds.

The meson option can be disabled by default in the Yocto recipe, which
has been done now[1]. Enable at the repository level.

[1]: https://gerrit.openbmc.org/c/openbmc/openbmc/+/75691

Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: Ia4ecf1c7aeea8a2f25e9db6fdb07655c75a34d0c

show more ...

oem-ampere: eventManager: Handle `BootProgress` sensor event

Add Ampere OEM code to handle the `sensorEvent` for PLDM `BootProgress`
sensor. In Ampere system, the SOC termini will have the TID 1 or

oem-ampere: eventManager: Handle `BootProgress` sensor event

Add Ampere OEM code to handle the `sensorEvent` for PLDM `BootProgress`
sensor. In Ampere system, the SOC termini will have the TID 1 or 2. The
Ampere OEM EventManager will check the terminus TID to confirm about the
terminus type. Base on the value of `BootProgress` sensor, the OEM code
will add the Redfish Log to report the boot progress of Ampere SoC.

Tested:
1. Power on the host.
2. Check the Redfish SEL log.

Signed-off-by: Chau Ly <chaul@amperecomputing.com>
Signed-off-by: Thu Nguyen <thu@os.amperecomputing.com>
Change-Id: Icc51537ef17ee8eb4b5b571eafeea7b5d7763cbe

show more ...

platform-mc: Add sensor manager

Added sensor_manager class. The sensor_manager class manages the timing
of sensor polling.

tested: Verified on ast2600 EVB which is connected to a PLDM device
over I

platform-mc: Add sensor manager

Added sensor_manager class. The sensor_manager class manages the timing
of sensor polling.

tested: Verified on ast2600 EVB which is connected to a PLDM device
over I2C. bmcweb can display the state of numeric sensor.

Signed-off-by: Gilbert Chen <gilbert.chen@arm.com>
Signed-off-by: Thu Nguyen <thu@os.amperecomputing.com>
Change-Id: I4257f823ea26d7fdb322cc82d847e94db056258c

show more ...

platform-mc: Create Numeric sensor D-Bus object

Added numeric_sensor class. The NumericSensor class will create the
Numeric sensor D-Bus object. The class also handles sensor status and
exports its

platform-mc: Create Numeric sensor D-Bus object

Added numeric_sensor class. The NumericSensor class will create the
Numeric sensor D-Bus object. The class also handles sensor status and
exports its status to D-Bus interfaces.

tested: Verified on ast2600 EVB which is connected to a PLDM device
over I2C. bmcweb can display the state of numeric sensor.

Signed-off-by: Thu Nguyen <thu@os.amperecomputing.com>
Change-Id: I1c7de2e74100ed787ed2119896d3c5b36098dd96

show more ...

Deprecate the support for x86 sdk

OpenBMC as a project has moved away from using yocto x86 sdks for unit
testing. Instead now the preferred way to build and test code is by two
ways:

1. Leveraging

Deprecate the support for x86 sdk

OpenBMC as a project has moved away from using yocto x86 sdks for unit
testing. Instead now the preferred way to build and test code is by two
ways:

1. Leveraging the meson subproject support
2. Using openbmc docker container

Since x86 sdks needed some weird hacks in the code base like figuring
out the linker arguments ourselves & running custom bash commands from
the meson build files. Also with changing yocto code base, its a large
maintainer burden to make sure this support works.

Tested:
Code builds & unit tests are passed with both the approaches mentioned
above.

Change-Id: Iaf55e2c003ffd9ee1a295de5bdfd14d81222e94b
Signed-off-by: Manojkiran Eda <manojkiran.eda@gmail.com>

show more ...

pldm: Meson option for system specific bios attributes

PLDM users who want to use bios attributes based on the system type
can enable this meson option.
With disabled option default bios json files

pldm: Meson option for system specific bios attributes

PLDM users who want to use bios attributes based on the system type
can enable this meson option.
With disabled option default bios json files are picked to build
bios attribute tables.

Added meson option "system-specific-bios-json" to add the support
for system specific bios attributes.
Below is the pre-requisite to support system specific bios
attributes:
1. Entity Manager service is active
2. Entity Manager should have Decorator.Compatible interface
and system type in Names property under this interface
3. BIOS Attribute json files are added into the folder(Named on
the System Type property value) and should be installed
under /usr/share/pldm/bios/

With disabled "system-specific-bios-json" option default bios
attributes are populated.

Tested:
Poweron system-specific-bios-json enabled/disabled

Change-Id: I95a953cdb12c344d22f487b83040356a1b5fa937
Signed-off-by: Archana Kakani <archana.kakani@ibm.com>

show more ...

meson: disable oe-sdk by default

The meson option oe-sdk is used in rare scenarios. Having it
non-defaulted turns it into an `auto` feature, which is not desired.
Explicitly disable it by default.

meson: disable oe-sdk by default

The meson option oe-sdk is used in rare scenarios. Having it
non-defaulted turns it into an `auto` feature, which is not desired.
Explicitly disable it by default.

Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I51c3d1477cbeea6a88cdee331266d9df188f0024

show more ...

pldm: Convert to using libpldm transport APIs

A significant amount of logic can be removed by exploiting the new
transport APIs provided by libpldm. Switch the pldm repository over to
use these by i

pldm: Convert to using libpldm transport APIs

A significant amount of logic can be removed by exploiting the new
transport APIs provided by libpldm. Switch the pldm repository over to
use these by introducing an RAII wrapper for the APIs. The current
stance is to continue using the legacy mctp-demux transport
implementation, but we also provide a build option to switch to the
AF_MCTP transport.

We don't currently have the infrastructure in place to get the correct
TIDs, so to keep everything working as before use the EID as the TID in
the EID-to-TID mapping.

Change-Id: I366f079082b102cfc0e90db0f62208581eb8693e
Signed-off-by: Rashmica Gupta <rashmica@linux.ibm.com>
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Signed-off-by: Thu Nguyen <thu@os.amperecomputing.com>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>

show more ...

meson_options.txt: Support for reading options from meson.options

Support has been added for reading options from meson.options instead
of meson_options.txt[1]. These are equivalent, but not using t

meson_options.txt: Support for reading options from meson.options

Support has been added for reading options from meson.options instead
of meson_options.txt[1]. These are equivalent, but not using the .txt
extension for a build file has a few advantages, chief among them
many tools and text editors expect a file with the .txt extension to
be plain text files, not build scripts.

[1] https://mesonbuild.com/Release-notes-for-1-1-0.html#support-for-reading-options-from-mesonoptions

Change-Id: I5f018fbf230cea3a593a87cad83822e944bfaaf2
Signed-off-by: George Liu <liuxiwei@inspur.com>

show more ...