Convert to lg2

Convert the remaining logging statements to lg2.

Change-Id: I45bc8ed76f9b71517a5a8119e89713278e31679d
Signed-off-by: Matt Spinler <spinler@us.ibm.com>

Convert version 1 files to version 2 on startup

When reading in persisted property values from their files, check the
version number the file was saved in. If that version is less than the
first ve

Convert version 1 files to version 2 on startup

When reading in persisted property values from their files, check the
version number the file was saved in. If that version is less than the
first version using name/value pairs, then rewrite the file using the
latest version.

This is done so that it removes the possibility of the problem described
in openbmc/phosphor-settingsd/#16 of occurring in the future, which is
where if a new property is added it gets set to another property's
value.

This also creates functions for the serializing and deserializing so the
code to do it just needs to be in one place.

Note that if a version of code runs from when before NVP support was
added, it can still read files saved with the new version so this change
is backwards compatible.

Change-Id: Ib0be93de2151bc9435664179690b0eac2bb980ff
Signed-off-by: Matt Spinler <spinler@us.ibm.com>

show more ...

Use named values when serializing

As described by openbmc/phosphor-settingsd#16, the code has a problem
when a new D-Bus property is added to a settings object that has a
modified property, meaning

Use named values when serializing

As described by openbmc/phosphor-settingsd#16, the code has a problem
when a new D-Bus property is added to a settings object that has a
modified property, meaning it has been serialized to file. This is
because the file doesn't say which property the value is meant for - the
fields are only named value0, value1, etc. So if the new property is
alphabetically before the original property, the code will read the
value0 value into the new property though it was meant to be for the
original one.

To fix this, start using cereal's Name/Value Pair (NVP) feature, with
the field names named after the property, like:
"QuiesceOnHwError": true

This requires the cereal version to bump from 1 to 2. When saving, the
code will always write using version 2 using NVPs. When loading it will
check the version in the file and if it was 1 it will read it using the
original non-NVP method, otherwise it will use the NVP method.

Example generated load and save functions:

```
template<class Archive>
void save(Archive& a,
const Impl& setting,
[[maybe_unused]] const std::uint32_t version)
{
a(cereal::make_nvp("AutoReboot", setting.autoReboot()));
}

template<class Archive>
void load(Archive& a,
Impl& setting,
const std::uint32_t version)
{
decltype(setting.autoReboot()) AutoReboot{};

if (version < CLASS_VERSION_WITH_NVP)
{
a(AutoReboot);
}
else
{
try
{
a(CEREAL_NVP(AutoReboot));
}
catch (const cereal::Exception& e)
{
std::cerr << "Could not restore property AutoReboot on /xyz/openbmc_project/control/host0/auto_reboot, "
<< "setting to default value.\n";
AutoReboot = true;
}
}

setting.autoReboot(AutoReboot);
}
```

This does require that the property names be unique across all
interfaces on that object path. So far that isn't an issue for anything
I've seen, and there is a check in the code that will cause a compile
failure if that occurs. If necessary, support could be added for this
but it didn't seem necessary as that is fairly unlikely.

Now if a new property is added to an object path with existing
serialized data, the code can see that that field isn't in the file and
will just initialize that property to the default value given in the
YAML.

If the version of code before this commit is applied to a system after
this code has already been run, it is still able to read in the values
even though they have real names instead of the valueN ones since other
than the name they are still in the same order and format.

Resolves openbmc/phosphor-settingsd#16

Change-Id: Ia8f4712d7098dd530895b1db4e4d0a7f88f4b9dc
Signed-off-by: Matt Spinler <spinler@us.ibm.com>

show more ...

Extract default property value calc into function

Make a function out of the python code that calculates the default value
of a property so that it can be used in multiple places.

An upcoming commi

Extract default property value calc into function

Make a function out of the python code that calculates the default value
of a property so that it can be used in multiple places.

An upcoming commit will also use it if it has problems restoring the
property from its backing file.

Change-Id: I22b0f1130e7dce8c4b83e9111ad0d4895637404e
Signed-off-by: Matt Spinler <spinler@us.ibm.com>

show more ...

meson: Switch autoconf build to meson

Summary:
- Add meson build flow.
- Remove the options not being configured from yocto as configure
args and add them as constants/define in settings_manager.h

meson: Switch autoconf build to meson

Summary:
- Add meson build flow.
- Remove the options not being configured from yocto as configure
args and add them as constants/define in settings_manager.hpp

Tested:
- autotools build passes.
- meson build passes with "ninja -C build".

Change-Id: Iaa7704886cdcd5481a04bae77e02df2c6a53aee9
Signed-off-by: Jagpal Singh Gill <paligill@gmail.com>

show more ...

meson: Address warnings for switching autoconf to meson

This commit addresses the compilation warnings when switching autoconf
to meson.

Tested: Build passes with CIT and "ninja -C build".

Change-

meson: Address warnings for switching autoconf to meson

This commit addresses the compilation warnings when switching autoconf
to meson.

Tested: Build passes with CIT and "ninja -C build".

Change-Id: Ieda04b856f4fd24de867c3eaee8b9c4a9b333aaf
Signed-off-by: Jagpal Singh Gill <paligill@gmail.com>

show more ...

sdbusplus: use shorter type aliases

The sdbusplus headers provide shortened aliases for many types.
Switch to using them to provide better code clarity and shorter
lines. Possible replacements are

sdbusplus: use shorter type aliases

The sdbusplus headers provide shortened aliases for many types.
Switch to using them to provide better code clarity and shorter
lines. Possible replacements are for:
* bus_t
* exception_t
* manager_t
* match_t
* message_t
* object_t
* slot_t

Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I662faee19b7b289bc0a39665fc5ce9e19406f933

show more ...

Use relative path to append path

The path append behavior changed between std::experimental and
std::filesystem, appending an absolute path (path with a leading slash)
replaces the path instead of a

Use relative path to append path

The path append behavior changed between std::experimental and
std::filesystem, appending an absolute path (path with a leading slash)
replaces the path instead of appending to it, therefore need to use the
relative path (path without the leading slash) when appending.

The issue was that directories were attempted to be created on "/xyz/.."
instead of "SETTINGS_PERSIST_PATH/xyz/..", causing the settings manager
to fail with:
what(): filesystem error: cannot create directories: Read-only file
system [/xyz/openbmc_project/control/host0]

Tested: Verified this error is not seeing when making redfish calls.
Also verified the generated build/settings_manager.hpp file uses either
the relative path or the xyz path doesn't have the leading slash:
p /= path.relative_path();
path = fs::path(SETTINGS_PERSIST_PATH) / "xyz/openbmc_project/control/host0/TPMEnable";

Change-Id: Idd456baff5f39dc4464745daef9cb884481dca45
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>

show more ...

switch experimental::fs to std::fs

std::filesystem was added to C++17 and is well supported now. Remove
the older std::experimental::filesystem usage.

Signed-off-by: Patrick Williams <patrick@stwc

switch experimental::fs to std::fs

std::filesystem was added to C++17 and is well supported now. Remove
the older std::experimental::filesystem usage.

Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I873667cf78efdf4f8ee2b63e8299783a5cba5ae4

show more ...

fix cppcheck warnings

- Single parameter constructor was not marked 'explicit'.
- Member variable was not initialized in the constructor init.

Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Ch

fix cppcheck warnings

- Single parameter constructor was not marked 'explicit'.
- Member variable was not initialized in the constructor init.

Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I42c35e8300ca6670155840ddf47f61a7b93d5b42

show more ...

sdbusplus: object: don't use 'bool' argument constructor

`sdbusplus::server::object_t` has long had an enum-based parameter for
signal action, but maintained a backwards compatible boolean mapping.

sdbusplus: object: don't use 'bool' argument constructor

`sdbusplus::server::object_t` has long had an enum-based parameter for
signal action, but maintained a backwards compatible boolean mapping.
It is time to remove this boolean to make it more observable which
actions are being used in applications. Map all `true` occurrences to
`action::defer_emit`.

Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I6d8796f14e3e25c9dbf7149e9affdb3d826d220c

show more ...

mako: Support interfaces without property

If a settings interface contains no property, the code get compiles
failure that the cereal does not know how to de-serialize the object.

It turns out that

mako: Support interfaces without property

If a settings interface contains no property, the code get compiles
failure that the cereal does not know how to de-serialize the object.

It turns out that if an interface has no property, it does not need to
serialize/de-serialize the properties at all.

Add a check in mako to skip the above for interfaces without properties,
and then the code compiles fine.

Tested: Verify we could add an interface without property to a DBus
object, e.g. xyz.openbmc_project.Inventory.Item.Bmc

Signed-off-by: Lei YU <yulei.sh@bytedance.com>
Change-Id: I68a9e689c2e2a9da65c8b090ac925baebd27733a

show more ...

catch exceptions as const

Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: Ic4d935b6d33e49dfb5606239b20db10514a95c1a

Use full name for enum default values

In the case where there were multiple interfaces specified in the
settings YAML that had the same last segment, the code generator would
create

Use full name for enum default values

In the case where there were multiple interfaces specified in the
settings YAML that had the same last segment, the code generator would
create unbuildable code when those classes both specified default values
for properties that were enums. This happened because there was a
'using namespace ...' line for every class at global scope, so when
the default value for the enum was specified, the compiler wouldn't know
which class to use.

For example, if there were two interfaces that used a class called Mode
that each tried to set default values like:
* Mode::bootMode::Safe
* Mode::powerMode::Static
then the generated code wouldn't compile.

Fix this by removing the global using namespace lines and add the full
prefix to the enum default values when they are set in the initSetting
lambdas.

Note that the code still won't compile when classes of the same name are
used on the same object path. This is because of the 'using IfaceX'
lines in the scope of each Impl class. Fixing that is outside of the
scope of this commit, which was done to fix a real world use.

Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Change-Id: I25ac36a58febe4449a29af845e5faba12bb0e63f

show more ...

Use sdbus++ python library for name conversion

This code attempts to come up with sdbus++ property names by
doing its own string manipulation. That conversion is likely
wrong in the

Use sdbus++ python library for name conversion

This code attempts to come up with sdbus++ property names by
doing its own string manipulation. That conversion is likely
wrong in the future. Instead, import the sdbus++ python code
directly and call the appropriate function from it.

Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I767ff842c37b183f925d7add87e96bb850092810

show more ...

python2 to python3 conversion

Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I1716d022bb67b1301f771c575842175372b04bef

Add array support for defauts

Based on:
https://uscilab.github.io/cereal/stl_support.html

To support vector we need to #include the cereal
vector header.

Closes #12

Add array support for defauts

Based on:
https://uscilab.github.io/cereal/stl_support.html

To support vector we need to #include the cereal
vector header.

Closes #12

Tested-by: Was able to add an array default using
C++ vector syntax

Change-Id: I3b00c372b668ddcda69a56ede8edbc51ab2693f5
Signed-off-by: James Feist <james.feist@linux.intel.com>

show more ...

Enable Cereal class versioning

Fixes openbmc/openbmc#2320

Change-Id: Iac2649cd5f4794e2049cbdd4eb2df874d26beaaa
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>

cereal: Fix empty file scenario

Cereal throws execption when deserialising empty file, add code
to handle empty exception and default the setting to the default
value.

Chang

cereal: Fix empty file scenario

Cereal throws execption when deserialising empty file, add code
to handle empty exception and default the setting to the default
value.

Change-Id: I466f44d07c902a27344a483b5b574e0507baa2f4
Signed-off-by: Tom Joseph <tomjoseph@in.ibm.com>

show more ...

settings objects: support multiple interfaces

A settings object had the limitation that it could implement a single,
corresponding settings interface. This was found to be too restrictiv

settings objects: support multiple interfaces

A settings object had the limitation that it could implement a single,
corresponding settings interface. This was found to be too restrictive
because there are use-cases (such as in the boot settings area) that
would simplify describing settings with objects that can implement more
than one interface.

This commit adds the ability for settings objects to implement multiple
interfaces. The settings config yaml now should contain a list of
interface(s) under each settings object.

Change-Id: I90dec9e766e1afd1b0c8616e491832714bbd069d
Signed-off-by: Deepak Kodihalli <dkodihal@in.ibm.com>

show more ...

Fix settingsd core dump/persistence fail

The problem was seen only with network settings objects, because they
had paths as following:

A setting d-bus object /foo/bar/baz is per

Fix settingsd core dump/persistence fail

The problem was seen only with network settings objects, because they
had paths as following:

A setting d-bus object /foo/bar/baz is persisted in the filesystem with
the same path. This eases re-construction of settings objects when we
restore from the filesystem. This can be a problem though when you have
two objects such as - /foo/bar and /foo/bar/baz. This is because 'bar'
will be treated a file in the first case, and a subdir in the second.
This was causing an exception to be thrown by Cereal, because it found a
dir where it was expecting a file. This also caused us to not persist
certain network setting objects because we couldn't create subdirs
as there were files of the same name.

To solve this, suffix files with a trailing __. The __ is a safe
character sequence to use, because we won't have d-bus object paths
ending with this. With this the objects would be persisted as -
/foo/bar__ and /foo/bar/baz__.

Change-Id: I76b6a0423db1f2f51bd1b6ab2ea5f9cafd1a36d9
Signed-off-by: Deepak Kodihalli <dkodihal@in.ibm.com>

show more ...

Validate changes to default settings.

Resolves openbmc/openbmc#1771

Change-Id: I763e811e88710425131ec504ff933e3c41c458e6
Signed-off-by: Dhruvaraj Subhashchandran <dhruvaraj@in.i

Validate changes to default settings.

Resolves openbmc/openbmc#1771

Change-Id: I763e811e88710425131ec504ff933e3c41c458e6
Signed-off-by: Dhruvaraj Subhashchandran <dhruvaraj@in.ibm.com>

show more ...

Fix to allow multiple properties per interface

The path variable needs to be shared among all properties
in an interface

Resolves openbmc/openbmc#1910

Change-Id: I73f85

Fix to allow multiple properties per interface

The path variable needs to be shared among all properties
in an interface

Resolves openbmc/openbmc#1910

Change-Id: I73f85ef9fd36eb8110f3f352fb968f062585c3d9
Signed-off-by: Andrew Geissler <andrewg@us.ibm.com>

show more ...

Persist changes to settings

Persist changes made to settings, if any, such that those changes can be
restored upon a reboot.

Use Cereal for serialization of the settings' proper

Persist changes to settings

Persist changes made to settings, if any, such that those changes can be
restored upon a reboot.

Use Cereal for serialization of the settings' properties. Since the
settings code is generated based on a system specific settings policy,
generate the serialization code as well such that only relevant settings
are serialized.

Resolves openbmc/openbmc#1764.

Change-Id: Id8bd84a9455cf4348b22f255d038b050d004eb7c
Signed-off-by: Deepak Kodihalli <dkodihal@in.ibm.com>

show more ...

Fix bug in mako template

Fix a bug in the settings manager mako template, which was causing
some of the settings manager code (header includes and using namespaces)
to not be generat

Fix bug in mako template

Fix a bug in the settings manager mako template, which was causing
some of the settings manager code (header includes and using namespaces)
to not be generated appropriately.

Change-Id: Ie55fb2f0d637a842dd59148fefe4e3ed6aa75808
Signed-off-by: Deepak Kodihalli <dkodihal@in.ibm.com>

show more ...