regs: Use new compatible interface

Enhance the phosphor-regulators application to use the new D-Bus
interface xyz.openbmc_project.Inventory.Decorator.Compatible.

The list of compatible system type

regs: Use new compatible interface

Enhance the phosphor-regulators application to use the new D-Bus
interface xyz.openbmc_project.Inventory.Decorator.Compatible.

The list of compatible system type names from this interface is used to
find the configuration file for the current system.

Rename the configuration files to match the system type names in the new
D-Bus interface.

Tested:
* Verified phosphor-regulators loaded correct config file
* When interface was available before app started
* When interface was available after app started
* When interface was available after configure action started
* When interface was never available but default config file exists
* On Rainier, Everest, and Fuji systems
* Verified system could be powered on and off without error
* Verified app waited up to 5 minutes during configure action for
interface to become available. Verified critical error logged and
power on failed if interface not found within 5 minutes.

Change-Id: Icee0c59566c68730ca318fc4521f05af2546eed1
Signed-off-by: Shawn McCarney <shawnmm@us.ibm.com>

show more ...

regulators: Initial BlueRidge config file

Create the initial voltage regulator JSON configuration file for
BlueRidge systems.

Tested:
* Ran JSON validation tool
* Set up BlueRidge simulation enviro

regulators: Initial BlueRidge config file

Create the initial voltage regulator JSON configuration file for
BlueRidge systems.

Tested:
* Ran JSON validation tool
* Set up BlueRidge simulation environment
* Verified regulators application found and loaded the file
* Powered chassis on and off and verified no errors were logged

Change-Id: I05a868f7656f76de8543683e9c9e14eaa3d4b70b
Signed-off-by: Shawn McCarney <shawnmm@us.ibm.com>

show more ...

regulators: Initial Fuji config file

Create the initial voltage regulator JSON configuration file for Fuji
systems.

Tested:
* Ran JSON validation tool
* Set up Fuji simulation environment
* Verifie

regulators: Initial Fuji config file

Create the initial voltage regulator JSON configuration file for Fuji
systems.

Tested:
* Ran JSON validation tool
* Set up Fuji simulation environment
* Verified regulators application found and loaded the file
* Powered chassis on and off and verified no errors were logged

Change-Id: I34c22e365f084836c66e8b30df4612b0d5fb2bb8
Signed-off-by: Shawn McCarney <shawnmm@us.ibm.com>

show more ...

prettier: re-format

Prettier is enabled in openbmc-build-scripts on Markdown, JSON, and YAML
files to have consistent formatting for these file types. Re-run the
formatter on the whole repository.

prettier: re-format

Prettier is enabled in openbmc-build-scripts on Markdown, JSON, and YAML
files to have consistent formatting for these file types. Re-run the
formatter on the whole repository.

Change-Id: I53dc3bb17d5dcbb9b33fa3d0db62138f37cc8c0b
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>

show more ...

regulators: Initial Bonnell config file

Create an initial version of the voltage regulators JSON configuration
file for Bonnell systems.

The file contains the minimum required structure plus some g

regulators: Initial Bonnell config file

Create an initial version of the voltage regulators JSON configuration
file for Bonnell systems.

The file contains the minimum required structure plus some general rules
that will likely be used in subsequent commits.

This minimal file is enough for Bonnell hardware bring-up. No voltage
regulator configuration or monitoring will occur. The regulators will
power on with their default register values.

Testing:
* Ran validation tool
* Started Rainier 2S2U simulation session
* Modified EntityManager data so that system appeared to be a Bonnell
* Tested that file was found and loaded successfully
* Tested that chassis powered on successfully with no errors logged

Signed-off-by: Shawn McCarney <shawnmm@us.ibm.com>
Change-Id: I30309e3096401c5464ae1bff75334491e2bc00d7

show more ...

regulators: Add rules and devices to Rainier JSON

Add rules and devices to the Rainier JSON voltage regulator
configuration file.

The JSON rule objects define sequences of actions to configure and

regulators: Add rules and devices to Rainier JSON

Add rules and devices to the Rainier JSON voltage regulator
configuration file.

The JSON rule objects define sequences of actions to configure and read
sensors from Rainier voltage regulators.

The JSON device objects define the regulator devices and what rules
should be run to configure and monitor them.

Signed-off-by: Shawn McCarney <shawnmm@us.ibm.com>
Change-Id: I07210080e67131c157806235baf7be4b7c33f9fd

show more ...

regulators: Add inventory_path to JSON chassis obj

Add the property "inventory_path" to the "chassis" object in the JSON
configuration file.

This property will be used to create the required D-Bus

regulators: Add inventory_path to JSON chassis obj

Add the property "inventory_path" to the "chassis" object in the JSON
configuration file.

This property will be used to create the required D-Bus association
between a voltage regulator sensor and the chassis that contains it.
This association is required by the Redfish support.

Long term, this new property will be required. That is how it is
documented in the updated version of chassis.md.

However, it will be temporarily optional in the JSON schema and the C++
configuration file parser. This temporary measure will be removed once
all known JSON configuration files have been updated to specify the new
property.

Signed-off-by: Shawn McCarney <shawnmm@us.ibm.com>
Change-Id: I45f5e8ec86be7672a33099c94c35328862ffe11b

show more ...

regulators: Initial JSON config file for Everest

Create an initial JSON configuration file for IBM Everest systems. File
does not yet contain any device information.

Signed-off-by: Shawn McCarney

regulators: Initial JSON config file for Everest

Create an initial JSON configuration file for IBM Everest systems. File
does not yet contain any device information.

Signed-off-by: Shawn McCarney <shawnmm@us.ibm.com>
Change-Id: I1cf0b0843145c3190d780d190e6ef0cdd5150b16

show more ...

regulators: Initial JSON config file for Rainier

Create an initial JSON configuration file for IBM Rainier systems. File
does not yet contain any device information.

Also delete the '.keep' file t

regulators: Initial JSON config file for Rainier

Create an initial JSON configuration file for IBM Rainier systems. File
does not yet contain any device information.

Also delete the '.keep' file that existed solely to allow the
'config_files' directory to exist. git does not allow empty
directories.

Signed-off-by: Shawn McCarney <shawnmm@us.ibm.com>
Change-Id: Ie53350ee3e7c94f551a59e608b90690189781a23

show more ...

regulators: Add/install config files

Add a `config_files` directory to contain all JSON configuration files
and install all directories/files it contains to
`/usr/share/phosphor-regulators/`.

Teste

regulators: Add/install config files

Add a `config_files` directory to contain all JSON configuration files
and install all directories/files it contains to
`/usr/share/phosphor-regulators/`.

Tested:
All directories/files contained are installed
Installed configs are in /usr/share/phosphor-regulators

Signed-off-by: Matthew Barth <msbarth@us.ibm.com>
Change-Id: I3d67adcd12dd5e05ea333001e9dbb023957551b4

show more ...