pseq: Use more concise bracketing style in config

Per previous review suggestion and to improve readability, use a more
concise bracketing style in configuration files.

Signed-off-by: Jim Wright <j

pseq: Use more concise bracketing style in config

Per previous review suggestion and to improve readability, use a more
concise bracketing style in configuration files.

Signed-off-by: Jim Wright <jlwright@us.ibm.com>
Change-Id: I1dc8d97c7251eb49e8c13c71c4a33a67d315f7a0

show more ...

prettier: re-format

Prettier is enabled in openbmc-build-scripts on Markdown, JSON, and YAML
files to have consistent formatting for these file types. Re-run the
formatter on the whole repository.

prettier: re-format

Prettier is enabled in openbmc-build-scripts on Markdown, JSON, and YAML
files to have consistent formatting for these file types. Re-run the
formatter on the whole repository.

Change-Id: I53dc3bb17d5dcbb9b33fa3d0db62138f37cc8c0b
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>

show more ...

pseq: Add presence checking

As a circumvention for hardware problems, it can be necessary to check
for device presence in order to prevent calling out not present
components. Add the ability to conf

pseq: Add presence checking

As a circumvention for hardware problems, it can be necessary to check
for device presence in order to prevent calling out not present
components. Add the ability to configure presence checking in the PSEQ
configuration files and use presence, when configured, in problem
determination.

Signed-off-by: Jim Wright <jlwright@us.ibm.com>
Change-Id: Ia9d8ee57f2d643f61ece45d9c03d523b891e98b8

show more ...

pseq: Add digital monitor rails to voltage fault

In order to provide better isolation prioritization and increase failure
data captured, add the digital monitor (dmon) rails to voltage fault
monitor

pseq: Add digital monitor rails to voltage fault

In order to provide better isolation prioritization and increase failure
data captured, add the digital monitor (dmon) rails to voltage fault
monitoring.

Signed-off-by: Jim Wright <jlwright@us.ibm.com>
Change-Id: I82dcee920044c083dd8c1a7c8fa24b6455143582

show more ...

pseq: Remove disconnected Rainier system GPIO pins

Per engineering updates, remove disconnected GPIO pins from Rainier
configuration file. This will prevent incorrect isolation of power good
failure

pseq: Remove disconnected Rainier system GPIO pins

Per engineering updates, remove disconnected GPIO pins from Rainier
configuration file. This will prevent incorrect isolation of power good
failures.

Signed-off-by: Jim Wright <jlwright@us.ibm.com>
Change-Id: I6fe74d7bcde4474acc1c00171c7b4767b65b1eb1

show more ...

pseq: Cleanup Rainier config file pin entries

Remove from the Rainier config file the pins which do not factor into
the overall chassis power good. The PCIE slot pins do not represent a
power good f

pseq: Cleanup Rainier config file pin entries

Remove from the Rainier config file the pins which do not factor into
the overall chassis power good. The PCIE slot pins do not represent a
power good fail. The software pgood pin has been removed from current
system documentation. The individual PSU pgoods will be monitored by the
power supply application.

Signed-off-by: Jim Wright <jlwright@us.ibm.com>
Change-Id: Id2ecb4eb2aee8048737a048b0ba45a1b48711334

show more ...

pseq: Add Rainier configuration file

Signed-off-by: Jim Wright <jlwright@us.ibm.com>
Change-Id: Ib7caad4766bb80835c2cbe76a7854f5c48dae553