Fix spelling mistakes using codespell

This commit corrects various spelling mistakes throughout the
repository. The corrections were made automatically using `codespell`[1]
tool.

[1]: https://githu

Fix spelling mistakes using codespell

This commit corrects various spelling mistakes throughout the
repository. The corrections were made automatically using `codespell`[1]
tool.

[1]: https://github.com/codespell-project/codespell

Change-Id: I7ddcf61ed2d596171384fdb5f0fc1e2feb4240bf
Signed-off-by: Manojkiran Eda <manojkiran.eda@gmail.com>

show more ...

Adding num key parsing

Currently there is only support for an alphanumeric references that is
decoded into a pin number. The "num" keyword supports using the pin
number directly (integer). The JSON

Adding num key parsing

Currently there is only support for an alphanumeric references that is
decoded into a pin number. The "num" keyword supports using the pin
number directly (integer). The JSON key field determines the parsing.

It matches the support for the "num" keyword for the gpio_defs.json
seen in skeleton/libobmc_intf. If added along with:

https://gerrit.openbmc.org/c/openbmc/skeleton/+/68883

then "num" could be used for systems that have numerically labeled GPIO
pins and have multiple GPIO banks.

Change-Id: Ibf3e432a36c60b650c7f245ee12e5af3a8359664
Signed-off-by: Jonico Eustaquio <jonico.eustaquio@fii-na.com>

show more ...

Add warm-reboot option support for reset button

Pressing reset button currently issues a reboot transion. However, some
platforms might expect to have force warm reboot instead. This commit
adds new

Add warm-reboot option support for reset button

Pressing reset button currently issues a reboot transion. However, some
platforms might expect to have force warm reboot instead. This commit
adds new reset-button-do-warm-reboot option to configure the expected
action for reset button on those platforms.

Tested:
- By default, on release of reset button, the Host is powered cycle.
- Enable reset-button-do-warm-reboot meson option. On release of reset
button, the Host is reset while Host power does not change.

Change-Id: I5d5f754f8b848fa0faef97354ef0dab7c47645f4
Signed-off-by: HuyLe <hule@amperecomputing.com>

show more ...

Describe button behavior in the README

Explain what the various button presses do.

Change-Id: I0811e4cd08da0ae9849688d095107950a4d9f1b8
Signed-off-by: Matt Spinler <spinler@us.ibm.com>

Support host selector using cpld definitions

Description:
- Support host selector using cpld definitions

Design:
- Because the current structure only supports config defined by GPIO
(Yosemite V2)

Support host selector using cpld definitions

Description:
- Support host selector using cpld definitions

Design:
- Because the current structure only supports config defined by GPIO
(Yosemite V2), but there are also have the system (Yosemite V3.5)
gets the host-selector's selection from CPLD.

- So this commit is to extend the current configuration to use CPLD
definitions. Also, support adding event io from the register file
which was exported from the CLD driver.

- For example with config json below:
{
"cpld_definitions": [
{
"name": "HOST_SELECTOR",
"i2c_address": 15,
"i2c_bus": 12,
"register_name": "uart-selection-debug-card",
"max_position": 4
}
]
}

Dependency:
- CLD driver is required (link: https://lore.kernel.org/lkml/20230117094425.19004-1-Delphine_CC_Chiu@Wiwynn.com/)

Test Case:
- When ocp debug card uart button is pressed the position property on
dbus is correct.

Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Change-Id: I6746afa6d905bd3c681e2921c643b3cd4cb9944c

show more ...

markdownlint: fix all warnings

Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I7e544b426f83fb62a2b5637feb0b7df573dc02d2

prettier: re-format

Prettier is enabled in openbmc-build-scripts on Markdown, JSON, and YAML
files to have consistent formatting for these file types. Re-run the
formatter on the whole repository.

prettier: re-format

Prettier is enabled in openbmc-build-scripts on Markdown, JSON, and YAML
files to have consistent formatting for these file types. Re-run the
formatter on the whole repository.

Change-Id: Icdded708a43b0186f80e7391c323f16e345ac5b4
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>

show more ...

Add serial uart mux interface class

1. This change adds the multi-host serial uart mux interface class.

In a multi-host system when the host position is changed,
then the serial uart mux is configu

Add serial uart mux interface class

1. This change adds the multi-host serial uart mux interface class.

In a multi-host system when the host position is changed,
then the serial uart mux is configured to enable the
respective host's serial console which is accessed via
OCP debug card.

2. Introduced two new methods in gpio.cpp
setGpioState - set state for gpio fd based on polarity
getGpiostate - get state for gpio fd based on polarity

3. Updated the readme file about details on the new gpio
configs

design : https://github.com/openbmc/docs/blob/master/designs/multihost-phosphor-buttons.md

Testing : This change is verified in yosemiteV2 platform.

Signed-off-by: Naveen Moses <naveen.mosess@hcl.com>
Change-Id: I861d70570650d7dfcab842a35bdcf63a9fdd3bd0

show more ...

Enable group gpio configuration

This change adds support to configure single
as well as group gpio config using a single api(configGroupGpio()).
This change is introduced to support

Enable group gpio configuration

This change adds support to configure single
as well as group gpio config using a single api(configGroupGpio()).
This change is introduced to support the button/input
interfaces which has multiple gpios associated with them.

As an improvement reading of gpio def json file is
done once in main function rather than reading it
everytime before creating the button interface object.

Signed-off-by: Naveen Moses <naveen.mosess@hcl.com>
Change-Id: Ib73dda618c78fd2f14b5d3432fd04c9f4cd2dd9b

show more ...