Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80 |
|
#
eeb4dd9e |
| 22-Nov-2022 |
Tiezhu Yang <yangtiezhu@loongson.cn> |
selftests: rcutorture: Use "grep -E" instead of "egrep"
The latest version of grep is deprecating the egrep command, so that its output contains warnings as follows:
egrep: warning: egrep is obsol
selftests: rcutorture: Use "grep -E" instead of "egrep"
The latest version of grep is deprecating the egrep command, so that its output contains warnings as follows:
egrep: warning: egrep is obsolescent; using grep -E
Fix this using "grep -E" instead.
sed -i "s/egrep/grep -E/g" `grep egrep -rwl tools/testing/selftests/rcutorture`
Here are the steps to install the latest grep:
wget http://ftp.gnu.org/gnu/grep/grep-3.8.tar.gz tar xf grep-3.8.tar.gz cd grep-3.8 && ./configure && make sudo make install export PATH=/usr/local/bin:$PATH
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
show more ...
|
#
3e4c07b9 |
| 20-Nov-2022 |
Paul E. McKenney <paulmck@kernel.org> |
torture: make kvm-find-errors.sh check for compressed vmlinux files
Under some conditions, a given run's vmlinux file will be compressed, so that it is named vmlinux.xz rather than vmlinux. in such
torture: make kvm-find-errors.sh check for compressed vmlinux files
Under some conditions, a given run's vmlinux file will be compressed, so that it is named vmlinux.xz rather than vmlinux. in such cases, kvm-find-errors.sh will complain about the nonexistence of vmlinux. This commit therefore causes kvm-find-errors.sh to check for vmlinux.xz as well as for vmlinux.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
show more ...
|
Revision tags: v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26 |
|
#
00f3133b |
| 24-Feb-2022 |
Paul E. McKenney <paulmck@kernel.org> |
torture: Skip vmlinux check for kvm-again.sh runs
The kvm-again.sh script reruns an previously built set of kernels, so the vmlinux files are associated with that previous run, not this on. This res
torture: Skip vmlinux check for kvm-again.sh runs
The kvm-again.sh script reruns an previously built set of kernels, so the vmlinux files are associated with that previous run, not this on. This results in kvm-find_errors.sh reporting spurious failed-build errors. This commit therefore omits the vmlinux check for kvm-again.sh runs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
show more ...
|
Revision tags: v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16 |
|
#
e31ccc1d |
| 18-Jan-2022 |
Paul E. McKenney <paulmck@kernel.org> |
torture: Make kvm-find-errors.sh notice missing vmlinux file
Currently, an obtuse compiler diagnostic can fool kvm-find-errors.sh into believing that the build was successful. This commit therefore
torture: Make kvm-find-errors.sh notice missing vmlinux file
Currently, an obtuse compiler diagnostic can fool kvm-find-errors.sh into believing that the build was successful. This commit therefore adds a check for a missing vmlinux file. Note that in the case of repeated torture-test scenarios ("--configs '2*TREE01'"), the vmlinux file will only be present in the first directory, that is, in TREE01 but not TREE01.2.
Link: https://lore.kernel.org/lkml/36bd91e4-8eda-5677-7fde-40295932a640@molgen.mpg.de/ Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
show more ...
|
Revision tags: v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2 |
|
#
c06354a1 |
| 10-Nov-2021 |
Paul E. McKenney <paulmck@kernel.org> |
torture: Make kvm-find-errors.sh report link-time undefined symbols
This commit makes kvm-find-errors.sh check for and report undefined symbols that are detected at link time.
Signed-off-by: Paul E
torture: Make kvm-find-errors.sh report link-time undefined symbols
This commit makes kvm-find-errors.sh check for and report undefined symbols that are detected at link time.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
show more ...
|
Revision tags: v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27 |
|
#
226dd39d |
| 25-Mar-2021 |
Paul E. McKenney <paulmck@kernel.org> |
torture: Make kvm-find-errors.sh account for kvm-remote.sh
Currently, kvm-find-errors.sh assumes that if "--buildonly" appears in the log file, then the run did builds but ran no kernels. This brea
torture: Make kvm-find-errors.sh account for kvm-remote.sh
Currently, kvm-find-errors.sh assumes that if "--buildonly" appears in the log file, then the run did builds but ran no kernels. This breaks with kvm-remote.sh, which uses kvm.sh to do a build, then kvm-again.sh to run the kernels built on remote systems. This commit therefore adds a check for a kvm-remote.sh run.
While in the area, this commit checks for "--build-only" as well as "--build-only".
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
show more ...
|
Revision tags: v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14 |
|
#
365dc5cb |
| 20-Dec-2020 |
Paul E. McKenney <paulmck@kernel.org> |
torture: Simplify exit-code plumbing for kvm-recheck.sh and kvm-find-errors.sh
This commit simplifies exit-code plumbing. It makes kvm-recheck.sh return the value 1 for a build error and 2 for a ru
torture: Simplify exit-code plumbing for kvm-recheck.sh and kvm-find-errors.sh
This commit simplifies exit-code plumbing. It makes kvm-recheck.sh return the value 1 for a build error and 2 for a runtime error. It also makes kvm-find-errors.sh avoid checking runtime files for --build-only runs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
show more ...
|
Revision tags: v5.10 |
|
#
23239fc0 |
| 23-Nov-2020 |
Paul E. McKenney <paulmck@kernel.org> |
torture: Make kvm.sh return failure upon build failure
The kvm.sh script uses kvm-find-errors.sh to evaluate whether or not a build failed. Unfortunately, kvm-find-errors.sh returns success if ther
torture: Make kvm.sh return failure upon build failure
The kvm.sh script uses kvm-find-errors.sh to evaluate whether or not a build failed. Unfortunately, kvm-find-errors.sh returns success if there are no failed runs (including when there are no runs at all) even if there are build failures. This commit therefore makes kvm-find-errors.sh return failure in response to build failures.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
show more ...
|
Revision tags: v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4 |
|
#
beabc806 |
| 16-Dec-2019 |
Paul E. McKenney <paulmck@kernel.org> |
rcutorture: Make kvm-find-errors.sh abort on bad directory
Currently, kvm-find-errors.sh gives a usage prompt when given a bad directory, but then soldiers on, giving a series of confusing error mes
rcutorture: Make kvm-find-errors.sh abort on bad directory
Currently, kvm-find-errors.sh gives a usage prompt when given a bad directory, but then soldiers on, giving a series of confusing error messages. This commit therefore prints an error message and exits when given a bad directory, hopefully reducing confusion.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
show more ...
|
Revision tags: v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8 |
|
#
63b29eae |
| 11-Apr-2019 |
Paul E. McKenney <paulmck@linux.ibm.com> |
torture: Make kvm-find-errors.sh and kvm-recheck.sh provide exit status
This commit causes both kvm-find-errors.sh and kvm-recheck.sh to provide an exit status based on whether or not errors were lo
torture: Make kvm-find-errors.sh and kvm-recheck.sh provide exit status
This commit causes both kvm-find-errors.sh and kvm-recheck.sh to provide an exit status based on whether or not errors were located. In the case of kvm-recheck.sh, this will be the error status of the last run. This change allows these commands to be used in scripting and Makefiles to automatically report failed rcutorture runs.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
show more ...
|
Revision tags: v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21 |
|
#
fef141f6 |
| 11-Feb-2019 |
Paul E. McKenney <paulmck@linux.ibm.com> |
tools/.../rcutorture: Convert to SPDX license identifier
Replace the license boiler plate with a SPDX license identifier. While in the area, update an email address and add copyright notices.
Signe
tools/.../rcutorture: Convert to SPDX license identifier
Replace the license boiler plate with a SPDX license identifier. While in the area, update an email address and add copyright notices.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
show more ...
|
Revision tags: v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17 |
|
#
da1a1e19 |
| 19-Apr-2018 |
Paul E. McKenney <paulmck@linux.vnet.ibm.com> |
torture: Make kvm-find-errors.sh find build warnings
Currently, kvm-find-errors.sh looks only for build errors ("error:"), so this commit makes it also locate build warnings ("warning:").
Signed-of
torture: Make kvm-find-errors.sh find build warnings
Currently, kvm-find-errors.sh looks only for build errors ("error:"), so this commit makes it also locate build warnings ("warning:").
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Nicholas Piggin <npiggin@gmail.com>
show more ...
|
Revision tags: v4.16 |
|
#
95ce5f29 |
| 26-Feb-2018 |
Paul E. McKenney <paulmck@linux.vnet.ibm.com> |
torture: Add a script to edit output from failed runs
This commit adds a script that allows viewing the build and/or console output from failed rcutorture, locktorture, or rcuperf runs. This replace
torture: Add a script to edit output from failed runs
This commit adds a script that allows viewing the build and/or console output from failed rcutorture, locktorture, or rcuperf runs. This replaces a time-honored but inefficient manual procedure that uses cut and paste.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Nicholas Piggin <npiggin@gmail.com>
show more ...
|
Revision tags: v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4 |
|
#
beabc806 |
| 16-Dec-2019 |
Paul E. McKenney <paulmck@kernel.org> |
rcutorture: Make kvm-find-errors.sh abort on bad directory Currently, kvm-find-errors.sh gives a usage prompt when given a bad directory, but then soldiers on, giving a series of confusi
rcutorture: Make kvm-find-errors.sh abort on bad directory Currently, kvm-find-errors.sh gives a usage prompt when given a bad directory, but then soldiers on, giving a series of confusing error messages. This commit therefore prints an error message and exits when given a bad directory, hopefully reducing confusion. Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
show more ...
|
Revision tags: v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8 |
|
#
63b29eae |
| 11-Apr-2019 |
Paul E. McKenney <paulmck@linux.ibm.com> |
torture: Make kvm-find-errors.sh and kvm-recheck.sh provide exit status This commit causes both kvm-find-errors.sh and kvm-recheck.sh to provide an exit status based on whether or not er
torture: Make kvm-find-errors.sh and kvm-recheck.sh provide exit status This commit causes both kvm-find-errors.sh and kvm-recheck.sh to provide an exit status based on whether or not errors were located. In the case of kvm-recheck.sh, this will be the error status of the last run. This change allows these commands to be used in scripting and Makefiles to automatically report failed rcutorture runs. Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
show more ...
|
Revision tags: v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21 |
|
#
fef141f6 |
| 11-Feb-2019 |
Paul E. McKenney <paulmck@linux.ibm.com> |
tools/.../rcutorture: Convert to SPDX license identifier Replace the license boiler plate with a SPDX license identifier. While in the area, update an email address and add copyright not
tools/.../rcutorture: Convert to SPDX license identifier Replace the license boiler plate with a SPDX license identifier. While in the area, update an email address and add copyright notices. Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
show more ...
|
Revision tags: v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17 |
|
#
da1a1e19 |
| 19-Apr-2018 |
Paul E. McKenney <paulmck@linux.vnet.ibm.com> |
torture: Make kvm-find-errors.sh find build warnings Currently, kvm-find-errors.sh looks only for build errors ("error:"), so this commit makes it also locate build warnings ("warning:")
torture: Make kvm-find-errors.sh find build warnings Currently, kvm-find-errors.sh looks only for build errors ("error:"), so this commit makes it also locate build warnings ("warning:"). Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Nicholas Piggin <npiggin@gmail.com>
show more ...
|
Revision tags: v4.16 |
|
#
95ce5f29 |
| 26-Feb-2018 |
Paul E. McKenney <paulmck@linux.vnet.ibm.com> |
torture: Add a script to edit output from failed runs This commit adds a script that allows viewing the build and/or console output from failed rcutorture, locktorture, or rcuperf runs.
torture: Add a script to edit output from failed runs This commit adds a script that allows viewing the build and/or console output from failed rcutorture, locktorture, or rcuperf runs. This replaces a time-honored but inefficient manual procedure that uses cut and paste. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Nicholas Piggin <npiggin@gmail.com>
show more ...
|