selftests/powerpc: Add matrix multiply assist (MMA) test

Adds a simple test of some basic matrix multiply assist (MMA)
instructions.

Signed-off-by: Alistair Popple <alistair@popple.id.au>
Tested-by

selftests/powerpc: Add matrix multiply assist (MMA) test

Adds a simple test of some basic matrix multiply assist (MMA)
instructions.

Signed-off-by: Alistair Popple <alistair@popple.id.au>
Tested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200622021832.15870-1-alistair@popple.id.au

show more ...

selftests/powerpc: Skip vmx/vsx/tar/etc tests on older CPUs

Some of our tests use VSX or newer VMX instructions, so need to be
skipped on older CPUs to avoid SIGILL'ing.

Similarly TAR was added in

selftests/powerpc: Skip vmx/vsx/tar/etc tests on older CPUs

Some of our tests use VSX or newer VMX instructions, so need to be
skipped on older CPUs to avoid SIGILL'ing.

Similarly TAR was added in v2.07, and the PMU event used in the stcx
fail test only works on Power8 or later.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200803020719.96114-1-mpe@ellerman.id.au

show more ...

selftests/powerpc: Add FPU denormal test

Add a testcase that tries to trigger the FPU denormal exception on
Power8 or earlier CPUs.

Prior to commit 4557ac6b344b ("powerpc/64s/exception: Fix 0x1500

selftests/powerpc: Add FPU denormal test

Add a testcase that tries to trigger the FPU denormal exception on
Power8 or earlier CPUs.

Prior to commit 4557ac6b344b ("powerpc/64s/exception: Fix 0x1500
interrupt handler crash") this would trigger a crash such as:

Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA PowerNV
Modules linked in: iptable_mangle xt_MASQUERADE iptable_nat nf_nat xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ipt_REJECT nf_reject_ipv4 xt_tcpudp tun bridge stp llc ip6table_filter ip6_tables iptable_filter fuse kvm_hv binfmt_misc squashfs mlx4_ib ib_uverbs dm_multipath scsi_dh_rdac scsi_dh_alua ib_core mlx4_en sr_mod cdrom bnx2x lpfc mlx4_core crc_t10dif scsi_transport_fc sg mdio vmx_crypto crct10dif_vpmsum leds_powernv powernv_rng rng_core led_class powernv_op_panel sunrpc ip_tables x_tables autofs4
CPU: 159 PID: 6854 Comm: fpu_denormal Not tainted 5.8.0-rc2-gcc-8.2.0-00092-g4ec7aaab0828 #192
NIP: c0000000000100ec LR: c00000000001b85c CTR: 0000000000000000
REGS: c000001dd818f770 TRAP: 1500 Not tainted (5.8.0-rc2-gcc-8.2.0-00092-g4ec7aaab0828)
MSR: 900000000290b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24002884 XER: 20000000
CFAR: c00000000001005c IRQMASK: 1
GPR00: c00000000001c4c8 c000001dd818fa00 c00000000171c200 c000001dd8101570
GPR04: 0000000000000000 c000001dd818fe90 c000001dd8101590 000000000000001d
GPR08: 0000000000000010 0000000000002000 c000001dd818fe90 fffffffffc48ac60
GPR12: 0000000000002200 c000001ffff4f480 0000000000000000 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000000000000 00007fffab225b40 0000000000000001 c000000001757168
GPR24: c000001dd8101570 c0000018027b00f0 c000001dd8101570 c000000001496098
GPR28: c00000000174ad05 c000001dd8100000 c000001dd8100000 c000001dd8100000
NIP save_fpu+0xa8/0x2ac
LR __giveup_fpu+0x2c/0xd0
Call Trace:
0xc000001dd818fa80 (unreliable)
giveup_all+0x118/0x120
__switch_to+0x124/0x6c0
__schedule+0x390/0xaf0
do_task_dead+0x70/0x80
do_exit+0x8fc/0xe10
do_group_exit+0x64/0xd0
sys_exit_group+0x24/0x30
system_call_exception+0x164/0x270
system_call_common+0xf0/0x278

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Split out of fix patch, add oops log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200708074942.1713396-1-npiggin@gmail.com

show more ...

selftests/powerpc: Fix Makefiles for headers_install change

Commit b2d35fa5fc80 ("selftests: add headers_install to lib.mk")
introduced a requirement that Makefiles more than one level below the
sel

selftests/powerpc: Fix Makefiles for headers_install change

Commit b2d35fa5fc80 ("selftests: add headers_install to lib.mk")
introduced a requirement that Makefiles more than one level below the
selftests directory need to define top_srcdir, but it didn't update
any of the powerpc Makefiles.

This broke building all the powerpc selftests with eg:

make[1]: Entering directory '/src/linux/tools/testing/selftests/powerpc'
BUILD_TARGET=/src/linux/tools/testing/selftests/powerpc/alignment; mkdir -p $BUILD_TARGET; make OUTPUT=$BUILD_TARGET -k -C alignment all
make[2]: Entering directory '/src/linux/tools/testing/selftests/powerpc/alignment'
../../lib.mk:20: ../../../../scripts/subarch.include: No such file or directory
make[2]: *** No rule to make target '../../../../scripts/subarch.include'.
make[2]: Failed to remake makefile '../../../../scripts/subarch.include'.
Makefile:38: recipe for target 'alignment' failed

Fix it by setting top_srcdir in the affected Makefiles.

Fixes: b2d35fa5fc80 ("selftests: add headers_install to lib.mk")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

show more ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

selftests/powerpc: Fix remaining fallout from recent changes

In benchmarks we need to use $(TEST_GEN_PROGS) after we include lib.mk,
because lib.mk does the substitution to add $(OUTPUT).

In math t

selftests/powerpc: Fix remaining fallout from recent changes

In benchmarks we need to use $(TEST_GEN_PROGS) after we include lib.mk,
because lib.mk does the substitution to add $(OUTPUT).

In math the vmx and fpu names were typoed so they no longer matched
correctly, put back the 'v' and 'f'.

In tm we need to substitute $(OUTPUT) into SIGNAL_CONTEXT_CHK_TESTS so
that the rule matches.

In pmu there is an extraneous ':' on the end of $$BUILD_TARGET for the
clean and install rules, which breaks the logic in the child Makefiles.

Fixes: a8ba798bc8ec ("selftests: enable O and KBUILD_OUTPUT")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>

show more ...

selftests: enable O and KBUILD_OUTPUT

Enable O and KBUILD_OUTPUT for kselftest. User could compile kselftest
to another directory by passing O or KBUILD_OUTPUT. And O is high
priority than KBUILD_OU

selftests: enable O and KBUILD_OUTPUT

Enable O and KBUILD_OUTPUT for kselftest. User could compile kselftest
to another directory by passing O or KBUILD_OUTPUT. And O is high
priority than KBUILD_OUTPUT.

Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>

show more ...

selftests: remove duplicated all and clean target

Currently, kselftest use TEST_PROGS, TEST_PROGS_EXTENDED, TEST_FILES to
indicate the test program, extended test program and test files. It is
easy

selftests: remove duplicated all and clean target

Currently, kselftest use TEST_PROGS, TEST_PROGS_EXTENDED, TEST_FILES to
indicate the test program, extended test program and test files. It is
easy to understand the purpose of these files. But mix of compiled and
uncompiled files lead to duplicated "all" and "clean" targets.

In order to remove the duplicated targets, introduce TEST_GEN_PROGS,
TEST_GEN_PROGS_EXTENDED, TEST_GEN_FILES to indicate the compiled
objects.

Also, the later patch will make use of TEST_GEN_XXX to redirect these
files to output directory indicated by KBUILD_OUTPUT or O.

And add this changes to "Contributing new tests(details)" of
Documentation/kselftest.txt.

Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>

show more ...

selftests/powerpc: Check for VSX preservation across userspace preemption

Ensure the kernel correctly switches VSX registers correctly. VSX
registers are all volatile, and despite the kernel preserv

selftests/powerpc: Check for VSX preservation across userspace preemption

Ensure the kernel correctly switches VSX registers correctly. VSX
registers are all volatile, and despite the kernel preserving VSX
across syscalls, it doesn't have to. Test that during interrupts and
timeslices ending the VSX regs remain the same.

Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

show more ...

selftests/powerpc: Test FPU and VMX regs in signal ucontext

Load up the non volatile FPU and VMX regs and ensure that they are the
expected value in a signal handler

Signed-off-by: Cyril Bur <cyril

selftests/powerpc: Test FPU and VMX regs in signal ucontext

Load up the non volatile FPU and VMX regs and ensure that they are the
expected value in a signal handler

Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

show more ...

selftests/powerpc: Test preservation of FPU and VMX regs across preemption

Loop in assembly checking the registers with many threads.

Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Mi

selftests/powerpc: Test preservation of FPU and VMX regs across preemption

Loop in assembly checking the registers with many threads.

Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

show more ...

selftests/powerpc: Test the preservation of FPU and VMX regs across syscall

Test that the non volatile floating point and Altivec registers get
correctly preserved across the fork() syscall.

fork()

selftests/powerpc: Test the preservation of FPU and VMX regs across syscall

Test that the non volatile floating point and Altivec registers get
correctly preserved across the fork() syscall.

fork() works nicely for this purpose, the registers should be the same for
both parent and child

Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
[mpe: Add include guards to basic_asm.h, minor formatting]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

show more ...

selftests/powerpc: Skip vmx/vsx/tar/etc tests on older CPUs

Some of our tests use VSX or newer VMX instructions, so need to be
skipped on older CPUs to avoid SIGILL'ing.

Similar

selftests/powerpc: Skip vmx/vsx/tar/etc tests on older CPUs

Some of our tests use VSX or newer VMX instructions, so need to be
skipped on older CPUs to avoid SIGILL'ing.

Similarly TAR was added in v2.07, and the PMU event used in the stcx
fail test only works on Power8 or later.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200803020719.96114-1-mpe@ellerman.id.au

show more ...

selftests/powerpc: Add FPU denormal test

Add a testcase that tries to trigger the FPU denormal exception on
Power8 or earlier CPUs.

Prior to commit 4557ac6b344b ("powerpc/64s/ex

selftests/powerpc: Add FPU denormal test

Add a testcase that tries to trigger the FPU denormal exception on
Power8 or earlier CPUs.

Prior to commit 4557ac6b344b ("powerpc/64s/exception: Fix 0x1500
interrupt handler crash") this would trigger a crash such as:

Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA PowerNV
Modules linked in: iptable_mangle xt_MASQUERADE iptable_nat nf_nat xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ipt_REJECT nf_reject_ipv4 xt_tcpudp tun bridge stp llc ip6table_filter ip6_tables iptable_filter fuse kvm_hv binfmt_misc squashfs mlx4_ib ib_uverbs dm_multipath scsi_dh_rdac scsi_dh_alua ib_core mlx4_en sr_mod cdrom bnx2x lpfc mlx4_core crc_t10dif scsi_transport_fc sg mdio vmx_crypto crct10dif_vpmsum leds_powernv powernv_rng rng_core led_class powernv_op_panel sunrpc ip_tables x_tables autofs4
CPU: 159 PID: 6854 Comm: fpu_denormal Not tainted 5.8.0-rc2-gcc-8.2.0-00092-g4ec7aaab0828 #192
NIP: c0000000000100ec LR: c00000000001b85c CTR: 0000000000000000
REGS: c000001dd818f770 TRAP: 1500 Not tainted (5.8.0-rc2-gcc-8.2.0-00092-g4ec7aaab0828)
MSR: 900000000290b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24002884 XER: 20000000
CFAR: c00000000001005c IRQMASK: 1
GPR00: c00000000001c4c8 c000001dd818fa00 c00000000171c200 c000001dd8101570
GPR04: 0000000000000000 c000001dd818fe90 c000001dd8101590 000000000000001d
GPR08: 0000000000000010 0000000000002000 c000001dd818fe90 fffffffffc48ac60
GPR12: 0000000000002200 c000001ffff4f480 0000000000000000 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000000000000 00007fffab225b40 0000000000000001 c000000001757168
GPR24: c000001dd8101570 c0000018027b00f0 c000001dd8101570 c000000001496098
GPR28: c00000000174ad05 c000001dd8100000 c000001dd8100000 c000001dd8100000
NIP save_fpu+0xa8/0x2ac
LR __giveup_fpu+0x2c/0xd0
Call Trace:
0xc000001dd818fa80 (unreliable)
giveup_all+0x118/0x120
__switch_to+0x124/0x6c0
__schedule+0x390/0xaf0
do_task_dead+0x70/0x80
do_exit+0x8fc/0xe10
do_group_exit+0x64/0xd0
sys_exit_group+0x24/0x30
system_call_exception+0x164/0x270
system_call_common+0xf0/0x278

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Split out of fix patch, add oops log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200708074942.1713396-1-npiggin@gmail.com

show more ...

selftests/powerpc: Fix Makefiles for headers_install change

Commit b2d35fa5fc80 ("selftests: add headers_install to lib.mk")
introduced a requirement that Makefiles more than one level b

selftests/powerpc: Fix Makefiles for headers_install change

Commit b2d35fa5fc80 ("selftests: add headers_install to lib.mk")
introduced a requirement that Makefiles more than one level below the
selftests directory need to define top_srcdir, but it didn't update
any of the powerpc Makefiles.

This broke building all the powerpc selftests with eg:

make[1]: Entering directory '/src/linux/tools/testing/selftests/powerpc'
BUILD_TARGET=/src/linux/tools/testing/selftests/powerpc/alignment; mkdir -p $BUILD_TARGET; make OUTPUT=$BUILD_TARGET -k -C alignment all
make[2]: Entering directory '/src/linux/tools/testing/selftests/powerpc/alignment'
../../lib.mk:20: ../../../../scripts/subarch.include: No such file or directory
make[2]: *** No rule to make target '../../../../scripts/subarch.include'.
make[2]: Failed to remake makefile '../../../../scripts/subarch.include'.
Makefile:38: recipe for target 'alignment' failed

Fix it by setting top_srcdir in the affected Makefiles.

Fixes: b2d35fa5fc80 ("selftests: add headers_install to lib.mk")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

show more ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

selftests/powerpc: Fix remaining fallout from recent changes

In benchmarks we need to use $(TEST_GEN_PROGS) after we include lib.mk,
because lib.mk does the substitution to add $(OUTPUT)

selftests/powerpc: Fix remaining fallout from recent changes

In benchmarks we need to use $(TEST_GEN_PROGS) after we include lib.mk,
because lib.mk does the substitution to add $(OUTPUT).

In math the vmx and fpu names were typoed so they no longer matched
correctly, put back the 'v' and 'f'.

In tm we need to substitute $(OUTPUT) into SIGNAL_CONTEXT_CHK_TESTS so
that the rule matches.

In pmu there is an extraneous ':' on the end of $$BUILD_TARGET for the
clean and install rules, which breaks the logic in the child Makefiles.

Fixes: a8ba798bc8ec ("selftests: enable O and KBUILD_OUTPUT")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>

show more ...

selftests: enable O and KBUILD_OUTPUT

Enable O and KBUILD_OUTPUT for kselftest. User could compile kselftest
to another directory by passing O or KBUILD_OUTPUT. And O is high
priorit

selftests: enable O and KBUILD_OUTPUT

Enable O and KBUILD_OUTPUT for kselftest. User could compile kselftest
to another directory by passing O or KBUILD_OUTPUT. And O is high
priority than KBUILD_OUTPUT.

Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>

show more ...

selftests: remove duplicated all and clean target

Currently, kselftest use TEST_PROGS, TEST_PROGS_EXTENDED, TEST_FILES to
indicate the test program, extended test program and test files.

selftests: remove duplicated all and clean target

Currently, kselftest use TEST_PROGS, TEST_PROGS_EXTENDED, TEST_FILES to
indicate the test program, extended test program and test files. It is
easy to understand the purpose of these files. But mix of compiled and
uncompiled files lead to duplicated "all" and "clean" targets.

In order to remove the duplicated targets, introduce TEST_GEN_PROGS,
TEST_GEN_PROGS_EXTENDED, TEST_GEN_FILES to indicate the compiled
objects.

Also, the later patch will make use of TEST_GEN_XXX to redirect these
files to output directory indicated by KBUILD_OUTPUT or O.

And add this changes to "Contributing new tests(details)" of
Documentation/kselftest.txt.

Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>

show more ...

selftests/powerpc: Check for VSX preservation across userspace preemption

Ensure the kernel correctly switches VSX registers correctly. VSX
registers are all volatile, and despite the ke

selftests/powerpc: Check for VSX preservation across userspace preemption

Ensure the kernel correctly switches VSX registers correctly. VSX
registers are all volatile, and despite the kernel preserving VSX
across syscalls, it doesn't have to. Test that during interrupts and
timeslices ending the VSX regs remain the same.

Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

show more ...

selftests/powerpc: Test FPU and VMX regs in signal ucontext

Load up the non volatile FPU and VMX regs and ensure that they are the
expected value in a signal handler

Signed-off-

selftests/powerpc: Test FPU and VMX regs in signal ucontext

Load up the non volatile FPU and VMX regs and ensure that they are the
expected value in a signal handler

Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

show more ...

selftests/powerpc: Test preservation of FPU and VMX regs across preemption

Loop in assembly checking the registers with many threads.

Signed-off-by: Cyril Bur <cyrilbur@gmail.com>

selftests/powerpc: Test preservation of FPU and VMX regs across preemption

Loop in assembly checking the registers with many threads.

Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

show more ...

selftests/powerpc: Test the preservation of FPU and VMX regs across syscall

Test that the non volatile floating point and Altivec registers get
correctly preserved across the fork() sysc

selftests/powerpc: Test the preservation of FPU and VMX regs across syscall

Test that the non volatile floating point and Altivec registers get
correctly preserved across the fork() syscall.

fork() works nicely for this purpose, the registers should be the same for
both parent and child

Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
[mpe: Add include guards to basic_asm.h, minor formatting]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

show more ...