selftests/memory-hotplug: Remove the redundant warning information

Remove the redundant warning information of online_all_offline_memory()
since there is a warning in online_memory_expect_success().

selftests/memory-hotplug: Remove the redundant warning information

Remove the redundant warning information of online_all_offline_memory()
since there is a warning in online_memory_expect_success().

Signed-off-by: Zhao Gongyi <zhaogongyi@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

show more ...

selftests/memory-hotplug: Adjust log info for maintainability

Redirect misleading error message to /dev/null for
offline_memory_expect_success(), And, add an output
for online->offline test.

Signed

selftests/memory-hotplug: Adjust log info for maintainability

Redirect misleading error message to /dev/null for
offline_memory_expect_success(), And, add an output
for online->offline test.

Signed-off-by: Zhao Gongyi <zhaogongyi@huawei.com>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

show more ...

selftests/memory-hotplug: Restore memory before exit

Some momory will be left in offline state when calling
offline_memory_expect_fail() failed. Restore it before exit.

Signed-off-by: Zhao Gongyi <

selftests/memory-hotplug: Restore memory before exit

Some momory will be left in offline state when calling
offline_memory_expect_fail() failed. Restore it before exit.

Signed-off-by: Zhao Gongyi <zhaogongyi@huawei.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

show more ...

selftests/memory-hotplug: Add checking after online or offline

Add checking for online_memory_expect_success()/
offline_memory_expect_success()/offline_memory_expect_fail(), or
the test would exit 0

selftests/memory-hotplug: Add checking after online or offline

Add checking for online_memory_expect_success()/
offline_memory_expect_success()/offline_memory_expect_fail(), or
the test would exit 0 although the functions return 1.

Signed-off-by: Zhao Gongyi <zhaogongyi@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

show more ...

selftests: memory-hotplug: avoid spamming logs with dump_page(), ratio limit hot-remove error test

While the offline memory test obey ratio limit, the same test with
error injection does not and tri

selftests: memory-hotplug: avoid spamming logs with dump_page(), ratio limit hot-remove error test

While the offline memory test obey ratio limit, the same test with
error injection does not and tries to offline all the hotpluggable
memory, spamming system logs with hundreds of thousands of dump_page()
entries, slowing system down (to the point the test itself timesout and
gets terminated) and excessive fs occupation:

...
[ 9784.393354] page:c00c0000007d1b40 refcount:3 mapcount:0 mapping:c0000001fc03e950 index:0xe7b
[ 9784.393355] def_blk_aops
[ 9784.393356] flags: 0x3ffff800002062(referenced|active|workingset|private)
[ 9784.393358] raw: 003ffff800002062 c0000001b9343a68 c0000001b9343a68 c0000001fc03e950
[ 9784.393359] raw: 0000000000000e7b c000000006607b18 00000003ffffffff c00000000490d000
[ 9784.393359] page dumped because: migration failure
[ 9784.393360] page->mem_cgroup:c00000000490d000
[ 9784.393416] migrating pfn 1f46d failed ret:1
...

$ grep "page dumped because: migration failure" /var/log/kern.log | wc -l
2405558

$ ls -la /var/log/kern.log
-rw-r----- 1 syslog adm 2256109539 Jun 30 14:19 /var/log/kern.log

Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

show more ...

selftests: memory-hotplug: return Kselftest Skip code for skipped tests

When memory-hotplug test is skipped because of unmet dependencies and/or
unsupported configuration, it returns non-zero value

selftests: memory-hotplug: return Kselftest Skip code for skipped tests

When memory-hotplug test is skipped because of unmet dependencies and/or
unsupported configuration, it returns non-zero value hich is treated as a
fail by the Kselftest framework. This leads to false negative result even
when the test could not be run.

Change it to return kselftest skip code when a test gets skipped to
clearly report that the test could not be run.

Kselftest framework SKIP code is 4 and the framework prints appropriate
messages to indicate that the test is skipped.

Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>

show more ...

selftests: memory-hotplug: delete RUN_TESTS and EMIT_TESTS overrides

Delete RUN_TESTS and EMIT_TESTS overrides and use common defines in
lib.mk. Common defines work after making the change the test

selftests: memory-hotplug: delete RUN_TESTS and EMIT_TESTS overrides

Delete RUN_TESTS and EMIT_TESTS overrides and use common defines in
lib.mk. Common defines work after making the change the test to run
with ratio=2 as the default mode to be able to invoke the test without
the "-r 2" argument from the common RUN_TESTS and EMIT_TESTS.

The run_full_tests target now calls the test with "-r 10".

Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Reviewed-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Lei.Yang@windriver.com
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>

show more ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

selftests: fix memory-hotplug test

In the memory offline test, the $ration was used with RANDOM as the
possibility to get it offlined, correct it to become the portion of
available removable memory

selftests: fix memory-hotplug test

In the memory offline test, the $ration was used with RANDOM as the
possibility to get it offlined, correct it to become the portion of
available removable memory blocks.

Also ask the tool to try to offline the next available memory block
if the attempt is unsuccessful. It will only fail if all removable
memory blocks are busy.

A nice example:
$ sudo ./test.sh
Test scope: 10% hotplug memory
online all hot-pluggable memory in offline state:
SKIPPED - no hot-pluggable memory in offline state
offline 10% hot-pluggable memory in online state
trying to offline 3 out of 28 memory block(s):
online->offline memory1
online->offline memory10
./test.sh: line 74: echo: write error: Resource temporarily unavailable
offline_memory_expect_success 10: unexpected fail
online->offline memory100
online->offline memory101
online all hot-pluggable memory in offline state:
offline->online memory1
offline->online memory100
offline->online memory101
skip extra tests: debugfs is not mounted
$ echo $?
0

Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>

show more ...

selftests: add missing test name in memory-hotplug test

There is no prompt for testing memory notifier error injection,
added with the same echo format of other tests above.

Signed-off-by: Po-Hsu L

selftests: add missing test name in memory-hotplug test

There is no prompt for testing memory notifier error injection,
added with the same echo format of other tests above.

Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>

show more ...

selftests: check percentage range for memory-hotplug test

Check the precentage range for -r flag in memory-hotplug test.

Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Shuah Kh

selftests: check percentage range for memory-hotplug test

Check the precentage range for -r flag in memory-hotplug test.

Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>

show more ...

selftests: check hot-pluggagble memory for memory-hotplug test

Check for hot-pluggable memory availability in prerequisite() of the
memory-hotplug test.

Signed-off-by: Po-Hsu Lin <po-hsu.lin@canoni

selftests: check hot-pluggagble memory for memory-hotplug test

Check for hot-pluggable memory availability in prerequisite() of the
memory-hotplug test.

Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>

show more ...

selftests: typo correction for memory-hotplug test

Typo fixed for hotpluggable_offline_memory() in memory-hotplug test.

Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Shuah Kha

selftests: typo correction for memory-hotplug test

Typo fixed for hotpluggable_offline_memory() in memory-hotplug test.

Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>

show more ...

selftests: Change memory on-off-test.sh name to be unique

cpu and memory hotplug scripts use the same name. Change
memory on-off-test.sh to mem-on-off-test.sh.

Signed-off-by: Shuah Khan <shuahkh@os

selftests: Change memory on-off-test.sh name to be unique

cpu and memory hotplug scripts use the same name. Change
memory on-off-test.sh to mem-on-off-test.sh.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

selftests: memory-hotplug: return Kselftest Skip code for skipped tests

When memory-hotplug test is skipped because of unmet dependencies and/or
unsupported configuration, it returns non

selftests: memory-hotplug: return Kselftest Skip code for skipped tests

When memory-hotplug test is skipped because of unmet dependencies and/or
unsupported configuration, it returns non-zero value hich is treated as a
fail by the Kselftest framework. This leads to false negative result even
when the test could not be run.

Change it to return kselftest skip code when a test gets skipped to
clearly report that the test could not be run.

Kselftest framework SKIP code is 4 and the framework prints appropriate
messages to indicate that the test is skipped.

Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>

show more ...

selftests: memory-hotplug: delete RUN_TESTS and EMIT_TESTS overrides

Delete RUN_TESTS and EMIT_TESTS overrides and use common defines in
lib.mk. Common defines work after making the chan

selftests: memory-hotplug: delete RUN_TESTS and EMIT_TESTS overrides

Delete RUN_TESTS and EMIT_TESTS overrides and use common defines in
lib.mk. Common defines work after making the change the test to run
with ratio=2 as the default mode to be able to invoke the test without
the "-r 2" argument from the common RUN_TESTS and EMIT_TESTS.

The run_full_tests target now calls the test with "-r 10".

Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Reviewed-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Lei.Yang@windriver.com
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>

show more ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

selftests: fix memory-hotplug test

In the memory offline test, the $ration was used with RANDOM as the
possibility to get it offlined, correct it to become the portion of
available r

selftests: fix memory-hotplug test

In the memory offline test, the $ration was used with RANDOM as the
possibility to get it offlined, correct it to become the portion of
available removable memory blocks.

Also ask the tool to try to offline the next available memory block
if the attempt is unsuccessful. It will only fail if all removable
memory blocks are busy.

A nice example:
$ sudo ./test.sh
Test scope: 10% hotplug memory
online all hot-pluggable memory in offline state:
SKIPPED - no hot-pluggable memory in offline state
offline 10% hot-pluggable memory in online state
trying to offline 3 out of 28 memory block(s):
online->offline memory1
online->offline memory10
./test.sh: line 74: echo: write error: Resource temporarily unavailable
offline_memory_expect_success 10: unexpected fail
online->offline memory100
online->offline memory101
online all hot-pluggable memory in offline state:
offline->online memory1
offline->online memory100
offline->online memory101
skip extra tests: debugfs is not mounted
$ echo $?
0

Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>

show more ...

selftests: add missing test name in memory-hotplug test

There is no prompt for testing memory notifier error injection,
added with the same echo format of other tests above.

Sig

selftests: add missing test name in memory-hotplug test

There is no prompt for testing memory notifier error injection,
added with the same echo format of other tests above.

Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>

show more ...

selftests: check percentage range for memory-hotplug test

Check the precentage range for -r flag in memory-hotplug test.

Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Sig

selftests: check percentage range for memory-hotplug test

Check the precentage range for -r flag in memory-hotplug test.

Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>

show more ...

selftests: check hot-pluggagble memory for memory-hotplug test

Check for hot-pluggable memory availability in prerequisite() of the
memory-hotplug test.

Signed-off-by: Po-Hsu Li

selftests: check hot-pluggagble memory for memory-hotplug test

Check for hot-pluggable memory availability in prerequisite() of the
memory-hotplug test.

Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>

show more ...

selftests: typo correction for memory-hotplug test

Typo fixed for hotpluggable_offline_memory() in memory-hotplug test.

Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Sign

selftests: typo correction for memory-hotplug test

Typo fixed for hotpluggable_offline_memory() in memory-hotplug test.

Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>

show more ...

selftests: Change memory on-off-test.sh name to be unique

cpu and memory hotplug scripts use the same name. Change
memory on-off-test.sh to mem-on-off-test.sh.

Signed-off-by: Sh

selftests: Change memory on-off-test.sh name to be unique

cpu and memory hotplug scripts use the same name. Change
memory on-off-test.sh to mem-on-off-test.sh.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...