selftests/bpf: add uprobe_multi test binary to .gitignore

It seems like it was forgotten to add uprobe_multi binary to .gitignore.
Fix this trivial omission.

Signed-off-by: Andrii Nakryiko <andrii@

selftests/bpf: add uprobe_multi test binary to .gitignore

It seems like it was forgotten to add uprobe_multi binary to .gitignore.
Fix this trivial omission.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230824000016.2658017-1-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>

show more ...

selftests/bpf: Add a cpuv4 test runner for cpu=v4 testing

Similar to no-alu32 runner, if clang compiler supports -mcpu=v4,
a cpuv4 runner is created to test bpf programs compiled with
-mcpu=v4.

The

selftests/bpf: Add a cpuv4 test runner for cpu=v4 testing

Similar to no-alu32 runner, if clang compiler supports -mcpu=v4,
a cpuv4 runner is created to test bpf programs compiled with
-mcpu=v4.

The following are some num-of-insn statistics for each newer
instructions based on existing selftests, excluding subsequent
cpuv4 insn specific tests.

insn pattern # of instructions
reg = (s8)reg 4
reg = (s16)reg 4
reg = (s32)reg 144
reg = *(s8 *)(reg + off) 13
reg = *(s16 *)(reg + off) 14
reg = *(s32 *)(reg + off) 15215
reg = bswap16 reg 142
reg = bswap32 reg 38
reg = bswap64 reg 14
reg s/= reg 0
reg s%= reg 0
gotol <offset> 58

Note that in llvm -mcpu=v4 implementation, the compiler is a little
bit conservative about generating 'gotol' insn (32-bit branch offset)
as it didn't precise count the number of insns (e.g., some insns are
debug insns, etc.). Compared to old 'goto' insn, newer 'gotol' insn
should have comparable verification states to 'goto' insn.

With current patch set, all selftests passed with -mcpu=v4
when running test_progs-cpuv4 binary. The -mcpu=v3 and -mcpu=v2 run
are also successful.

Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230728011250.3718252-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...

selftests/bpf: introduce XDP compliance test tool

Introduce xdp_features tool in order to test XDP features supported by
the NIC and match them against advertised ones.
In order to test supported/ad

selftests/bpf: introduce XDP compliance test tool

Introduce xdp_features tool in order to test XDP features supported by
the NIC and match them against advertised ones.
In order to test supported/advertised XDP features, xdp_features must
run on the Device Under Test (DUT) and on a Tester device.
xdp_features opens a control TCP channel between DUT and Tester devices
to send control commands from Tester to the DUT and a UDP data channel
where the Tester sends UDP 'echo' packets and the DUT is expected to
reply back with the same packet. DUT installs multiple XDP programs on the
NIC to test XDP capabilities and reports back to the Tester some XDP stats.
Currently xdp_features supports the following XDP features:
- XDP_DROP
- XDP_ABORTED
- XDP_PASS
- XDP_TX
- XDP_REDIRECT
- XDP_NDO_XMIT

Co-developed-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/7c1af8e7e6ef0614cf32fa9e6bdaa2d8d605f859.1675245258.git.lorenzo@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...

selftests/bpf: Simple program to dump XDP RX metadata

To be used for verification of driver implementations. Note that
the skb path is gone from the series, but I'm still keeping the
implementation

selftests/bpf: Simple program to dump XDP RX metadata

To be used for verification of driver implementations. Note that
the skb path is gone from the series, but I'm still keeping the
implementation for any possible future work.

$ xdp_hw_metadata <ifname>

On the other machine:

$ echo -n xdp | nc -u -q1 <target> 9091 # for AF_XDP
$ echo -n skb | nc -u -q1 <target> 9092 # for skb

Sample output:

# xdp
xsk_ring_cons__peek: 1
0x19f9090: rx_desc[0]->addr=100000000008000 addr=8100 comp_addr=8000
rx_timestamp_supported: 1
rx_timestamp: 1667850075063948829
0x19f9090: complete idx=8 addr=8000

# skb
found skb hwtstamp = 1668314052.854274681

Decoding:
# xdp
rx_timestamp=1667850075.063948829

$ date -d @1667850075
Mon Nov 7 11:41:15 AM PST 2022
$ date
Mon Nov 7 11:42:05 AM PST 2022

# skb
$ date -d @1668314052
Sat Nov 12 08:34:12 PM PST 2022
$ date
Sat Nov 12 08:37:06 PM PST 2022

Cc: John Fastabend <john.fastabend@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Anatoly Burakov <anatoly.burakov@intel.com>
Cc: Alexander Lobakin <alexandr.lobakin@intel.com>
Cc: Magnus Karlsson <magnus.karlsson@gmail.com>
Cc: Maryam Tahhan <mtahhan@redhat.com>
Cc: xdp-hints@xdp-project.net
Cc: netdev@vger.kernel.org
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230119221536.3349901-18-sdf@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>

show more ...

selftests/bpf: Add host-tools to gitignore

Shows up when cross-compiling:

HOST_SCRATCH_DIR := $(OUTPUT)/host-tools

vs

SCRATCH_DIR := $(OUTPUT)/tools
HOST_SCRATCH_DIR := $(SCRATCH_DI

selftests/bpf: Add host-tools to gitignore

Shows up when cross-compiling:

HOST_SCRATCH_DIR := $(OUTPUT)/host-tools

vs

SCRATCH_DIR := $(OUTPUT)/tools
HOST_SCRATCH_DIR := $(SCRATCH_DIR)

Reported-by: John Sperbeck <jsperbeck@google.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221222213958.2302320-1-sdf@google.com

show more ...

selftests/bpf: add sign-file to .gitignore

Add sign-file to .gitignore to avoid accidentally checking it in.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220

selftests/bpf: add sign-file to .gitignore

Add sign-file to .gitignore to avoid accidentally checking it in.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220923175913.3272430-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...

selftests/bpf: Add veristat tool for mass-verifying BPF object files

Add a small tool, veristat, that allows mass-verification of
a set of *libbpf-compatible* BPF ELF object files. For each such obj

selftests/bpf: Add veristat tool for mass-verifying BPF object files

Add a small tool, veristat, that allows mass-verification of
a set of *libbpf-compatible* BPF ELF object files. For each such object
file, veristat will attempt to verify each BPF program *individually*.
Regardless of success or failure, it parses BPF verifier stats and
outputs them in human-readable table format. In the future we can also
add CSV and JSON output for more scriptable post-processing, if necessary.

veristat allows to specify a set of stats that should be output and
ordering between multiple objects and files (e.g., so that one can
easily order by total instructions processed, instead of default file
name, prog name, verdict, total instructions order).

This tool should be useful for validating various BPF verifier changes
or even validating different kernel versions for regressions.

Here's an example for some of the heaviest selftests/bpf BPF object
files:

$ sudo ./veristat -s insns,file,prog {pyperf,loop,test_verif_scale,strobemeta,test_cls_redirect,profiler}*.linked3.o
File Program Verdict Duration, us Total insns Total states Peak states
------------------------------------ ------------------------------------ ------- ------------ ----------- ------------ -----------
loop3.linked3.o while_true failure 350990 1000001 9663 9663
test_verif_scale3.linked3.o balancer_ingress success 115244 845499 8636 2141
test_verif_scale2.linked3.o balancer_ingress success 77688 773445 3048 788
pyperf600.linked3.o on_event success 2079872 624585 30335 30241
pyperf600_nounroll.linked3.o on_event success 353972 568128 37101 2115
strobemeta.linked3.o on_event success 455230 557149 15915 13537
test_verif_scale1.linked3.o balancer_ingress success 89880 554754 8636 2141
strobemeta_nounroll2.linked3.o on_event success 433906 501725 17087 1912
loop6.linked3.o trace_virtqueue_add_sgs success 282205 398057 8717 919
loop1.linked3.o nested_loops success 125630 361349 5504 5504
pyperf180.linked3.o on_event success 2511740 160398 11470 11446
pyperf100.linked3.o on_event success 744329 87681 6213 6191
test_cls_redirect.linked3.o cls_redirect success 54087 78925 4782 903
strobemeta_subprogs.linked3.o on_event success 57898 65420 1954 403
test_cls_redirect_subprogs.linked3.o cls_redirect success 54522 64965 4619 958
strobemeta_nounroll1.linked3.o on_event success 43313 57240 1757 382
pyperf50.linked3.o on_event success 194355 46378 3263 3241
profiler2.linked3.o tracepoint__syscalls__sys_enter_kill success 23869 43372 1423 542
pyperf_subprogs.linked3.o on_event success 29179 36358 2499 2499
profiler1.linked3.o tracepoint__syscalls__sys_enter_kill success 13052 27036 1946 936
profiler3.linked3.o tracepoint__syscalls__sys_enter_kill success 21023 26016 2186 915
profiler2.linked3.o kprobe__vfs_link success 5255 13896 303 271
profiler1.linked3.o kprobe__vfs_link success 7792 12687 1042 1041
profiler3.linked3.o kprobe__vfs_link success 7332 10601 865 865
profiler2.linked3.o kprobe_ret__do_filp_open success 3417 8900 216 199
profiler2.linked3.o kprobe__vfs_symlink success 3548 8775 203 186
pyperf_global.linked3.o on_event success 10007 7563 520 520
profiler3.linked3.o kprobe_ret__do_filp_open success 4708 6464 532 532
profiler1.linked3.o kprobe_ret__do_filp_open success 3090 6445 508 508
profiler3.linked3.o kprobe__vfs_symlink success 4477 6358 521 521
profiler1.linked3.o kprobe__vfs_symlink success 3381 6347 507 507
profiler2.linked3.o raw_tracepoint__sched_process_exec success 2464 5874 292 189
profiler3.linked3.o raw_tracepoint__sched_process_exec success 2677 4363 397 283
profiler2.linked3.o kprobe__proc_sys_write success 1800 4355 143 138
profiler1.linked3.o raw_tracepoint__sched_process_exec success 1649 4019 333 240
pyperf600_bpf_loop.linked3.o on_event success 2711 3966 306 306
profiler2.linked3.o raw_tracepoint__sched_process_exit success 1234 3138 83 66
profiler3.linked3.o kprobe__proc_sys_write success 1755 2623 223 223
profiler1.linked3.o kprobe__proc_sys_write success 1222 2456 193 193
loop2.linked3.o while_true success 608 1783 57 30
profiler3.linked3.o raw_tracepoint__sched_process_exit success 789 1680 146 146
profiler1.linked3.o raw_tracepoint__sched_process_exit success 592 1526 133 133
strobemeta_bpf_loop.linked3.o on_event success 1015 1512 106 106
loop4.linked3.o combinations success 165 524 18 17
profiler3.linked3.o raw_tracepoint__sched_process_fork success 196 299 25 25
profiler1.linked3.o raw_tracepoint__sched_process_fork success 109 265 19 19
profiler2.linked3.o raw_tracepoint__sched_process_fork success 111 265 19 19
loop5.linked3.o while_true success 47 84 9 9
------------------------------------ ------------------------------------ ------- ------------ ----------- ------------ -----------

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220909193053.577111-4-andrii@kernel.org

show more ...

selftests, xsk: Rename AF_XDP testing app

Recently, xsk part of libbpf was moved to selftests/bpf directory and
lives on its own because there is an AF_XDP testing application that
needs it called x

selftests, xsk: Rename AF_XDP testing app

Recently, xsk part of libbpf was moved to selftests/bpf directory and
lives on its own because there is an AF_XDP testing application that
needs it called xdpxceiver. That name makes it a bit hard to indicate
who maintains it as there are other XDP samples in there, whereas this
one is strictly about AF_XDP.

Do s/xdpxceiver/xskxceiver so that it will be easier to figure out who
maintains it. A follow-up patch will correct MAINTAINERS file.

Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220707111613.49031-2-maciej.fijalkowski@intel.com

show more ...

selftests/bpf: Add selftests for raw syncookie helpers

This commit adds selftests for the new BPF helpers:
bpf_tcp_raw_{gen,check}_syncookie_ipv{4,6}.

xdp_synproxy_kern.c is a BPF program that gene

selftests/bpf: Add selftests for raw syncookie helpers

This commit adds selftests for the new BPF helpers:
bpf_tcp_raw_{gen,check}_syncookie_ipv{4,6}.

xdp_synproxy_kern.c is a BPF program that generates SYN cookies on
allowed TCP ports and sends SYNACKs to clients, accelerating synproxy
iptables module.

xdp_synproxy.c is a userspace control application that allows to
configure the following options in runtime: list of allowed ports, MSS,
window scale, TTL.

A selftest is added to prog_tests that leverages the above programs to
test the functionality of the new helpers.

Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20220615134847.3753567-5-maximmi@nvidia.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...

selftests/bpf: Test subskeleton functionality

This patch changes the selftests/bpf Makefile to also generate
a subskel.h for every skel.h it would have normally generated.

Separately, it also intro

selftests/bpf: Test subskeleton functionality

This patch changes the selftests/bpf Makefile to also generate
a subskel.h for every skel.h it would have normally generated.

Separately, it also introduces a new subskeleton test which tests
library objects, externs, weak symbols, kconfigs, and user maps.

Signed-off-by: Delyan Kratunov <delyank@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1bd24956940bbbfe169bb34f7f87b11df52ef011.1647473511.git.delyank@fb.com

show more ...

selftests/bpf: Fix btfgen tests

There turned out to be a few problems with btfgen selftests.

First, core_btfgen tests are failing in BPF CI due to the use of
full-featured bpftool, which has extra

selftests/bpf: Fix btfgen tests

There turned out to be a few problems with btfgen selftests.

First, core_btfgen tests are failing in BPF CI due to the use of
full-featured bpftool, which has extra dependencies on libbfd, libcap,
etc, which are present in BPF CI's build environment, but those shared
libraries are missing in QEMU image in which test_progs is running.

To fix this problem, use minimal bootstrap version of bpftool instead.
It only depend on libelf and libz, same as libbpf, so doesn't add any
new requirements (and bootstrap bpftool still implementes entire
`bpftool gen` functionality, which is quite convenient).

Second problem is even more interesting. Both core_btfgen and core_reloc
reuse the same set of struct core_reloc_test_case array of test case
definitions. That in itself is not a problem, but btfgen test replaces
test_case->btf_src_file property with the path to temporary file into
which minimized BTF is output by bpftool. This interferes with original
core_reloc tests, depending on order of tests execution (core_btfgen is
run first in sequential mode and skrews up subsequent core_reloc run by
pointing to already deleted temporary file, instead of the original BTF
files) and whether those two runs share the same process (in parallel
mode the chances are high for them to run in two separate processes and
so not interfere with each other).

To prevent this interference, create and use local copy of a test
definition. Mark original array as constant to catch accidental
modifcations. Note that setup_type_id_case_success() and
setup_type_id_case_success() still modify common test_case->output
memory area, but it is ok as each setup function has to re-initialize it
completely anyways. In sequential mode it leads to deterministic and
correct initialization. In parallel mode they will either each have
their own process, or if core_reloc and core_btfgen happen to be run by
the same worker process, they will still do that sequentially within the
worker process. If they are sharded across multiple processes, they
don't really share anything anyways.

Also, rename core_btfgen into core_reloc_btfgen, as it is indeed just
a "flavor" of core_reloc test, not an independent set of tests. So make
it more obvious.

Last problem that needed solving was that location of bpftool differs
between test_progs and test_progs' flavors (e.g., test_progs-no_alu32).
To keep it simple, create a symlink to bpftool both inside
selftests/bpf/ directory and selftests/bpf/<flavor> subdirectory. That
way, from inside core_reloc test, location to bpftool is just "./bpftool".

v2->v3:
- fix bpftool location relative the test_progs-no_alu32;
v1->v2:
- fix corruption of core_reloc_test_case.

Fixes: 704c91e59fe0 ("selftests/bpf: Test "bpftool gen min_core_btf")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yucong Sun <sunyucong@gmail.com>
Link: https://lore.kernel.org/bpf/20220220042720.3336684-1-andrii@kernel.org

show more ...

selftests/bpf: Fix .gitignore to not ignore test_progs.c

List all possible test_progs flavors explicitly to avoid accidentally
ignoring valid source code files. In this case, test_progs.c was still

selftests/bpf: Fix .gitignore to not ignore test_progs.c

List all possible test_progs flavors explicitly to avoid accidentally
ignoring valid source code files. In this case, test_progs.c was still
ignored after recent 809ed84de8b3 ("selftests/bpf: Whitelist test_progs.h
from .gitignore") fix that added exception only for test_progs.h.

Fixes: 74b5a5968fe8 ("selftests/bpf: Replace test_progs and test_maps w/ general rule")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210914162228.3995740-1-andrii@kernel.org

show more ...

selftests/bpf: Move netcnt test under test_progs

Rewrite to skel and ASSERT macros as well while we are at it.

v3:
- replace -f with -A to make it work with busybox ping.
-A is available on both

selftests/bpf: Move netcnt test under test_progs

Rewrite to skel and ASSERT macros as well while we are at it.

v3:
- replace -f with -A to make it work with busybox ping.
-A is available on both busybox and iputils, from the man page:
On networks with low RTT this mode is essentially equivalent to
flood mode.

v2:
- don't check result of bpf_map__fd (Yonghong Song)
- remove from .gitignore (Andrii Nakryiko)
- move ping_command into network_helpers (Andrii Nakryiko)
- remove assert() (Andrii Nakryiko)

Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210804205524.3748709-1-sdf@google.com

show more ...

selftests/bpf: Whitelist test_progs.h from .gitignore

Somehow test_progs.h was being included by the existing rule:

/test_progs*

This is bad because:

1) test_progs.h is a checked in file

selftests/bpf: Whitelist test_progs.h from .gitignore

Somehow test_progs.h was being included by the existing rule:

/test_progs*

This is bad because:

1) test_progs.h is a checked in file
2) grep-like tools like ripgrep[0] respect gitignore and
test_progs.h was being hidden from searches

[0]: https://github.com/BurntSushi/ripgrep

Fixes: 74b5a5968fe8 ("selftests/bpf: Replace test_progs and test_maps w/ general rule")
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/a46f64944bf678bc652410ca6028d3450f4f7f4b.1623880296.git.dxu@dxuuu.xyz

show more ...

selftests, bpf: Make docs tests fail more reliably

Previously, if rst2man caught errors, then these would be ignored and
the output file would be written anyway. This would allow developers to
intro

selftests, bpf: Make docs tests fail more reliably

Previously, if rst2man caught errors, then these would be ignored and
the output file would be written anyway. This would allow developers to
introduce regressions in the docs comments in the BPF headers.

Additionally, even if you instruct rst2man to fail out, it will still
write out to the destination target file, so if you ran the tests twice
in a row it would always pass. Use a temporary file for the initial run
to ensure that if rst2man fails out under "--strict" mode, subsequent
runs will not automatically pass.

Tested via ./tools/testing/selftests/bpf/test_doc_build.sh

Signed-off-by: Joe Stringer <joe@cilium.io>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20210608015756.340385-1-joe@cilium.io

show more ...

selftests/bpf: Add xdp_redirect_multi into .gitignore

When xdp_redirect_multi test binary was added recently, it wasn't added to
.gitignore. Fix that.

Fixes: d23292476297 ("selftests/bpf: Add xdp_r

selftests/bpf: Add xdp_redirect_multi into .gitignore

When xdp_redirect_multi test binary was added recently, it wasn't added to
.gitignore. Fix that.

Fixes: d23292476297 ("selftests/bpf: Add xdp_redirect_multi test")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210603004026.2698513-5-andrii@kernel.org

show more ...

selftests/bpf: Convert few tests to light skeleton.

Convert few tests that don't use CO-RE to light skeleton.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <dani

selftests/bpf: Convert few tests to light skeleton.

Convert few tests that don't use CO-RE to light skeleton.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-19-alexei.starovoitov@gmail.com

show more ...

selftests/bpf: Test syscall command parsing

Add building of the bpf(2) syscall commands documentation as part of the
docs building step in the build. This allows us to pick up on potential
parse err

selftests/bpf: Test syscall command parsing

Add building of the bpf(2) syscall commands documentation as part of the
docs building step in the build. This allows us to pick up on potential
parse errors from the docs generator script as part of selftests.

The generated manual pages here are not intended for distribution, they
are just a fragment that can be integrated into the other static text of
bpf(2) to form the full manual page.

Signed-off-by: Joe Stringer <joe@cilium.io>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210302171947.2268128-14-joe@cilium.io

show more ...

tools/bpf: Remove bpf-helpers from bpftool docs

This logic is used for validating the manual pages from selftests, so
move the infra under tools/testing/selftests/bpf/ and rely on selftests
for vali

tools/bpf: Remove bpf-helpers from bpftool docs

This logic is used for validating the manual pages from selftests, so
move the infra under tools/testing/selftests/bpf/ and rely on selftests
for validation rather than tying it into the bpftool build.

Signed-off-by: Joe Stringer <joe@cilium.io>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210302171947.2268128-12-joe@cilium.io

show more ...

selftests/bpf: Integrate the socket_cookie test to test_progs

Currently, the selftest for the BPF socket_cookie helpers is built and
run independently from test_progs. It's easy to forget and hard t

selftests/bpf: Integrate the socket_cookie test to test_progs

Currently, the selftest for the BPF socket_cookie helpers is built and
run independently from test_progs. It's easy to forget and hard to
maintain.

This patch moves the socket cookies test into prog_tests/ and vastly
simplifies its logic by:
- rewriting the loading code with BPF skeletons
- rewriting the server/client code with network helpers
- rewriting the cgroup code with test__join_cgroup
- rewriting the error handling code with CHECKs

Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: KP Singh <kpsingh@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210210111406.785541-3-revest@chromium.org

show more ...

bpf, selftests: Fold test_current_pid_tgid_new_ns into test_progs.

Currently tests for bpf_get_ns_current_pid_tgid() are outside test_progs.
This change folds test cases into test_progs.

Changes fr

bpf, selftests: Fold test_current_pid_tgid_new_ns into test_progs.

Currently tests for bpf_get_ns_current_pid_tgid() are outside test_progs.
This change folds test cases into test_progs.

Changes from v11:

- Fixed test failure is not detected.
- Removed EXIT(3) call as it will stop test_progs execution.

Signed-off-by: Carlos Neira <cneirabustos@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210114141033.GA17348@localhost
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...

selftests/bpf: Xsk selftests - adding xdpxceiver to .gitignore

This patch adds *xdpxceiver* to selftests/bpf/.gitignore

Reported-by: Yonghong Song <yhs@fb.com>
Suggested-by: Yonghong Song <yhs@fb.c

selftests/bpf: Xsk selftests - adding xdpxceiver to .gitignore

This patch adds *xdpxceiver* to selftests/bpf/.gitignore

Reported-by: Yonghong Song <yhs@fb.com>
Suggested-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Weqaar Janjua <weqaar.a.janjua@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20201210115435.3995-1-weqaar.a.janjua@intel.com

show more ...

selftests/bpf: Add bpf_testmod kernel module for testing

Add bpf_testmod module, which is conceptually out-of-tree module and provides
ways for selftests/bpf to test various kernel module-related fu

selftests/bpf: Add bpf_testmod kernel module for testing

Add bpf_testmod module, which is conceptually out-of-tree module and provides
ways for selftests/bpf to test various kernel module-related functionality:
raw tracepoint, fentry/fexit/fmod_ret, etc. This module will be auto-loaded by
test_progs test runner and expected by some of selftests to be present and
loaded.

Pahole currently isn't able to generate BTF for static functions in kernel
modules, so make sure traced function is global.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-7-andrii@kernel.org

show more ...

selftests/bpf: Move test_tcppbf_user into test_progs

Recently a bug was missed due to the fact that test_tcpbpf_user is not a
part of test_progs. In order to prevent similar issues in the future mov

selftests/bpf: Move test_tcppbf_user into test_progs

Recently a bug was missed due to the fact that test_tcpbpf_user is not a
part of test_progs. In order to prevent similar issues in the future move
the test functionality into test_progs. By doing this we can make certain
that it is a part of standard testing and will not be overlooked.

As a part of moving the functionality into test_progs it is necessary to
integrate with the test_progs framework and to drop any redundant code.
This patch:
1. Cleans up the include headers
2. Dropped a duplicate definition of bpf_find_map
3. Switched over to using test_progs specific cgroup functions
4. Renamed main to test_tcpbpf_user
5. Dropped return value in favor of CHECK_FAIL to check for errors

The general idea is that I wanted to keep the changes as small as possible
while moving the file into the test_progs framework. The follow-on patches
are meant to clean up the remaining issues such as the use of CHECK_FAIL.

Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/160443928881.1086697.17661359319919165370.stgit@localhost.localdomain

show more ...

selftests/bpf: Whitelist test_progs.h from .gitignore

[ Upstream commit 809ed84de8b3f2fd7b1d06efb94bf98fd318a7d7 ]

Somehow test_progs.h was being included by the existing rule:

/test_progs*

T

selftests/bpf: Whitelist test_progs.h from .gitignore

[ Upstream commit 809ed84de8b3f2fd7b1d06efb94bf98fd318a7d7 ]

Somehow test_progs.h was being included by the existing rule:

/test_progs*

This is bad because:

1) test_progs.h is a checked in file
2) grep-like tools like ripgrep[0] respect gitignore and
test_progs.h was being hidden from searches

[0]: https://github.com/BurntSushi/ripgrep

Fixes: 74b5a5968fe8 ("selftests/bpf: Replace test_progs and test_maps w/ general rule")
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/a46f64944bf678bc652410ca6028d3450f4f7f4b.1623880296.git.dxu@dxuuu.xyz
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...