kselftest/arm64: Convert za-fork to use kselftest.h

Now that kselftest.h can be used with nolibc convert the za-fork test to
use it. We do still have to open code ksft_print_msg() but that's not the

kselftest/arm64: Convert za-fork to use kselftest.h

Now that kselftest.h can be used with nolibc convert the za-fork test to
use it. We do still have to open code ksft_print_msg() but that's not the
end of the world. Some of the advantage comes from using printf() which we
could have been using already.

This does change the output when tests are skipped, bringing it in line
with the standard kselftest output by removing the test name - we move
from

ok 0 skipped

to

ok 1 # SKIP fork_test

The old output was not following KTAP format for skips, and the
numbering was not standard or consistent with the reported plan.

Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

show more ...

selftests: arm64: Fix incorrect kernel headers search path

Use $(KHDR_INCLUDES) as lookup path for kernel headers. This prevents
building against kernel headers from the build environment in scenari

selftests: arm64: Fix incorrect kernel headers search path

Use $(KHDR_INCLUDES) as lookup path for kernel headers. This prevents
building against kernel headers from the build environment in scenarios
where kernel headers are installed into a specific output directory
(O=...).

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: <stable@vger.kernel.org> # 5.18+
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

show more ...

kselftest/arm64: Add coverage of the ZT ptrace regset

Add coverage of the ZT ptrace interface.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221208-arm64-sme2-v4-

kselftest/arm64: Add coverage of the ZT ptrace regset

Add coverage of the ZT ptrace interface.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221208-arm64-sme2-v4-20-f2fa0aef982f@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

show more ...

kselftest/arm64: Add a stress test program for ZT0

Following the pattern for the other register sets add a stress test program
for ZT0 which continually loads and verifies patterns in the register i

kselftest/arm64: Add a stress test program for ZT0

Following the pattern for the other register sets add a stress test program
for ZT0 which continually loads and verifies patterns in the register in
an effort to discover context switching problems.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221208-arm64-sme2-v4-14-f2fa0aef982f@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

show more ...

kselftest/arm64: kselftest harness for FP stress tests

Currently the stress test programs for floating point context switching are
run by hand, there are extremely simplistic harnesses which run som

kselftest/arm64: kselftest harness for FP stress tests

Currently the stress test programs for floating point context switching are
run by hand, there are extremely simplistic harnesses which run some copies
of each test individually but they are not integrated into kselftest and
with SVE and SME they only run with whatever vector length the process has
by default. This is hassle when running the tests and means that they're
not being run at all by CI systems picking up kselftest.

In order to improve our coverage and provide a more convenient interface
provide a harness program which starts enough stress test programs up to
cause context switching and runs them for a set period. If only FPSIMD is
available in the system we start two copies of the FPSIMD stress test per
CPU, otherwise we start one copy of the FPSIMD and then start the SVE,
streaming SVE and ZA tests once per CPU for each available VL they have
to run on. We then run for a set period monitoring for any errors
reported by the test programs before cleanly terminating them.

In order to provide additional coverage of signal handling and some extra
noise in the scheduling we send a SIGUSR2 to the stress tests once a
second, the tests will count the number of signals they get.

Since kselftest is generally expected to run quickly we by default only run
for ten seconds. This is enough to show if there is anything cripplingly
wrong but not exactly a thorough soak test, for interactive and more
focused use a command line option -t N is provided which overrides the
length of time to run for (specified in seconds) and if 0 is specified then
there is no timeout and the test must be manually terminated. The timeout
is counted in seconds with no output, this is done to account for the
potentially slow startup time for the test programs on virtual platforms
which tend to struggle during startup as they are both slow and tend to
support a wide range of vector lengths.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220829154452.824870-5-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

show more ...

selftests/arm64: Fix O= builds for the floating point tests

Currently the arm64 floating point tests don't support out of tree builds
due to two quirks of the kselftest build system. One is that whe

selftests/arm64: Fix O= builds for the floating point tests

Currently the arm64 floating point tests don't support out of tree builds
due to two quirks of the kselftest build system. One is that when building
a program from multiple files we shouldn't separately compile the main
program to an object file as that will result in the pattern rule not
matching when adjusted for the output directory. The other is that we also
need to include $(OUTPUT) in the names of the binaries when specifying the
dependencies in order to ensure that they get picked up with O=.

Rewrite the dependencies for the executables to fix these issues. The
kselftest build system will ensure OUTPUT is always defined.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220427181954.357975-5-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

show more ...

selftests/arm64: Clean the fp helper libraries

We provide a couple of object files with helpers linked into several of
the test programs, ensure they are cleaned.

Signed-off-by: Mark Brown <broonie

selftests/arm64: Clean the fp helper libraries

We provide a couple of object files with helpers linked into several of
the test programs, ensure they are cleaned.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220427181954.357975-4-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

show more ...

selftests/arm64: Define top_srcdir for the fp tests

Some of the rules in lib.mk use a top_srcdir variable to figure out where
the top of the kselftest tree is, provide it.

Signed-off-by: Mark Brown

selftests/arm64: Define top_srcdir for the fp tests

Some of the rules in lib.mk use a top_srcdir variable to figure out where
the top of the kselftest tree is, provide it.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220427181954.357975-3-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

show more ...

selftests/arm64: Use TEST_GEN_PROGS_EXTENDED in the FP Makefile

The kselftest lib.mk provides a default all target which builds additional
programs from TEST_GEN_PROGS_EXTENDED, use that rather than

selftests/arm64: Use TEST_GEN_PROGS_EXTENDED in the FP Makefile

The kselftest lib.mk provides a default all target which builds additional
programs from TEST_GEN_PROGS_EXTENDED, use that rather than using
TEST_PROGS_EXTENDED which is for programs that don't need to be built like
shell scripts. Leave fpsimd-stress and sve-stress there since they are
scripts.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220427181954.357975-2-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

show more ...

selftests/arm64: Add a testcase for handling of ZA on clone()

Add a small testcase that attempts to do a clone() with ZA enabled and
verifies that it remains enabled with the same contents. We only

selftests/arm64: Add a testcase for handling of ZA on clone()

Add a small testcase that attempts to do a clone() with ZA enabled and
verifies that it remains enabled with the same contents. We only check
one word in one horizontal vector of ZA since there's already other tests
that check for data corruption more broadly, we're just looking to make
sure that ZA is still enabled and it looks like the data got copied.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220419112247.711548-40-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

show more ...

kselftest/arm64: Add coverage for the ZA ptrace interface

Add some basic coverage for the ZA ptrace interface, including walking
through all the vector lengths supported in the system. Unlike SVE
d

kselftest/arm64: Add coverage for the ZA ptrace interface

Add some basic coverage for the ZA ptrace interface, including walking
through all the vector lengths supported in the system. Unlike SVE
doing syscalls does not discard the ZA state so when we set data in ZA
we run the child process briefly, having it add one to each byte in ZA
in order to validate that both the vector size and data are being read
and written as expected when the process runs.

Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-38-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

show more ...

kselftest/arm64: Add stress test for SME ZA context switching

Add a stress test for context switching of the ZA register state based on
the similar tests Dave Martin wrote for FPSIMD and SVE registe

kselftest/arm64: Add stress test for SME ZA context switching

Add a stress test for context switching of the ZA register state based on
the similar tests Dave Martin wrote for FPSIMD and SVE registers. The test
loops indefinitely writing a data pattern to ZA then reading it back and
verifying that it's what was expected.

Unlike the other tests we manually assemble the SME instructions since at
present no released toolchain has SME support integrated.

Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-35-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

show more ...

kselftest/arm64: sme: Provide streaming mode SVE stress test

One of the features of SME is the addition of streaming mode, in which we
have access to a set of streaming mode SVE registers at the SME

kselftest/arm64: sme: Provide streaming mode SVE stress test

One of the features of SME is the addition of streaming mode, in which we
have access to a set of streaming mode SVE registers at the SME vector
length. Since these are accessed using the SVE instructions let's reuse
the existing SVE stress test for testing with a compile time option for
controlling the few small differences needed:

- Enter streaming mode immediately on starting the program.
- In streaming mode FFR is removed so skip reading and writing FFR.

Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-33-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

show more ...

kselftest/arm64: Extend vector configuration API tests to cover SME

Provide RDVL helpers for SME and extend the main vector configuration tests
to cover SME.

Signed-off-by: Mark Brown <broonie@kern

kselftest/arm64: Extend vector configuration API tests to cover SME

Provide RDVL helpers for SME and extend the main vector configuration tests
to cover SME.

Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-32-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

show more ...

kselftest/arm64: Add pidbench for floating point syscall cases

Since it's likely to be useful for performance work with SVE let's have a
pidbench that gives us some numbers for consideration. In ord

kselftest/arm64: Add pidbench for floating point syscall cases

Since it's likely to be useful for performance work with SVE let's have a
pidbench that gives us some numbers for consideration. In order to ensure
that we test exactly the scenario we want this is written in assembly - if
system libraries use SVE this would stop us exercising the case where the
process has never used SVE.

We exercise three cases:

- Never having used SVE.
- Having used SVE once.
- Using SVE after each syscall.

by spinning running getpid() for a fixed number of iterations with the
time measured using CNTVCT_EL0 reported on the console. This is obviously
a totally unrealistic benchmark which will show the extremes of any
performance variation but equally given the potential gotchas with use of
FP instructions by system libraries it's good to have some concrete code
shared to make it easier to compare notes on results.

Testing over multiple SVE vector lengths will need to be done with vlset
currently, the test could be extended to iterate over all of them if
desired.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211202165107.1075259-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

show more ...

selftests: arm64: Factor out utility functions for assembly FP tests

The various floating point test programs written in assembly have a bunch
of helper functions and macros which are cut'n'pasted b

selftests: arm64: Factor out utility functions for assembly FP tests

The various floating point test programs written in assembly have a bunch
of helper functions and macros which are cut'n'pasted between them. Factor
them out into a separate source file which is linked into all of them.

We don't include memcmp() since it isn't as generic as it should be and
directly branches to report an error in the programs.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211019181851.3341232-1-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>

show more ...

selftests: arm64: Remove extraneous register setting code

For some reason the SVE ptrace test code starts off by setting values in
some of the SVE vector registers in the parent process which it the

selftests: arm64: Remove extraneous register setting code

For some reason the SVE ptrace test code starts off by setting values in
some of the SVE vector registers in the parent process which it then never
interacts with when verifying the ptrace interfaces. This is not especially
relevant to what's being tested and somewhat confusing when reading the
code so let's remove it.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210913125505.52619-4-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>

show more ...

kselftest/arm64: Add tests for SVE vector configuration

We provide interfaces for configuring the SVE vector length seen by
processes using prctl and also via /proc for configuring the default
value

kselftest/arm64: Add tests for SVE vector configuration

We provide interfaces for configuring the SVE vector length seen by
processes using prctl and also via /proc for configuring the default
values. Provide tests that exercise all these interfaces and verify that
they take effect as expected, though at present no test fully enumerates
all the possible vector lengths.

A subset of this is already tested via sve-probe-vls but the /proc
interfaces are not currently covered at all.

In preparation for the forthcoming support for SME, the Scalable Matrix
Extension, which has separately but similarly configured vector lengths
which we expect to offer similar userspace interfaces for, all the actual
files and prctls used are parameterised and we don't validate that the
architectural minimum vector length is the minimum we see.

Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Link: https://lore.kernel.org/r/20210803140450.46624-4-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

show more ...

kselftest/arm64: Validate vector lengths are set in sve-probe-vls

Currently sve-probe-vls does not verify that the vector lengths reported
by the prctl() interface are actually what is reported by t

kselftest/arm64: Validate vector lengths are set in sve-probe-vls

Currently sve-probe-vls does not verify that the vector lengths reported
by the prctl() interface are actually what is reported by the architecture,
use the rdvl_sve() helper to validate this.

Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Link: https://lore.kernel.org/r/20210803140450.46624-3-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

show more ...

kselftest/arm64: Provide a helper binary and "library" for SVE RDVL

SVE provides an instruction RDVL which reports the currently configured
vector length. In order to validate that our vector length

kselftest/arm64: Provide a helper binary and "library" for SVE RDVL

SVE provides an instruction RDVL which reports the currently configured
vector length. In order to validate that our vector length configuration
interfaces are working correctly without having to build the C code for
our test programs with SVE enabled provide a trivial assembly library
with a C callable function that executes RDVL. Since these interfaces
also control behaviour on exec*() provide a trivial wrapper program which
reports the currently configured vector length on stdout, tests can use
this to verify that behaviour on exec*() is as expected.

In preparation for providing similar helper functionality for SME, the
Scalable Matrix Extension, which allows separately configured vector
lengths to be read back both the assembler function and wrapper binary
have SVE included in their name.

Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Link: https://lore.kernel.org/r/20210803140450.46624-2-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

show more ...

selftests: arm64: Add build and documentation for FP tests

Integrate the FP tests with the build system and add some documentation
for the ones run outside the kselftest infrastructure. The content

selftests: arm64: Add build and documentation for FP tests

Integrate the FP tests with the build system and add some documentation
for the ones run outside the kselftest infrastructure. The content in
the README was largely written by Dave Martin with edits by me.

Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200819114837.51466-7-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>

show more ...

selftests: arm64: Add build and documentation for FP tests

Integrate the FP tests with the build system and add some documentation
for the ones run outside the kselftest infrastructure.

selftests: arm64: Add build and documentation for FP tests

Integrate the FP tests with the build system and add some documentation
for the ones run outside the kselftest infrastructure. The content in
the README was largely written by Dave Martin with edits by me.

Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200819114837.51466-7-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>

show more ...