libnvdimm: Introduce CONFIG_NVDIMM_SECURITY_TEST flag

nfit_test overrode the security_show() sysfs attribute function in nvdimm
dimm_devs in order to allow testing of security unlock. With the
intro

libnvdimm: Introduce CONFIG_NVDIMM_SECURITY_TEST flag

nfit_test overrode the security_show() sysfs attribute function in nvdimm
dimm_devs in order to allow testing of security unlock. With the
introduction of CXL security commands, the trick to override
security_show() becomes significantly more complicated. By introdcing a
security flag CONFIG_NVDIMM_SECURITY_TEST, libnvdimm can just toggle the
check via a compile option. In addition the original override can can be
removed from tools/testing/nvdimm/.

The flag will also be used to bypass cpu_cache_invalidate_memregion() when
set in a different commit. This allows testing on QEMU with nfit_test or
cxl_test since cpu_cache_has_invalidate_memregion() checks whether
X86_FEATURE_HYPERVISOR cpu feature flag is set on x86.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983618758.2734609.18031639517065867138.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

show more ...

nvdimm/blk: Delete the block-aperture window driver

Block Aperture Window support was an attempt to layer an error model
over PMEM for platforms that did not support machine-check-recovery.
However,

nvdimm/blk: Delete the block-aperture window driver

Block Aperture Window support was an attempt to layer an error model
over PMEM for platforms that did not support machine-check-recovery.
However, it was abandoned before it ever shipped, and only ever existed
in the ACPI specification. Meanwhile Linux has carried a large pile of
dead code for non-shipping infrastructure. For years it has been off to
the side out of the way, but now CXL and recent directions with DAX
support have the potential to collide with this code.

In preparation for adding discontiguous namespace support, a
pre-requisite for the nvdimm subsystem to replace device-mapper for
striping + concatenation use cases, delete BLK aperture support.

On the obscure chance that some hardware vendor shipped support for this
mode, note that the driver will still keep BLK space reserved in the
label area. So an end user in this case would still have the opportunity
to report the regression to get BLK-mode support restored without
risking the data they have on that device.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/164688416668.2879318.16903178375774275120.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

show more ...

dax: Kill DEV_DAX_PMEM_COMPAT

The /sys/class/dax compatibility option has shipped in the kernel for 4
years now which should be sufficient time for tools to abandon the old
ABI in favor of the /sys/

dax: Kill DEV_DAX_PMEM_COMPAT

The /sys/class/dax compatibility option has shipped in the kernel for 4
years now which should be sufficient time for tools to abandon the old
ABI in favor of the /sys/bus/dax device-model. Delete it now and see if
anyone screams.

Since this compatibility option shipped there has been more reports of
users being surprised by the compat ABI than surprised by the "new", so
the compat infrastructure has outlived its usefulness. Recall that
/sys/bus/dax device-model is required for the dax kmem driver which
allows PMEM to be used as "System RAM".

The following projects were known to have a dependency on /sys/class/dax
and have dropped their dependency as of the listed version:

- ndctl (including libndctl, daxctl, and libdaxctl): v64+
- fio: v3.13+
- pmdk: v1.5.2+

As further evidence this option is no longer needed some distributions
have already stopped enabling CONFIG_DEV_DAX_PMEM_COMPAT.

Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Reported-by: Vishal Verma <vishal.l.verma@intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jane Chu <jane.chu@oracle.com>
Link: https://lore.kernel.org/r/163701116195.3784476.726128179293466337.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

show more ...

tools/test/nvdimm: Fix out of tree build

Out of tree build using

make M=tools/test/nvdimm O=/tmp/build -C /tmp/build

fails with the following error

make: Entering directory '/tmp/build'
CC [

tools/test/nvdimm: Fix out of tree build

Out of tree build using

make M=tools/test/nvdimm O=/tmp/build -C /tmp/build

fails with the following error

make: Entering directory '/tmp/build'
CC [M] tools/testing/nvdimm/test/nfit.o
linux/tools/testing/nvdimm/test/nfit.c:19:10: fatal error: nd-core.h: No such file or directory
19 | #include <nd-core.h>
| ^~~~~~~~~~~
compilation terminated.

That is because the kbuild file uses $(src) which points to
tools/testing/nvdimm, $(srctree) correctly points to root of the linux
source tree.

Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Santosh Sivaraj <santosh@fossix.org>
Link: https://lore.kernel.org/r/20200114054051.4115790-1-santosh@fossix.org
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

show more ...

remove ioremap_nocache and devm_ioremap_nocache

ioremap has provided non-cached semantics by default since the Linux 2.6
days, so remove the additional ioremap_nocache interface.

Signed-off-by: Chr

remove ioremap_nocache and devm_ioremap_nocache

ioremap has provided non-cached semantics by default since the Linux 2.6
days, so remove the additional ioremap_nocache interface.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>

show more ...

tools/testing/nvdimm: Fix mock support for ioremap

After commit d092a8707326 "arch: rely on asm-generic/io.h for default
ioremap_* definitions" the ioremap_nocache() symbol has been replaced
with io

tools/testing/nvdimm: Fix mock support for ioremap

After commit d092a8707326 "arch: rely on asm-generic/io.h for default
ioremap_* definitions" the ioremap_nocache() symbol has been replaced
with ioremap(). Update the mocked symbol list for nvdimm testing.

Link: https://lore.kernel.org/r/157369090817.2974548.10148423996292973088.stgit@dwillia2-desk3.amr.corp.intel.com
Fixes: d092a8707326 ("arch: rely on asm-generic/io.h for default ioremap_* definitions")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

show more ...

tools/testing/nvdimm: add watermarks for dax_pmem* modules

Add nfit_test 'watermarks' for the dax_pmem, dax_pmem_core, and
dax_pmem_compat modules. This causes the nfit_test module to fail
loading i

tools/testing/nvdimm: add watermarks for dax_pmem* modules

Add nfit_test 'watermarks' for the dax_pmem, dax_pmem_core, and
dax_pmem_compat modules. This causes the nfit_test module to fail
loading in case any of these modules are also not overridden with the
ldconfig wrapped modules. Without this, nfit_test would sometimes fail
creation of device-dax namespaces on the nfit_test_bus with an unhelpful
error log such as:

dax_pmem dax5.0: could not reserve metadata
dax_pmem: probe of dax5.0 failed with error -16

Which was caused due to the unwrapped version of
devm_request_mem_region() being called.

Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

show more ...

device-dax: Add /sys/class/dax backwards compatibility

On the expectation that some environments may not upgrade libdaxctl
(userspace component that depends on the /sys/class/dax hierarchy),
provide

device-dax: Add /sys/class/dax backwards compatibility

On the expectation that some environments may not upgrade libdaxctl
(userspace component that depends on the /sys/class/dax hierarchy),
provide a default / legacy dax_pmem_compat driver. The dax_pmem_compat
driver implements the original /sys/class/dax sysfs layout rather than
/sys/bus/dax. When userspace is upgraded it can blacklist this module
and switch to the dax_pmem driver going forward.

CONFIG_DEV_DAX_PMEM_COMPAT and supporting code will be deleted according
to the dax_pmem entry in Documentation/ABI/obsolete/.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>

show more ...

device-dax: Start defining a dax bus model

Towards eliminating the dax_class, move the dax-device-attribute
enabling to a new bus.c file in the core. The amount of code
thrash of sub-sequent patches

device-dax: Start defining a dax bus model

Towards eliminating the dax_class, move the dax-device-attribute
enabling to a new bus.c file in the core. The amount of code
thrash of sub-sequent patches is reduced as no logic changes are made,
just pure code movement.

A temporary export of unregister_dex_dax() and dax_attribute_groups is
needed to preserve compilation, but those symbols become static again in
a follow-on patch.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>

show more ...

tools/testing/nvdimm: Add test support for Intel nvdimm security DSMs

Add nfit_test support for DSM functions "Get Security State",
"Set Passphrase", "Disable Passphrase", "Unlock Unit", "Freeze Loc

tools/testing/nvdimm: Add test support for Intel nvdimm security DSMs

Add nfit_test support for DSM functions "Get Security State",
"Set Passphrase", "Disable Passphrase", "Unlock Unit", "Freeze Lock",
and "Secure Erase" for the fake DIMMs.

Also adding a sysfs knob in order to put the DIMMs in "locked" state. The
order of testing DIMM unlocking would be.
1a. Disable DIMM X.
1b. Set Passphrase to DIMM X.
2. Write to
/sys/devices/platform/nfit_test.0/nfit_test_dimm/test_dimmX/lock_dimm
3. Renable DIMM X
4. Check DIMM X state via sysfs "security" attribute for nmemX.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

show more ...

acpi/nfit, libnvdimm: Add unlock of nvdimm support for Intel DIMMs

Add support to unlock the dimm via the kernel key management APIs. The
passphrase is expected to be pulled from userspace through k

acpi/nfit, libnvdimm: Add unlock of nvdimm support for Intel DIMMs

Add support to unlock the dimm via the kernel key management APIs. The
passphrase is expected to be pulled from userspace through keyutils.
The key management and sysfs attributes are libnvdimm generic.

Encrypted keys are used to protect the nvdimm passphrase at rest. The
master key can be a trusted-key sealed in a TPM, preferred, or an
encrypted-key, more flexible, but more exposure to a potential attacker.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

show more ...

acpi/nfit, libnvdimm: Introduce nvdimm_security_ops

Some NVDIMMs, like the ones defined by the NVDIMM_FAMILY_INTEL command
set, expose a security capability to lock the DIMMs at poweroff and
require

acpi/nfit, libnvdimm: Introduce nvdimm_security_ops

Some NVDIMMs, like the ones defined by the NVDIMM_FAMILY_INTEL command
set, expose a security capability to lock the DIMMs at poweroff and
require a passphrase to unlock them. The security model is derived from
ATA security. In anticipation of other DIMMs implementing a similar
scheme, and to abstract the core security implementation away from the
device-specific details, introduce nvdimm_security_ops.

Initially only a status retrieval operation, ->state(), is defined,
along with the base infrastructure and definitions for future
operations.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

show more ...

tools/testing/nvdimm: Populate dirty shutdown data

Allow the unit tests to verify the retrieval of the dirty shutdown
count via smart commands, and allow the driver-load-time retrieval of
the smart

tools/testing/nvdimm: Populate dirty shutdown data

Allow the unit tests to verify the retrieval of the dirty shutdown
count via smart commands, and allow the driver-load-time retrieval of
the smart health payload to be simulated by nfit_test.

Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

show more ...

tools/testing/nvdimm: force nfit_test to depend on instrumented modules

The libnvdimm unit tests will fail when they are run against the
production / in-tree version of libnvdimm.ko or nfit.ko due t

tools/testing/nvdimm: force nfit_test to depend on instrumented modules

The libnvdimm unit tests will fail when they are run against the
production / in-tree version of libnvdimm.ko or nfit.ko due to
symbols not being mocked per nfit_test's expectation. For example,
nfit_test expects acpi_evaluate_dsm() to be replaced by
__wrap_acpi_evaluate_dsm() to test how acpi_nfit_ctl() responds to
different stimuli.

Create a test-only symbol name that nfit_test links against to cause
module load failures when the wrong module is present.

For example, with this change, attempts to use the wrong module will
report:

nfit_test: Unknown symbol libnvdimm_test (err 0)

Reported-by: Dave Jiang <dave.jiang@intel.com>
Reported-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

show more ...

libnvdimm: move poison list functions to a new 'badrange' file

nfit_test needs to use the poison list manipulation code as well. Make
it more generic and in the process rename poison to badrange, an

libnvdimm: move poison list functions to a new 'badrange' file

nfit_test needs to use the poison list manipulation code as well. Make
it more generic and in the process rename poison to badrange, and move
all the related helpers to a new file.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
[vishal: Add badrange.o to nfit_test's Kbuild]
[vishal: add a missed include in bus.c for the new badrange functions]
[vishal: rename all instances of 'be' to 'bre']
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

show more ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

dax: refactor dax-fs into a generic provider of 'struct dax_device' instances

We want dax capable drivers to be able to publish a set of dax
operations [1]. However, we do not want to further abuse

dax: refactor dax-fs into a generic provider of 'struct dax_device' instances

We want dax capable drivers to be able to publish a set of dax
operations [1]. However, we do not want to further abuse block_devices
to advertise these operations. Instead we will attach these operations
to a dax device and add a lookup mechanism to go from block device path
to a dax device. A dax capable driver like pmem or brd is responsible
for registering a dax device, alongside a block device, and then a dax
capable filesystem is responsible for retrieving the dax device by path
name if it wants to call dax_operations.

For now, we refactor the dax pseudo-fs to be a generic facility, rather
than an implementation detail, of the device-dax use case. Where a "dax
device" is just an inode + dax infrastructure, and "Device DAX" is a
mapping service layered on top of that base 'struct dax_device'.
"Filesystem DAX" is then a mapping service that layers a filesystem on
top of that same base device. Filesystem DAX is associated with a
block_device for now, but perhaps directly to a dax device in the
future, or for new pmem-only filesystems.

[1]: https://lkml.org/lkml/2017/1/19/880

Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

show more ...

device-dax, tools/testing/nvdimm: enable device-dax with mock resources

Provide a replacement pgoff_to_phys() that translates an nfit_test
resource (allocated by vmalloc()) to a pfn.

Signed-off-by:

device-dax, tools/testing/nvdimm: enable device-dax with mock resources

Provide a replacement pgoff_to_phys() that translates an nfit_test
resource (allocated by vmalloc()) to a pfn.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

show more ...

tools/testing/nvdimm: unit test acpi_nfit_ctl()

A recent flurry of bug discoveries in the nfit driver's DSM marshalling
routine has highlighted the fact that we do not have unit test coverage
for th

tools/testing/nvdimm: unit test acpi_nfit_ctl()

A recent flurry of bug discoveries in the nfit driver's DSM marshalling
routine has highlighted the fact that we do not have unit test coverage
for this routine. Add a self-test of acpi_nfit_ctl() routine before
probing the "nfit_test.0" device. This mocks stimulus to acpi_nfit_ctl()
and if any of the tests fail "nfit_test.0" will be unavailable causing
the rest of the tests to not run / fail.

This unit test will also be a place to land reproductions of quirky BIOS
behavior discovered in the field and ensure the kernel does not regress
against implementations it has seen in practice.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>

show more ...

tools/testing/nvdimm: unit test for acpi_nfit_notify()

We have had a couple bugs in this implementation in the past and before
we add another ->notify() implementation for nvdimm devices, lets allow

tools/testing/nvdimm: unit test for acpi_nfit_notify()

We have had a couple bugs in this implementation in the past and before
we add another ->notify() implementation for nvdimm devices, lets allow
this routine to be exercised via nfit_test.

Rewrite acpi_nfit_notify() in terms of a generic struct device and
acpi_handle parameter, and then implement a mock acpi_evaluate_object()
that returns a _FIT payload.

Cc: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

show more ...

nfit: do an ARS scrub on hitting a latent media error

When a latent (unknown to 'badblocks') error is encountered, it will
trigger a machine check exception. On a system with machine check
recovery,

nfit: do an ARS scrub on hitting a latent media error

When a latent (unknown to 'badblocks') error is encountered, it will
trigger a machine check exception. On a system with machine check
recovery, this will only SIGBUS the process(es) which had the bad page
mapped (as opposed to a kernel panic on platforms without machine
check recovery features). In the former case, we want to trigger a full
rescan of that nvdimm bus. This will allow any additional, new errors
to be captured in the block devices' badblocks lists, and offending
operations on them can be trapped early, avoiding machine checks.

This is done by registering a callback function with the
x86_mce_decoder_chain and calling the new ars_rescan functionality with
the address in the mce notificatiion.

Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

show more ...

nfit: move to nfit/ sub-directory

With the arrival of x86-machine-check support the nfit driver will add a
(conditionally-compiled) source file. Prepare for this by moving all
nfit source to driver

nfit: move to nfit/ sub-directory

With the arrival of x86-machine-check support the nfit driver will add a
(conditionally-compiled) source file. Prepare for this by moving all
nfit source to drivers/acpi/nfit/. This is pure code movement, no
functional changes.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>

show more ...

tools/testing/nvdimm: replace CONFIG_DMA_CMA dependency with vmalloc()

DMA_CMA is incompatible with SWIOTLB used in enterprise distro
configurations. Switch to vmalloc() allocations for all resourc

tools/testing/nvdimm: replace CONFIG_DMA_CMA dependency with vmalloc()

DMA_CMA is incompatible with SWIOTLB used in enterprise distro
configurations. Switch to vmalloc() allocations for all resources.

Acked-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

show more ...

libnvdimm, pmem: allow nfit_test to override pmem_direct_access()

Currently phys_to_pfn_t() is an exported symbol to allow nfit_test to
override it and indicate that nfit_test-pmem is not device-map

libnvdimm, pmem: allow nfit_test to override pmem_direct_access()

Currently phys_to_pfn_t() is an exported symbol to allow nfit_test to
override it and indicate that nfit_test-pmem is not device-mapped. Now,
we want to enable nfit_test to operate without DMA_CMA and the pmem it
provides will no longer be physically contiguous, i.e. won't be capable
of supporting direct_access requests larger than a page. Make
pmem_direct_access() a weak symbol so that it can be replaced by the
tools/testing/nvdimm/ version, and move phys_to_pfn_t() to a static
inline now that it no longer needs to be overridden.

Acked-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

show more ...

/dev/dax, pmem: direct access to persistent memory

Device DAX is the device-centric analogue of Filesystem DAX
(CONFIG_FS_DAX). It allows memory ranges to be allocated and mapped
without need of an

/dev/dax, pmem: direct access to persistent memory

Device DAX is the device-centric analogue of Filesystem DAX
(CONFIG_FS_DAX). It allows memory ranges to be allocated and mapped
without need of an intervening file system. Device DAX is strict,
precise and predictable. Specifically this interface:

1/ Guarantees fault granularity with respect to a given page size (pte,
pmd, or pud) set at configuration time.

2/ Enforces deterministic behavior by being strict about what fault
scenarios are supported.

For example, by forcing MADV_DONTFORK semantics and omitting MAP_PRIVATE
support device-dax guarantees that a mapping always behaves/performs the
same once established. It is the "what you see is what you get" access
mechanism to differentiated memory vs filesystem DAX which has
filesystem specific implementation semantics.

Persistent memory is the first target, but the mechanism is also
targeted for exclusive allocations of performance differentiated memory
ranges.

This commit is limited to the base device driver infrastructure to
associate a dax device with pmem range.

Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

show more ...