perf pmu: Count sys and cpuid JSON events separately

[ Upstream commit d9c5f5f94c2d356fdf3503f7fcaf254512bc032d ]

Sys events are eagerly loaded as each event has a compat option that may
mean the e

perf pmu: Count sys and cpuid JSON events separately

[ Upstream commit d9c5f5f94c2d356fdf3503f7fcaf254512bc032d ]

Sys events are eagerly loaded as each event has a compat option that may
mean the event is or isn't associated with the PMU.

These shouldn't be counted as loaded_json_events as that is used for
JSON events matching the CPUID that may or may not have been loaded. The
mismatch causes issues on ARM64 that uses sys events.

Fixes: e6ff1eed3584362d ("perf pmu: Lazily add JSON events")
Closes: https://lore.kernel.org/lkml/20240510024729.1075732-1-justin.he@arm.com/
Reported-by: Jia He <justin.he@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240511003601.2666907-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

perf pmu: Assume sysfs events are always the same case

[ Upstream commit 7b6dd7a923281a7ccb980a0f768d6926721eb3cc ]

Perf event names aren't case sensitive. For sysfs events the entire
directory of

perf pmu: Assume sysfs events are always the same case

[ Upstream commit 7b6dd7a923281a7ccb980a0f768d6926721eb3cc ]

Perf event names aren't case sensitive. For sysfs events the entire
directory of events is read then iterated comparing names in a case
insensitive way, most often to see if an event is present.

Consider:

$ perf stat -e inst_retired.any true

The event inst_retired.any may be present in any PMU, so every PMU's
sysfs events are loaded and then searched with strcasecmp to see if
any match. This event is only present on the cpu PMU as a JSON event
so a lot of events were loaded from sysfs unnecessarily just to prove
an event didn't exist there.

This change avoids loading all the events by assuming sysfs event
names are always either lower or uppercase. It uses file exists and
only loads the events when the desired event is present.

For the example above, the number of openat calls measured by 'perf
trace' on a tigerlake laptop goes from 325 down to 255. The reduction
will be larger for machines with many PMUs, particularly replicated
uncore PMUs.

Ensure pmu_aliases_parse() is called before all uses of the aliases
list, but remove some "pmu->sysfs_aliases_loaded" tests as they are now
part of the function.

Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240502213507.2339733-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: d9c5f5f94c2d ("perf pmu: Count sys and cpuid JSON events separately")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

perf tools: Add/use PMU reverse lookup from config to name

[ Upstream commit 67ee8e71daabb8632931b7559e5c8a4b69a427f8 ]

Add perf_pmu__name_from_config that does a reverse lookup from a
config numbe

perf tools: Add/use PMU reverse lookup from config to name

[ Upstream commit 67ee8e71daabb8632931b7559e5c8a4b69a427f8 ]

Add perf_pmu__name_from_config that does a reverse lookup from a
config number to an alias name. The lookup is expensive as the config
is computed for every alias by filling in a perf_event_attr, but this
is only done when verbose output is enabled. The lookup also only
considers config, and not config1, config2 or config3.

An example of the output:

$ perf stat -vv -e data_read true
...
perf_event_attr:
type 24 (uncore_imc_free_running_0)
size 136
config 0x20ff (data_read)
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
exclude_guest 1
...

Committer notes:

Fix the python binding build by adding dummies for not strictly
needed perf_pmu__name_from_config() and perf_pmus__find_by_type().

Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20240308001915.4060155-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: d9c5f5f94c2d ("perf pmu: Count sys and cpuid JSON events separately")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

perf pmu: "Compat" supports regular expression matching identifiers

[ Upstream commit 2879ff36f5ed80deec5f9d82a7a4107f2347630e ]

The jevent "Compat" is used for uncore PMU alias or metric definitio

perf pmu: "Compat" supports regular expression matching identifiers

[ Upstream commit 2879ff36f5ed80deec5f9d82a7a4107f2347630e ]

The jevent "Compat" is used for uncore PMU alias or metric definitions.

The same PMU driver has different PMU identifiers due to different
hardware versions and types, but they may have some common PMU event.
Since a Compat value can only match one identifier, when adding the
same event alias to PMUs with different identifiers, each identifier
needs to be defined once, which is not streamlined enough.

So let "Compat" support using regular expression to match identifiers
for uncore PMU alias. For example, if the "Compat" value is set to
"43401|43c01", it would be able to match PMU identifiers such as "43401"
or "43c01", which correspond to CMN600_r0p0 or CMN700_r0p0.

Signed-off-by: Jing Zhang <renyu.zj@linux.alibaba.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Shuai Xue <xueshuai@linux.alibaba.com>
Cc: Zhuo Song <zhuo.song@linux.alibaba.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-doc@vger.kernel.org
Link: https://lore.kernel.org/r/1695794391-34817-2-git-send-email-renyu.zj@linux.alibaba.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Stable-dep-of: d9c5f5f94c2d ("perf pmu: Count sys and cpuid JSON events separately")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

perf pmu: Move pmu__find_core_pmu() to pmus.c

[ Upstream commit 3d0f5f456a5786573ba6a3358178c8db580e4b85 ]

pmu__find_core_pmu() more logically belongs in pmus.c because it
iterates over all PMUs, s

perf pmu: Move pmu__find_core_pmu() to pmus.c

[ Upstream commit 3d0f5f456a5786573ba6a3358178c8db580e4b85 ]

pmu__find_core_pmu() more logically belongs in pmus.c because it
iterates over all PMUs, so move it to pmus.c

At the same time rename it to perf_pmus__find_core_pmu() to match the
naming convention in this file.

list_prepare_entry() can't be used in perf_pmus__scan_core() anymore now
that it's called from the same compilation unit. This is with -O2
(specifically -O1 -ftree-vrp -finline-functions
-finline-small-functions) which allow the bounds of the array
access to be determined at compile time. list_prepare_entry() subtracts
the offset of the 'list' member in struct perf_pmu from &core_pmus,
which isn't a struct perf_pmu. The compiler sees that pmu results in
&core_pmus - 8 and refuses to compile. At runtime this works because
list_for_each_entry_continue() always adds the offset back again before
dereferencing ->next, but it's technically undefined behavior. With
-fsanitize=undefined an additional warning is generated.

Using list_first_entry_or_null() to get the first entry here avoids
doing &core_pmus - 8 but has the same result and fixes both the compile
warning and the undefined behavior warning. There are other uses of
list_prepare_entry() in pmus.c, but the compiler doesn't seem to be
able to see that they can also be called with &core_pmus, so I won't
change any at this time.

Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Haixin Yu <yuhaixin.yhx@linux.alibaba.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230913153355.138331-2-james.clark@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Stable-dep-of: d9c5f5f94c2d ("perf pmu: Count sys and cpuid JSON events separately")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

perf pmu: Count sys and cpuid JSON events separately

[ Upstream commit d9c5f5f94c2d356fdf3503f7fcaf254512bc032d ]

Sys events are eagerly loaded as each event has a compat option that may
mean the e

perf pmu: Count sys and cpuid JSON events separately

[ Upstream commit d9c5f5f94c2d356fdf3503f7fcaf254512bc032d ]

Sys events are eagerly loaded as each event has a compat option that may
mean the event is or isn't associated with the PMU.

These shouldn't be counted as loaded_json_events as that is used for
JSON events matching the CPUID that may or may not have been loaded. The
mismatch causes issues on ARM64 that uses sys events.

Fixes: e6ff1eed3584362d ("perf pmu: Lazily add JSON events")
Closes: https://lore.kernel.org/lkml/20240510024729.1075732-1-justin.he@arm.com/
Reported-by: Jia He <justin.he@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240511003601.2666907-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

perf pmu: Assume sysfs events are always the same case

[ Upstream commit 7b6dd7a923281a7ccb980a0f768d6926721eb3cc ]

Perf event names aren't case sensitive. For sysfs events the entire
directory of

perf pmu: Assume sysfs events are always the same case

[ Upstream commit 7b6dd7a923281a7ccb980a0f768d6926721eb3cc ]

Perf event names aren't case sensitive. For sysfs events the entire
directory of events is read then iterated comparing names in a case
insensitive way, most often to see if an event is present.

Consider:

$ perf stat -e inst_retired.any true

The event inst_retired.any may be present in any PMU, so every PMU's
sysfs events are loaded and then searched with strcasecmp to see if
any match. This event is only present on the cpu PMU as a JSON event
so a lot of events were loaded from sysfs unnecessarily just to prove
an event didn't exist there.

This change avoids loading all the events by assuming sysfs event
names are always either lower or uppercase. It uses file exists and
only loads the events when the desired event is present.

For the example above, the number of openat calls measured by 'perf
trace' on a tigerlake laptop goes from 325 down to 255. The reduction
will be larger for machines with many PMUs, particularly replicated
uncore PMUs.

Ensure pmu_aliases_parse() is called before all uses of the aliases
list, but remove some "pmu->sysfs_aliases_loaded" tests as they are now
part of the function.

Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240502213507.2339733-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: d9c5f5f94c2d ("perf pmu: Count sys and cpuid JSON events separately")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

perf tools: Add/use PMU reverse lookup from config to name

[ Upstream commit 67ee8e71daabb8632931b7559e5c8a4b69a427f8 ]

Add perf_pmu__name_from_config that does a reverse lookup from a
config numbe

perf tools: Add/use PMU reverse lookup from config to name

[ Upstream commit 67ee8e71daabb8632931b7559e5c8a4b69a427f8 ]

Add perf_pmu__name_from_config that does a reverse lookup from a
config number to an alias name. The lookup is expensive as the config
is computed for every alias by filling in a perf_event_attr, but this
is only done when verbose output is enabled. The lookup also only
considers config, and not config1, config2 or config3.

An example of the output:

$ perf stat -vv -e data_read true
...
perf_event_attr:
type 24 (uncore_imc_free_running_0)
size 136
config 0x20ff (data_read)
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
exclude_guest 1
...

Committer notes:

Fix the python binding build by adding dummies for not strictly
needed perf_pmu__name_from_config() and perf_pmus__find_by_type().

Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20240308001915.4060155-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: d9c5f5f94c2d ("perf pmu: Count sys and cpuid JSON events separately")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

perf pmu: "Compat" supports regular expression matching identifiers

[ Upstream commit 2879ff36f5ed80deec5f9d82a7a4107f2347630e ]

The jevent "Compat" is used for uncore PMU alias or metric definitio

perf pmu: "Compat" supports regular expression matching identifiers

[ Upstream commit 2879ff36f5ed80deec5f9d82a7a4107f2347630e ]

The jevent "Compat" is used for uncore PMU alias or metric definitions.

The same PMU driver has different PMU identifiers due to different
hardware versions and types, but they may have some common PMU event.
Since a Compat value can only match one identifier, when adding the
same event alias to PMUs with different identifiers, each identifier
needs to be defined once, which is not streamlined enough.

So let "Compat" support using regular expression to match identifiers
for uncore PMU alias. For example, if the "Compat" value is set to
"43401|43c01", it would be able to match PMU identifiers such as "43401"
or "43c01", which correspond to CMN600_r0p0 or CMN700_r0p0.

Signed-off-by: Jing Zhang <renyu.zj@linux.alibaba.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Shuai Xue <xueshuai@linux.alibaba.com>
Cc: Zhuo Song <zhuo.song@linux.alibaba.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-doc@vger.kernel.org
Link: https://lore.kernel.org/r/1695794391-34817-2-git-send-email-renyu.zj@linux.alibaba.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Stable-dep-of: d9c5f5f94c2d ("perf pmu: Count sys and cpuid JSON events separately")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

perf pmu: Move pmu__find_core_pmu() to pmus.c

[ Upstream commit 3d0f5f456a5786573ba6a3358178c8db580e4b85 ]

pmu__find_core_pmu() more logically belongs in pmus.c because it
iterates over all PMUs, s

perf pmu: Move pmu__find_core_pmu() to pmus.c

[ Upstream commit 3d0f5f456a5786573ba6a3358178c8db580e4b85 ]

pmu__find_core_pmu() more logically belongs in pmus.c because it
iterates over all PMUs, so move it to pmus.c

At the same time rename it to perf_pmus__find_core_pmu() to match the
naming convention in this file.

list_prepare_entry() can't be used in perf_pmus__scan_core() anymore now
that it's called from the same compilation unit. This is with -O2
(specifically -O1 -ftree-vrp -finline-functions
-finline-small-functions) which allow the bounds of the array
access to be determined at compile time. list_prepare_entry() subtracts
the offset of the 'list' member in struct perf_pmu from &core_pmus,
which isn't a struct perf_pmu. The compiler sees that pmu results in
&core_pmus - 8 and refuses to compile. At runtime this works because
list_for_each_entry_continue() always adds the offset back again before
dereferencing ->next, but it's technically undefined behavior. With
-fsanitize=undefined an additional warning is generated.

Using list_first_entry_or_null() to get the first entry here avoids
doing &core_pmus - 8 but has the same result and fixes both the compile
warning and the undefined behavior warning. There are other uses of
list_prepare_entry() in pmus.c, but the compiler doesn't seem to be
able to see that they can also be called with &core_pmus, so I won't
change any at this time.

Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Haixin Yu <yuhaixin.yhx@linux.alibaba.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230913153355.138331-2-james.clark@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Stable-dep-of: d9c5f5f94c2d ("perf pmu: Count sys and cpuid JSON events separately")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

perf pmu: Count sys and cpuid JSON events separately

[ Upstream commit d9c5f5f94c2d356fdf3503f7fcaf254512bc032d ]

Sys events are eagerly loaded as each event has a compat option that may
mean the e

perf pmu: Count sys and cpuid JSON events separately

[ Upstream commit d9c5f5f94c2d356fdf3503f7fcaf254512bc032d ]

Sys events are eagerly loaded as each event has a compat option that may
mean the event is or isn't associated with the PMU.

These shouldn't be counted as loaded_json_events as that is used for
JSON events matching the CPUID that may or may not have been loaded. The
mismatch causes issues on ARM64 that uses sys events.

Fixes: e6ff1eed3584362d ("perf pmu: Lazily add JSON events")
Closes: https://lore.kernel.org/lkml/20240510024729.1075732-1-justin.he@arm.com/
Reported-by: Jia He <justin.he@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240511003601.2666907-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

perf pmu: Assume sysfs events are always the same case

[ Upstream commit 7b6dd7a923281a7ccb980a0f768d6926721eb3cc ]

Perf event names aren't case sensitive. For sysfs events the entire
directory of

perf pmu: Assume sysfs events are always the same case

[ Upstream commit 7b6dd7a923281a7ccb980a0f768d6926721eb3cc ]

Perf event names aren't case sensitive. For sysfs events the entire
directory of events is read then iterated comparing names in a case
insensitive way, most often to see if an event is present.

Consider:

$ perf stat -e inst_retired.any true

The event inst_retired.any may be present in any PMU, so every PMU's
sysfs events are loaded and then searched with strcasecmp to see if
any match. This event is only present on the cpu PMU as a JSON event
so a lot of events were loaded from sysfs unnecessarily just to prove
an event didn't exist there.

This change avoids loading all the events by assuming sysfs event
names are always either lower or uppercase. It uses file exists and
only loads the events when the desired event is present.

For the example above, the number of openat calls measured by 'perf
trace' on a tigerlake laptop goes from 325 down to 255. The reduction
will be larger for machines with many PMUs, particularly replicated
uncore PMUs.

Ensure pmu_aliases_parse() is called before all uses of the aliases
list, but remove some "pmu->sysfs_aliases_loaded" tests as they are now
part of the function.

Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240502213507.2339733-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: d9c5f5f94c2d ("perf pmu: Count sys and cpuid JSON events separately")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

perf tools: Add/use PMU reverse lookup from config to name

[ Upstream commit 67ee8e71daabb8632931b7559e5c8a4b69a427f8 ]

Add perf_pmu__name_from_config that does a reverse lookup from a
config numbe

perf tools: Add/use PMU reverse lookup from config to name

[ Upstream commit 67ee8e71daabb8632931b7559e5c8a4b69a427f8 ]

Add perf_pmu__name_from_config that does a reverse lookup from a
config number to an alias name. The lookup is expensive as the config
is computed for every alias by filling in a perf_event_attr, but this
is only done when verbose output is enabled. The lookup also only
considers config, and not config1, config2 or config3.

An example of the output:

$ perf stat -vv -e data_read true
...
perf_event_attr:
type 24 (uncore_imc_free_running_0)
size 136
config 0x20ff (data_read)
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
exclude_guest 1
...

Committer notes:

Fix the python binding build by adding dummies for not strictly
needed perf_pmu__name_from_config() and perf_pmus__find_by_type().

Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20240308001915.4060155-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: d9c5f5f94c2d ("perf pmu: Count sys and cpuid JSON events separately")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

perf pmu: "Compat" supports regular expression matching identifiers

[ Upstream commit 2879ff36f5ed80deec5f9d82a7a4107f2347630e ]

The jevent "Compat" is used for uncore PMU alias or metric definitio

perf pmu: "Compat" supports regular expression matching identifiers

[ Upstream commit 2879ff36f5ed80deec5f9d82a7a4107f2347630e ]

The jevent "Compat" is used for uncore PMU alias or metric definitions.

The same PMU driver has different PMU identifiers due to different
hardware versions and types, but they may have some common PMU event.
Since a Compat value can only match one identifier, when adding the
same event alias to PMUs with different identifiers, each identifier
needs to be defined once, which is not streamlined enough.

So let "Compat" support using regular expression to match identifiers
for uncore PMU alias. For example, if the "Compat" value is set to
"43401|43c01", it would be able to match PMU identifiers such as "43401"
or "43c01", which correspond to CMN600_r0p0 or CMN700_r0p0.

Signed-off-by: Jing Zhang <renyu.zj@linux.alibaba.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Shuai Xue <xueshuai@linux.alibaba.com>
Cc: Zhuo Song <zhuo.song@linux.alibaba.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-doc@vger.kernel.org
Link: https://lore.kernel.org/r/1695794391-34817-2-git-send-email-renyu.zj@linux.alibaba.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Stable-dep-of: d9c5f5f94c2d ("perf pmu: Count sys and cpuid JSON events separately")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

perf pmu: Move pmu__find_core_pmu() to pmus.c

[ Upstream commit 3d0f5f456a5786573ba6a3358178c8db580e4b85 ]

pmu__find_core_pmu() more logically belongs in pmus.c because it
iterates over all PMUs, s

perf pmu: Move pmu__find_core_pmu() to pmus.c

[ Upstream commit 3d0f5f456a5786573ba6a3358178c8db580e4b85 ]

pmu__find_core_pmu() more logically belongs in pmus.c because it
iterates over all PMUs, so move it to pmus.c

At the same time rename it to perf_pmus__find_core_pmu() to match the
naming convention in this file.

list_prepare_entry() can't be used in perf_pmus__scan_core() anymore now
that it's called from the same compilation unit. This is with -O2
(specifically -O1 -ftree-vrp -finline-functions
-finline-small-functions) which allow the bounds of the array
access to be determined at compile time. list_prepare_entry() subtracts
the offset of the 'list' member in struct perf_pmu from &core_pmus,
which isn't a struct perf_pmu. The compiler sees that pmu results in
&core_pmus - 8 and refuses to compile. At runtime this works because
list_for_each_entry_continue() always adds the offset back again before
dereferencing ->next, but it's technically undefined behavior. With
-fsanitize=undefined an additional warning is generated.

Using list_first_entry_or_null() to get the first entry here avoids
doing &core_pmus - 8 but has the same result and fixes both the compile
warning and the undefined behavior warning. There are other uses of
list_prepare_entry() in pmus.c, but the compiler doesn't seem to be
able to see that they can also be called with &core_pmus, so I won't
change any at this time.

Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Haixin Yu <yuhaixin.yhx@linux.alibaba.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230913153355.138331-2-james.clark@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Stable-dep-of: d9c5f5f94c2d ("perf pmu: Count sys and cpuid JSON events separately")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

perf pmu: Count sys and cpuid JSON events separately

[ Upstream commit d9c5f5f94c2d356fdf3503f7fcaf254512bc032d ]

Sys events are eagerly loaded as each event has a compat option that may
mean the e

perf pmu: Count sys and cpuid JSON events separately

[ Upstream commit d9c5f5f94c2d356fdf3503f7fcaf254512bc032d ]

Sys events are eagerly loaded as each event has a compat option that may
mean the event is or isn't associated with the PMU.

These shouldn't be counted as loaded_json_events as that is used for
JSON events matching the CPUID that may or may not have been loaded. The
mismatch causes issues on ARM64 that uses sys events.

Fixes: e6ff1eed3584362d ("perf pmu: Lazily add JSON events")
Closes: https://lore.kernel.org/lkml/20240510024729.1075732-1-justin.he@arm.com/
Reported-by: Jia He <justin.he@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240511003601.2666907-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

perf pmu: Assume sysfs events are always the same case

[ Upstream commit 7b6dd7a923281a7ccb980a0f768d6926721eb3cc ]

Perf event names aren't case sensitive. For sysfs events the entire
directory of

perf pmu: Assume sysfs events are always the same case

[ Upstream commit 7b6dd7a923281a7ccb980a0f768d6926721eb3cc ]

Perf event names aren't case sensitive. For sysfs events the entire
directory of events is read then iterated comparing names in a case
insensitive way, most often to see if an event is present.

Consider:

$ perf stat -e inst_retired.any true

The event inst_retired.any may be present in any PMU, so every PMU's
sysfs events are loaded and then searched with strcasecmp to see if
any match. This event is only present on the cpu PMU as a JSON event
so a lot of events were loaded from sysfs unnecessarily just to prove
an event didn't exist there.

This change avoids loading all the events by assuming sysfs event
names are always either lower or uppercase. It uses file exists and
only loads the events when the desired event is present.

For the example above, the number of openat calls measured by 'perf
trace' on a tigerlake laptop goes from 325 down to 255. The reduction
will be larger for machines with many PMUs, particularly replicated
uncore PMUs.

Ensure pmu_aliases_parse() is called before all uses of the aliases
list, but remove some "pmu->sysfs_aliases_loaded" tests as they are now
part of the function.

Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240502213507.2339733-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: d9c5f5f94c2d ("perf pmu: Count sys and cpuid JSON events separately")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

perf tools: Add/use PMU reverse lookup from config to name

[ Upstream commit 67ee8e71daabb8632931b7559e5c8a4b69a427f8 ]

Add perf_pmu__name_from_config that does a reverse lookup from a
config numbe

perf tools: Add/use PMU reverse lookup from config to name

[ Upstream commit 67ee8e71daabb8632931b7559e5c8a4b69a427f8 ]

Add perf_pmu__name_from_config that does a reverse lookup from a
config number to an alias name. The lookup is expensive as the config
is computed for every alias by filling in a perf_event_attr, but this
is only done when verbose output is enabled. The lookup also only
considers config, and not config1, config2 or config3.

An example of the output:

$ perf stat -vv -e data_read true
...
perf_event_attr:
type 24 (uncore_imc_free_running_0)
size 136
config 0x20ff (data_read)
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
exclude_guest 1
...

Committer notes:

Fix the python binding build by adding dummies for not strictly
needed perf_pmu__name_from_config() and perf_pmus__find_by_type().

Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20240308001915.4060155-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: d9c5f5f94c2d ("perf pmu: Count sys and cpuid JSON events separately")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

perf pmu: "Compat" supports regular expression matching identifiers

[ Upstream commit 2879ff36f5ed80deec5f9d82a7a4107f2347630e ]

The jevent "Compat" is used for uncore PMU alias or metric definitio

perf pmu: "Compat" supports regular expression matching identifiers

[ Upstream commit 2879ff36f5ed80deec5f9d82a7a4107f2347630e ]

The jevent "Compat" is used for uncore PMU alias or metric definitions.

The same PMU driver has different PMU identifiers due to different
hardware versions and types, but they may have some common PMU event.
Since a Compat value can only match one identifier, when adding the
same event alias to PMUs with different identifiers, each identifier
needs to be defined once, which is not streamlined enough.

So let "Compat" support using regular expression to match identifiers
for uncore PMU alias. For example, if the "Compat" value is set to
"43401|43c01", it would be able to match PMU identifiers such as "43401"
or "43c01", which correspond to CMN600_r0p0 or CMN700_r0p0.

Signed-off-by: Jing Zhang <renyu.zj@linux.alibaba.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Shuai Xue <xueshuai@linux.alibaba.com>
Cc: Zhuo Song <zhuo.song@linux.alibaba.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-doc@vger.kernel.org
Link: https://lore.kernel.org/r/1695794391-34817-2-git-send-email-renyu.zj@linux.alibaba.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Stable-dep-of: d9c5f5f94c2d ("perf pmu: Count sys and cpuid JSON events separately")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

perf pmu: Move pmu__find_core_pmu() to pmus.c

[ Upstream commit 3d0f5f456a5786573ba6a3358178c8db580e4b85 ]

pmu__find_core_pmu() more logically belongs in pmus.c because it
iterates over all PMUs, s

perf pmu: Move pmu__find_core_pmu() to pmus.c

[ Upstream commit 3d0f5f456a5786573ba6a3358178c8db580e4b85 ]

pmu__find_core_pmu() more logically belongs in pmus.c because it
iterates over all PMUs, so move it to pmus.c

At the same time rename it to perf_pmus__find_core_pmu() to match the
naming convention in this file.

list_prepare_entry() can't be used in perf_pmus__scan_core() anymore now
that it's called from the same compilation unit. This is with -O2
(specifically -O1 -ftree-vrp -finline-functions
-finline-small-functions) which allow the bounds of the array
access to be determined at compile time. list_prepare_entry() subtracts
the offset of the 'list' member in struct perf_pmu from &core_pmus,
which isn't a struct perf_pmu. The compiler sees that pmu results in
&core_pmus - 8 and refuses to compile. At runtime this works because
list_for_each_entry_continue() always adds the offset back again before
dereferencing ->next, but it's technically undefined behavior. With
-fsanitize=undefined an additional warning is generated.

Using list_first_entry_or_null() to get the first entry here avoids
doing &core_pmus - 8 but has the same result and fixes both the compile
warning and the undefined behavior warning. There are other uses of
list_prepare_entry() in pmus.c, but the compiler doesn't seem to be
able to see that they can also be called with &core_pmus, so I won't
change any at this time.

Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Haixin Yu <yuhaixin.yhx@linux.alibaba.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230913153355.138331-2-james.clark@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Stable-dep-of: d9c5f5f94c2d ("perf pmu: Count sys and cpuid JSON events separately")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

perf pmu: Count sys and cpuid JSON events separately

[ Upstream commit d9c5f5f94c2d356fdf3503f7fcaf254512bc032d ]

Sys events are eagerly loaded as each event has a compat option that may
mean the e

perf pmu: Count sys and cpuid JSON events separately

[ Upstream commit d9c5f5f94c2d356fdf3503f7fcaf254512bc032d ]

Sys events are eagerly loaded as each event has a compat option that may
mean the event is or isn't associated with the PMU.

These shouldn't be counted as loaded_json_events as that is used for
JSON events matching the CPUID that may or may not have been loaded. The
mismatch causes issues on ARM64 that uses sys events.

Fixes: e6ff1eed3584362d ("perf pmu: Lazily add JSON events")
Closes: https://lore.kernel.org/lkml/20240510024729.1075732-1-justin.he@arm.com/
Reported-by: Jia He <justin.he@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240511003601.2666907-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

perf pmu: Assume sysfs events are always the same case

[ Upstream commit 7b6dd7a923281a7ccb980a0f768d6926721eb3cc ]

Perf event names aren't case sensitive. For sysfs events the entire
directory of

perf pmu: Assume sysfs events are always the same case

[ Upstream commit 7b6dd7a923281a7ccb980a0f768d6926721eb3cc ]

Perf event names aren't case sensitive. For sysfs events the entire
directory of events is read then iterated comparing names in a case
insensitive way, most often to see if an event is present.

Consider:

$ perf stat -e inst_retired.any true

The event inst_retired.any may be present in any PMU, so every PMU's
sysfs events are loaded and then searched with strcasecmp to see if
any match. This event is only present on the cpu PMU as a JSON event
so a lot of events were loaded from sysfs unnecessarily just to prove
an event didn't exist there.

This change avoids loading all the events by assuming sysfs event
names are always either lower or uppercase. It uses file exists and
only loads the events when the desired event is present.

For the example above, the number of openat calls measured by 'perf
trace' on a tigerlake laptop goes from 325 down to 255. The reduction
will be larger for machines with many PMUs, particularly replicated
uncore PMUs.

Ensure pmu_aliases_parse() is called before all uses of the aliases
list, but remove some "pmu->sysfs_aliases_loaded" tests as they are now
part of the function.

Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240502213507.2339733-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: d9c5f5f94c2d ("perf pmu: Count sys and cpuid JSON events separately")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

perf tools: Add/use PMU reverse lookup from config to name

[ Upstream commit 67ee8e71daabb8632931b7559e5c8a4b69a427f8 ]

Add perf_pmu__name_from_config that does a reverse lookup from a
config numbe

perf tools: Add/use PMU reverse lookup from config to name

[ Upstream commit 67ee8e71daabb8632931b7559e5c8a4b69a427f8 ]

Add perf_pmu__name_from_config that does a reverse lookup from a
config number to an alias name. The lookup is expensive as the config
is computed for every alias by filling in a perf_event_attr, but this
is only done when verbose output is enabled. The lookup also only
considers config, and not config1, config2 or config3.

An example of the output:

$ perf stat -vv -e data_read true
...
perf_event_attr:
type 24 (uncore_imc_free_running_0)
size 136
config 0x20ff (data_read)
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
exclude_guest 1
...

Committer notes:

Fix the python binding build by adding dummies for not strictly
needed perf_pmu__name_from_config() and perf_pmus__find_by_type().

Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20240308001915.4060155-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: d9c5f5f94c2d ("perf pmu: Count sys and cpuid JSON events separately")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

perf pmu: "Compat" supports regular expression matching identifiers

[ Upstream commit 2879ff36f5ed80deec5f9d82a7a4107f2347630e ]

The jevent "Compat" is used for uncore PMU alias or metric definitio

perf pmu: "Compat" supports regular expression matching identifiers

[ Upstream commit 2879ff36f5ed80deec5f9d82a7a4107f2347630e ]

The jevent "Compat" is used for uncore PMU alias or metric definitions.

The same PMU driver has different PMU identifiers due to different
hardware versions and types, but they may have some common PMU event.
Since a Compat value can only match one identifier, when adding the
same event alias to PMUs with different identifiers, each identifier
needs to be defined once, which is not streamlined enough.

So let "Compat" support using regular expression to match identifiers
for uncore PMU alias. For example, if the "Compat" value is set to
"43401|43c01", it would be able to match PMU identifiers such as "43401"
or "43c01", which correspond to CMN600_r0p0 or CMN700_r0p0.

Signed-off-by: Jing Zhang <renyu.zj@linux.alibaba.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Shuai Xue <xueshuai@linux.alibaba.com>
Cc: Zhuo Song <zhuo.song@linux.alibaba.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-doc@vger.kernel.org
Link: https://lore.kernel.org/r/1695794391-34817-2-git-send-email-renyu.zj@linux.alibaba.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Stable-dep-of: d9c5f5f94c2d ("perf pmu: Count sys and cpuid JSON events separately")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

perf pmu: Move pmu__find_core_pmu() to pmus.c

[ Upstream commit 3d0f5f456a5786573ba6a3358178c8db580e4b85 ]

pmu__find_core_pmu() more logically belongs in pmus.c because it
iterates over all PMUs, s

perf pmu: Move pmu__find_core_pmu() to pmus.c

[ Upstream commit 3d0f5f456a5786573ba6a3358178c8db580e4b85 ]

pmu__find_core_pmu() more logically belongs in pmus.c because it
iterates over all PMUs, so move it to pmus.c

At the same time rename it to perf_pmus__find_core_pmu() to match the
naming convention in this file.

list_prepare_entry() can't be used in perf_pmus__scan_core() anymore now
that it's called from the same compilation unit. This is with -O2
(specifically -O1 -ftree-vrp -finline-functions
-finline-small-functions) which allow the bounds of the array
access to be determined at compile time. list_prepare_entry() subtracts
the offset of the 'list' member in struct perf_pmu from &core_pmus,
which isn't a struct perf_pmu. The compiler sees that pmu results in
&core_pmus - 8 and refuses to compile. At runtime this works because
list_for_each_entry_continue() always adds the offset back again before
dereferencing ->next, but it's technically undefined behavior. With
-fsanitize=undefined an additional warning is generated.

Using list_first_entry_or_null() to get the first entry here avoids
doing &core_pmus - 8 but has the same result and fixes both the compile
warning and the undefined behavior warning. There are other uses of
list_prepare_entry() in pmus.c, but the compiler doesn't seem to be
able to see that they can also be called with &core_pmus, so I won't
change any at this time.

Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Haixin Yu <yuhaixin.yhx@linux.alibaba.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230913153355.138331-2-james.clark@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Stable-dep-of: d9c5f5f94c2d ("perf pmu: Count sys and cpuid JSON events separately")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...