ASoC: tegra: Fix SFC conversion for few rates

Sample rate conversions for rates greater than 48kHz are found to be
failing. It means x->y conversions fail when either x or y is greater
than 48kHz.

ASoC: tegra: Fix SFC conversion for few rates

Sample rate conversions for rates greater than 48kHz are found to be
failing. It means x->y conversions fail when either x or y is greater
than 48kHz.

This happens because, tegra210_sfc_rate_to_idx() returns incorrect
index for rates greater than 48kHz. This actually depends on the
tegra210_sfc_rates[] array and it is not in sync with frequency
values of SFC TX/RX register. To be precise, 64kHz entry is missing
in above array defined in the driver. Due to this wrong index is
returned and this results in incorrect programming of coefficients.

To fix this, align the tegra210_sfc_rates[] array with SFC register
specification and thus add 64kHz entry to it. Also, the coefficient
table is updated to reflect that none of the conversions are supported
for 64kHz.

Fixes: b2f74ec53a6c ("ASoC: tegra: Add Tegra210 based SFC driver")
Cc: stable@vger.kernel.org
Signed-off-by: Sheetal <sheetal@nvidia.com>
Reviewed-by: Mohan Kumar D <mkumard@nvidia.com>
Reviewed-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/Message-Id: <1687433656-7892-2-git-send-email-spujar@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

show more ...

ASoC: tegra: tegra210_sfc: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible

ASoC: tegra: tegra210_sfc: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-159-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>

show more ...

ASoC: tegra: Use normal system sleep for SFC

The driver currently subscribes for a late system sleep call.
The initcall_debug log shows that suspend call for SFC device
happens after the parent devi

ASoC: tegra: Use normal system sleep for SFC

The driver currently subscribes for a late system sleep call.
The initcall_debug log shows that suspend call for SFC device
happens after the parent device (AHUB). This seems to cause
suspend failure on Jetson TX2 platform. Also there is no use
of having late system sleep specifically for SFC device. Fix
the order by using normal system sleep.

Fixes: b2f74ec53a6c ("ASoC: tegra: Add Tegra210 based SFC driver")
Cc: stable@vger.kernel.org
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1637676459-31191-3-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>

show more ...

ASoC: tegra: Fix kcontrol put callback in SFC

The kcontrol put callback is expected to return 1 when there is change
in HW or when the update is acknowledged by driver. This would ensure
that change

ASoC: tegra: Fix kcontrol put callback in SFC

The kcontrol put callback is expected to return 1 when there is change
in HW or when the update is acknowledged by driver. This would ensure
that change notifications are sent to subscribed applications. Filter
out duplicate updates in SFC driver.

Fixes: b2f74ec53a6c ("ASoC: tegra: Add Tegra210 based SFC driver")
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Suggested-by: Jaroslav Kysela <perex@perex.cz>
Suggested-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/1637219231-406-14-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>

show more ...

ASoC: tegra: Fix wrong value type in SFC

The enum controls are expected to use enumerated value type.
Update relevant references in control get/put callbacks.

Fixes: b2f74ec53a6c ("ASoC: tegra: Add

ASoC: tegra: Fix wrong value type in SFC

The enum controls are expected to use enumerated value type.
Update relevant references in control get/put callbacks.

Fixes: b2f74ec53a6c ("ASoC: tegra: Add Tegra210 based SFC driver")
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/1637219231-406-6-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>

show more ...

ASoC: tegra: Constify static snd_soc_dai_ops structs

The only usage of these is to assign their address to the ops field in
the snd_soc_dai_driver struct, which is a pointer to const. Make them
cons

ASoC: tegra: Constify static snd_soc_dai_ops structs

The only usage of these is to assign their address to the ops field in
the snd_soc_dai_driver struct, which is a pointer to const. Make them
const to allow the compiler to put them in read-only memory.

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Acked-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/20210922205438.34519-1-rikard.falkeborn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

show more ...

ASoC: tegra: Add Tegra210 based SFC driver

The Sampling Frequency Converter (SFC) converts the sampling frequency
of the input signal from one frequency to another. It supports sampling
frequency co

ASoC: tegra: Add Tegra210 based SFC driver

The Sampling Frequency Converter (SFC) converts the sampling frequency
of the input signal from one frequency to another. It supports sampling
frequency conversions of streams of up to two channels (stereo).

This patch registers SFC driver with ASoC framework. The component driver
exposes DAPM widgets, routes and kcontrols for the device. The DAI driver
exposes SFC interfaces, which can be used to connect different components
in the ASoC layer. Makefile and Kconfig support is added to allow build
the driver. It can be enabled in the DT via "nvidia,tegra210-sfc"
compatible binding.

Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1631551342-25469-8-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>

show more ...