Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2 |
|
#
a382285b |
| 11-Nov-2021 |
Jack Yu <jack.yu@realtek.com> |
ASoC: rt1011: revert 'I2S Reference' to SOC_ENUM_EXT
Revert 'I2S Reference' to SOC_ENUM_EXT because the settings are specific for some platforms, the default setting for 'I2S Reference' does nothing
ASoC: rt1011: revert 'I2S Reference' to SOC_ENUM_EXT
Revert 'I2S Reference' to SOC_ENUM_EXT because the settings are specific for some platforms, the default setting for 'I2S Reference' does nothing, only some SoC platform need to configure it. Previous 'I2S Reference' in SOC_ENUM format only toggles one bit of RT1011_TDM1_SET_1 register, which isn't enough for specific platform.
Signed-off-by: Jack Yu <jack.yu@realtek.com> Link: https://lore.kernel.org/r/20211111091705.20879-1-jack.yu@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
Revision tags: v5.15.1, v5.15, v5.14.14, v5.14.13 |
|
#
f05a9b85 |
| 13-Oct-2021 |
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> |
ASoC: rt1011: Fix 'I2S Reference' enum control
There are several things the patch adding the support for 'I2S Reference' got wrong: - "None" selection is in fact equals to last selected reference -
ASoC: rt1011: Fix 'I2S Reference' enum control
There are several things the patch adding the support for 'I2S Reference' got wrong: - "None" selection is in fact equals to last selected reference - The custom put overrides RX/TX len, TDM slot sizes, etc - the enum is useless in most part for the reference tracking - there is no need for EXT control as there is a single bit in RT1011_TDM1_SET_1 register (bit 7) which selects the reference - it was using ucontrol->value.integer.value[0] in the put/get callbacks which causesed access to 'I2S Reference' enum with alsamixer to fail
Complements: c3de683c4d1d ("ASoC: rt1011: Fix 'I2S Reference' enum control caused error") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20211013123300.11095-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
Revision tags: v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63 |
|
#
87f40af2 |
| 06-Sep-2021 |
Jack Yu <jack.yu@realtek.com> |
ASoC: rt1011: add i2s reference control for rt1011
Add i2s reference control for rt1011 amp.
Signed-off-by: Jack Yu <jack.yu@realtek.com> Link: https://lore.kernel.org/r/20210906101208.11585-1-jack
ASoC: rt1011: add i2s reference control for rt1011
Add i2s reference control for rt1011 amp.
Signed-off-by: Jack Yu <jack.yu@realtek.com> Link: https://lore.kernel.org/r/20210906101208.11585-1-jack.yu@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
Revision tags: v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30 |
|
#
44de8d80 |
| 08-Apr-2021 |
Jack Yu <jack.yu@realtek.com> |
ASoC: rt1011: remove pack_id check in rt1011
For latest design, different package could use the same setting, therefore the check of pack_id will no longer be used.
Signed-off-by: Jack Yu <jack.yu@
ASoC: rt1011: remove pack_id check in rt1011
For latest design, different package could use the same setting, therefore the check of pack_id will no longer be used.
Signed-off-by: Jack Yu <jack.yu@realtek.com> Link: https://lore.kernel.org/r/4cbe1cd3b8664140889132464c7dee7b@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
Revision tags: v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13 |
|
#
0e4ba029 |
| 16-Jan-2020 |
Shuming Fan <shumingf@realtek.com> |
ASoC: rt1011: set the different setting for QFN/WLCSP package
The QFN package is a new one. There is a different initial setting to the chip of QFN and WLCSP package.
Signed-off-by: Shuming Fan <sh
ASoC: rt1011: set the different setting for QFN/WLCSP package
The QFN package is a new one. There is a different initial setting to the chip of QFN and WLCSP package.
Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20200116091854.18095-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
Revision tags: v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7 |
|
#
8de6e755 |
| 16-Oct-2019 |
Shuming Fan <shumingf@realtek.com> |
ASoC: rt1011: Read and apply r0 and temperature device property
Typically, the r0 (calibration data) and temperature were measured in the factory. This information is written into the non-volatile a
ASoC: rt1011: Read and apply r0 and temperature device property
Typically, the r0 (calibration data) and temperature were measured in the factory. This information is written into the non-volatile area where keeps data whether factory reset or OS update. In Chromium OS case, the coreboot will read the info from VPD and create the device property for each rt1011.
Signed-off-by: Shuming Fan <shumingf@realtek.com> Tested-By: Cheng-Yi Chiang <cychiang@chromium.org> Link: https://lore.kernel.org/r/20191016085845.11672-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
#
81bd644f |
| 16-Oct-2019 |
Shuming Fan <shumingf@realtek.com> |
ASoC: rt1011: set tx/rx slots from tx/rx_mask in TDM case
The TX/RX slot configuration use tx/rx_mask which requested by the machine driver.
Signed-off-by: Shuming Fan <shumingf@realtek.com> Link:
ASoC: rt1011: set tx/rx slots from tx/rx_mask in TDM case
The TX/RX slot configuration use tx/rx_mask which requested by the machine driver.
Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20191016085754.11614-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
Revision tags: v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7 |
|
#
0922c7a5 |
| 06-Aug-2019 |
Shuming Fan <shumingf@realtek.com> |
ASoC: rt1011: Add a flag for the R0 calibration test
The factory test needs to know whether the calibration completed. This flag helps to confirm the calibration completed or not.
Signed-off-by: Sh
ASoC: rt1011: Add a flag for the R0 calibration test
The factory test needs to know whether the calibration completed. This flag helps to confirm the calibration completed or not.
Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20190806091459.14382-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
#
3403b808 |
| 06-Aug-2019 |
Shuming Fan <shumingf@realtek.com> |
ASoC: rt1011: Add R0 temperature and TDM1 ADC2DAT Swap control
- The user level application could set the R0 temperature after booting system. The degree Celsius of R0 temperature store in the non
ASoC: rt1011: Add R0 temperature and TDM1 ADC2DAT Swap control
- The user level application could set the R0 temperature after booting system. The degree Celsius of R0 temperature store in the non-volatile space when doing R0 calibration. - TDM1 ADC2DAT Swap controls use to control TDM slot2/3 data
Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20190806091435.14329-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
Revision tags: v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6 |
|
#
d6e65bb7 |
| 27-May-2019 |
Shuming Fan <shumingf@realtek.com> |
ASoC: rt1011: Add RT1011 amplifier driver
This is the initial amplifier driver for rt1011.
Signed-off-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
|
Revision tags: v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13 |
|
#
0e4ba029 |
| 16-Jan-2020 |
Shuming Fan <shumingf@realtek.com> |
ASoC: rt1011: set the different setting for QFN/WLCSP package The QFN package is a new one. There is a different initial setting to the chip of QFN and WLCSP package. Signed-off
ASoC: rt1011: set the different setting for QFN/WLCSP package The QFN package is a new one. There is a different initial setting to the chip of QFN and WLCSP package. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20200116091854.18095-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
Revision tags: v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7 |
|
#
8de6e755 |
| 16-Oct-2019 |
Shuming Fan <shumingf@realtek.com> |
ASoC: rt1011: Read and apply r0 and temperature device property Typically, the r0 (calibration data) and temperature were measured in the factory. This information is written into the no
ASoC: rt1011: Read and apply r0 and temperature device property Typically, the r0 (calibration data) and temperature were measured in the factory. This information is written into the non-volatile area where keeps data whether factory reset or OS update. In Chromium OS case, the coreboot will read the info from VPD and create the device property for each rt1011. Signed-off-by: Shuming Fan <shumingf@realtek.com> Tested-By: Cheng-Yi Chiang <cychiang@chromium.org> Link: https://lore.kernel.org/r/20191016085845.11672-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
#
81bd644f |
| 16-Oct-2019 |
Shuming Fan <shumingf@realtek.com> |
ASoC: rt1011: set tx/rx slots from tx/rx_mask in TDM case The TX/RX slot configuration use tx/rx_mask which requested by the machine driver. Signed-off-by: Shuming Fan <shumingf
ASoC: rt1011: set tx/rx slots from tx/rx_mask in TDM case The TX/RX slot configuration use tx/rx_mask which requested by the machine driver. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20191016085754.11614-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
Revision tags: v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7 |
|
#
0922c7a5 |
| 06-Aug-2019 |
Shuming Fan <shumingf@realtek.com> |
ASoC: rt1011: Add a flag for the R0 calibration test The factory test needs to know whether the calibration completed. This flag helps to confirm the calibration completed or not.
ASoC: rt1011: Add a flag for the R0 calibration test The factory test needs to know whether the calibration completed. This flag helps to confirm the calibration completed or not. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20190806091459.14382-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
#
3403b808 |
| 06-Aug-2019 |
Shuming Fan <shumingf@realtek.com> |
ASoC: rt1011: Add R0 temperature and TDM1 ADC2DAT Swap control - The user level application could set the R0 temperature after booting system. The degree Celsius of R0 temperature stor
ASoC: rt1011: Add R0 temperature and TDM1 ADC2DAT Swap control - The user level application could set the R0 temperature after booting system. The degree Celsius of R0 temperature store in the non-volatile space when doing R0 calibration. - TDM1 ADC2DAT Swap controls use to control TDM slot2/3 data Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20190806091435.14329-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
Revision tags: v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6 |
|
#
d6e65bb7 |
| 27-May-2019 |
Shuming Fan <shumingf@realtek.com> |
ASoC: rt1011: Add RT1011 amplifier driver This is the initial amplifier driver for rt1011. Signed-off-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Mark Brown <broonie@k
ASoC: rt1011: Add RT1011 amplifier driver This is the initial amplifier driver for rt1011. Signed-off-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|