|
Revision tags: v6.6.25, v6.6.24, v6.6.23 |
|
| #
9fe96db9 |
| 13-Feb-2024 |
Conor Dooley <conor.dooley@microchip.com> |
riscv: dts: sifive: add missing #interrupt-cells to pmic
[ Upstream commit ce6b6d1513965f500a05f3facf223fa01fd74920 ]
At W=2 dtc complains:
hifive-unmatched-a00.dts:120.10-238.4: Warning (interrupt
riscv: dts: sifive: add missing #interrupt-cells to pmic
[ Upstream commit ce6b6d1513965f500a05f3facf223fa01fd74920 ]
At W=2 dtc complains:
hifive-unmatched-a00.dts:120.10-238.4: Warning (interrupt_provider): /soc/i2c@10030000/pmic@58: Missing '#interrupt-cells' in interrupt provider
Add the missing property.
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
|
Revision tags: v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53 |
|
| #
2cfe9bbe |
| 05-Jul-2022 |
Emil Renner Berthing <emil.renner.berthing@canonical.com> |
riscv: dts: sifive unmatched: Add PWM controlled LEDs
This adds the two PWM controlled LEDs to the HiFive Unmatched device
tree. D12 is just a regular green diode, but D2 is an RGB diode with 3
PWM
riscv: dts: sifive unmatched: Add PWM controlled LEDs
This adds the two PWM controlled LEDs to the HiFive Unmatched device
tree. D12 is just a regular green diode, but D2 is an RGB diode with 3
PWM inputs controlling the three different colours.
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Pavel Machek <pavel@ucw.cz>
Tested-by: Ron Economos <re@w6rz.net>
Link: https://lore.kernel.org/r/20220705210143.315151-5-emil.renner.berthing@canonical.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
show more ...
|
|
Revision tags: v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46 |
|
| #
b4981661 |
| 06-Jun-2022 |
Conor Dooley <conor.dooley@microchip.com> |
riscv: dts: sifive: "fix" pmic watchdog node name
After converting the pmic watchdog binding to yaml, dtbs_check complains
that the node name doesn't match the binding. "Fix" it.
Reviewed-by: Krzys
riscv: dts: sifive: "fix" pmic watchdog node name
After converting the pmic watchdog binding to yaml, dtbs_check complains
that the node name doesn't match the binding. "Fix" it.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220606201343.514391-5-mail@conchuod.ie
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
show more ...
|
|
Revision tags: v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16 |
|
| #
db3f02df |
| 31-Dec-2021 |
Ron Economos <w6rz@comcast.net> |
riscv: dts: sifive unmatched: Add gpio poweroff
Some of the GPIO pins on the Unmatched are wire up to control the power
of the board, indicate that in the device tree.
Signed-off-by: Ron Economos <
riscv: dts: sifive unmatched: Add gpio poweroff
Some of the GPIO pins on the Unmatched are wire up to control the power
of the board, indicate that in the device tree.
Signed-off-by: Ron Economos <w6rz@comcast.net>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
show more ...
|
|
Revision tags: v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3 |
|
| #
f6f7fbb8 |
| 16-Nov-2021 |
Vincent Pelletier <plr.vincent@gmail.com> |
riscv: dts: sifive unmatched: Link the tmp451 with its power supply
Fixes the following probe warning:
lm90 0-004c: Looking up vcc-supply from device tree
lm90 0-004c: Looking up vcc-supply prop
riscv: dts: sifive unmatched: Link the tmp451 with its power supply
Fixes the following probe warning:
lm90 0-004c: Looking up vcc-supply from device tree
lm90 0-004c: Looking up vcc-supply property in node /soc/i2c@10030000/temperature-sensor@4c failed
lm90 0-004c: supply vcc not found, using dummy regulator
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
show more ...
|
| #
ad931d9b |
| 16-Nov-2021 |
Vincent Pelletier <plr.vincent@gmail.com> |
riscv: dts: sifive unmatched: Fix regulator for board rev3
The existing values are rejected by the da9063 regulator driver, as they
are unachievable with the declared chip setup (non-merged vcore an
riscv: dts: sifive unmatched: Fix regulator for board rev3
The existing values are rejected by the da9063 regulator driver, as they
are unachievable with the declared chip setup (non-merged vcore and bmem
are unable to provide the declared curent).
Fix voltages to match rev3 schematics, which also matches their boot-up
configuration within the chip's available precision.
Declare bcore1/bcore2 and bmem/bio as merged.
Set ldo09 and ldo10 as always-on as their consumers are not declared but
exist.
Drop ldo current limits as there is no current limit feature for these
regulators in the DA9063. Fixes warnings like:
DA9063_LDO3: Operation of current configuration missing
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
show more ...
|
| #
cd29cc8a |
| 16-Nov-2021 |
Vincent Pelletier <plr.vincent@gmail.com> |
riscv: dts: sifive unmatched: Expose the PMIC sub-functions
These sub-functions are available in the chip revision on this board, so
expose them.
Signed-off-by: Vincent Pelletier <plr.vincent@gmail
riscv: dts: sifive unmatched: Expose the PMIC sub-functions
These sub-functions are available in the chip revision on this board, so
expose them.
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
show more ...
|
| #
8120393b |
| 16-Nov-2021 |
Vincent Pelletier <plr.vincent@gmail.com> |
riscv: dts: sifive unmatched: Expose the board ID eeprom
Mark it as read-only as it is factory-programmed with identifying
information, and no executable nor configuration:
- eth MAC address
- board
riscv: dts: sifive unmatched: Expose the board ID eeprom
Mark it as read-only as it is factory-programmed with identifying
information, and no executable nor configuration:
- eth MAC address
- board model (PCB version, BoM version)
- board serial number
Accidental modification would cause misidentification which could brick
the board, so marking read-only seem like both a safe and non-constraining
choice.
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
show more ...
|
| #
ea81b91e |
| 16-Nov-2021 |
Vincent Pelletier <plr.vincent@gmail.com> |
riscv: dts: sifive unmatched: Name gpio lines
Follow the pin descriptions given in the version 3 of the board schematics.
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: Pal
riscv: dts: sifive unmatched: Name gpio lines
Follow the pin descriptions given in the version 3 of the board schematics.
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
show more ...
|
|
Revision tags: v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46 |
|
| #
298d03c2 |
| 16-Jun-2021 |
Bin Meng <bin.meng@windriver.com> |
riscv: dts: unmatched: Add gpio card detect to mmc-spi-slot
Per HiFive Unmatched schematics, the card detect signal of the
micro SD card is connected to gpio pin #15, which should be
reflected in th
riscv: dts: unmatched: Add gpio card detect to mmc-spi-slot
Per HiFive Unmatched schematics, the card detect signal of the
micro SD card is connected to gpio pin #15, which should be
reflected in the DT via the <gpios> property, as described in
Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt.
[1] https://sifive.cdn.prismic.io/sifive/6a06d6c0-6e66-49b5-8e9e-e68ce76f4192_hifive-unmatched-schematics-v3.pdf
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Fixes: d573b5558abb ("riscv: dts: add initial board data for the SiFive HiFive Unmatched")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
show more ...
|
| #
dacef016 |
| 08-Nov-2021 |
Aurelien Jarno <aurelien@aurel32.net> |
riscv: dts: enable more DA9063 functions for the SiFive HiFive Unmatched
The DA9063 PMIC found on the SiFive HiFive Unmatched also provides an
RTC, a watchdog and the power button input.
Signed-off
riscv: dts: enable more DA9063 functions for the SiFive HiFive Unmatched
The DA9063 PMIC found on the SiFive HiFive Unmatched also provides an
RTC, a watchdog and the power button input.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
show more ...
|
| #
20ce65bf |
| 20-Sep-2021 |
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> |
riscv: dts: sifive: drop duplicated nodes and properties in sifive
The DTSI file defines soc node and address/size cells, so there is no
point in duplicating it in DTS file.
Signed-off-by: Krzyszto
riscv: dts: sifive: drop duplicated nodes and properties in sifive
The DTSI file defines soc node and address/size cells, so there is no
point in duplicating it in DTS file.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Tested-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Link: https://lore.kernel.org/r/20210920130248.145058-3-krzysztof.kozlowski@canonical.com
show more ...
|
| #
8ce936c2 |
| 20-Sep-2021 |
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> |
riscv: dts: sifive: use only generic JEDEC SPI NOR flash compatible
The compatible "issi,is25wp256" is undocumented and instead only a
generic jedec,spi-nor should be used (if appropriate).
Signed-
riscv: dts: sifive: use only generic JEDEC SPI NOR flash compatible
The compatible "issi,is25wp256" is undocumented and instead only a
generic jedec,spi-nor should be used (if appropriate).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210920130248.145058-1-krzysztof.kozlowski@canonical.com
show more ...
|
| #
4a74df77 |
| 16-Jun-2021 |
Bin Meng <bin.meng@windriver.com> |
riscv: dts: unmatched: Add gpio card detect to mmc-spi-slot
commit 298d03c2d7f1b5daacb6d4f4053fd3d677d67087 upstream.
Per HiFive Unmatched schematics, the card detect signal of the
micro SD card is
riscv: dts: unmatched: Add gpio card detect to mmc-spi-slot
commit 298d03c2d7f1b5daacb6d4f4053fd3d677d67087 upstream.
Per HiFive Unmatched schematics, the card detect signal of the
micro SD card is connected to gpio pin #15, which should be
reflected in the DT via the <gpios> property, as described in
Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt.
[1] https://sifive.cdn.prismic.io/sifive/6a06d6c0-6e66-49b5-8e9e-e68ce76f4192_hifive-unmatched-schematics-v3.pdf
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Fixes: d573b5558abb ("riscv: dts: add initial board data for the SiFive HiFive Unmatched")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
| #
d0956043 |
| 04-Jul-2021 |
Qiu Wenbo <qiuwenbo@kylinos.com.cn> |
riscv: dts: fix memory size for the SiFive HiFive Unmatched
The production version of HiFive Unmatched have 16GB memory.
Signed-off-by: Qiu Wenbo <qiuwenbo@kylinos.com.cn>
Signed-off-by: Palmer Dab
riscv: dts: fix memory size for the SiFive HiFive Unmatched
The production version of HiFive Unmatched have 16GB memory.
Signed-off-by: Qiu Wenbo <qiuwenbo@kylinos.com.cn>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
show more ...
|
|
Revision tags: v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10 |
|
| #
d573b555 |
| 07-Dec-2020 |
Yash Shah <yash.shah@sifive.com> |
riscv: dts: add initial board data for the SiFive HiFive Unmatched
Add initial board data for the SiFive HiFive Unmatched A00.
This patch is dependent on Zong's Patchset[0].
[0]: https://lore.kerne
riscv: dts: add initial board data for the SiFive HiFive Unmatched
Add initial board data for the SiFive HiFive Unmatched A00.
This patch is dependent on Zong's Patchset[0].
[0]: https://lore.kernel.org/linux-riscv/20201130082330.77268-4-zong.li@sifive.com/T/#u
Signed-off-by: Yash Shah <yash.shah@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
show more ...
|