Revision tags: v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6 |
|
#
86bc917d |
| 23-Jun-2020 |
Michael Ellerman <mpe@ellerman.id.au> |
powerpc/boot/dts: Fix dtc "pciex" warnings
With CONFIG_OF_ALL_DTBS=y, as set by eg. allmodconfig, we see lots of warnings about our dts files, such as:
arch/powerpc/boot/dts/glacier.dts:492.26-53
powerpc/boot/dts: Fix dtc "pciex" warnings
With CONFIG_OF_ALL_DTBS=y, as set by eg. allmodconfig, we see lots of warnings about our dts files, such as:
arch/powerpc/boot/dts/glacier.dts:492.26-532.5: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie"
The node name should not particularly matter, it's just a name, and AFAICS there's no kernel code that cares whether nodes are *named* "pciex" or "pcie". So shutup these warnings by converting to the name dtc wants.
As always there's some risk this could break something obscure that does rely on the name, in which case we can revert.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200623130320.405852-1-mpe@ellerman.id.au
show more ...
|
Revision tags: v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16, v4.15 |
|
#
600ecc19 |
| 14-Dec-2017 |
Mathieu Malaterre <malat@debian.org> |
powerpc/boot/dts: Remove leading 0x and 0s from bindings notation
Improve the DTS files by removing all the leading "0x" and zeros to fix the following dtc warnings:
Warning (unit_address_format)
powerpc/boot/dts: Remove leading 0x and 0s from bindings notation
Improve the DTS files by removing all the leading "0x" and zeros to fix the following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and:
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -E -i -e "s/@0x([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" -e "s/@0+([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" {} +
For simplicity, two sed expressions were used to solve each warnings separately.
To make the regex expression more robust a few other issues were resolved, namely setting unit-address to lower case, and adding a whitespace before the the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
Reported-by: David Daney <ddaney@caviumnetworks.com> Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
show more ...
|
Revision tags: v4.13.16, v4.14, v4.13.5, v4.13, v4.12, v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10, v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28, v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4, v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1, v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1, openbmc-20160713-1, v4.4.15, v4.6.4, v4.6.3, v4.4.14, v4.6.2, v4.4.13, openbmc-20160606-1, v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8, v4.4.7, openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6, v4.5, v4.4.5, v4.4.4, v4.4.3, openbmc-20160222-1, v4.4.2, openbmc-20160212-1, openbmc-20160210-1, openbmc-20160202-2, openbmc-20160202-1, v4.4.1, openbmc-20160127-1, openbmc-20160120-1, v4.4, openbmc-20151217-1, openbmc-20151210-1, openbmc-20151202-1, openbmc-20151123-1, openbmc-20151118-1, openbmc-20151104-1, v4.3, openbmc-20151102-1, openbmc-20151028-1, v4.3-rc1, v4.2, v4.2-rc8, v4.2-rc7, v4.2-rc6, v4.2-rc5, v4.2-rc4, v4.2-rc3, v4.2-rc2, v4.2-rc1, v4.1, v4.1-rc8, v4.1-rc7, v4.1-rc6, v4.1-rc5, v4.1-rc4, v4.1-rc3, v4.1-rc2, v4.1-rc1, v4.0, v4.0-rc7, v4.0-rc6, v4.0-rc5, v4.0-rc4, v4.0-rc3, v4.0-rc2, v4.0-rc1, v3.19, v3.19-rc7, v3.19-rc6, v3.19-rc5, v3.19-rc4, v3.19-rc3, v3.19-rc2, v3.19-rc1, v3.18, v3.18-rc7, v3.18-rc6, v3.18-rc5, v3.18-rc4, v3.18-rc3, v3.18-rc2, v3.18-rc1, v3.17, v3.17-rc7, v3.17-rc6, v3.17-rc5, v3.17-rc4, v3.17-rc3, v3.17-rc2, v3.17-rc1, v3.16, v3.16-rc7, v3.16-rc6, v3.16-rc5, v3.16-rc4, v3.16-rc3, v3.16-rc2, v3.16-rc1, v3.15, v3.15-rc8, v3.15-rc7, v3.15-rc6, v3.15-rc5, v3.15-rc4, v3.15-rc3, v3.15-rc2, v3.15-rc1, v3.14, v3.14-rc8, v3.14-rc7, v3.14-rc6, v3.14-rc5, v3.14-rc4, v3.14-rc3, v3.14-rc2, v3.14-rc1, v3.13, v3.13-rc8, v3.13-rc7, v3.13-rc6, v3.13-rc5, v3.13-rc4, v3.13-rc3, v3.13-rc2, v3.13-rc1, v3.12, v3.12-rc7, v3.12-rc6, v3.12-rc5, v3.12-rc4, v3.12-rc3, v3.12-rc2, v3.12-rc1, v3.11, v3.11-rc7, v3.11-rc6, v3.11-rc5, v3.11-rc4, v3.11-rc3, v3.11-rc2, v3.11-rc1, v3.10, v3.10-rc7, v3.10-rc6, v3.10-rc5, v3.10-rc4, v3.10-rc3, v3.10-rc2, v3.10-rc1, v3.9, v3.9-rc8, v3.9-rc7, v3.9-rc6, v3.9-rc5, v3.9-rc4, v3.9-rc3, v3.9-rc2, v3.9-rc1, v3.8, v3.8-rc7, v3.8-rc6, v3.8-rc5, v3.8-rc4, v3.8-rc3, v3.8-rc2, v3.8-rc1, v3.7, v3.7-rc8, v3.7-rc7, v3.7-rc6, v3.7-rc5, v3.7-rc4, v3.7-rc3, v3.7-rc2, v3.7-rc1, v3.6, v3.6-rc7, v3.6-rc6, v3.6-rc5, v3.6-rc4, v3.6-rc3, v3.6-rc2, v3.6-rc1, v3.5, v3.5-rc7, v3.5-rc6, v3.5-rc5, v3.5-rc4, v3.5-rc3, v3.5-rc2, v3.5-rc1, v3.4, v3.4-rc7, v3.4-rc6, v3.4-rc5, v3.4-rc4, v3.4-rc3, v3.4-rc2, v3.4-rc1, v3.3, v3.3-rc7, v3.3-rc6, v3.3-rc5, v3.3-rc4, v3.3-rc3, v3.3-rc2, v3.3-rc1, v3.2, v3.2-rc7, v3.2-rc6, v3.2-rc5, v3.2-rc4, v3.2-rc3, v3.2-rc2, v3.2-rc1, v3.1, v3.1-rc10, v3.1-rc9, v3.1-rc8, v3.1-rc7, v3.1-rc6, v3.1-rc5, v3.1-rc4, v3.1-rc3, v3.1-rc2, v3.1-rc1, v3.0, v3.0-rc7, v3.0-rc6, v3.0-rc5, v3.0-rc4, v3.0-rc3, v3.0-rc2, v3.0-rc1, v2.6.39, v2.6.39-rc7, v2.6.39-rc6, v2.6.39-rc5, v2.6.39-rc4, v2.6.39-rc3, v2.6.39-rc2, v2.6.39-rc1, v2.6.38, v2.6.38-rc8, v2.6.38-rc7, v2.6.38-rc6, v2.6.38-rc5, v2.6.38-rc4, v2.6.38-rc3, v2.6.38-rc2, v2.6.38-rc1, v2.6.37, v2.6.37-rc8, v2.6.37-rc7, v2.6.37-rc6, v2.6.37-rc5, v2.6.37-rc4, v2.6.37-rc3, v2.6.37-rc2, v2.6.37-rc1, v2.6.36, v2.6.36-rc8, v2.6.36-rc7, v2.6.36-rc6, v2.6.36-rc5, v2.6.36-rc4, v2.6.36-rc3, v2.6.36-rc2, v2.6.36-rc1, v2.6.35, v2.6.35-rc6, v2.6.35-rc5, v2.6.35-rc4, v2.6.35-rc3, v2.6.35-rc2, v2.6.35-rc1, v2.6.34, v2.6.34-rc7, v2.6.34-rc6, v2.6.34-rc5, v2.6.34-rc4, v2.6.34-rc3, v2.6.34-rc2, v2.6.34-rc1, v2.6.33, v2.6.33-rc8, v2.6.33-rc7, v2.6.33-rc6, v2.6.33-rc5, v2.6.33-rc4, v2.6.33-rc3, v2.6.33-rc2, v2.6.33-rc1, v2.6.32, v2.6.32-rc8, v2.6.32-rc7, v2.6.32-rc6, v2.6.32-rc5, v2.6.32-rc4 |
|
#
835ad8e7 |
| 08-Oct-2009 |
Dave Mitchell <dmitchell@appliedmicro.com> |
powerpc/4xx: Add 16K FIFO size DTS entries on supported platforms
Adding tx/rx-fifo-size-gige to EMAC fields for evaluation kit DTS files where appropriate.
Signed-off-by: Dave Mitchell <dmitchell@
powerpc/4xx: Add 16K FIFO size DTS entries on supported platforms
Adding tx/rx-fifo-size-gige to EMAC fields for evaluation kit DTS files where appropriate.
Signed-off-by: Dave Mitchell <dmitchell@appliedmicro.com> Acked-by: Prodyut Hazarika <phazarika@appliedmicro.com> Acked-by: Victor Gallardo <vgallardo@appliedmicro.com> Acked-by: Loc Ho <lho@appliedmicro.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
show more ...
|
Revision tags: v2.6.32-rc3, v2.6.32-rc1, v2.6.32-rc2, v2.6.31, v2.6.31-rc9, v2.6.31-rc8, v2.6.31-rc7, v2.6.31-rc6, v2.6.31-rc5, v2.6.31-rc4, v2.6.31-rc3, v2.6.31-rc2, v2.6.31-rc1, v2.6.30, v2.6.30-rc8, v2.6.30-rc7, v2.6.30-rc6, v2.6.30-rc5, v2.6.30-rc4, v2.6.30-rc3, v2.6.30-rc2, v2.6.30-rc1, v2.6.29, v2.6.29-rc8, v2.6.29-rc7, v2.6.29-rc6, v2.6.29-rc5, v2.6.29-rc4, v2.6.29-rc3, v2.6.29-rc2, v2.6.29-rc1, v2.6.28, v2.6.28-rc9 |
|
#
94ce1c58 |
| 18-Dec-2008 |
Grant Erickson <gerickson@nuovations.com> |
powerpc/4xx: DTS: Add Add'l SDRAM0 Compatible and Interrupt Info
Added additional information for type and compatibility strings and interrupt information to the SDRAM0 memory-controller device tree
powerpc/4xx: DTS: Add Add'l SDRAM0 Compatible and Interrupt Info
Added additional information for type and compatibility strings and interrupt information to the SDRAM0 memory-controller device tree nodes for AMCC PowerPC 405EX[r]-based boards to facilitate binding with the new "ibm,sdram-4xx-ddr2" EDAC memory controller adapter driver.
Signed-off-by: Grant Erickson <gerickson@nuovations.com> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
show more ...
|
Revision tags: v2.6.28-rc8, v2.6.28-rc7, v2.6.28-rc6, v2.6.28-rc5, v2.6.28-rc4, v2.6.28-rc3, v2.6.28-rc2, v2.6.28-rc1, v2.6.27, v2.6.27-rc9, v2.6.27-rc8, v2.6.27-rc7, v2.6.27-rc6, v2.6.27-rc5, v2.6.27-rc4, v2.6.27-rc3, v2.6.27-rc2, v2.6.27-rc1, v2.6.26 |
|
#
05781ccd |
| 07-Jul-2008 |
Grant Erickson <gerickson@nuovations.com> |
ibm_newemac: Parameterize EMAC Multicast Match Handling
Various instances of the EMAC core have varying: 1) number of address match slots, 2) width of the registers for handling address match slots,
ibm_newemac: Parameterize EMAC Multicast Match Handling
Various instances of the EMAC core have varying: 1) number of address match slots, 2) width of the registers for handling address match slots, 3) number of registers for handling address match slots and 4) base offset for those registers.
As the driver stands today, it assumes that all EMACs have 4 IAHT and GAHT 32-bit registers, starting at offset 0x30 from the register base, with only 16-bits of each used for a total of 64 match slots.
The 405EX(r) and 460EX now use the EMAC4SYNC core rather than the EMAC4 core. This core has 8 IAHT and GAHT registers, starting at offset 0x80 from the register base, with ALL 32-bits of each used for a total of 256 match slots.
This adds a new compatible device tree entry "emac4sync" and a new, related feature flag "EMAC_FTR_EMAC4SYNC" along with a series of macros and inlines which supply the appropriate parameterized value based on the presence or absence of the EMAC4SYNC feature.
The code has further been reworked where appropriate to use those macros and inlines.
In addition, the register size passed to ioremap is now taken from the device tree:
c4 for EMAC4SYNC cores 74 for EMAC4 cores 70 for EMAC cores
rather than sizeof (emac_regs).
Finally, the device trees have been updated with the appropriate compatible entries and resource sizes.
This has been tested on an AMCC Haleakala board such that: 1) inbound ICMP requests to 'haleakala.local' via MDNS from both Mac OS X 10.4.11 and Ubuntu 8.04 systems as well as 2) outbound ICMP requests from 'haleakala.local' to those same systems in the '.local' domain via MDNS now work.
Signed-off-by: Grant Erickson <gerickson@nuovations.com> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
show more ...
|
Revision tags: v2.6.26-rc9, v2.6.26-rc8, v2.6.26-rc7, v2.6.26-rc6, v2.6.26-rc5, v2.6.26-rc4, v2.6.26-rc3 |
|
#
71f34979 |
| 15-May-2008 |
David Gibson <david@gibson.dropbear.id.au> |
[POWERPC] Convert remaining dts-v0 files to v1
At the moment we have a mixture of left-over version 0 and new-format version 1 files in arch/powerpc/boot/dts. This is potentially confusing to peopl
[POWERPC] Convert remaining dts-v0 files to v1
At the moment we have a mixture of left-over version 0 and new-format version 1 files in arch/powerpc/boot/dts. This is potentially confusing to people new to the dts format attempting to figure it out.
So, this patch converts all the as-yet unconverted dts v0 files and converts them to v1. They're mechanically-converted, and not hand tweaked so in some cases they're not 100% in keeping with usual v1 style, but the convertor program does have some heuristics so the discrepancies aren't too bad.
I have checked that this patch produces no changes to the resulting dtb binaries.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
show more ...
|
Revision tags: v2.6.26-rc2, v2.6.26-rc1, v2.6.25, v2.6.25-rc9 |
|
#
9d7030be |
| 03-Apr-2008 |
Stefan Roese <sr@denx.de> |
[POWERPC] 4xx: Change dts files to support jumbo frames
This patch changes the "max-frame-size" property to 9000 for all gbit enabled 4xx boards. All those ports generally support jumbo frames, so l
[POWERPC] 4xx: Change dts files to support jumbo frames
This patch changes the "max-frame-size" property to 9000 for all gbit enabled 4xx boards. All those ports generally support jumbo frames, so let's give the user a chance to enable it.
Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
show more ...
|
Revision tags: v2.6.25-rc8, v2.6.25-rc7 |
|
#
145692a7 |
| 20-Mar-2008 |
Stefan Roese <sr@denx.de> |
[POWERPC] 4xx: Add "amcc, haleakala" to the toplevel compatible property
Currently Haleakala uses the Kilauea platform code. This patch adds "haleakala" to the compatible property, in case later ker
[POWERPC] 4xx: Add "amcc, haleakala" to the toplevel compatible property
Currently Haleakala uses the Kilauea platform code. This patch adds "haleakala" to the compatible property, in case later kernel versions will introduce a Haleakala platform code.
Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
show more ...
|
Revision tags: v2.6.25-rc6, v2.6.25-rc5, v2.6.25-rc4, v2.6.25-rc3 |
|
#
e33eb074 |
| 20-Feb-2008 |
Stefan Roese <sr@denx.de> |
[POWERPC] 4xx: Fix Haleakala PCIe compatibility problem in dts
Since the 4xx PCIe driver checks for 405ex compatibility, the PCIe interface was not detected as it is currently defined as "405exr" co
[POWERPC] 4xx: Fix Haleakala PCIe compatibility problem in dts
Since the 4xx PCIe driver checks for 405ex compatibility, the PCIe interface was not detected as it is currently defined as "405exr" compatible. This patch changes it to "405ex".
The 405EX and 405EXr are identical exept that the 2nd PCIe and the 2nd EMAC interfaces are missing.
Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
show more ...
|
Revision tags: v2.6.25-rc2, v2.6.25-rc1, v2.6.24 |
|
#
a4095516 |
| 16-Jan-2008 |
Stefan Roese <sr@denx.de> |
[POWERPC] 4xx: Add AMCC Haleakala (405EXr) dts
The patch adds the Haleakala dts. The Haleakala is a stripped down version of the Kilauea (405EX) with only one EMAC and only one PCIe interface.
Sign
[POWERPC] 4xx: Add AMCC Haleakala (405EXr) dts
The patch adds the Haleakala dts. The Haleakala is a stripped down version of the Kilauea (405EX) with only one EMAC and only one PCIe interface.
Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
show more ...
|
Revision tags: v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6 |
|
#
86bc917d |
| 23-Jun-2020 |
Michael Ellerman <mpe@ellerman.id.au> |
powerpc/boot/dts: Fix dtc "pciex" warnings With CONFIG_OF_ALL_DTBS=y, as set by eg. allmodconfig, we see lots of warnings about our dts files, such as: arch/powerpc/boot/dts/g
powerpc/boot/dts: Fix dtc "pciex" warnings With CONFIG_OF_ALL_DTBS=y, as set by eg. allmodconfig, we see lots of warnings about our dts files, such as: arch/powerpc/boot/dts/glacier.dts:492.26-532.5: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie" The node name should not particularly matter, it's just a name, and AFAICS there's no kernel code that cares whether nodes are *named* "pciex" or "pcie". So shutup these warnings by converting to the name dtc wants. As always there's some risk this could break something obscure that does rely on the name, in which case we can revert. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200623130320.405852-1-mpe@ellerman.id.au
show more ...
|
Revision tags: v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16, v4.15 |
|
#
600ecc19 |
| 14-Dec-2017 |
Mathieu Malaterre <malat@debian.org> |
powerpc/boot/dts: Remove leading 0x and 0s from bindings notation Improve the DTS files by removing all the leading "0x" and zeros to fix the following dtc warnings: Warning (
powerpc/boot/dts: Remove leading 0x and 0s from bindings notation Improve the DTS files by removing all the leading "0x" and zeros to fix the following dtc warnings: Warning (unit_address_format): Node /XXX unit name should not have leading "0x" and: Warning (unit_address_format): Node /XXX unit name should not have leading 0s Converted using the following command: find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -E -i -e "s/@0x([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" -e "s/@0+([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" {} + For simplicity, two sed expressions were used to solve each warnings separately. To make the regex expression more robust a few other issues were resolved, namely setting unit-address to lower case, and adding a whitespace before the the opening curly brace: https://elinux.org/Device_Tree_Linux#Linux_conventions This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation") Reported-by: David Daney <ddaney@caviumnetworks.com> Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
show more ...
|
Revision tags: v4.13.16, v4.14, v4.13.5, v4.13, v4.12, v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10, v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28, v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4, v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1, v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1, openbmc-20160713-1, v4.4.15, v4.6.4, v4.6.3, v4.4.14, v4.6.2, v4.4.13, openbmc-20160606-1, v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8, v4.4.7, openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6, v4.5, v4.4.5, v4.4.4, v4.4.3, openbmc-20160222-1, v4.4.2, openbmc-20160212-1, openbmc-20160210-1, openbmc-20160202-2, openbmc-20160202-1, v4.4.1, openbmc-20160127-1, openbmc-20160120-1, v4.4, openbmc-20151217-1, openbmc-20151210-1, openbmc-20151202-1, openbmc-20151123-1, openbmc-20151118-1, openbmc-20151104-1, v4.3, openbmc-20151102-1, openbmc-20151028-1, v4.3-rc1, v4.2, v4.2-rc8, v4.2-rc7, v4.2-rc6, v4.2-rc5, v4.2-rc4, v4.2-rc3, v4.2-rc2, v4.2-rc1, v4.1, v4.1-rc8, v4.1-rc7, v4.1-rc6, v4.1-rc5, v4.1-rc4, v4.1-rc3, v4.1-rc2, v4.1-rc1, v4.0, v4.0-rc7, v4.0-rc6, v4.0-rc5, v4.0-rc4, v4.0-rc3, v4.0-rc2, v4.0-rc1, v3.19, v3.19-rc7, v3.19-rc6, v3.19-rc5, v3.19-rc4, v3.19-rc3, v3.19-rc2, v3.19-rc1, v3.18, v3.18-rc7, v3.18-rc6, v3.18-rc5, v3.18-rc4, v3.18-rc3, v3.18-rc2, v3.18-rc1, v3.17, v3.17-rc7, v3.17-rc6, v3.17-rc5, v3.17-rc4, v3.17-rc3, v3.17-rc2, v3.17-rc1, v3.16, v3.16-rc7, v3.16-rc6, v3.16-rc5, v3.16-rc4, v3.16-rc3, v3.16-rc2, v3.16-rc1, v3.15, v3.15-rc8, v3.15-rc7, v3.15-rc6, v3.15-rc5, v3.15-rc4, v3.15-rc3, v3.15-rc2, v3.15-rc1, v3.14, v3.14-rc8, v3.14-rc7, v3.14-rc6, v3.14-rc5, v3.14-rc4, v3.14-rc3, v3.14-rc2, v3.14-rc1, v3.13, v3.13-rc8, v3.13-rc7, v3.13-rc6, v3.13-rc5, v3.13-rc4, v3.13-rc3, v3.13-rc2, v3.13-rc1, v3.12, v3.12-rc7, v3.12-rc6, v3.12-rc5, v3.12-rc4, v3.12-rc3, v3.12-rc2, v3.12-rc1, v3.11, v3.11-rc7, v3.11-rc6, v3.11-rc5, v3.11-rc4, v3.11-rc3, v3.11-rc2, v3.11-rc1, v3.10, v3.10-rc7, v3.10-rc6, v3.10-rc5, v3.10-rc4, v3.10-rc3, v3.10-rc2, v3.10-rc1, v3.9, v3.9-rc8, v3.9-rc7, v3.9-rc6, v3.9-rc5, v3.9-rc4, v3.9-rc3, v3.9-rc2, v3.9-rc1, v3.8, v3.8-rc7, v3.8-rc6, v3.8-rc5, v3.8-rc4, v3.8-rc3, v3.8-rc2, v3.8-rc1, v3.7, v3.7-rc8, v3.7-rc7, v3.7-rc6, v3.7-rc5, v3.7-rc4, v3.7-rc3, v3.7-rc2, v3.7-rc1, v3.6, v3.6-rc7, v3.6-rc6, v3.6-rc5, v3.6-rc4, v3.6-rc3, v3.6-rc2, v3.6-rc1, v3.5, v3.5-rc7, v3.5-rc6, v3.5-rc5, v3.5-rc4, v3.5-rc3, v3.5-rc2, v3.5-rc1, v3.4, v3.4-rc7, v3.4-rc6, v3.4-rc5, v3.4-rc4, v3.4-rc3, v3.4-rc2, v3.4-rc1, v3.3, v3.3-rc7, v3.3-rc6, v3.3-rc5, v3.3-rc4, v3.3-rc3, v3.3-rc2, v3.3-rc1, v3.2, v3.2-rc7, v3.2-rc6, v3.2-rc5, v3.2-rc4, v3.2-rc3, v3.2-rc2, v3.2-rc1, v3.1, v3.1-rc10, v3.1-rc9, v3.1-rc8, v3.1-rc7, v3.1-rc6, v3.1-rc5, v3.1-rc4, v3.1-rc3, v3.1-rc2, v3.1-rc1, v3.0, v3.0-rc7, v3.0-rc6, v3.0-rc5, v3.0-rc4, v3.0-rc3, v3.0-rc2, v3.0-rc1, v2.6.39, v2.6.39-rc7, v2.6.39-rc6, v2.6.39-rc5, v2.6.39-rc4, v2.6.39-rc3, v2.6.39-rc2, v2.6.39-rc1, v2.6.38, v2.6.38-rc8, v2.6.38-rc7, v2.6.38-rc6, v2.6.38-rc5, v2.6.38-rc4, v2.6.38-rc3, v2.6.38-rc2, v2.6.38-rc1, v2.6.37, v2.6.37-rc8, v2.6.37-rc7, v2.6.37-rc6, v2.6.37-rc5, v2.6.37-rc4, v2.6.37-rc3, v2.6.37-rc2, v2.6.37-rc1, v2.6.36, v2.6.36-rc8, v2.6.36-rc7, v2.6.36-rc6, v2.6.36-rc5, v2.6.36-rc4, v2.6.36-rc3, v2.6.36-rc2, v2.6.36-rc1, v2.6.35, v2.6.35-rc6, v2.6.35-rc5, v2.6.35-rc4, v2.6.35-rc3, v2.6.35-rc2, v2.6.35-rc1, v2.6.34, v2.6.34-rc7, v2.6.34-rc6, v2.6.34-rc5, v2.6.34-rc4, v2.6.34-rc3, v2.6.34-rc2, v2.6.34-rc1, v2.6.33, v2.6.33-rc8, v2.6.33-rc7, v2.6.33-rc6, v2.6.33-rc5, v2.6.33-rc4, v2.6.33-rc3, v2.6.33-rc2, v2.6.33-rc1, v2.6.32, v2.6.32-rc8, v2.6.32-rc7, v2.6.32-rc6, v2.6.32-rc5, v2.6.32-rc4 |
|
#
835ad8e7 |
| 08-Oct-2009 |
Dave Mitchell <dmitchell@appliedmicro.com> |
powerpc/4xx: Add 16K FIFO size DTS entries on supported platforms Adding tx/rx-fifo-size-gige to EMAC fields for evaluation kit DTS files where appropriate. Signed-off-by: Dave
powerpc/4xx: Add 16K FIFO size DTS entries on supported platforms Adding tx/rx-fifo-size-gige to EMAC fields for evaluation kit DTS files where appropriate. Signed-off-by: Dave Mitchell <dmitchell@appliedmicro.com> Acked-by: Prodyut Hazarika <phazarika@appliedmicro.com> Acked-by: Victor Gallardo <vgallardo@appliedmicro.com> Acked-by: Loc Ho <lho@appliedmicro.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
show more ...
|
Revision tags: v2.6.32-rc3, v2.6.32-rc1, v2.6.32-rc2, v2.6.31, v2.6.31-rc9, v2.6.31-rc8, v2.6.31-rc7, v2.6.31-rc6, v2.6.31-rc5, v2.6.31-rc4, v2.6.31-rc3, v2.6.31-rc2, v2.6.31-rc1, v2.6.30, v2.6.30-rc8, v2.6.30-rc7, v2.6.30-rc6, v2.6.30-rc5, v2.6.30-rc4, v2.6.30-rc3, v2.6.30-rc2, v2.6.30-rc1, v2.6.29, v2.6.29-rc8, v2.6.29-rc7, v2.6.29-rc6, v2.6.29-rc5, v2.6.29-rc4, v2.6.29-rc3, v2.6.29-rc2, v2.6.29-rc1, v2.6.28, v2.6.28-rc9 |
|
#
94ce1c58 |
| 18-Dec-2008 |
Grant Erickson <gerickson@nuovations.com> |
powerpc/4xx: DTS: Add Add'l SDRAM0 Compatible and Interrupt Info Added additional information for type and compatibility strings and interrupt information to the SDRAM0 memory-controller
powerpc/4xx: DTS: Add Add'l SDRAM0 Compatible and Interrupt Info Added additional information for type and compatibility strings and interrupt information to the SDRAM0 memory-controller device tree nodes for AMCC PowerPC 405EX[r]-based boards to facilitate binding with the new "ibm,sdram-4xx-ddr2" EDAC memory controller adapter driver. Signed-off-by: Grant Erickson <gerickson@nuovations.com> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
show more ...
|
Revision tags: v2.6.28-rc8, v2.6.28-rc7, v2.6.28-rc6, v2.6.28-rc5, v2.6.28-rc4, v2.6.28-rc3, v2.6.28-rc2, v2.6.28-rc1, v2.6.27, v2.6.27-rc9, v2.6.27-rc8, v2.6.27-rc7, v2.6.27-rc6, v2.6.27-rc5, v2.6.27-rc4, v2.6.27-rc3, v2.6.27-rc2, v2.6.27-rc1, v2.6.26 |
|
#
05781ccd |
| 07-Jul-2008 |
Grant Erickson <gerickson@nuovations.com> |
ibm_newemac: Parameterize EMAC Multicast Match Handling Various instances of the EMAC core have varying: 1) number of address match slots, 2) width of the registers for handling address
ibm_newemac: Parameterize EMAC Multicast Match Handling Various instances of the EMAC core have varying: 1) number of address match slots, 2) width of the registers for handling address match slots, 3) number of registers for handling address match slots and 4) base offset for those registers. As the driver stands today, it assumes that all EMACs have 4 IAHT and GAHT 32-bit registers, starting at offset 0x30 from the register base, with only 16-bits of each used for a total of 64 match slots. The 405EX(r) and 460EX now use the EMAC4SYNC core rather than the EMAC4 core. This core has 8 IAHT and GAHT registers, starting at offset 0x80 from the register base, with ALL 32-bits of each used for a total of 256 match slots. This adds a new compatible device tree entry "emac4sync" and a new, related feature flag "EMAC_FTR_EMAC4SYNC" along with a series of macros and inlines which supply the appropriate parameterized value based on the presence or absence of the EMAC4SYNC feature. The code has further been reworked where appropriate to use those macros and inlines. In addition, the register size passed to ioremap is now taken from the device tree: c4 for EMAC4SYNC cores 74 for EMAC4 cores 70 for EMAC cores rather than sizeof (emac_regs). Finally, the device trees have been updated with the appropriate compatible entries and resource sizes. This has been tested on an AMCC Haleakala board such that: 1) inbound ICMP requests to 'haleakala.local' via MDNS from both Mac OS X 10.4.11 and Ubuntu 8.04 systems as well as 2) outbound ICMP requests from 'haleakala.local' to those same systems in the '.local' domain via MDNS now work. Signed-off-by: Grant Erickson <gerickson@nuovations.com> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
show more ...
|
Revision tags: v2.6.26-rc9, v2.6.26-rc8, v2.6.26-rc7, v2.6.26-rc6, v2.6.26-rc5, v2.6.26-rc4, v2.6.26-rc3 |
|
#
71f34979 |
| 15-May-2008 |
David Gibson <david@gibson.dropbear.id.au> |
[POWERPC] Convert remaining dts-v0 files to v1 At the moment we have a mixture of left-over version 0 and new-format version 1 files in arch/powerpc/boot/dts. This is potentially co
[POWERPC] Convert remaining dts-v0 files to v1 At the moment we have a mixture of left-over version 0 and new-format version 1 files in arch/powerpc/boot/dts. This is potentially confusing to people new to the dts format attempting to figure it out. So, this patch converts all the as-yet unconverted dts v0 files and converts them to v1. They're mechanically-converted, and not hand tweaked so in some cases they're not 100% in keeping with usual v1 style, but the convertor program does have some heuristics so the discrepancies aren't too bad. I have checked that this patch produces no changes to the resulting dtb binaries. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
show more ...
|
Revision tags: v2.6.26-rc2, v2.6.26-rc1, v2.6.25, v2.6.25-rc9 |
|
#
9d7030be |
| 03-Apr-2008 |
Stefan Roese <sr@denx.de> |
[POWERPC] 4xx: Change dts files to support jumbo frames This patch changes the "max-frame-size" property to 9000 for all gbit enabled 4xx boards. All those ports generally support jumbo
[POWERPC] 4xx: Change dts files to support jumbo frames This patch changes the "max-frame-size" property to 9000 for all gbit enabled 4xx boards. All those ports generally support jumbo frames, so let's give the user a chance to enable it. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
show more ...
|
Revision tags: v2.6.25-rc8, v2.6.25-rc7 |
|
#
145692a7 |
| 20-Mar-2008 |
Stefan Roese <sr@denx.de> |
[POWERPC] 4xx: Add "amcc, haleakala" to the toplevel compatible property Currently Haleakala uses the Kilauea platform code. This patch adds "haleakala" to the compatible property, in ca
[POWERPC] 4xx: Add "amcc, haleakala" to the toplevel compatible property Currently Haleakala uses the Kilauea platform code. This patch adds "haleakala" to the compatible property, in case later kernel versions will introduce a Haleakala platform code. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
show more ...
|
Revision tags: v2.6.25-rc6, v2.6.25-rc5, v2.6.25-rc4, v2.6.25-rc3 |
|
#
e33eb074 |
| 20-Feb-2008 |
Stefan Roese <sr@denx.de> |
[POWERPC] 4xx: Fix Haleakala PCIe compatibility problem in dts Since the 4xx PCIe driver checks for 405ex compatibility, the PCIe interface was not detected as it is currently defined as
[POWERPC] 4xx: Fix Haleakala PCIe compatibility problem in dts Since the 4xx PCIe driver checks for 405ex compatibility, the PCIe interface was not detected as it is currently defined as "405exr" compatible. This patch changes it to "405ex". The 405EX and 405EXr are identical exept that the 2nd PCIe and the 2nd EMAC interfaces are missing. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
show more ...
|
Revision tags: v2.6.25-rc2, v2.6.25-rc1, v2.6.24 |
|
#
a4095516 |
| 16-Jan-2008 |
Stefan Roese <sr@denx.de> |
[POWERPC] 4xx: Add AMCC Haleakala (405EXr) dts The patch adds the Haleakala dts. The Haleakala is a stripped down version of the Kilauea (405EX) with only one EMAC and only one PCIe
[POWERPC] 4xx: Add AMCC Haleakala (405EXr) dts The patch adds the Haleakala dts. The Haleakala is a stripped down version of the Kilauea (405EX) with only one EMAC and only one PCIe interface. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
show more ...
|