arm64: dts: ti: k3-j784s4: Add phase tags marking

bootph-all as phase tag was added to dt-schema
(dtschema/schemas/bootph.yaml) to cover U-Boot challenges with DT.
That's why add it also to Linux to

arm64: dts: ti: k3-j784s4: Add phase tags marking

bootph-all as phase tag was added to dt-schema
(dtschema/schemas/bootph.yaml) to cover U-Boot challenges with DT.
That's why add it also to Linux to be aligned with bootloader requirement.

On TI K3 J784S4 SoC, only secure_proxy_mcu and secure_proxy_sa3 nodes are
exclusively used by R5 bootloader, rest of the dts nodes with bootph-* are
used by later boot stages also.

And secure_proxy_mcu and secure_proxy_sa3 are disabled in kernel device
tree, and will be only enabled in R5 bootloader device tree.
So, bootph-pre-ram for secure_proxy_mcu and secure_proxy_sa3 will be
added in R5 bootloader device tree only.

Add bootph-all for all other nodes that are used in the bootloader on
K3 J784S4 SoC, and bootph-pre-ram is not needed specifically for any node
in kernel dts.

Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20230811192030.3480616-2-a-nandan@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>

show more ...

arm64: dts: ti: k3: j721s2/j784s4: Switch to https links

Looks like a couple of http:// links crept in. Use https instead.

While at it, drop unicode encoded character.

Signed-off-by: Nishanth Meno

arm64: dts: ti: k3: j721s2/j784s4: Switch to https links

Looks like a couple of http:// links crept in. Use https instead.

While at it, drop unicode encoded character.

Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230417225450.1182047-1-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

show more ...

arm64: dts: ti: j784s4: Add VTM node

VTM stands for Voltage Thermal Management. Add the thermal zones.
Seven sensors mapping to seven thermal zones. Main0, Main1, Main2, Main3,
Main4, WKUP1 & WKUP2

arm64: dts: ti: j784s4: Add VTM node

VTM stands for Voltage Thermal Management. Add the thermal zones.
Seven sensors mapping to seven thermal zones. Main0, Main1, Main2, Main3,
Main4, WKUP1 & WKUP2 domains respectively.

Signed-off-by: Keerthy <j-keerthy@ti.com>
[bb@ti.com: rebased on v6.3-rc1]
Signed-off-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20230405215328.3755561-5-bb@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

show more ...

arm64: dts: ti: Use local header for pinctrl register values

The DTS uses hardware register values directly in pin controller pin
configuration and not an abstraction of any form.

These definitions

arm64: dts: ti: Use local header for pinctrl register values

The DTS uses hardware register values directly in pin controller pin
configuration and not an abstraction of any form.

These definitions were previously put in the bindings header to avoid
code duplication and to provide some context meaning (name), but they
do not fit the purpose of bindings.

Store the constants in a header next to DTS and use them instead of
bindings.

Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/all/c4d53e9c-dac0-8ccc-dc86-faada324beba@linaro.org/
Link: https://lore.kernel.org/r/20230315155228.1566883-3-nm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>

show more ...

arm64: dts: ti: Add initial support for J784S4 SoC

The J784S4 SoC belongs to the K3 Multicore SoC architecture
platform, providing advanced system integration in automotive,
ADAS and industrial appl

arm64: dts: ti: Add initial support for J784S4 SoC

The J784S4 SoC belongs to the K3 Multicore SoC architecture
platform, providing advanced system integration in automotive,
ADAS and industrial applications requiring AI at the network edge.
This SoC extends the K3 Jacinto 7 family of SoCs with focus on
raising performance and integration while providing interfaces,
memory architecture and compute performance for multi-sensor, high
concurrency applications.

Some highlights of this SoC are:
* Up to 8 Cortex-A72s, four clusters of lockstep capable dual Cortex-R5F
MCUs, 4 C7x floating point vector DSPs with Matrix Multiply Accelerator
(MMA) for deep learning and CNN.
* 3D GPU: Automotive grade IMG BXS-4-64
* Vision Processing Accelerator (VPAC) with image signal processor and
Depth and Motion Processing Accelerator (DMPAC)
* Three CSI2.0 4L RX plus two CSI2.0 4L TX, two DSI Tx, one eDP/DP and one
DPI interface.
* Integrated gigabit ethernet switch, up to 8 ports (TDA4VH), two ports
support 10Gb USXGMII; Two 4 lane PCIe-GEN3 controllers, USB3.0 Dual-role
device subsystems, Up to 20 MCANs, among other peripherals.

See J784S4 Technical Reference Manual (SPRUJ52 - JUNE 2022)
for further details: http://www.ti.com/lit/zip/spruj52

Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Reviewed-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230112142725.77785-4-a-nandan@ti.com

show more ...