arm64: dts: ti: k3-am654: Update the power domain cells

Update the power-domain cells to 2 and mark all devices as
exclusive. Main uart 0 is the debug console for based boards
and it

arm64: dts: ti: k3-am654: Update the power domain cells

Update the power-domain cells to 2 and mark all devices as
exclusive. Main uart 0 is the debug console for based boards
and it is used by different software entities like u-boot, atf,
linux. So just mark main_uart0 as shared device for base board.

Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>

show more ...

arm64: dts: ti: am654-base-board: Disable SERDES and PCIe

AM654 base board does not have any PCIe slots. Disable all the
SERDES and PCIe instances.

Signed-off-by: Kishon Vijay A

arm64: dts: ti: am654-base-board: Disable SERDES and PCIe

AM654 base board does not have any PCIe slots. Disable all the
SERDES and PCIe instances.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>

show more ...

arm64: dts: ti: am654-base-board: Add gpio_keys node

There are 2 push buttons: SW5 and SW6 that are basically connected to
WKUP_GPIO0_24 and WKUP_GPIO0_27 respectively. Add the respectiv

arm64: dts: ti: am654-base-board: Add gpio_keys node

There are 2 push buttons: SW5 and SW6 that are basically connected to
WKUP_GPIO0_24 and WKUP_GPIO0_27 respectively. Add the respective
nodes and the pinctrl data to set the mode to GPIO and Input.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>

show more ...

arm64: dts: ti: k3-am65-mcu: Add ADC nodes

TI AM654 SoC has two ADC instances in the MCU domain. Add DT nodes for
the same.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed

arm64: dts: ti: k3-am65-mcu: Add ADC nodes

TI AM654 SoC has two ADC instances in the MCU domain. Add DT nodes for
the same.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>

show more ...

arm64: dts: ti: k3-am654-base-board: enable USB1

Add pinmux for USB1 and enable it as a dual role port.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tero Kristo <

arm64: dts: ti: k3-am654-base-board: enable USB1

Add pinmux for USB1 and enable it as a dual role port.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>

show more ...

arm64: dts: ti: k3-am654-base-board: Add eMMC Support

On the am654x-evm, sdhci0 node is connected to an eMMC. Add node and
pinmux for the same.

Signed-off-by: Faiz Abbas <faiz_a

arm64: dts: ti: k3-am654-base-board: Add eMMC Support

On the am654x-evm, sdhci0 node is connected to an eMMC. Add node and
pinmux for the same.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>

show more ...

arm64: dts: ti: k3-am654: Enable main domain McSPI0

Enable McSPI0 of main domain and add DT node for the SPI NOR flash
connected to CS0.

Signed-off-by: Vignesh R <vigneshr@ti.co

arm64: dts: ti: k3-am654: Enable main domain McSPI0

Enable McSPI0 of main domain and add DT node for the SPI NOR flash
connected to CS0.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>

show more ...

arm64: dts: ti: k3-am654-base-board: Enable ECAP PWM

Enable ECAP PWM which is used for LCD backlight.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Tero Kristo <t-kr

arm64: dts: ti: k3-am654-base-board: Enable ECAP PWM

Enable ECAP PWM which is used for LCD backlight.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>

show more ...

arm64: dts: ti: k3-am654-base-board: Add I2C nodes

Add DT entries for I2C instances present in AM654 SoC.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Acked-by: Nishanth Menon <nm

arm64: dts: ti: k3-am654-base-board: Add I2C nodes

Add DT entries for I2C instances present in AM654 SoC.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>

show more ...

arm64: dts: ti: am654-base-board: Add pinmux for main uart0

Add pinmux for main uart0 that is serves as console on AM654 EVM

Signed-off-by: Vignesh R <vigneshr@ti.com>
Acked-by:

arm64: dts: ti: am654-base-board: Add pinmux for main uart0

Add pinmux for main uart0 that is serves as console on AM654 EVM

Signed-off-by: Vignesh R <vigneshr@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>

show more ...

arm64: dts: ti: am654: Add uart nodes

Add uart nodes for AM654 device tree components.

Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
S

arm64: dts: ti: am654: Add uart nodes

Add uart nodes for AM654 device tree components.

Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>

show more ...

arm64: dts: ti: Add support for AM654 EVM base board

The EValuation Module(EVM) platform for AM654 consists of a
common Base board + one or more of daughter cards, which include:
a)

arm64: dts: ti: Add support for AM654 EVM base board

The EValuation Module(EVM) platform for AM654 consists of a
common Base board + one or more of daughter cards, which include:
a) "Personality Modules", which can be specific to a profile, such as
ICSSG enabled or Multi-media (including audio).
b) SERDES modules, which may be 2 lane PCIe or two port PCIe + USB2
c) Camera daughter card
d) various display panels

Among other options. There are two basic configurations defined which
include an "EVM" configuration and "IDK" (Industrial development kit)
which differ in the specific combination of daughter cards that are
used.

To simplify support, we choose to support just the base board as the
core device tree file and all daughter cards would be expected to be
device tree overlays.

Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

show more ...