arm64: dts: ti: Fix HDMI Audio overlay in Makefile

[ Upstream commit 69c570ebc3964534c19dc4438d3b96f55d489fc3 ]

Apply HDMI audio overlay to AM625 and AM62-LP SK-EVMs DT binaries,
instead of leaving

arm64: dts: ti: Fix HDMI Audio overlay in Makefile

[ Upstream commit 69c570ebc3964534c19dc4438d3b96f55d489fc3 ]

Apply HDMI audio overlay to AM625 and AM62-LP SK-EVMs DT binaries,
instead of leaving it in a floating state.

Fixes: b50ccab9e07c ("arm64: dts: ti: am62x-sk: Add overlay for HDMI audio")
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20231003092259.28103-1-a-bhatia1@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

arm64: dts: ti: k3-j721s2-evm-gesi: Specify base dtb for overlay file

[ Upstream commit 35be6ac964450687ab39b846d65ee1cb2a352280 ]

Specify the base dtb file k3-j721s2-common-proc-board.dtb on which

arm64: dts: ti: k3-j721s2-evm-gesi: Specify base dtb for overlay file

[ Upstream commit 35be6ac964450687ab39b846d65ee1cb2a352280 ]

Specify the base dtb file k3-j721s2-common-proc-board.dtb on which the
k3-j721s2-evm-gesi-exp-board.dtbo overlay has to be applied. Name the
resulting dtb as k3-j721s2-evm.dtb.

Fixes: cac04e27f093 ("arm64: dts: ti: k3-j721s2: Add overlay to enable main CPSW2G with GESI")
Reported-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20230912043308.20629-1-s-vadapalli@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

arm64: dts: ti: Add support for the AM62P5 Starter Kit

Add basic support for the AM62P5 SK with UART console and
ramdisk as rootfs.

Schematics is at https://www.ti.com/lit/zip/sprr487

Signed-off-b

arm64: dts: ti: Add support for the AM62P5 Starter Kit

Add basic support for the AM62P5 SK with UART console and
ramdisk as rootfs.

Schematics is at https://www.ti.com/lit/zip/sprr487

Signed-off-by: Bryan Brattlof <bb@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230811184432.732215-4-vigneshr@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>

show more ...

arm64: dts: ti: am62x-sk: Add overlay for HDMI audio

Enable audio output over HDMI instead of the 3.5mm jack.

A FET switch (U65) on the EVM muxes serial audio lines coming from McASP
between the co

arm64: dts: ti: am62x-sk: Add overlay for HDMI audio

Enable audio output over HDMI instead of the 3.5mm jack.

A FET switch (U65) on the EVM muxes serial audio lines coming from McASP
between the codec (tlv320aic3106) and the HDMI bridge (sii9022).

By default it uses the codec, but it can be toggled to use the HDMI
bridge by shorting a (J24) header on the board.

Signed-off-by: Jai Luthra <j-luthra@ti.com>
[a-bhatia1: Cosmetic changes]
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20230809084559.17322-5-a-bhatia1@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>

show more ...

arm64: dts: ti: k3-am64-tqma64xxl-mbax4xxl: add SD-card and WLAN overlays

As the SD-card and WLAN are connected to the same SDHC interface (with a
GPIO-controlled mux), they are mutually exclusive.

arm64: dts: ti: k3-am64-tqma64xxl-mbax4xxl: add SD-card and WLAN overlays

As the SD-card and WLAN are connected to the same SDHC interface (with a
GPIO-controlled mux), they are mutually exclusive. Provide Device Tree
overlays for both configurations.

Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Link: https://lore.kernel.org/r/8ff8a6f1fdbe6ebb478f88bb0737628054c43c5b.1690463382.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Nishanth Menon <nm@ti.com>

show more ...

arm64: dts: ti: Add TQ-Systems TQMa64XxL SoM and MBaX4XxL carrier board Device Trees

The TQMa64XxL is an LGA SoM based on the TI AM64x SoC family. Add DTS(I)
for the AM642 (2x Cortex-A53) variant an

arm64: dts: ti: Add TQ-Systems TQMa64XxL SoM and MBaX4XxL carrier board Device Trees

The TQMa64XxL is an LGA SoM based on the TI AM64x SoC family. Add DTS(I)
for the AM642 (2x Cortex-A53) variant and its combination with our
MBaX4XxL carrier board.

Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Link: https://lore.kernel.org/r/2a635428c73b5ab0fe793e558db6b5d88edccf8c.1690463382.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Nishanth Menon <nm@ti.com>

show more ...

arm64: dts: ti: k3-j721s2: Add overlay to enable main CPSW2G with GESI

The MAIN CPSW2G instance of CPSW on J721S2 SoC can be enabled with the GESI
Expansion Board connected to the J7 Common-Proc-Boa

arm64: dts: ti: k3-j721s2: Add overlay to enable main CPSW2G with GESI

The MAIN CPSW2G instance of CPSW on J721S2 SoC can be enabled with the GESI
Expansion Board connected to the J7 Common-Proc-Board. Use the overlay
to enable this.

Add alias for the MAIN CPSW2G port to enable kernel to fetch MAC address
directly from U-Boot.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Link: https://lore.kernel.org/r/20230726065407.378455-3-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>

show more ...

arm64: dts: ti: k3-j721e: Add overlay to enable CPSW9G ports with GESI

The J7 GESI EXP board for J721E Common-Proc-Board supports RGMII mode.
Use the overlay to configure CPSW9G ports in RGMII-RXID

arm64: dts: ti: k3-j721e: Add overlay to enable CPSW9G ports with GESI

The J7 GESI EXP board for J721E Common-Proc-Board supports RGMII mode.
Use the overlay to configure CPSW9G ports in RGMII-RXID mode.

Add aliases for CPSW9G ports to enable kernel to fetch MAC addresses
directly from U-Boot.

Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Link: https://lore.kernel.org/r/20230725073057.96705-1-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>

show more ...

arm64: dts: ti: add verdin am62 yavia

Add Toradex Verdin AM62 Yavia.

Link: https://www.toradex.com/products/carrier-board/yavia
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link

arm64: dts: ti: add verdin am62 yavia

Add Toradex Verdin AM62 Yavia.

Link: https://www.toradex.com/products/carrier-board/yavia
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20230615095058.33890-6-francesco@dolcini.it
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

show more ...

arm64: dts: ti: add verdin am62 dahlia

Add Toradex Verdin AM62 Dahlia.

Link: https://www.toradex.com/products/carrier-board/dahlia-carrier-board-kit
Signed-off-by: Francesco Dolcini <francesco.dolc

arm64: dts: ti: add verdin am62 dahlia

Add Toradex Verdin AM62 Dahlia.

Link: https://www.toradex.com/products/carrier-board/dahlia-carrier-board-kit
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20230615095058.33890-5-francesco@dolcini.it
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

show more ...

arm64: dts: ti: add verdin am62

This patch adds the device tree to support Toradex Verdin AM62 a
computer on module which can be used on different carrier boards
and the Toradex Verdin Development B

arm64: dts: ti: add verdin am62

This patch adds the device tree to support Toradex Verdin AM62 a
computer on module which can be used on different carrier boards
and the Toradex Verdin Development Board carrier board.

The module consists of an TI AM62 family SoC (either AM623 or AM625), a
TPS65219 PMIC, a Gigabit Ethernet PHY, 512MB to 2GB of LPDDR4 RAM, an
eMMC, a TLA2024 ADC, an I2C EEPROM, an RX8130 RTC, and optional Parallel
RGB to MIPI DSI bridge plus an optional Bluetooth/Wi-Fi module.

Anything that is not self-contained on the module is disabled by
default.

So far there is no display nor USB role switch supported, apart of that
all the other functionalities are fine.

Link: https://developer.toradex.com/hardware/verdin-som-family/modules/verdin-am62/
Link: https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
Link: https://www.toradex.com/products/carrier-board/verdin-development-board-kit
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20230615095058.33890-4-francesco@dolcini.it
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

show more ...

arm64: dts: ti: Add basic support for phyBOARD-Lyra-AM625

The phyCORE-AM62x [1] is a SoM (System on Module) featuring TI's AM62x SoC.
It can be used in combination with different carrier boards.
Thi

arm64: dts: ti: Add basic support for phyBOARD-Lyra-AM625

The phyCORE-AM62x [1] is a SoM (System on Module) featuring TI's AM62x SoC.
It can be used in combination with different carrier boards.
This module can come with different sizes and models for
DDR, eMMC, SPI NOR Flash and various SoCs from the AM62x family.

A development Kit, called phyBOARD-Lyra [2] is used as a carrier board
reference design around the AM62x SoM.

Supported features:
* Debug UART
* SPI NOR Flash
* eMMC
* 2x Ethernet
* Micro SD card
* I2C EEPROM
* I2C RTC
* GPIO Expander
* LEDs
* USB

For more details, see:

[1] Product page SoM: https://www.phytec.com/product/phycore-am62x
[2] Product page CB: https://www.phytec.com/product/phyboard-am62x

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20230504140143.1425951-2-w.egorov@phytec.de
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

show more ...

arm64: dts: ti: am65x: Add Rocktech OLDI panel DT overlay

The OLDI-LCD1EVM add on board has Rocktech RK101II01D-CT panel[1] with
integrated touch screen. The integrated touch screen is Goodix GT928.

arm64: dts: ti: am65x: Add Rocktech OLDI panel DT overlay

The OLDI-LCD1EVM add on board has Rocktech RK101II01D-CT panel[1] with
integrated touch screen. The integrated touch screen is Goodix GT928.
This panel connects with AM65 GP-EVM[2].

Add DT nodes for these and connect the endpoint nodes with DSS.

[1]: Panel link
https://www.digimax.it/en/tft-lcd/20881-RK101II01D-CT

[2]: AM654 LCD EVM:
https://www.ti.com/tool/TMDSLCD1EVM

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
[abhatia1@ti.com: Make cosmetic and 6.4 kernel DTSO syntax changes]
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20230509102354.10116-2-a-bhatia1@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

show more ...

arm64: ti: dts: Add support for AM62x LP SK

The AM62x LP SK board is similar to the AM62x SK board, but has some
not-so-minor changes that requires different device tree.

The differences are mainly

arm64: ti: dts: Add support for AM62x LP SK

The AM62x LP SK board is similar to the AM62x SK board, but has some
not-so-minor changes that requires different device tree.

The differences are mainly:
- AM62x SoC in the AMC package that meets AECQ100 automotive standard.
- LPDDR4 versus DDR4 on the AM62x SK.
- TPS65219 PMIC instead of discrete regulators.
- IO expander pin names are wired differently.
- Second ethernet port is currently disabled as the boards do not have
the part physically installed.
- OSPI NAND vs OSPI NOR.
- No WLAN chip instead a SDIO M.2 connector.

Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
[vigneshr@ti.com: Add PMIC node]
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230321-am62-lp-sk-v2-3-0a56e1694804@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>

show more ...

arm64: dts: ti: Add k3-am625-beagleplay

BeagleBoard.org BeaglePlay is an easy to use, affordable open source
hardware single board computer based on the Texas Instruments AM625
SoC that allows you t

arm64: dts: ti: Add k3-am625-beagleplay

BeagleBoard.org BeaglePlay is an easy to use, affordable open source
hardware single board computer based on the Texas Instruments AM625
SoC that allows you to create connected devices that work even at long
distances using IEEE 802.15.4g LR-WPAN and IEEE 802.3cg 10Base-T1L.
Expansion is provided over open standards based mikroBUS, Grove and
QWIIC headers among other interfaces.

This board family can be identified by the 24c32 eeprom:

[aa 55 33 ee 01 37 00 10 2e 00 42 45 41 47 4c 45 |.U3..7....BEAGLE|]
[50 4c 41 59 2d 41 30 2d 00 00 30 32 30 30 37 38 |PLAY-A0-..020078|]

https://beagleplay.org/
https://git.beagleboard.org/beagleplay/beagleplay

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20230316152143.2438928-3-nm@ti.com
Co-developed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>

show more ...

arm64: dts: ti: k3-j7200: Add overlay to enable CPSW5G ports in QSGMII mode

The J7 Quad Port Add-On Ethernet Card for J7200 Common-Proc-Board supports
QSGMII mode. Use the overlay to configure CPSW5

arm64: dts: ti: k3-j7200: Add overlay to enable CPSW5G ports in QSGMII mode

The J7 Quad Port Add-On Ethernet Card for J7200 Common-Proc-Board supports
QSGMII mode. Use the overlay to configure CPSW5G ports in QSGMII mode.

Add support to reset the PHY from kernel by using gpio-hog and gpio-reset.

Add aliases for CPSW5G ports to enable kernel to fetch MAC addresses
directly from U-Boot.

Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20230315062307.1612220-5-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>

show more ...

arm64: dts: ti: k3-j721e: Add overlay to enable CPSW9G ports in QSGMII mode

The J7 Quad Port Add-On Ethernet Card for J721E Common-Proc-Board supports
QSGMII mode. Use the overlay to configure CPSW9

arm64: dts: ti: k3-j721e: Add overlay to enable CPSW9G ports in QSGMII mode

The J7 Quad Port Add-On Ethernet Card for J721E Common-Proc-Board supports
QSGMII mode. Use the overlay to configure CPSW9G ports in QSGMII mode.

Add support to reset the PHY from kernel by using gpio-hog and gpio-reset.

Add aliases for CPSW9G ports to enable kernel to fetch MAC addresses
directly from U-Boot.

Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20230315062307.1612220-3-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>

show more ...

arm64: dts: ti: Makefile: Rearrange entries alphabetically

Entries are first grouped as per SoC present on the board. Groups are
sorted alphabetically. This makes it easy to know SoC to board mappin

arm64: dts: ti: Makefile: Rearrange entries alphabetically

Entries are first grouped as per SoC present on the board. Groups are
sorted alphabetically. This makes it easy to know SoC to board mapping
and also add new entries in alphabetical order.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230126071159.2337584-1-vigneshr@ti.com

show more ...

arch: arm64: dts: Add support for AM69 Starter Kit

AM69 Starter Kit is a single board designed for TI AM69 SOC that
provides advanced system integration in automotive ADAS applications,
autonomous m

arch: arm64: dts: Add support for AM69 Starter Kit

AM69 Starter Kit is a single board designed for TI AM69 SOC that
provides advanced system integration in automotive ADAS applications,
autonomous mobile robot and edge AI applications. The SOC comprises
of Cortex-A72s in dual clusters, lockstep capable dual Cortex-R5F MCUs,
Vision Processing Accelerators (VPAC) with Image Signal Processor (ISP)
and multiple vision assist accelerators, Depth and Motion Processing
Accelerators (DMPAC), Deep-learning Matrix Multiply Accelerator(MMA)
and C7x floating point vector DSP

AM69 SK supports the following interfaces:
* 32 GB LPDDR4 RAM
* x1 Gigabit Ethernet interface
* x3 USB 3.0 Type-A ports
* x1 USB 3.0 Type-C port
* x1 UHS-1 capable micro-SD card slot
* x4 MCAN instances
* 32 GB eMMC Flash
* 512 Mbit OSPI flash
* x2 Display connectors
* x1 PCIe M.2 M Key
* x1 PCIe M.2 E Key
* x1 4L PCIe Card Slot
* x3 CSI2 Camera interface
* 40-pin Raspberry Pi header

Add initial support for the AM69 SK board.

Design Files: https://www.ti.com/lit/zip/SPRR466
TRM: https://www.ti.com/lit/zip/spruj52

Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230119132958.124435-3-sabiya.d@ti.com

show more ...

arm64: dts: ti: iot2050: Add support for M.2 variant

The M.2 variant comes with 2 slots, one B-keyed and another one E-keyed.
They are configured by the firmware during startup. Also the device tree

arm64: dts: ti: iot2050: Add support for M.2 variant

The M.2 variant comes with 2 slots, one B-keyed and another one E-keyed.
They are configured by the firmware during startup. Also the device tree
will be adjusted according to the detect or manually configured
interface mode by the firmware. The kernel only carries a single
configuration as base device tree. It has to be built with a symbols
node so that the firmware can apply overlays for the connector modes.

Signed-off-by: chao zeng <chao.zeng@siemens.com>
[Jan: refactored to a single DT]
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/878e3a023767b5a6d9d2cff09015678aaba13fce.1674110442.git.jan.kiszka@siemens.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

show more ...

arm64: dts: ti: k3-am68-sk: Add support for AM68 SK base board

The SK architecture comprises of baseboard and a SOM board. The
AM68 Starter Kit's baseboard contains most of the actual connectors,
po

arm64: dts: ti: k3-am68-sk: Add support for AM68 SK base board

The SK architecture comprises of baseboard and a SOM board. The
AM68 Starter Kit's baseboard contains most of the actual connectors,
power supply etc. The System on Module (SoM) is plugged on to the base
board. Therefore, add support for peripherals brought out in the base
board.

Schematics: https://www.ti.com/lit/zip/SPRR463

Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Tested-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230116071446.28867-4-sinthu.raja@ti.com

show more ...

arm64: dts: ti: Add support for phyBOARD-Electra-AM642

Add basic support for phyCORE-AM64x SoM & phyBOARD-Electra-AM642 CB.

The phyCORE-AM64x [1] is a SoM (System on Module) featuring TI's AM64x So

arm64: dts: ti: Add support for phyBOARD-Electra-AM642

Add basic support for phyCORE-AM64x SoM & phyBOARD-Electra-AM642 CB.

The phyCORE-AM64x [1] is a SoM (System on Module) featuring TI's AM64x SoC.
It can be used in combination with different carrier boards.
This module can come with different sizes and models for
DDR, eMMC, SPI NOR Flash and various SoCs from the AM64x family.

A development Kit, called phyBOARD-Electra [2] is used as a carrier board
reference design around the AM64x SoM.

Supported features:
* Debug UART
* Heartbeat LED
* GPIO buttons & LEDs
* SPI NOR flash
* eMMC
* CAN
* Ethernet
* Micro SD card
* I2C EEPROM
* I2C RTC
* I2C LED Dimmer
* USB

For more details, see:

[1] Product page SoM: https://www.phytec.com/product/phycore-am64x
[2] Product page CB: https://www.phytec.com/product/phyboard-am64x

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230104162927.1215033-2-w.egorov@phytec.de

show more ...

arm64: dts: ti: Add support for J784S4 EVM board

J784S4 EVM board is designed for TI J784S4 SoC. It supports the following
interfaces:
* 32 GB DDR4 RAM
* x2 Gigabit Ethernet interfaces capable of wo

arm64: dts: ti: Add support for J784S4 EVM board

J784S4 EVM board is designed for TI J784S4 SoC. It supports the following
interfaces:
* 32 GB DDR4 RAM
* x2 Gigabit Ethernet interfaces capable of working in Switch and MAC mode
* x1 Input Audio Jack, x1 Output Audio Jack
* x1 USB2.0 Hub with two Type A host and x1 USB 3.1 Type-C Port
* x2 4L PCIe connector
* x1 UHS-1 capable micro-SD card slot
* 512 Mbit OSPI flash, 1 Gbit Octal NAND flash, 512 Mbit QSPI flash,
UFS flash.
* x6 UART through UART-USB bridge
* XDS110 for onboard JTAG debug using USB
* Temperature sensors, user push buttons and LEDs
* 40-pin User Expansion Connector
* x2 ENET Expansion Connector, x1 GESI expander, x2 Display connector
* x1 15-pin CSI header
* x6 MCAN instances

Add basic support for J784S4-EVM.

Schematics: https://www.ti.com/lit/zip/sprr458

Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Tested-by: Manorit Chawdhry <m-chawdhry@ti.com>
Reviewed-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230112142725.77785-5-a-nandan@ti.com

show more ...

arm64: dts: ti: Add k3-j721e-beagleboneai64

BeagleBoard.org BeagleBone AI-64 is an open source hardware single
board computer based on the Texas Instruments TDA4VM SoC featuring
dual-core 2.0GHz Arm

arm64: dts: ti: Add k3-j721e-beagleboneai64

BeagleBoard.org BeagleBone AI-64 is an open source hardware single
board computer based on the Texas Instruments TDA4VM SoC featuring
dual-core 2.0GHz Arm Cortex-A72 processor, C7x+MMA and 2 C66x
floating-point VLIW DSPs, 3x dual Arm Cortex-R5 co-processors,
2x 6-core Programmable Real-Time Unit and Industrial Communication
SubSystem, PowerVR Rogue 8XE GE8430 3D GPU. The board features 4GB
DDR4, USB3.0 Type-C, 2x USB SS Type-A, miniDisplayPort, 2x 4-lane
CSI, DSI, 16GB eMMC flash, 1G Ethernet, M.2 E-key for WiFi/BT, and
BeagleBone expansion headers.

This board family can be indentified by the BBONEAI-64-B0 in the
at24 eeprom:

[aa 55 33 ee 01 37 00 10 2e 00 42 42 4f 4e 45 41 |.U3..7....BBONEA|]
[49 2d 36 34 2d 42 30 2d 00 00 42 30 30 30 37 38 |I-64-B0-..B00078|]

https://beagleboard.org/ai-64
https://git.beagleboard.org/beagleboard/beaglebone-ai-64

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Reviewed-by: Andrew Davis <afd@ti.com>
CC: Nishanth Menon <nm@ti.com>
CC: Vignesh Raghavendra <vigneshr@ti.com>
CC: Tero Kristo <kristo@kernel.org>
CC: Jason Kridner <jkridner@beagleboard.org>
CC: Drew Fustini <drew@beagleboard.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20221118163139.3592054-2-robertcnelson@gmail.com

show more ...

arm64: dts: ti: Add support for AM62A7-SK

AM62A StarterKit (SK) board is a low cost, small form factor board
designed for TI’s AM62A7 SoC. It supports the following interfaces:
* 2 GB LPDDR4 RAM
* x

arm64: dts: ti: Add support for AM62A7-SK

AM62A StarterKit (SK) board is a low cost, small form factor board
designed for TI’s AM62A7 SoC. It supports the following interfaces:
* 2 GB LPDDR4 RAM
* x1 Gigabit Ethernet interface
* x1 HDMI Port with audio
* x1 Headphone Jack
* x1 USB2.0 Hub with two Type A host and x1 USB Type-C DRP Port
* x1 UHS-1 capable µSD card slot
* M.2 SDIO Wifi + UART slot
* 1Gb OSPI NAND flash
* x4 UART through UART-USB bridge
* XDS110 for onboard JTAG debug using USB
* Temperature sensors, user push buttons and LEDs
* 40-pin User Expansion Connector
* 24-pin header for peripherals in MCU island (I2C, UART, SPI, IO)
* 20-pin header for Programmable Realtime Unit (PRU) IO pins
* 40-pin CSI header

Add basic support for AM62A7-SK.

Schematics: https://www.ti.com/lit/zip/sprr459

Co-developed-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Tested-by: Devarsh Thakkar <devarsht@ti.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220901141328.899100-6-vigneshr@ti.com

show more ...