arm64: dts: rockchip: add support for Firefly ROC-RK3328-PC

ROC-RK3328-PC is the board inside the portable Firefly Station M1
Geek PC. As a redesign after the ROC-RK3328-CC, it uses TypeC as
power i

arm64: dts: rockchip: add support for Firefly ROC-RK3328-PC

ROC-RK3328-PC is the board inside the portable Firefly Station M1
Geek PC. As a redesign after the ROC-RK3328-CC, it uses TypeC as
power input and OTG port, embedded with eMMC 5.1 storage and a
SDIO WiFi/BT chip (RTL8723DS).

- Rockchip RK3328 SoC
- 2/4GB LPDDR3 RAM
- 16/32/64/128GB eMMC 5.1
- TF card slot
- USB 3.0 Port x 1, USB 2.0 Port x 1, TypeC Port x 1 (Power/OTG)
- HDMI
- Gigabit Ethernet
- WiFi: RTL8723DS
- Audio: RK3328
- Key: Power, Reset, Recovery
- LED: POWER, USER
- IR

Signed-off-by: Levin Du <djw@t-chip.com.cn>
Link: https://lore.kernel.org/r/20210709080126.17045-3-djw@t-chip.com.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: add basic dts for RK3568 EVB

This patch add rk3568-evb1-v10.dts for RK3568 evaluation board.
add uart/emmc/i2c/rk809 node for basic function.

Signed-off-by: Liang Chen <cl@roc

arm64: dts: rockchip: add basic dts for RK3568 EVB

This patch add rk3568-evb1-v10.dts for RK3568 evaluation board.
add uart/emmc/i2c/rk809 node for basic function.

Signed-off-by: Liang Chen <cl@rock-chips.com>
Link: https://lore.kernel.org/r/20210622020517.13100-5-cl@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

rockchip: rk3399: Add support for FriendlyARM NanoPi R4S

This adds support for the NanoPi R4S from FriendlyArm.

Rockchip RK3399 SoC
1GB DDR3 or 4GB LPDDR4 RAM
Gigabit Ethernet (WAN)
Gigabit Etherne

rockchip: rk3399: Add support for FriendlyARM NanoPi R4S

This adds support for the NanoPi R4S from FriendlyArm.

Rockchip RK3399 SoC
1GB DDR3 or 4GB LPDDR4 RAM
Gigabit Ethernet (WAN)
Gigabit Ethernet (PCIe) (LAN)
USB 3.0 Port x 2
MicroSD slot
Reset button
WAN - LAN - SYS LED

Co-developed-by: Jensen Huang <jensenhuang@friendlyarm.com>
Signed-off-by: Jensen Huang <jensenhuang@friendlyarm.com>
[minor adjustments]
Co-developed-by: Marty Jones <mj8263788@gmail.com>
Signed-off-by: Marty Jones <mj8263788@gmail.com>
[further adjustments, fixed format issues]
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
Link: https://lore.kernel.org/r/20210319051627.814-2-cnsztl@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: Add NanoPi M4B board

The NanoPi M4B is a minor revision of the original M4.

The differences against the original Nanopi M4 that are common with the
other M4V2 revision include

arm64: dts: rockchip: Add NanoPi M4B board

The NanoPi M4B is a minor revision of the original M4.

The differences against the original Nanopi M4 that are common with the
other M4V2 revision include:

- microphone header removed
- power button added
- recovery button added

Additional changes specific to the M4B:

- USB 3.0 hub removed; board now has 2x USB 3.0 type-A ports and 2x
USB 2.0 ports
- ADB toggle switch added; this changes the top USB 3.0 host port to
a peripheral port
- Type-C port no longer supports data or PD
- WiFi/Bluetooth combo chip switched to AP6256, which supports BT 5.0
but only 1T1R (down from 2T2R) for WiFi

Add a new dts file for the new board revision that shows the difference
against the original.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20210121162321.4538-5-wens@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: rk3328: Add Radxa ROCK Pi E

Radxa ROCK Pi E is a router oriented SBC based on Rockchip's RK3328 SoC.
As the official wiki page puts it, "E for Ethernets".

It features the RK33

arm64: dts: rockchip: rk3328: Add Radxa ROCK Pi E

Radxa ROCK Pi E is a router oriented SBC based on Rockchip's RK3328 SoC.
As the official wiki page puts it, "E for Ethernets".

It features the RK3328 SoC, gigabit and fast Ethernet RJ45 ports, both
directly served by Ethernet controllers in the SoC, a USB 3.0 host port,
a power-only USB type-C port, a 3.5mm headphone jack for audio output,
two LEDs, a 40-pin Raspberry Pi style GPIO header, and optional WiFi+BT
and PoE header.

The board comes in multiple configurations, differing in the amount of
onboard RAM, the level of WiFi+BT (none, 802.11n 2.4GHz, or 802.11ac
2.4 GHz & 5 GHz), and whether PoE is supported or not. These variants
can all share the same device tree.

The USB 2.0 OTG controller is available on the 40-pin header. This is
not enabled in the device tree, since it is possible to use it in a
host-only configuration, or in OTG mode with an extra pin from the
header as the ID pin.

The device tree is based on the one of the Rock64, with various parts
modified to match the ROCK Pi E, and some parts updated to newer styles,
such as the gmac2io node's mdio sub-node.

Add a new device tree file for the new board.

The voltages for the adc-keys were selected to have some tolerances for
resistor variances and the ADC itself also causing voltage drops. Since
the recover button is the only button on the adc line, this should not
cause any issues.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20210117100710.4857-4-wens@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: Add Engicam PX30.Core C.TOUCH 2.0 10.1" OF

PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.

C.TOUCH 2.0 is a general purpose carrier board with capacitive
touch

arm64: dts: rockchip: Add Engicam PX30.Core C.TOUCH 2.0 10.1" OF

PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.

C.TOUCH 2.0 is a general purpose carrier board with capacitive
touch interface support.

10.1" OF is a capacitive touch 10.1" Open Frame panel solutions.

PX30.Core needs to mount on top of C.TOUCH 2.0 carrier with pluged
10.1" OF for creating complete PX30.Core C.TOUCH 2.0 10.1" Open Frame.

Add support for it.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20201109181017.206834-5-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: Add Engicam PX30.Core C.TOUCH 2.0

PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.

C.TOUCH 2.0 is a general purpose carrier board with capacitive
touch interface

arm64: dts: rockchip: Add Engicam PX30.Core C.TOUCH 2.0

PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.

C.TOUCH 2.0 is a general purpose carrier board with capacitive
touch interface support.

PX30.Core needs to mount on top of this Carrier board for creating
complete PX30.Core C.TOUCH 2.0 board.

Add support for it.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Link: https://lore.kernel.org/r/20200929083217.25406-8-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: Add Engicam PX30.Core EDIMM2.2 Starter Kit

PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.

EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive
Evaluatio

arm64: dts: rockchip: Add Engicam PX30.Core EDIMM2.2 Starter Kit

PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.

EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive
Evaluation Board from Engicam.

PX30.Core needs to mount on top of this Evaluation board for
creating complete PX30.Core EDIMM2.2 Starter Kit.

Add support for it.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20200929083217.25406-5-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: Add basic support for Kobol's Helios64

The hardware is described in detail on Kobol's wiki at
https://wiki.kobol.io/helios64/intro/.

Up to now the following peripherals are wo

arm64: dts: rockchip: Add basic support for Kobol's Helios64

The hardware is described in detail on Kobol's wiki at
https://wiki.kobol.io/helios64/intro/.

Up to now the following peripherals are working:

- UART
- Micro-SD card
- eMMC
- ethernet port 1
- status LED
- temperature sensor on i2c bus 2

Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Link: https://lore.kernel.org/r/20201014200030.845759-3-uwe@kleine-koenig.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: Add support for FriendlyARM NanoPi R2S

This adds support for the NanoPi R2S from FriendlyARM.

Rockchip RK3328 SoC
1GB DDR4 RAM
Gigabit Ethernet (WAN)
Gigabit Ethernet (USB3) (

arm64: dts: rockchip: Add support for FriendlyARM NanoPi R2S

This adds support for the NanoPi R2S from FriendlyARM.

Rockchip RK3328 SoC
1GB DDR4 RAM
Gigabit Ethernet (WAN)
Gigabit Ethernet (USB3) (LAN)
USB 2.0 Host Port
MicroSD slot
Reset button
WAN - LAN - SYS LED

Signed-off-by: David Bauer <mail@david-bauer.net>
Link: https://lore.kernel.org/r/20200920154528.88185-2-mail@david-bauer.net
[adapted from sdmmc0m1_gpio to renamed sdmmc0m1_pin]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: add rk3318 A95X Z2 board

The rk3318 A95X Z2 boards are sold as TV box.
No further documentation is given, but from the dts files
extracted it seems that the rk3318 processor is

arm64: dts: rockchip: add rk3318 A95X Z2 board

The rk3318 A95X Z2 boards are sold as TV box.
No further documentation is given, but from the dts files
extracted it seems that the rk3318 processor is simulair
to the rk3328. This dts file contains only the basic nodes
that have support in the mainline kernel.

Features:

CPU: RK3318 Quad-Core Cortex-A53
GPU: Mali-450
RAM: 2/4GB DDR3
ROM: EMMC 16/32/64GB
HDMI: HDMI 2.0a for 4k@60Hz
Ethernet: 10/100M standard RJ-45
WiFi: 2.4G+5G WIFI, 802.11 b/g/n
Bluetooth: 4.0
1 x USB 3.0
1 x USB 2.0
1 x Micro SD card slot
1 x SPDIF
1 x AV
1 x DC IN

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200808160618.15445-4-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: Add Radxa ROCK Pi 4C support

Rock PI 4C has AP6256 Wifi/BT, PoE, miniDP, USB Host enabled
GPIO pin change compared to 4B, 4C.

So, add or enable difference nodes/properties in

arm64: dts: rockchip: Add Radxa ROCK Pi 4C support

Rock PI 4C has AP6256 Wifi/BT, PoE, miniDP, USB Host enabled
GPIO pin change compared to 4B, 4C.

So, add or enable difference nodes/properties in 4C dts
by including common dtsi.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20200807094826.12019-4-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: Add Radxa ROCK Pi 4B support

RockPI 4B has AP6256 Wifi/BT, so enable them in 4B dts
instead of enable in common dtsi.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Li

arm64: dts: rockchip: Add Radxa ROCK Pi 4B support

RockPI 4B has AP6256 Wifi/BT, so enable them in 4B dts
instead of enable in common dtsi.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20200807094826.12019-3-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: Mark rock-pi-4 as rock-pi-4a dts

ROCKPi 4 has 3 variants of hardware platforms called
RockPI 4A, 4B, and 4C.

- ROCKPi 4A has no Wif/BT.
- ROCKPi 4B has AP6256 Wifi/BT, PoE.
-

arm64: dts: rockchip: Mark rock-pi-4 as rock-pi-4a dts

ROCKPi 4 has 3 variants of hardware platforms called
RockPI 4A, 4B, and 4C.

- ROCKPi 4A has no Wif/BT.
- ROCKPi 4B has AP6256 Wifi/BT, PoE.
- ROCKPi 4C has AP6256 Wifi/BT, PoE, miniDP, USB Host enabled
GPIO pin change compared to 4B, 4C

So move common nodes, properties into dtsi file and include
on respective variant dts files.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20200807094826.12019-2-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: add Odroid Advance Go

The Odroid Advance Go is a handheld based on Rockchip's rk3326 soc
with a DSI display and some handheld controls including an analog
joystick connected to

arm64: dts: rockchip: add Odroid Advance Go

The Odroid Advance Go is a handheld based on Rockchip's rk3326 soc
with a DSI display and some handheld controls including an analog
joystick connected to the saradc.

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20200414082938.2977572-3-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: Add initial support for Pinebook Pro

This commit adds initial dt support for the rk3399 based Pinebook Pro.

Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
Link: https:/

arm64: dts: rockchip: Add initial support for Pinebook Pro

This commit adds initial dt support for the rk3399 based Pinebook Pro.

Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
Link: https://lore.kernel.org/r/20200304213023.689983-3-t.schramm@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: Add Radxa Rock Pi N10 initial support

Rock Pi N10 is a Rockchip RK3399Pro based SBC, which has
- VMARC RK3399Pro SOM (as per SMARC standard) from Vamrs.
- Compatible carrier bo

arm64: dts: rockchip: Add Radxa Rock Pi N10 initial support

Rock Pi N10 is a Rockchip RK3399Pro based SBC, which has
- VMARC RK3399Pro SOM (as per SMARC standard) from Vamrs.
- Compatible carrier board from Radxa.

VAMRC RK3399Pro SOM need to mount on top of radxa dalang
carrier board for making Rock Pi N10 SBC.

So, add initial support for Rock Pi N10 by including rk3399,
rk3399pro vamrc-som and raxda dalang carrier board dtsi files.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20191216174711.17856-5-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: split rk3399-rockpro64 for v2 and v2.1 boards

This patch splits rk3399-rockpro64 dts file to 2 files for v2 and
v2.1 boards.

Both v2 and v2.1 boards can use almost same settin

arm64: dts: rockchip: split rk3399-rockpro64 for v2 and v2.1 boards

This patch splits rk3399-rockpro64 dts file to 2 files for v2 and
v2.1 boards.

Both v2 and v2.1 boards can use almost same settings but we find a
difference in I2C address of audio CODEC ES8136.

Reported-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Link: https://lore.kernel.org/r/20191202055929.26540-1-katsuhiro@katsuster.net
[put pine64,rockpro64-v2.* into an enum]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: Split rk3399-roc-pc for with and without mezzanine board.

For rk3399-roc-pc is a mezzanine board available that carries M.2 and
POE interfaces. Use it with a separate dts.

Sig

arm64: dts: rockchip: Split rk3399-roc-pc for with and without mezzanine board.

For rk3399-roc-pc is a mezzanine board available that carries M.2 and
POE interfaces. Use it with a separate dts.

Signed-off-by: Markus Reichl <m.reichl@fivetechno.de>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/0fb4e21a-fe78-00aa-6142-ca8682a913eb@fivetechno.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: Add Beelink A1

Beelink A1 is a TV box implementing the higher-end options of the
RK3328 reference design - the DTB from the stock Android firmware is
clearly the "rk3328-box-pl

arm64: dts: rockchip: Add Beelink A1

Beelink A1 is a TV box implementing the higher-end options of the
RK3328 reference design - the DTB from the stock Android firmware is
clearly the "rk3328-box-plus" variant from the Rockchip 3.10 BSP with
minor modifications to accommodate the USB WiFi module and additional
VFD-style LED driver. It features:

- 4GB of 32-bit LPDDR3
- 16GB of HS200 eMMC (newer models with 32GB also exist)
- Realtek RTL8211F phy for gigabit ethernet
- Fn-Link 6221E-UUC module (RealTek RTL8821CU) for 11ac WiFi
and Bluetooth 4.2
- HDMI and analog A/V
- 1x USB 3.0 type A host, 1x USB 2.0 type A OTG, 1x micro SD
- IR receiver and a neat little LED clock display.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/2aa21c5f3020062cf6a47057bdf3c01f0ec863ea.1571090991.git.robin.murphy@arm.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: Add devicetree for board roc-rk3308-cc

ROC-RK3308-CC is a rk3308 based board designed by Firelfy,
with eMMC and 256MB DDR3 and RTL8188 Wifi on board.

Signed-off-by: Andy Yan <

arm64: dts: rockchip: Add devicetree for board roc-rk3308-cc

ROC-RK3308-CC is a rk3308 based board designed by Firelfy,
with eMMC and 256MB DDR3 and RTL8188 Wifi on board.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Link: https://lore.kernel.org/r/20191030072811.29882-1-andy.yan@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: Add basic dts for RK3308 EVB

This board use uart4 as debug port and arm core voltage
is modulated by pwm, logic voltage is fixed to 1.05V.

Signed-off-by: Andy Yan <andy.yan@ro

arm64: dts: rockchip: Add basic dts for RK3308 EVB

This board use uart4 as debug port and arm core voltage
is modulated by pwm, logic voltage is fixed to 1.05V.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Link: https://lore.kernel.org/r/20191021084657.28629-1-andy.yan@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: Add dts for Leez RK3399 P710 SBC

P710 is a RK3399 based SBC, designed by Leez [0].

Specification
- Rockchip RK3399
- 4/2GB LPDDR4
- TF sd scard slot
- eMMC
- M.2 B-Key for 4G

arm64: dts: rockchip: Add dts for Leez RK3399 P710 SBC

P710 is a RK3399 based SBC, designed by Leez [0].

Specification
- Rockchip RK3399
- 4/2GB LPDDR4
- TF sd scard slot
- eMMC
- M.2 B-Key for 4G LTE
- AP6256 for WiFi + BT
- Gigabit ethernet
- HDMI out
- 40 pin header
- USB 2.0 x 2
- USB 3.0 x 1
- USB 3.0 Type-C x 1
- TYPE-C Power supply

[0]https://leez.lenovo.com

Signed-off-by: Andy Yan <andyshrk@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: Add support for Hugsun X99 TV Box

Add devicetree support for Hugsun X99 TV Box based on RK3399 SoC

Tested with LibreElec running kernel v5.1.2.
Following peripherals tested an

arm64: dts: rockchip: Add support for Hugsun X99 TV Box

Add devicetree support for Hugsun X99 TV Box based on RK3399 SoC

Tested with LibreElec running kernel v5.1.2.
Following peripherals tested and work:

Peripheral works:
- UART2 debug
- eMMC
- USB 3.0 port
- USB 2.0 port
- sdio, sd-card
- HDMI
- Ethernet
- WiFi/BT

Not tested:
- Type-C port
- OPTICAL
- IR

Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: Add support for Khadas Edge/Edge-V/Captain boards

Add devicetree support for Khadas Edge/Edge-V/Captain boards.
Khadas Edge is an expandable Rockchip RK3399 board with goldfing

arm64: dts: rockchip: Add support for Khadas Edge/Edge-V/Captain boards

Add devicetree support for Khadas Edge/Edge-V/Captain boards.
Khadas Edge is an expandable Rockchip RK3399 board with goldfinger.
Khadas Captain is the carrier board for Khadas Edge.
Khadas Edge-V is a Khadas VIM form factor Rockchip RK3399 board.

Signed-off-by: Nick Xie <nick@khadas.com>
[edge-captain and edge-v contain different components that are supposed
to get added in future patches, so should stay separate while looking
somewhat similar right now]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...