arm64: dts: rockchip: Add NanoPC T6

Add the NanoPC T6, a single board computer from FriendlyElec based on
the RK3588.

Initial device tree supports debug UART, SD, eMMC, PCIe 3, PMIC,
and 40 pin GPI

arm64: dts: rockchip: Add NanoPC T6

Add the NanoPC T6, a single board computer from FriendlyElec based on
the RK3588.

Initial device tree supports debug UART, SD, eMMC, PCIe 3, PMIC,
and 40 pin GPIO assignments.

Signed-off-by: Thomas McKahan <tmckahan@singleboardsolutions.com>
Link: https://lore.kernel.org/r/20230809112120.99-3-tmckahan@singleboardsolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: add dts for Firefly Station P2 aka rk3568-roc-pc

Add dts for Firefly Station P2.
Working IO:
* eMMC
* HDMI
* LAN
* LED
* SD Card
* UART
* USB2
* USB3

Signed-off-by: Furkan Kar

arm64: dts: rockchip: add dts for Firefly Station P2 aka rk3568-roc-pc

Add dts for Firefly Station P2.
Working IO:
* eMMC
* HDMI
* LAN
* LED
* SD Card
* UART
* USB2
* USB3

Signed-off-by: Furkan Kardame <f.kardame@manjaro.org>
Link: https://lore.kernel.org/r/20230620184746.55391-3-f.kardame@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: Add Radxa ROCK 4SE

Add board-specific devicetree file for the RK3399T-based Radxa ROCK 4SE
board. This board offers similar peripherals in a similar form-factor to
the existing

arm64: dts: rockchip: Add Radxa ROCK 4SE

Add board-specific devicetree file for the RK3399T-based Radxa ROCK 4SE
board. This board offers similar peripherals in a similar form-factor to
the existing ROCK Pi 4B but uses the cost-optimised RK3399T processor
(which has different OPP table than the RK3399) and other minimal hardware
changes.

Signed-off-by: Christopher Obbard <chris.obbard@collabora.com>
Link: https://lore.kernel.org/r/20230710115025.507439-4-chris.obbard@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: Add Indiedroid Nova board

The Indiedroid Nova is an SBC from a sub-brand of Ameridroid that
includes the following hardware:

- A 40-pin GPIO header
- 2 USB-A 3.0 ports
- 2

arm64: dts: rockchip: Add Indiedroid Nova board

The Indiedroid Nova is an SBC from a sub-brand of Ameridroid that
includes the following hardware:

- A 40-pin GPIO header
- 2 USB-A 3.0 ports
- 2 USB-A 2.0 ports
- A USB-C 2.0 OTG port (used for USB power delivery)
- A USB-C 3.0 port that can do display port output.
- A Micro HDMI 2.1 port.
- A 1GB ethernet port.
- An RT8821CS based WiFi/Bluetooth module.
- A user replaceable eMMC module.
- An SDMMC card slot.
- A MIPI DSI connector.
- A MIPI CSI connector.
- A 3.5mm TRRS audio jack with microphone input.
- An 2 pin socket for an RTC battery.
- A 4 pin socket for a debug port.
- A power button (connected to PMIC), a reset button (connected to SoC
reset), a boot button, and a recovery button (both connected to the
ADC).
- 4GB, 8GB, or 16GB of system RAM.

This initial devicetree includes support for the WiFi, bluetooth,
analog audio out/in, SDMMC, eMMC, RTC, UART debugging, and has
the regulator values from the schematics. ADC, graphics output, GPU,
USB, and wired ethernet are still pending additional upstream changes.

Analog audio will require changes to handle a difference between the
requested clock frequency of 12288000 and the actual clock freqency
of 12287999 before it will work properly. This will be done in a
subsequent patch series.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20230531161220.280744-6-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: Add rk3588 Edgeble Neu6 Model B IO

Neural Compute Module 6B(Neu6B) IO board is an industrial form factor
ready-to-use IO board from Edgeble AI.

IO board offers plenty of perip

arm64: dts: rockchip: Add rk3588 Edgeble Neu6 Model B IO

Neural Compute Module 6B(Neu6B) IO board is an industrial form factor
ready-to-use IO board from Edgeble AI.

IO board offers plenty of peripherals and connectivity options and
this patch enables basic eMMC and UART which is enough to successfully
boot Linux.

General features:
- microSD slot
- 1x HDMI Out
- 1x HDMI In
- 2x DP
- 1x eDP
- 2x MIPI DSI connector
- 4x MIPI CSI2 connector
- 2x USB Host
- 2x USB 3.0 OTG/Host
- 1x SATA
- 1x 2.5Gbps Ethernet
- 1x 4G/5G mini PCIe
- 1x M.2 E-Key slot
- 1x Onboard PoE
- 1x RS485, RS232, CAN
- 1x Audio, MIC port
- RTC battery slot
- 40-pin GPIO expansion

Neu6B needs to mount on top of this IO board in order to create a
complete Edgeble Neural Compute Module 6B(Neu6B) IO platform.

Add support for Edgeble Neu6 Model B IO Board.

Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Link: https://lore.kernel.org/r/20230516163454.997736-4-jagan@edgeble.ai
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: Add FriendlyARM NanoPi R2C Plus

The NanoPi R2C Plus is a small variant of NanoPi R2C with a on-board
eMMC flash (8G) included.

Signed-off-by: Tianling Shen <cnsztl@gmail.com>

arm64: dts: rockchip: Add FriendlyARM NanoPi R2C Plus

The NanoPi R2C Plus is a small variant of NanoPi R2C with a on-board
eMMC flash (8G) included.

Signed-off-by: Tianling Shen <cnsztl@gmail.com>
Link: https://lore.kernel.org/r/20230513135307.26554-2-cnsztl@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: add Anbernic RG353PS

Add support for the Anbernic RG353PS. This device is identical in form
factor to the RG353P and has the following hardware differences:
- No touchscreen i

arm64: dts: rockchip: add Anbernic RG353PS

Add support for the Anbernic RG353PS. This device is identical in form
factor to the RG353P and has the following hardware differences:
- No touchscreen is present on i2c2 (or at all).
- Only contains 1GB of RAM.
- Has no eMMC.
- Only appears to ship with the 2nd revision of the display panel.

Note that the display panel has been added to the st7703 panel driver
in a separate commit series.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20230512162039.31132-3-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: Add Lunzn Fastrhino R68S

It's similar to Fastrhino R66S with the following changes:
+ 2/4GB LPDDR4 RAM
+ 2x 1000 Base-T (native, RTL8211f)
+ ADC button
+ 16GB eMMC on-board
- N

arm64: dts: rockchip: Add Lunzn Fastrhino R68S

It's similar to Fastrhino R66S with the following changes:
+ 2/4GB LPDDR4 RAM
+ 2x 1000 Base-T (native, RTL8211f)
+ ADC button
+ 16GB eMMC on-board
- No SD card slot

Signed-off-by: Tianling Shen <cnsztl@gmail.com>
Link: https://lore.kernel.org/r/20230506061108.17658-3-cnsztl@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: Add Lunzn Fastrhino R66S

Lunzn Fastrhino R66S is a high-performance mini router.

Specification:
- Rockchip RK3568
- 1/2GB LPDDR4 RAM
- SD card slot
- 2x USB 3.0 Port
- 2x 2500

arm64: dts: rockchip: Add Lunzn Fastrhino R66S

Lunzn Fastrhino R66S is a high-performance mini router.

Specification:
- Rockchip RK3568
- 1/2GB LPDDR4 RAM
- SD card slot
- 2x USB 3.0 Port
- 2x 2500 Base-T (PCIe, r8125b)
- 12v DC Jack

Signed-off-by: Tianling Shen <cnsztl@gmail.com>
Link: https://lore.kernel.org/r/20230506061108.17658-2-cnsztl@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: Add Xunlong OrangePi R1 Plus LTS

The OrangePi R1 Plus LTS is a minor variant of OrangePi R1 Plus with
the on-board NIC chip changed from rtl8211e to yt8531c, and otherwise
iden

arm64: dts: rockchip: Add Xunlong OrangePi R1 Plus LTS

The OrangePi R1 Plus LTS is a minor variant of OrangePi R1 Plus with
the on-board NIC chip changed from rtl8211e to yt8531c, and otherwise
identical to OrangePi R1 Plus.

Signed-off-by: Tianling Shen <cnsztl@gmail.com>
Link: https://lore.kernel.org/r/20230325074022.9818-5-cnsztl@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: Add FriendlyARM NanoPi R2C

The NanoPi R2C is a minor variant of NanoPi R2S with the on-board NIC
chip changed from rtl8211e to yt8521s, and otherwise identical to R2S.

Signed-

arm64: dts: rockchip: Add FriendlyARM NanoPi R2C

The NanoPi R2C is a minor variant of NanoPi R2S with the on-board NIC
chip changed from rtl8211e to yt8521s, and otherwise identical to R2S.

Signed-off-by: Tianling Shen <cnsztl@gmail.com>
Link: https://lore.kernel.org/r/20230325074022.9818-3-cnsztl@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: Add FriendlyARM NanoPi R5C

FriendlyARM NanoPi R5C is an open-sourced mini IoT gateway device.

Specification:
- Rockchip RK3568
- 1/4GB LPDDR4X RAM
- 8/32GB eMMC
- SD card slot

arm64: dts: rockchip: Add FriendlyARM NanoPi R5C

FriendlyARM NanoPi R5C is an open-sourced mini IoT gateway device.

Specification:
- Rockchip RK3568
- 1/4GB LPDDR4X RAM
- 8/32GB eMMC
- SD card slot
- M.2 Connector
- 2x USB 3.0 Port
- 2x 2500 Base-T (PCIe, r8125)
- HDMI 2.0
- MIPI DSI/CSI
- USB Type C 5V

Signed-off-by: Tianling Shen <cnsztl@gmail.com>
Link: https://lore.kernel.org/r/20230318083745.6181-4-cnsztl@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: Add FriendlyElec Nanopi R5S

FriendlyElec Nanopi R5S is an open-sourced mini IoT gateway device.

Board Specifications
- Rockchip RK3568
- 2 or 4GB LPDDR4X
- 8GB or 16GB eMMC, S

arm64: dts: rockchip: Add FriendlyElec Nanopi R5S

FriendlyElec Nanopi R5S is an open-sourced mini IoT gateway device.

Board Specifications
- Rockchip RK3568
- 2 or 4GB LPDDR4X
- 8GB or 16GB eMMC, SD card slot
- GbE LAN (Native)
- 2x 2.5G LAN (PCIe)
- M.2 Connector
- HDMI 2.0, MIPI DSI/CSI
- 2xUSB 3.0 Host
- USB Type C PD, 5V/9V/12V
- GPIO: 12-pin 0.5mm FPC connector

Based on Tianling Shen's <cnsztl@gmail.com> work.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Link: https://lore.kernel.org/r/20230308063240.107178-2-anarsoul@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: Add Khadas edge2 board

Edge2 is an ultraslim, credit-card sized ARM PC designed by Khadas.

In this patch, we will add basic device tree support for this board,
Only eMMC, UART

arm64: dts: rockchip: Add Khadas edge2 board

Edge2 is an ultraslim, credit-card sized ARM PC designed by Khadas.

In this patch, we will add basic device tree support for this board,
Only eMMC, UART are enabled, so it's capable of booting into
a basic linux system from eMMC via serial console.

Signed-off-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20230315033441.32719-3-dlan@gentoo.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: Add Radxa Compute Module 3 IO board

Radxa Compute Module 3(CM3) IO board is an application board from Radxa
and is compatible with Raspberry Pi CM4 IO form factor.

Specificati

arm64: dts: rockchip: Add Radxa Compute Module 3 IO board

Radxa Compute Module 3(CM3) IO board is an application board from Radxa
and is compatible with Raspberry Pi CM4 IO form factor.

Specification:
- 1x HDMI,
- 2x MIPI DSI
- 2x MIPI CSI2
- 1x eDP
- 1x PCIe card
- 2x SATA
- 2x USB 2.0 Host
- 1x USB 3.0
- 1x USB 2.0 OTG
- Phone jack
- microSD slot
- 40-pin GPIO expansion header
- 12V DC

Radxa CM3 needs to mount on top of this IO board in order to create
complete Radxa CM3 IO board platform.

Add support for Radxa CM3 IO Board.

Co-developed-by: FUKAUMI Naoki <naoki@radxa.com>
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Co-developed-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com>
Signed-off-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20230112105902.192852-3-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: rk3588: Add Edgeble Neu6 Model A IO

Neural Compute Module 6(Neu6) IO board is an industrial form factor
ready-to-use IO board from Edgeble AI.

IO board offers plenty of periph

arm64: dts: rockchip: rk3588: Add Edgeble Neu6 Model A IO

Neural Compute Module 6(Neu6) IO board is an industrial form factor
ready-to-use IO board from Edgeble AI.

IO board offers plenty of peripherals and connectivity options and
this patch enables basic eMMC and UART which is enough to successfully
boot Linux.

Neu6 needs to mount on top of this IO board in order to create a
complete Edgeble Neural Compute Module 6(Neu6) IO platform.

Add support for Edgeble Neu6 Model A IO Board.

Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Link: https://lore.kernel.org/r/20230110134658.820691-3-jagan@edgeble.ai
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: Add rock-5b board

Add board file for the RK3588 Rock 5B board. This is a basic
implementation which just brings up the eMMC and UART which is
enough to successfully boot Linux.

arm64: dts: rockchip: Add rock-5b board

Add board file for the RK3588 Rock 5B board. This is a basic
implementation which just brings up the eMMC and UART which is
enough to successfully boot Linux.

The ethernet controller is connected via PCIe so support will
come in a follow-up patch.

Signed-off-by: Christopher Obbard <chris.obbard@collabora.com>
Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230109155801.51642-8-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: Add rock-5a board

Add board file for the RK3588s Rock 5A board. While the hardware
offers plenty of peripherals and connectivity this basic implementation
just handles things r

arm64: dts: rockchip: Add rock-5a board

Add board file for the RK3588s Rock 5A board. While the hardware
offers plenty of peripherals and connectivity this basic implementation
just handles things required to access eMMC, UART and Ethernet (i.e.
enough to successfully boot Linux).

Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Tested-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230109155801.51642-7-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: Add rk3588-evb1 board

Add board file for the RK3588 evaluation board. While the hardware
offers plenty of peripherals and connectivity this basic implementation
just handles th

arm64: dts: rockchip: Add rk3588-evb1 board

Add board file for the RK3588 evaluation board. While the hardware
offers plenty of peripherals and connectivity this basic implementation
just handles things required to successfully boot Linux from eMMC,
connect via UART or Ethernet.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
[rebase, update commit message, use EVB1 for SoC bringup]
Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Jagan Teki <jagan@edgeble.ai>
Link: https://lore.kernel.org/r/20230109155801.51642-6-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: rk3328: Add Orange Pi R1 Plus

Orange Pi R1 Plus is a Rockchip RK3328 based SBC by Xunlong.

This device is similar to the NanoPi R2S, and has a 16MB
SPI NOR (mx25l12805d). The

arm64: dts: rockchip: rk3328: Add Orange Pi R1 Plus

Orange Pi R1 Plus is a Rockchip RK3328 based SBC by Xunlong.

This device is similar to the NanoPi R2S, and has a 16MB
SPI NOR (mx25l12805d). The reset button is changed to
directly reset the power supply, another detail is that
both network ports have independent MAC addresses.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20221203074149.11543-3-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: Add dts for EmbedFire rk3568 LubanCat 2

LubanCat 2 is a rk3568 based SBC from EmbedFire.

Specification:
- Rockchip rk3568
- LPDDR4/4X 1/2/4/8 GB
- TF scard slot
- eMMC 8/32/64

arm64: dts: rockchip: Add dts for EmbedFire rk3568 LubanCat 2

LubanCat 2 is a rk3568 based SBC from EmbedFire.

Specification:
- Rockchip rk3568
- LPDDR4/4X 1/2/4/8 GB
- TF scard slot
- eMMC 8/32/64/128 GB
- Gigabit ethernet x 2
- HDMI out
- USB 2.0 Host x 1
- USB 2.0 Type-C OTG x 1
- USB 3.0 Host x 1
- Mini PCIE interface for WIFI/BT module
- M.2 key for 2280 NVME
- 40 pin header

Signed-off-by: Andy Yan <andyshrk@163.com>
Link: https://lore.kernel.org/r/20230108110817.2214859-1-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: Add EmbedFire LubanCat 1

The LubanCat 1 is a RK3566 based SBC, developed by Dongguan EmbedFire
Electronic Technology Co., Ltd.

It has the following characteristics:
- MicroSD

arm64: dts: rockchip: Add EmbedFire LubanCat 1

The LubanCat 1 is a RK3566 based SBC, developed by Dongguan EmbedFire
Electronic Technology Co., Ltd.

It has the following characteristics:
- MicroSD card slot, onboard eMMC flash memory
- 1GbE Realtek RTL8211F Ethernet Transceiver
- 1 USB Type-C port (power and USB2.0 OTG)
- 1 USB 3.0 Host port
- 3 USB 2.0 Host ports
- 1 HDMI
- 1 infrared receiver
- 1 MIPI DSI
- 1 MIPI CSI
- 1 x 4-section headphone jack
- Mini PCIe socket (USB or PCIe)
- 1 SIM Card slot
- 1 SYS LED and 1 PWR LED
- 40-pin GPIO expansion header

Signed-off-by: Wenhao Cui <lasstp5011@gmail.com>
Signed-off-by: Yuteng Zhong <zonyitoo@gmail.com>
Link: https://lore.kernel.org/r/Y6UdjhBD/Xa7ALya@VM-66-53-centos
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: Add Radxa CM3I E25

Radxa E25 is a network application carrier board for the Radxa CM3
Industrial (CM3I) SoM, which is based on the Rockchip RK3568 SoC.

It has the following fe

arm64: dts: rockchip: Add Radxa CM3I E25

Radxa E25 is a network application carrier board for the Radxa CM3
Industrial (CM3I) SoM, which is based on the Rockchip RK3568 SoC.

It has the following features:

- MicroSD card socket, on board eMMC flash
- 2x 2.5GbE Realtek RTL8125B Ethernet transceiver
- 1x USB Type-C port (Power and Serial console)
- 1x USB 3.0 OTG port
- mini PCIe socket (USB or PCIe)
- ngff PCIe socket (USB or SATA)
- 1x User LED and 16x RGB LEDs
- 26-pin expansion header

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20221209102524.129367-3-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: Add SOQuartz Model A baseboard

This patch adds the device tree for the "Model A" baseboard for
the SOQuartz CM4 SoM, which is not to be confused with the
Quartz64 Model A, whic

arm64: dts: rockchip: Add SOQuartz Model A baseboard

This patch adds the device tree for the "Model A" baseboard for
the SOQuartz CM4 SoM, which is not to be confused with the
Quartz64 Model A, which is the same form factor and SoC, but is
not a CM4 carrier board.

The board features a PCIe 2 x1 slot, USB 2 host ports, CSI/DSI
connectors, an eDP FFC connector, gigabit ethernet, HDMI, and a
12V DC barrel jack. Also present is a microSD card slot, 40-pin
GPIO, and a power and reset button.

Signed-off-by: Andrew Powers-Holmes <aholmes@omnom.net>
[rebase, misc fixes, reword]
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Link: https://lore.kernel.org/r/20221116115337.541601-5-frattaroli.nicolas@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...

arm64: dts: rockchip: Add SOQuartz blade board

This adds a device tree for the PINE64 SOQuartz blade baseboard,
a 1U rack mountable baseboard for the CM4 form factor with PoE
support designed for th

arm64: dts: rockchip: Add SOQuartz blade board

This adds a device tree for the PINE64 SOQuartz blade baseboard,
a 1U rack mountable baseboard for the CM4 form factor with PoE
support designed for the SOQuartz CM4 System-on-Module.

The board takes power from either PoE or a 5V DC input, and allows
for mounting an M.2 SSD.

The board also features one USB 2.0 host port, one HDMI output,
a 3.5mm jack for UART, and the aforementioned gigabit networking
port.

Signed-off-by: Andrew Powers-Holmes <aholmes@omnom.net>
[rebase, squash, reword, misc fixes]
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Link: https://lore.kernel.org/r/20221116115337.541601-3-frattaroli.nicolas@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

show more ...