|
Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12 |
|
| #
6ec57913 |
| 09-Feb-2023 |
Biju Das <biju.das.jz@bp.renesas.com> |
arm64: dts: renesas: rzv2mevk2: Add uart0 pins
Add uart0 pins in pinctrl node and update the uart0 node
to include pinctrl and uart-has-rtscts properties.
Signed-off-by: Biju Das <biju.das.jz@bp.re
arm64: dts: renesas: rzv2mevk2: Add uart0 pins
Add uart0 pins in pinctrl node and update the uart0 node
to include pinctrl and uart-has-rtscts properties.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230209131422.192941-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
show more ...
|
|
Revision tags: v6.1.11, v6.1.10, v6.1.9 |
|
| #
b6c0be72 |
| 30-Jan-2023 |
Fabrizio Castro <fabrizio.castro.jz@renesas.com> |
arm64: dts: renesas: rzv2mevk2: Add uSD card and eMMC support
The RZ/V2M EVK comes with a slot for a uSD card, and an eMMC.
Add support for the both of them.
Please note that the pinctrl driver for
arm64: dts: renesas: rzv2mevk2: Add uSD card and eMMC support
The RZ/V2M EVK comes with a slot for a uSD card, and an eMMC.
Add support for the both of them.
Please note that the pinctrl driver for RZ/V2M doesn't support
interrupts yet, therefore the card detect pin has been connected
to the SDHI IP directly in this patch.
We'll connect the card detect pin to its corresponding GPIO when
we'll have driver support for interrupts in the RZ/V2M pinctrl
driver.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230130191152.182826-1-fabrizio.castro.jz@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
show more ...
|
|
Revision tags: v6.1.8 |
|
| #
a17039b6 |
| 21-Jan-2023 |
Biju Das <biju.das.jz@bp.renesas.com> |
arm64: dts: renesas: rzv2mevk2: Enable USB3 role switch
Enable USB3 role switch on RZ/V2M EVK by linking USB3 peri node
with hd3ss3220 controller node.
Signed-off-by: Biju Das <biju.das.jz@bp.renes
arm64: dts: renesas: rzv2mevk2: Enable USB3 role switch
Enable USB3 role switch on RZ/V2M EVK by linking USB3 peri node
with hd3ss3220 controller node.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230121145853.4792-13-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
show more ...
|
| #
967219e5 |
| 21-Jan-2023 |
Biju Das <biju.das.jz@bp.renesas.com> |
arm64: dts: renesas: rzv2mevk2: Enable USB3 DRD, Peripheral and Host
Enable USB3 Host, Peripheral and DRD modules on RZ/V2M EVK.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Ge
arm64: dts: renesas: rzv2mevk2: Enable USB3 DRD, Peripheral and Host
Enable USB3 Host, Peripheral and DRD modules on RZ/V2M EVK.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230121145853.4792-12-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
show more ...
|
| #
3d28ccb9 |
| 18-Jan-2023 |
Fabrizio Castro <fabrizio.castro.jz@renesas.com> |
arm64: dts: renesas: v2mevk2: Add PWC support
The RZ/V2M EVK uses the PWC IP to control external power supplies
and the I/O voltage for the uSD card.
This patch enables the PWC node, and it also en
arm64: dts: renesas: v2mevk2: Add PWC support
The RZ/V2M EVK uses the PWC IP to control external power supplies
and the I/O voltage for the uSD card.
This patch enables the PWC node, and it also enables the poweroff
features since PWC is actually used to control the board power
rails.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230118144747.24968-3-fabrizio.castro.jz@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
show more ...
|
|
Revision tags: v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78 |
|
| #
594edf2c |
| 03-Nov-2022 |
Fabrizio Castro <fabrizio.castro.jz@renesas.com> |
arm64: dts: renesas: rzv2mevk2: Enable watchdog
Enable the watchdog so that we can reboot the system.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Link: https://lore.kernel.org/r
arm64: dts: renesas: rzv2mevk2: Enable watchdog
Enable the watchdog so that we can reboot the system.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Link: https://lore.kernel.org/r/20221103223956.50575-4-fabrizio.castro.jz@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
show more ...
|
|
Revision tags: v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62 |
|
| #
39ffd330 |
| 19-Aug-2022 |
Phil Edworthy <phil.edworthy@renesas.com> |
arm64: dts: renesas: rzv2m evk: Enable i2c
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Link: https://lore.kernel.org/r/20220819193944.337599-4-phil.edworthy@renesas.com
Signed-off-by: G
arm64: dts: renesas: rzv2m evk: Enable i2c
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Link: https://lore.kernel.org/r/20220819193944.337599-4-phil.edworthy@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
show more ...
|
|
Revision tags: v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18 |
|
| #
dc242571 |
| 20-May-2022 |
Phil Edworthy <phil.edworthy@renesas.com> |
arm64: dts: renesas: rzv2mevk2: Enable ethernet
Enable Ethernet interface on RZ/V2M EVK.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
arm64: dts: renesas: rzv2mevk2: Enable ethernet
Enable Ethernet interface on RZ/V2M EVK.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220520100736.15182-1-phil.edworthy@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
show more ...
|
|
Revision tags: v5.15.41, v5.15.40, v5.15.39, v5.15.38 |
|
| #
ad1bd2bf |
| 03-May-2022 |
Phil Edworthy <phil.edworthy@renesas.com> |
arm64: dts: renesas: Add initial device tree for RZ/V2M EVK
Add basic support for RZ/V2M EVK (based on R9A09G011):
- memory
- External input clock
- UART
Signed-off-by: Phil Edworthy <phil.edworthy
arm64: dts: renesas: Add initial device tree for RZ/V2M EVK
Add basic support for RZ/V2M EVK (based on R9A09G011):
- memory
- External input clock
- UART
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220503115557.53370-13-phil.edworthy@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
show more ...
|