#
c91dfc98 |
| 17-Sep-2020 |
Geert Uytterhoeven <geert+renesas@glider.be> |
arm64: dts: renesas: r8a774c0: Fix MSIOF1 DMA channels According to Technical Update TN-RCT-S0352A/E, MSIOF1 DMA can only be used with SYS-DMAC0 on R-Car E3. Fixes: 62c0056f1c3e
arm64: dts: renesas: r8a774c0: Fix MSIOF1 DMA channels According to Technical Update TN-RCT-S0352A/E, MSIOF1 DMA can only be used with SYS-DMAC0 on R-Car E3. Fixes: 62c0056f1c3eb15d ("arm64: dts: renesas: r8a774c0: Add MSIOF nodes") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200917132117.8515-3-geert+renesas@glider.be
show more ...
|
#
a2053990 |
| 21-Aug-2020 |
Geert Uytterhoeven <geert+renesas@glider.be> |
arm64: dts: renesas: Fix pin controller node names According to Devicetree Specification v0.2 and later, Section "Generic Names Recommendation", the node name for a pin controller device
arm64: dts: renesas: Fix pin controller node names According to Devicetree Specification v0.2 and later, Section "Generic Names Recommendation", the node name for a pin controller device node should be "pinctrl". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20200821112433.5652-1-geert+renesas@glider.be
show more ...
|
Revision tags: v5.8.2, v5.4.59 |
|
#
0c77ecdc |
| 14-Aug-2020 |
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> |
arm64: dts: renesas: r8a774c0: Add PCIe EP node Add PCIe EP node to R8A774C0 (RZ/G2E) SoC dtsi. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-b
arm64: dts: renesas: r8a774c0: Add PCIe EP node Add PCIe EP node to R8A774C0 (RZ/G2E) SoC dtsi. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20200814173037.17822-6-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
show more ...
|
Revision tags: v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9 |
|
#
a6cb262a |
| 10-Jul-2020 |
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> |
arm64: dts: renesas: Fix SD Card/eMMC interface device node names Fix the device node names as "mmc@". Fixes: 663386c3e1aa ("arm64: dts: renesas: r8a774a1: Add SDHI nodes") Fixe
arm64: dts: renesas: Fix SD Card/eMMC interface device node names Fix the device node names as "mmc@". Fixes: 663386c3e1aa ("arm64: dts: renesas: r8a774a1: Add SDHI nodes") Fixes: 9b33e3001b67 ("arm64: dts: renesas: Initial r8a774b1 SoC device tree") Fixes: 77223211f44d ("arm64: dts: renesas: r8a774c0: Add SDHI nodes") Fixes: d9d67010e0c6 ("arm64: dts: r8a7795: Add SDHI support to dtsi") Fixes: a513cf1e6457 ("arm64: dts: r8a7796: add SDHI nodes") Fixes: 111cc9ace2b5 ("arm64: dts: renesas: r8a77961: Add SDHI nodes") Fixes: f51746ad7d1f ("arm64: dts: renesas: Add Renesas R8A77961 SoC support") Fixes: df863d6f95f5 ("arm64: dts: renesas: initial R8A77965 SoC device tree") Fixes: 9aa3558a02f0 ("arm64: dts: renesas: ebisu: Add and enable SDHI device nodes") Fixes: 83f18749c2f6 ("arm64: dts: renesas: r8a77995: Add SDHI (MMC) support") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1594382634-13714-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
show more ...
|
Revision tags: v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35 |
|
#
cf8ae446 |
| 21-Apr-2020 |
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> |
arm64: dts: renesas: Fix IOMMU device node names Fix IOMMU device node names as "iommu@". Fixes: 8f507babc617 ("arm64: dts: renesas: r8a774a1: Add IPMMU device nodes") Fixes: 63
arm64: dts: renesas: Fix IOMMU device node names Fix IOMMU device node names as "iommu@". Fixes: 8f507babc617 ("arm64: dts: renesas: r8a774a1: Add IPMMU device nodes") Fixes: 63093a8e58be ("arm64: dts: renesas: r8a774b1: Add IPMMU device nodes") Fixes: 6c7e02178e8f ("arm64: dts: renesas: r8a774c0: Add IPMMU device nodes") Fixes: 3b7e7848f0e8 ("arm64: dts: renesas: r8a7795: Add IPMMU device nodes") Fixes: e4b9a493df45 ("arm64: dts: renesas: r8a7795-es1: Add IPMMU device nodes") Fixes: 389baa409617 ("arm64: dts: renesas: r8a7796: Add IPMMU device nodes") Fixes: 55697cbb44e4 ("arm64: dts: renesas: r8a779{65,80,90}: Add IPMMU devices nodes") Fixes: ce3b52a1595b ("arm64: dts: renesas: r8a77970: Add IPMMU device nodes") Fixes: a3901e7398e1 ("arm64: dts: renesas: r8a77995: Add IPMMU device nodes") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/1587461775-13369-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
show more ...
|
Revision tags: v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21 |
|
#
721b7619 |
| 18-Feb-2020 |
Geert Uytterhoeven <geert+renesas@glider.be> |
arm64: dts: renesas: rzg2: Add reset control properties for display Add reset control properties to the device nodes for the Display Units on all supported RZ/G2 SoCs. Note that on thes
arm64: dts: renesas: rzg2: Add reset control properties for display Add reset control properties to the device nodes for the Display Units on all supported RZ/G2 SoCs. Note that on these SoCs, there is only a single reset for each pair of DU channels. Join the clocks lines while at it, to increase uniformity. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20200218133019.22299-5-geert+renesas@glider.be
show more ...
|
Revision tags: v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9 |
|
#
03abfdd3 |
| 05-Nov-2019 |
Geert Uytterhoeven <geert+renesas@glider.be> |
arm64: dts: renesas: rcar-gen3: Replace "vsps" by "renesas,vsps" The Renesas-specific "vsps" property lacks a vendor prefix. Add a "renesas," prefix to comply with DT best practises.
arm64: dts: renesas: rcar-gen3: Replace "vsps" by "renesas,vsps" The Renesas-specific "vsps" property lacks a vendor prefix. Add a "renesas," prefix to comply with DT best practises. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20191105183504.21447-4-geert+renesas@glider.be
show more ...
|
#
9504a9f2 |
| 13-Dec-2019 |
Geert Uytterhoeven <geert+renesas@glider.be> |
arm64: dts: renesas: Group tuples in pci ranges and dma-ranges properties To improve human readability and enable automatic validation, the tuples in the "ranges" and "dma-ranges" proper
arm64: dts: renesas: Group tuples in pci ranges and dma-ranges properties To improve human readability and enable automatic validation, the tuples in the "ranges" and "dma-ranges" properties of PCI device nodes should be grouped. Fix this by grouping the tuples of the "ranges" and "dma-ranges" properties using angle brackets. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191213164115.3697-8-geert+renesas@glider.be Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
show more ...
|
#
0aab5b91 |
| 13-Dec-2019 |
Geert Uytterhoeven <geert+renesas@glider.be> |
arm64: dts: renesas: Group tuples in interrupt properties To improve human readability and enable automatic validation, the tuples in the various properties containing interrupt specifie
arm64: dts: renesas: Group tuples in interrupt properties To improve human readability and enable automatic validation, the tuples in the various properties containing interrupt specifiers should be grouped. While "make dtbs_check" does not impose this yet for the "interrupts" property, it does for the "interrupt-map" property. Fix this by grouping the tuples of the "interrupts" and "interrupt-map" properties using angle brackets. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191213164115.3697-7-geert+renesas@glider.be Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
show more ...
|
Revision tags: v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3 |
|
#
652fd0f4 |
| 13-Sep-2019 |
Biju Das <biju.das@bp.renesas.com> |
arm64: dts: renesas: r8a774c0: Add dynamic power coefficient Describe the dynamic power coefficient of A53 CPUs. Based on work by Gaku Inami <gaku.inami.xw@bp.renesas.com> and other
arm64: dts: renesas: r8a774c0: Add dynamic power coefficient Describe the dynamic power coefficient of A53 CPUs. Based on work by Gaku Inami <gaku.inami.xw@bp.renesas.com> and others. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Link: https://lore.kernel.org/r/1568364608-46548-2-git-send-email-biju.das@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
show more ...
|
#
8438bfda |
| 13-Sep-2019 |
Biju Das <biju.das@bp.renesas.com> |
arm64: dts: renesas: r8a774c0: Create thermal zone to support IPA Setup a thermal zone driven by SoC temperature sensor. Create passive trip points and bind them to CPUFreq cooling d
arm64: dts: renesas: r8a774c0: Create thermal zone to support IPA Setup a thermal zone driven by SoC temperature sensor. Create passive trip points and bind them to CPUFreq cooling device that supports power extension. Based on the work done by Dien Pham <dien.pham.ry@renesas.com> and others for r8a77990 SoC. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Link: https://lore.kernel.org/r/1568364608-46548-1-git-send-email-biju.das@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
show more ...
|
Revision tags: v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2 |
|
#
38290431 |
| 06-Jul-2019 |
Jacopo Mondi <jacopo+renesas@jmondi.org> |
arm64: dts: renesas: Update 'vsps' properties for readability Update the 'vsps' property in the R-Car Gen3 SoC device tree files to match what's in the documentation example. Si
arm64: dts: renesas: Update 'vsps' properties for readability Update the 'vsps' property in the R-Car Gen3 SoC device tree files to match what's in the documentation example. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
show more ...
|
#
23ad2b46 |
| 21-Aug-2019 |
Geert Uytterhoeven <geert+renesas@glider.be> |
arm64: dts: renesas: r8a774c0: Fix register range of display node Since the R8A774C0 SoC uses DU{0,1} only, the register block length should be 0x40000. Based on commit 06585ed3
arm64: dts: renesas: r8a774c0: Fix register range of display node Since the R8A774C0 SoC uses DU{0,1} only, the register block length should be 0x40000. Based on commit 06585ed38b6698bc ("arm64: dts: renesas: r8a77990: Fix register range of display node") for R-Car E3. Fixes: 8ed3a6b223159df3 ("arm64: dts: renesas: r8a774c0: Add display output support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
show more ...
|
#
e376df94 |
| 19-Aug-2019 |
Yoshihiro Kaneko <ykaneko0929@gmail.com> |
arm64: dts: renesas: r8a774c0: Sort nodes Sort nodes. If node address is present * Sort by node address, grouping all nodes with the same compat string and sorting t
arm64: dts: renesas: r8a774c0: Sort nodes Sort nodes. If node address is present * Sort by node address, grouping all nodes with the same compat string and sorting the group alphabetically. Else * Sort alphabetically This should not have any run-time effect. Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
show more ...
|
#
a2fe2cd2 |
| 02-Aug-2019 |
Fabrizio Castro <fabrizio.castro@bp.renesas.com> |
arm64: dts: renesas: r8a774c0: Point LVDS0 to its companion LVDS1 Add the new renesas,companion property to the LVDS0 node to point to the companion LVDS encoder LVDS1. Based on simi
arm64: dts: renesas: r8a774c0: Point LVDS0 to its companion LVDS1 Add the new renesas,companion property to the LVDS0 node to point to the companion LVDS encoder LVDS1. Based on similar work from Laurent Pinchart for the r8a7799[05]. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
show more ...
|
Revision tags: v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10 |
|
#
e8efd2a8 |
| 14-Jun-2019 |
Fabrizio Castro <fabrizio.castro@bp.renesas.com> |
arm64: dts: renesas: r8a774c0: Add missing assigned-clocks for CAN[01] Define "assigned-clocks" and "assigned-clock-rates" properties for CAN[01] DT nodes, as required by the dt-bindings
arm64: dts: renesas: r8a774c0: Add missing assigned-clocks for CAN[01] Define "assigned-clocks" and "assigned-clock-rates" properties for CAN[01] DT nodes, as required by the dt-bindings. Fixes: 036bc85c1d06ef0a ("arm64: dts: renesas: r8a774c0: Add clkp2 clock to CAN nodes") Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
show more ...
|
Revision tags: v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5 |
|
#
7794bd7e |
| 23-May-2019 |
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> |
arm64: dts: renesas: Revise usb2_phy nodes and phys properties Since the commit 233da2c9ec22 ("dt-bindings: phy: rcar-gen3-phy-usb2: Revise #phy-cells property") revised the #phy-cells,
arm64: dts: renesas: Revise usb2_phy nodes and phys properties Since the commit 233da2c9ec22 ("dt-bindings: phy: rcar-gen3-phy-usb2: Revise #phy-cells property") revised the #phy-cells, this patch follows the updated document for R-Car Gen3 and RZ/A2 SoCs. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
show more ...
|
Revision tags: v5.1.4 |
|
#
11290c09 |
| 21-May-2019 |
Robin Murphy <robin.murphy@arm.com> |
arm64: dts: renesas: r8a774c0: Clean up CPU compatibles Apparently this DTS crossed over with commit 31af04cd60d3 ("arm64: dts: Remove inconsistent use of 'arm,armv8' compatible string")
arm64: dts: renesas: r8a774c0: Clean up CPU compatibles Apparently this DTS crossed over with commit 31af04cd60d3 ("arm64: dts: Remove inconsistent use of 'arm,armv8' compatible string") and missed out on the cleanup, so put it right. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
show more ...
|
#
2fe743c2 |
| 28-Apr-2019 |
Olof Johansson <olof@lixom.net> |
Merge tag 'renesas-arm64-dt-for-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt Renesas ARM64 Based SoC DT Updates for v5.2 * R-Car Gen3 SoC based
Merge tag 'renesas-arm64-dt-for-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt Renesas ARM64 Based SoC DT Updates for v5.2 * R-Car Gen3 SoC based Salvator-X and Salvator-XS boards - Add GPIO keys support - Sort rwdt node alphabetically * R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) SoCs - Use extended audio DMAC register * R-Car M3-W (r8a7796) SoC - Remove unneeded sound #address/size-cells * R-Car M3-N (r8a77965) SoC - Add SSIU support for audio * R-Car E3 (r8a77990) and RZ/G2E (r8a774c0) SoCs - Remove invalid compatible value for CSI40 * R-Car E3 (r8a77990) SoC - Cprrect SPDX license identifier style * R-Car E3 (r8a77990) based Ebisu board - Add BD9571 PMIC with DDR0 backup power config - Correct adv7482 hexadecimal register address - Add GPIO expander * R-Car E3 (r8a77990) based Ebisu and D3 (r8a77995) based Draak boards - Update bootargs to bring them into line with other R-Car Gen3 boards - Enable LVDS1 encoder * R-Car D3 (r8a77995) based Draak board - Correct EthernetAVB phy mode - Enable CAN0 and CAN1 * RZ/G2E (r8a774c0) SoC - Add CANFD support - Correct CPU node style * RZ/G2E (r8a774c0) and RZ/G2M (r8a774a1) SoCs - Add clkp2 clock to CAN nodes * RZ/G2E (r8a774c0) based EK874 board - Add LED, CAN and RTC support * tag 'renesas-arm64-dt-for-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (26 commits) arm64: dts: renesas: salvator-common: Add GPIO keys support arm64: dts: renesas: use extended audio dmac register arm64: dts: renesas: r8a77995: draak: Fix EthernetAVB phy mode to rgmii arm64: dts: renesas: salvator-common: Sort node label arm64: dts: renesas: Update Ebisu and Draak bootargs arm64: dts: renesas: r8a774c0: Add clkp2 clock to CAN nodes arm64: dts: renesas: r8a774c0: Add CANFD support arm64: dts: renesas: r8a774a1: Add clkp2 clock to CAN nodes arm64: dts: renesas: ebisu: Add PMIC DDR0 Backup Power config arm64: dts: renesas: r8a77990-ebisu: Add BD9571 PMIC arm64: dts: renesas: r8a77990: Remove invalid compatible value for CSI40 arm64: dts: renesas: r8a774c0: Remove invalid compatible value for CSI40 arm64: dts: renesas: r8a77995: draak: Enable CAN0, CAN1 arm64: dts: renesas: r8a774c0-cat874: Add RWDT support arm64: dts: renesas: ebisu: Enable VIN5 arm64: dts: renesas: r8a774c0-cat874: Add LEDs support arm64: dts: renesas: r8a774c0-cat874: add RTC support arm64: dts: renesas: cat875: Add CAN support arm64: dts: renesas: r8a774c0: Fix cpu nodes style arm64: dts: renesas: r8a77965: add SSIU support for sound ... Signed-off-by: Olof Johansson <olof@lixom.net>
show more ...
|
#
44cd9050 |
| 25-Mar-2019 |
Arnd Bergmann <arnd@arndb.de> |
Merge tag 'renesas-fixes-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/fixes Renesas ARM Based SoC Fixes for v5.1 R-Car Gen3 E3 (r8a77990) and RZ
Merge tag 'renesas-fixes-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/fixes Renesas ARM Based SoC Fixes for v5.1 R-Car Gen3 E3 (r8a77990) and RZ/G2E (r8a774c0) SoCs: * Correct SCIF5 DMA channels * tag 'renesas-fixes-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm64: dts: renesas: r8a774c0: Fix SCIF5 DMA channels arm64: dts: renesas: r8a77990: Fix SCIF5 DMA channels
show more ...
|
Revision tags: v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16 |
|
#
036bc85c |
| 16-Jan-2019 |
Fabrizio Castro <fabrizio.castro@bp.renesas.com> |
arm64: dts: renesas: r8a774c0: Add clkp2 clock to CAN nodes According to the latest information, clkp2 is available on RZ/G2. Modify CAN0 and CAN1 nodes accordingly. Signed-off-
arm64: dts: renesas: r8a774c0: Add clkp2 clock to CAN nodes According to the latest information, clkp2 is available on RZ/G2. Modify CAN0 and CAN1 nodes accordingly. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
show more ...
|
#
80bc6dbb |
| 01-Mar-2019 |
Fabrizio Castro <fabrizio.castro@bp.renesas.com> |
arm64: dts: renesas: r8a774c0: Add CANFD support The CANFD implementation on the RZ/G2E (a.k.a. r8a774c0) is identical to the one found on the r8a77990. Signed-off-by: Fabrizio
arm64: dts: renesas: r8a774c0: Add CANFD support The CANFD implementation on the RZ/G2E (a.k.a. r8a774c0) is identical to the one found on the r8a77990. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
show more ...
|
#
82ec0092 |
| 10-Mar-2019 |
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> |
arm64: dts: renesas: r8a774c0: Remove invalid compatible value for CSI40 The compatible value renesas,rcar-gen3-csi2 was used while prototyping the R-Car CSI-2 driver but was removed bef
arm64: dts: renesas: r8a774c0: Remove invalid compatible value for CSI40 The compatible value renesas,rcar-gen3-csi2 was used while prototyping the R-Car CSI-2 driver but was removed before the driver was merged. Fixes: e961ab42e034d469 ("arm64: dts: renesas: r8a774c0: Add VIN and CSI-2 device nodes") Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
show more ...
|
#
12ce412b |
| 15-Feb-2019 |
Fabrizio Castro <fabrizio.castro@bp.renesas.com> |
arm64: dts: renesas: r8a774c0: Fix cpu nodes style We usually leave a space between "=" and the value of device tree properties, but unfortunately that was overlooked for the "clocks
arm64: dts: renesas: r8a774c0: Fix cpu nodes style We usually leave a space between "=" and the value of device tree properties, but unfortunately that was overlooked for the "clocks" property of cpu@0 and cpu@1. This patch fixes the spacing with the "clocks" property of cpu@0 and cpu@1. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
show more ...
|
#
c21cd4ae |
| 21-Feb-2019 |
Geert Uytterhoeven <geert+renesas@glider.be> |
arm64: dts: renesas: r8a774c0: Fix SCIF5 DMA channels Correct the DMA channels for SCIF5 from 16..47 to 0..15, as was done for R-Car E3. Signed-off-by: Takeshi Kihara <takeshi.k
arm64: dts: renesas: r8a774c0: Fix SCIF5 DMA channels Correct the DMA channels for SCIF5 from 16..47 to 0..15, as was done for R-Car E3. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Fixes: 2660a6af690ebbb4 ("arm64: dts: renesas: r8a774c0: Add SCIF and HSCIF nodes") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
show more ...
|