|
Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80 |
|
| #
79ed18d9 |
| 22-Nov-2022 |
Thierry Reding <treding@nvidia.com> |
arm64: tegra: Sort nodes by unit-address, then alphabetically
Nodes in device tree should be sorted by unit-address, followed by nodes
without a unit-address, sorted alphabetically. Some exceptions
arm64: tegra: Sort nodes by unit-address, then alphabetically
Nodes in device tree should be sorted by unit-address, followed by nodes
without a unit-address, sorted alphabetically. Some exceptions are the
top-level aliases, chosen, firmware, memory and reserved-memory nodes,
which are expected to come first.
These rules apply recursively with some exceptions, such as pinmux nodes
or regulator nodes, which often follow more complicated ordering (often
by "importance").
While at it, change the name of some of the nodes to follow standard
naming conventions, which helps with the sorting order and reduces the
amount of warnings from the DT validation tools.
Signed-off-by: Thierry Reding <treding@nvidia.com>
show more ...
|
| #
29bcc1ea |
| 18-Nov-2022 |
Thierry Reding <treding@nvidia.com> |
arm64: tegra: Fix duplicate regulator on Jetson TX1
When the top-level regulators were renamed, the 1.2V camera regulator
accidentally ended up with the same DT node name as the 1.8V camera
regulato
arm64: tegra: Fix duplicate regulator on Jetson TX1
When the top-level regulators were renamed, the 1.2V camera regulator
accidentally ended up with the same DT node name as the 1.8V camera
regulator.
Fixes: 097e01c61015 ("arm64: tegra: Rename top-level regulators")
Signed-off-by: Thierry Reding <treding@nvidia.com>
show more ...
|
|
Revision tags: v6.0.9, v5.15.79, v6.0.8, v5.15.78 |
|
| #
efe499d8 |
| 04-Nov-2022 |
Thierry Reding <treding@nvidia.com> |
arm64: tegra: Fixup pinmux node names
Pinmux node names should have a pinmux- prefix and not use underscores.
Fix up some cases that didn't follow those rules.
Signed-off-by: Thierry Reding <tredin
arm64: tegra: Fixup pinmux node names
Pinmux node names should have a pinmux- prefix and not use underscores.
Fix up some cases that didn't follow those rules.
Signed-off-by: Thierry Reding <treding@nvidia.com>
show more ...
|
|
Revision tags: v6.0.7, v5.15.77 |
|
| #
b8f44643 |
| 03-Nov-2022 |
Thierry Reding <treding@nvidia.com> |
arm64: tegra: Add missing compatible string to Ethernet USB device
According to the DT schema in usb-device.yaml, each USB device node
needs a compatible string, so add one for the built-in USB Ethe
arm64: tegra: Add missing compatible string to Ethernet USB device
According to the DT schema in usb-device.yaml, each USB device node
needs a compatible string, so add one for the built-in USB Ethernet
device on Jetson TX1.
Signed-off-by: Thierry Reding <treding@nvidia.com>
show more ...
|
|
Revision tags: v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48 |
|
| #
012877d0 |
| 15-Jun-2022 |
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> |
arm64: tegra: Align gpio-keys node names with dtschema
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzy
arm64: tegra: Align gpio-keys node names with dtschema
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
show more ...
|
|
Revision tags: v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4 |
|
| #
31bc882c |
| 22-Mar-2019 |
Thierry Reding <treding@nvidia.com> |
arm64: tegra: jetson-tx1: Remove extra PLL power supplies for PCIe and XUSB
The XUSB pad controller handles the various PLL power supplies, so
remove any references to them from the PCIe and XUSB co
arm64: tegra: jetson-tx1: Remove extra PLL power supplies for PCIe and XUSB
The XUSB pad controller handles the various PLL power supplies, so
remove any references to them from the PCIe and XUSB controller device
tree nodes.
Signed-off-by: Thierry Reding <treding@nvidia.com>
show more ...
|
| #
1dcf00ae |
| 07-Dec-2021 |
Thierry Reding <treding@nvidia.com> |
arm64: tegra: Remove unsupported regulator properties
Remove the unsupported "regulator-disable-ramp-delay" properties which
ended up in various DTS files for some reason.
Signed-off-by: Thierry Re
arm64: tegra: Remove unsupported regulator properties
Remove the unsupported "regulator-disable-ramp-delay" properties which
ended up in various DTS files for some reason.
Signed-off-by: Thierry Reding <treding@nvidia.com>
show more ...
|
| #
097e01c6 |
| 06-Dec-2021 |
Thierry Reding <treding@nvidia.com> |
arm64: tegra: Rename top-level regulators
Regulators defined at the top level in device tree are no longer part of
a simple bus and therefore don't have a reg property. Nodes without a
reg property
arm64: tegra: Rename top-level regulators
Regulators defined at the top level in device tree are no longer part of
a simple bus and therefore don't have a reg property. Nodes without a
reg property shouldn't have a unit-address either, so drop the unit
address from the node names. To ensure nodes aren't duplicated (in which
case they would end up merged in the final DTB), append the name of the
regulator to the node name.
Signed-off-by: Thierry Reding <treding@nvidia.com>
show more ...
|
| #
b8928c2b |
| 30-Mar-2021 |
Thierry Reding <treding@nvidia.com> |
arm64: tegra: Consolidate audio card names
The current scheme for audio card names is suboptimal because it causes
the automatically generated names (for ID and driver) to be truncated,
which in tur
arm64: tegra: Consolidate audio card names
The current scheme for audio card names is suboptimal because it causes
the automatically generated names (for ID and driver) to be truncated,
which in turn can cause conflicts.
Introduce a new scheme which reuses the board model for the names and
appends the "HDA" and "APE" suffixes for the HDA and APE, respectively.
As a side-effect these suffixes end up being used as the ID of the SoC
sound cards which makes it easy for users to select them when using the
ALSA command-line utilities, for example.
As a separate measure, the driver name for the cards is now set by the
corresponding audio driver (either tegra-hda or tegra-ape), making it a
more useful identifier than the currently normalized card name.
Signed-off-by: Thierry Reding <treding@nvidia.com>
show more ...
|
| #
f24a2acc |
| 19-Nov-2020 |
JC Kuo <jckuo@nvidia.com> |
arm64: tegra: Fix USB_VBUS_EN0 regulator on Jetson TX1
USB host mode is broken on the OTG port of Jetson TX1 platform because
the USB_VBUS_EN0 regulator (regulator@11) is being overwritten by the
vd
arm64: tegra: Fix USB_VBUS_EN0 regulator on Jetson TX1
USB host mode is broken on the OTG port of Jetson TX1 platform because
the USB_VBUS_EN0 regulator (regulator@11) is being overwritten by the
vdd-cam-1v2 regulator. This commit rearranges USB_VBUS_EN0 to be
regulator@14.
Fixes: 257c8047be44 ("arm64: tegra: jetson-tx1: Add camera supplies")
Cc: stable@vger.kernel.org
Signed-off-by: JC Kuo <jckuo@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
show more ...
|
| #
257c8047 |
| 16-Jun-2020 |
Sowjanya Komatineni <skomatineni@nvidia.com> |
arm64: tegra: jetson-tx1: Add camera supplies
Jetson TX1 development board has a camera expansion connector which
has 2V8, 1V8 and 1V2 supplies to power up the camera sensor on the
supported camera
arm64: tegra: jetson-tx1: Add camera supplies
Jetson TX1 development board has a camera expansion connector which
has 2V8, 1V8 and 1V2 supplies to power up the camera sensor on the
supported camera modules.
Camera module designed as per Jetson TX1 camera expansion connector
may use these supplies for camera sensor avdd 2V8, digital core 1V8,
and digital interface 1V2 voltages.
These supplies are from fixed regulators on TX1 carrier board with
enable control signals from I2C GPIO expanders.
This patch adds these camera supplies to Jetson TX1 device tree to
allow using these when a camera module is used.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
show more ...
|
| #
1ca6bc89 |
| 12-Jun-2020 |
Thierry Reding <treding@nvidia.com> |
arm64: tegra: Update USB connector nodes
Use the preferred {id,vbus}-gpios over the {id,vbus}-gpio properties and
fix the ordering of compatible strings (most-specific ones should come
first).
Sign
arm64: tegra: Update USB connector nodes
Use the preferred {id,vbus}-gpios over the {id,vbus}-gpio properties and
fix the ordering of compatible strings (most-specific ones should come
first).
Signed-off-by: Thierry Reding <treding@nvidia.com>
show more ...
|
| #
7517248a |
| 12-Jun-2020 |
Thierry Reding <treding@nvidia.com> |
arm64: tegra: Remove simple regulators bus
The standard way to do this is to list out the regulators at the top-
level. Adopt the standard way to fix validation.
Signed-off-by: Thierry Reding <tred
arm64: tegra: Remove simple regulators bus
The standard way to do this is to list out the regulators at the top-
level. Adopt the standard way to fix validation.
Signed-off-by: Thierry Reding <treding@nvidia.com>
show more ...
|
| #
67bb17f6 |
| 11-Jun-2020 |
Thierry Reding <treding@nvidia.com> |
arm64: tegra: Rename sdhci nodes to mmc
The new json-schema based validation tools require SD/MMC controller
nodes to be named mmc. Rename all references to them.
Signed-off-by: Thierry Reding <tre
arm64: tegra: Rename sdhci nodes to mmc
The new json-schema based validation tools require SD/MMC controller
nodes to be named mmc. Rename all references to them.
Signed-off-by: Thierry Reding <treding@nvidia.com>
show more ...
|
| #
e8931a27 |
| 07-Feb-2020 |
Thierry Reding <treding@nvidia.com> |
arm64: tegra: Fixup I/O and PLL supply names for HDMI/DP
The I/O and PLL supplies used for HDMI/DP have alternative names. Use
the names that are given in the hardware documentation for consistency.
arm64: tegra: Fixup I/O and PLL supply names for HDMI/DP
The I/O and PLL supplies used for HDMI/DP have alternative names. Use
the names that are given in the hardware documentation for consistency.
Signed-off-by: Thierry Reding <treding@nvidia.com>
show more ...
|
| #
c4153885 |
| 04-May-2020 |
Sowjanya Komatineni <skomatineni@nvidia.com> |
arm64: tegra: Add Tegra VI CSI support in device tree
Tegra210 contains VI controller for video input capture from MIPI
CSI camera sensors and also supports built-in test pattern generator.
CSI por
arm64: tegra: Add Tegra VI CSI support in device tree
Tegra210 contains VI controller for video input capture from MIPI
CSI camera sensors and also supports built-in test pattern generator.
CSI ports can be one-to-one mapped to VI channels for capturing from
an external sensor or from built-in test pattern generator.
This patch adds support for VI and CSI and enables them in Tegra210
device tree.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
show more ...
|
| #
bcdf81cb |
| 22-Mar-2019 |
Thierry Reding <treding@nvidia.com> |
arm64: tegra: Add ethernet alias on Jetson TX1
Adding this alias for the Ethernet interface on Jetson TX1 allows the
bootloader to pass the MAC address to the Linux kernel.
Signed-off-by: Thierry R
arm64: tegra: Add ethernet alias on Jetson TX1
Adding this alias for the Ethernet interface on Jetson TX1 allows the
bootloader to pass the MAC address to the Linux kernel.
Signed-off-by: Thierry Reding <treding@nvidia.com>
show more ...
|
| #
6b3d8593 |
| 10-Feb-2020 |
Nagarjuna Kristam <nkristam@nvidia.com> |
arm64: tegra: Enable XUDC on Jetson TX1
Enable XUSB device mode driver for USB 2-0 slot on Jetson TX1.
Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
Signed-off-by: Thierry Reding <treding@
arm64: tegra: Enable XUDC on Jetson TX1
Enable XUSB device mode driver for USB 2-0 slot on Jetson TX1.
Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
show more ...
|
| #
dbf91ff0 |
| 10-Feb-2020 |
Nagarjuna Kristam <nkristam@nvidia.com> |
arm64: tegra: Update OTG port entries for Jetson TX1
Populate OTG vbus regulator and add usb-role-switch entry to USB 2-0
port and corresponding connector details.
Signed-off-by: Nagarjuna Kristam
arm64: tegra: Update OTG port entries for Jetson TX1
Populate OTG vbus regulator and add usb-role-switch entry to USB 2-0
port and corresponding connector details.
Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
show more ...
|
| #
1e5e929c |
| 25-Sep-2019 |
Jon Hunter <jonathanh@nvidia.com> |
arm64: tegra: Fix 'active-low' warning for Jetson TX1 regulator
Commit 34993594181d ("arm64: tegra: Enable HDMI on Jetson TX1")
added a regulator for HDMI on the Jetson TX1 platform. This regulator
arm64: tegra: Fix 'active-low' warning for Jetson TX1 regulator
Commit 34993594181d ("arm64: tegra: Enable HDMI on Jetson TX1")
added a regulator for HDMI on the Jetson TX1 platform. This regulator
has an active high enable, but the GPIO specifier for enabling the
regulator incorrectly defines it as active-low. This causes the
following warning to occur on boot ...
WARNING KERN regulator@10 GPIO handle specifies active low - ignored
The fixed-regulator binding does not use the active-low flag from the
gpio specifier and purely relies of the presence of the
'enable-active-high' property to determine if it is active high or low
(if this property is omitted). Fix this warning by setting the GPIO
to active-high in the GPIO specifier which aligns with the presense of
the 'enable-active-high' property.
Fixes: 34993594181d ("arm64: tegra: Enable HDMI on Jetson TX1")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
show more ...
|
|
Revision tags: v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17 |
|
| #
8f68dcd7 |
| 21-Jan-2019 |
Thierry Reding <treding@nvidia.com> |
arm64: tegra: jetson-tx1: Move PLL power supplies to XUSB pad controller
The XUSB pad controller is responsible for supplying power to the PLLs
used to drive the various USB, PCI and SATA pads. Move
arm64: tegra: jetson-tx1: Move PLL power supplies to XUSB pad controller
The XUSB pad controller is responsible for supplying power to the PLLs
used to drive the various USB, PCI and SATA pads. Move the PLL power
supplies from the PCIe and XUSB controllers to the XUSB pad controller
to make sure they are available when needed.
Signed-off-by: Thierry Reding <treding@nvidia.com>
show more ...
|
| #
11ce4308 |
| 20-Feb-2019 |
Sameer Pujar <spujar@nvidia.com> |
arm64: tegra: custom name for hda sound card
"nvidia,model" property is added to pass custom name for hda sound card.
This is parsed in hda driver and used for card name. This aligns with the
way wi
arm64: tegra: custom name for hda sound card
"nvidia,model" property is added to pass custom name for hda sound card.
This is parsed in hda driver and used for card name. This aligns with the
way with which sound cards are named in general.
This patch populates above for jetson-tx1, jetson-tx2 and jetson-xavier.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Jonathan Hunter <jonathanh@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
show more ...
|
|
Revision tags: v4.19.16, v4.19.15, v4.19.14 |
|
| #
a5e98b0b |
| 03-Jan-2019 |
Joseph Lo <josephl@nvidia.com> |
arm64: tegra: Add pinmux for PWM-based DFLL support on P2597
Add pinmux for PWM-based DFLL support.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-
arm64: tegra: Add pinmux for PWM-based DFLL support on P2597
Add pinmux for PWM-based DFLL support.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
show more ...
|
| #
be4f0dd3 |
| 25-Jan-2019 |
Thierry Reding <treding@nvidia.com> |
arm64: tegra: p2597: Sort nodes by unit-address
Some of these nodes got inserted in the wrong place. Restore ordering
by unit-address.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Revision tags: v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8 |
|
| #
caa7a8e3 |
| 06-Dec-2018 |
Thierry Reding <treding@nvidia.com> |
arm64: tegra: Enable HDA controller on Jetson TX1
The HDA controller can be used for audio playback over HDMI.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|