arm64: tegra: Correct Tegra132 I2C alias

commit 2633c58e1354d7de2c8e7be8bdb6f68a0a01bad7 upstream.

There is no such device as "as3722@40", because its name is "pmic". Use
phandles for aliases to f

arm64: tegra: Correct Tegra132 I2C alias

commit 2633c58e1354d7de2c8e7be8bdb6f68a0a01bad7 upstream.

There is no such device as "as3722@40", because its name is "pmic". Use
phandles for aliases to fix relying on full node path. This corrects
aliases for RTC devices and also fixes dtc W=1 warning:

tegra132-norrin.dts:12.3-36: Warning (alias_paths): /aliases:rtc0: aliases property is not a valid node (/i2c@7000d000/as3722@40)

Fixes: 0f279ebdf3ce ("arm64: tegra: Add NVIDIA Tegra132 Norrin support")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

arm64: tegra: Correct Tegra132 I2C alias

commit 2633c58e1354d7de2c8e7be8bdb6f68a0a01bad7 upstream.

There is no such device as "as3722@40", because its name is "pmic". Use
phandles for aliases to f

arm64: tegra: Correct Tegra132 I2C alias

commit 2633c58e1354d7de2c8e7be8bdb6f68a0a01bad7 upstream.

There is no such device as "as3722@40", because its name is "pmic". Use
phandles for aliases to fix relying on full node path. This corrects
aliases for RTC devices and also fixes dtc W=1 warning:

tegra132-norrin.dts:12.3-36: Warning (alias_paths): /aliases:rtc0: aliases property is not a valid node (/i2c@7000d000/as3722@40)

Fixes: 0f279ebdf3ce ("arm64: tegra: Add NVIDIA Tegra132 Norrin support")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

arm64: tegra: Correct Tegra132 I2C alias

commit 2633c58e1354d7de2c8e7be8bdb6f68a0a01bad7 upstream.

There is no such device as "as3722@40", because its name is "pmic". Use
phandles for aliases to f

arm64: tegra: Correct Tegra132 I2C alias

commit 2633c58e1354d7de2c8e7be8bdb6f68a0a01bad7 upstream.

There is no such device as "as3722@40", because its name is "pmic". Use
phandles for aliases to fix relying on full node path. This corrects
aliases for RTC devices and also fixes dtc W=1 warning:

tegra132-norrin.dts:12.3-36: Warning (alias_paths): /aliases:rtc0: aliases property is not a valid node (/i2c@7000d000/as3722@40)

Fixes: 0f279ebdf3ce ("arm64: tegra: Add NVIDIA Tegra132 Norrin support")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

arm64: tegra: Correct Tegra132 I2C alias

commit 2633c58e1354d7de2c8e7be8bdb6f68a0a01bad7 upstream.

There is no such device as "as3722@40", because its name is "pmic". Use
phandles for aliases to f

arm64: tegra: Correct Tegra132 I2C alias

commit 2633c58e1354d7de2c8e7be8bdb6f68a0a01bad7 upstream.

There is no such device as "as3722@40", because its name is "pmic". Use
phandles for aliases to fix relying on full node path. This corrects
aliases for RTC devices and also fixes dtc W=1 warning:

tegra132-norrin.dts:12.3-36: Warning (alias_paths): /aliases:rtc0: aliases property is not a valid node (/i2c@7000d000/as3722@40)

Fixes: 0f279ebdf3ce ("arm64: tegra: Add NVIDIA Tegra132 Norrin support")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

arm64: tegra: Correct Tegra132 I2C alias

commit 2633c58e1354d7de2c8e7be8bdb6f68a0a01bad7 upstream.

There is no such device as "as3722@40", because its name is "pmic". Use
phandles for aliases to f

arm64: tegra: Correct Tegra132 I2C alias

commit 2633c58e1354d7de2c8e7be8bdb6f68a0a01bad7 upstream.

There is no such device as "as3722@40", because its name is "pmic". Use
phandles for aliases to fix relying on full node path. This corrects
aliases for RTC devices and also fixes dtc W=1 warning:

tegra132-norrin.dts:12.3-36: Warning (alias_paths): /aliases:rtc0: aliases property is not a valid node (/i2c@7000d000/as3722@40)

Fixes: 0f279ebdf3ce ("arm64: tegra: Add NVIDIA Tegra132 Norrin support")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

arm64: tegra: Remove dmas and dma-names for debug UART

The debug UART doesn't support DMA and the DT bindings prohibit the use
of the dmas and dma-names properties for it, so remove them.

Signed-of

arm64: tegra: Remove dmas and dma-names for debug UART

The debug UART doesn't support DMA and the DT bindings prohibit the use
of the dmas and dma-names properties for it, so remove them.

Signed-off-by: Thierry Reding <treding@nvidia.com>

show more ...

arm64: tegra: Sort nodes by unit-address, then alphabetically

Nodes in device tree should be sorted by unit-address, followed by nodes
without a unit-address, sorted alphabetically. Some exceptions

arm64: tegra: Sort nodes by unit-address, then alphabetically

Nodes in device tree should be sorted by unit-address, followed by nodes
without a unit-address, sorted alphabetically. Some exceptions are the
top-level aliases, chosen, firmware, memory and reserved-memory nodes,
which are expected to come first.

These rules apply recursively with some exceptions, such as pinmux nodes
or regulator nodes, which often follow more complicated ordering (often
by "importance").

While at it, change the name of some of the nodes to follow standard
naming conventions, which helps with the sorting order and reduces the
amount of warnings from the DT validation tools.

Signed-off-by: Thierry Reding <treding@nvidia.com>

show more ...

arm64: tegra: Fixup pinmux node names

Pinmux node names should have a pinmux- prefix and not use underscores.
Fix up some cases that didn't follow those rules.

Signed-off-by: Thierry Reding <tredin

arm64: tegra: Fixup pinmux node names

Pinmux node names should have a pinmux- prefix and not use underscores.
Fix up some cases that didn't follow those rules.

Signed-off-by: Thierry Reding <treding@nvidia.com>

show more ...

arm64: tegra: Align gpio-keys node names with dtschema

The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).

Signed-off-by: Krzysztof Kozlowski <krzy

arm64: tegra: Align gpio-keys node names with dtschema

The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>

show more ...

arm64: tegra: Remove unsupported properties on Norrin

The Tegra PMC device tree bindings don't support the "#wake-cells" and
"nvidia,reset-gpio" properties, so remove them.

Signed-off-by: Thierry R

arm64: tegra: Remove unsupported properties on Norrin

The Tegra PMC device tree bindings don't support the "#wake-cells" and
"nvidia,reset-gpio" properties, so remove them.

Signed-off-by: Thierry Reding <treding@nvidia.com>

show more ...

arm64: tegra: Fix unit-addresses on Norrin

The AS3722 pinmux device tree node doesn't have a "reg" property and
therefore must not have a unit-address, so drop it.

While at it, add missing unit-add

arm64: tegra: Fix unit-addresses on Norrin

The AS3722 pinmux device tree node doesn't have a "reg" property and
therefore must not have a unit-address, so drop it.

While at it, add missing unit-addresses for the charger and smart
battery IC's on the ChromeOS embedded controller's I2C tunnel bus.

Signed-off-by: Thierry Reding <treding@nvidia.com>

show more ...

arm64: tegra: Rename top-level regulators

Regulators defined at the top level in device tree are no longer part of
a simple bus and therefore don't have a reg property. Nodes without a
reg property

arm64: tegra: Rename top-level regulators

Regulators defined at the top level in device tree are no longer part of
a simple bus and therefore don't have a reg property. Nodes without a
reg property shouldn't have a unit-address either, so drop the unit
address from the node names. To ensure nodes aren't duplicated (in which
case they would end up merged in the final DTB), append the name of the
regulator to the node name.

Signed-off-by: Thierry Reding <treding@nvidia.com>

show more ...

arm64: tegra: Rename top-level clocks

Clocks defined at the top level in device tree are no longer part of a
simple bus and therefore don't have a reg property. Nodes without a reg
property shouldn'

arm64: tegra: Rename top-level clocks

Clocks defined at the top level in device tree are no longer part of a
simple bus and therefore don't have a reg property. Nodes without a reg
property shouldn't have a unit-address either, so drop the unit address
from the node names. To ensure nodes aren't duplicated (in which case
they would end up merged in the final DTB), append the name of the clock
to the node name.

Signed-off-by: Thierry Reding <treding@nvidia.com>

show more ...

arm64: tegra: Remove unused backlight-boot-off property

The backlight-boot-off property was proposed as a patch, but ended not
being accepted since different solution was already in the place:

arm64: tegra: Remove unused backlight-boot-off property

The backlight-boot-off property was proposed as a patch, but ended not
being accepted since different solution was already in the place:

https://patchwork.kernel.org/project/linux-arm-kernel/patch/1406806970-12561-1-git-send-email-thierry.reding@gmail.com/#21327479

Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Thierry Reding <treding@nvidia.com>

show more ...

arm64: tegra: Add HDMI supplies on Norrin

The SOR controller needs the AVDD I/O and VDD HDMI PLL supplies in order
to operate correctly. Make sure to specify them for the Norrin board.

Signed-off-b

arm64: tegra: Add HDMI supplies on Norrin

The SOR controller needs the AVDD I/O and VDD HDMI PLL supplies in order
to operate correctly. Make sure to specify them for the Norrin board.

Signed-off-by: Thierry Reding <treding@nvidia.com>

show more ...

arm64: tegra: norrin: Add missing panel power supply

This panel supply is always on, so this does happen to work by accident.
Make sure to properly hook up the power supply to model the dependency
c

arm64: tegra: norrin: Add missing panel power supply

This panel supply is always on, so this does happen to work by accident.
Make sure to properly hook up the power supply to model the dependency
correctly and so that the panel continues to operate properly even if
the supply is not always on.

Signed-off-by: Thierry Reding <treding@nvidia.com>

show more ...

arm64: tegra: Remove simple regulators bus

The standard way to do this is to list out the regulators at the top-
level. Adopt the standard way to fix validation.

Signed-off-by: Thierry Reding <tred

arm64: tegra: Remove simple regulators bus

The standard way to do this is to list out the regulators at the top-
level. Adopt the standard way to fix validation.

Signed-off-by: Thierry Reding <treding@nvidia.com>

show more ...

arm64: tegra: Remove simple clocks bus

The standard way to do this is to list out the clocks at the top-level.
Adopt the standard way to fix validation.

Signed-off-by: Thierry Reding <treding@nvidi

arm64: tegra: Remove simple clocks bus

The standard way to do this is to list out the clocks at the top-level.
Adopt the standard way to fix validation.

Signed-off-by: Thierry Reding <treding@nvidia.com>

show more ...

arm64: tegra: Remove undocumented battery-name property

battery-name is not a documented property, so drop it to avoid
validation failures.

Signed-off-by: Thierry Reding <treding@nvidia.com>

arm64: tegra: Enable XUSB on Norrin

Use the XUSB controller instead of the legacy EHCI controller to enable
USB 3.0 support.

Signed-off-by: Thierry Reding <treding@nvidia.com>

arm64: tegra: Rename sdhci nodes to mmc

The new json-schema based validation tools require SD/MMC controller
nodes to be named mmc. Rename all references to them.

Signed-off-by: Thierry Reding <tre

arm64: tegra: Rename sdhci nodes to mmc

The new json-schema based validation tools require SD/MMC controller
nodes to be named mmc. Rename all references to them.

Signed-off-by: Thierry Reding <treding@nvidia.com>

show more ...

arm64: tegra: Add unit-address to memory node

The memory node requires a unit-address. For some boards the bootloader,
which is usually locked down, uses a hard-coded name for the memory node
withou

arm64: tegra: Add unit-address to memory node

The memory node requires a unit-address. For some boards the bootloader,
which is usually locked down, uses a hard-coded name for the memory node
without a unit-address, so we can't fix it on those boards.

Signed-off-by: Thierry Reding <treding@nvidia.com>

show more ...

arm64: tegra: Kill off "simple-panel" compatibles

"simple-panel" is a Linux driver and has never been an accepted upstream
compatible string, so remove it.

Cc: Thierry Reding <thierry.reding@gmail.

arm64: tegra: Kill off "simple-panel" compatibles

"simple-panel" is a Linux driver and has never been an accepted upstream
compatible string, so remove it.

Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>

show more ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

arm64: tegra: Add stdout-path for various boards

For Tegra boards, the device-tree alias serial0 is used for the console
and so add the stdout-path information so that the console no longer
needs to

arm64: tegra: Add stdout-path for various boards

For Tegra boards, the device-tree alias serial0 is used for the console
and so add the stdout-path information so that the console no longer
needs to be passed via the kernel boot parameters.

For tegra132-norrin the alias serial0 is not defined and so add this.

This has been tested on tegra132-norrin and tegra210-p2371-0000.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

show more ...