Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31 |
|
#
7afe7b59 |
| 28-May-2023 |
Frank Wunderlich <frank-w@public-files.de> |
arm64: dts: mt7986: use size of reserved partition for bl2
To store uncompressed bl2 more space is required than partition is actually defined.
There is currently no known usage of this reserved pa
arm64: dts: mt7986: use size of reserved partition for bl2
To store uncompressed bl2 more space is required than partition is actually defined.
There is currently no known usage of this reserved partition. Openwrt uses same partition layout.
We added same change to u-boot with commit d7bb1099 [1].
[1] https://source.denx.de/u-boot/u-boot/-/commit/d7bb109900c1ca754a0198b9afb50e3161ffc21e
Cc: stable@vger.kernel.org Fixes: 8e01fb15b815 ("arm64: dts: mt7986: add Bananapi R3") Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Daniel Golle <daniel@makrotopia.org> Link: https://lore.kernel.org/r/20230528113343.7649-1-linux@fw-web.de Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
show more ...
|
Revision tags: v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4 |
|
#
8e01fb15 |
| 06-Jan-2023 |
Frank Wunderlich <frank-w@public-files.de> |
arm64: dts: mt7986: add Bananapi R3
Add support for Bananapi R3 SBC.
- SD/eMMC support (switching first 4 bits of data-bus with sw6/D) - SPI-NAND/NOR support (switched CS by sw5/C) - all rj45 ports
arm64: dts: mt7986: add Bananapi R3
Add support for Bananapi R3 SBC.
- SD/eMMC support (switching first 4 bits of data-bus with sw6/D) - SPI-NAND/NOR support (switched CS by sw5/C) - all rj45 ports and both SFP working (eth1/lan4) - all USB-Ports + SIM-Slot tested - i2c and all uarts tested - wifi tested (with eeprom calibration data)
The device can boot from all 4 storage options. Both, SPI and MMC, can be switched using hardware switches on the board, see https://wiki.banana-pi.org/Banana_Pi_BPI-R3#Jumper_setting
Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Link: https://lore.kernel.org/r/20230106152845.88717-6-linux@fw-web.de Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
show more ...
|