Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41 |
|
#
ff5d694b |
| 16-May-2022 |
Robert Marko <robert.marko@sartura.hr> |
arm64: dts: marvell: split Methode uDPU DTS
Split the Methode uDPU DTS into a common DTSI as preparation for adding support for Methode eDPU which is based on the uDPU to avoid duplication.
Signed-
arm64: dts: marvell: split Methode uDPU DTS
Split the Methode uDPU DTS into a common DTSI as preparation for adding support for Methode eDPU which is based on the uDPU to avoid duplication.
Signed-off-by: Robert Marko <robert.marko@sartura.hr> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
show more ...
|
#
565a6cf0 |
| 16-May-2022 |
Robert Marko <robert.marko@sartura.hr> |
arm64: dts: marvell: rename temp sensor nodes
Rename the temperature sensor nodes to use "temp-sensor" which matches their device class instead of IC specific naming.
Remove the status = "okay" whi
arm64: dts: marvell: rename temp sensor nodes
Rename the temperature sensor nodes to use "temp-sensor" which matches their device class instead of IC specific naming.
Remove the status = "okay" which is not required as its default anyway.
Signed-off-by: Robert Marko <robert.marko@sartura.hr> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
show more ...
|
#
c269d420 |
| 16-May-2022 |
Robert Marko <robert.marko@sartura.hr> |
arm64: dts: marvell: uDPU: remove LED node pinctrl-names
Using pinctrl-names requires the appropriate pinctrl-0 property, otherwise it is not utilized at all.
Since its not required, just remove it
arm64: dts: marvell: uDPU: remove LED node pinctrl-names
Using pinctrl-names requires the appropriate pinctrl-0 property, otherwise it is not utilized at all.
Since its not required, just remove it.
Signed-off-by: Robert Marko <robert.marko@sartura.hr> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
show more ...
|
#
f035bbde |
| 16-May-2022 |
Robert Marko <robert.marko@sartura.hr> |
arm64: dts: marvell: uDPU: align LED-s with bindings
According to bindings they LED-s should be prefixed with "led" in this use case, so fix accordingly.
Signed-off-by: Robert Marko <robert.marko@s
arm64: dts: marvell: uDPU: align LED-s with bindings
According to bindings they LED-s should be prefixed with "led" in this use case, so fix accordingly.
Signed-off-by: Robert Marko <robert.marko@sartura.hr> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
show more ...
|
#
380c9466 |
| 16-May-2022 |
Robert Marko <robert.marko@sartura.hr> |
arm64: dts: marvell: uDPU: add missing SoC compatible
According to the bindings, all boards using Armada 37xx SoC-s must have "marvell,armada3710" compatible while 3720 based ones should also have "
arm64: dts: marvell: uDPU: add missing SoC compatible
According to the bindings, all boards using Armada 37xx SoC-s must have "marvell,armada3710" compatible while 3720 based ones should also have "marvell,armada3720" before it.
Signed-off-by: Robert Marko <robert.marko@sartura.hr> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
show more ...
|
#
4ce223e5 |
| 07-Jul-2022 |
Ioana Ciornei <ioana.ciornei@nxp.com> |
arch: arm64: dts: marvell: rename the sfp GPIO properties
Rename the GPIO related sfp properties to include the preffered -gpios suffix. Also, with this change the dtb_check will no longer complain
arch: arm64: dts: marvell: rename the sfp GPIO properties
Rename the GPIO related sfp properties to include the preffered -gpios suffix. Also, with this change the dtb_check will no longer complain when trying to verify the DTS against the sff,sfp.yaml binding.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
show more ...
|
Revision tags: v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31 |
|
#
e4fde76f |
| 22-Mar-2022 |
Robert Marko <robert.marko@sartura.hr> |
arm64: dts: uDPU: correct temperature sensors
uDPU has a pair of NCT375 temperature sensors, which are TMP75C compatible as far as the driver is concerned.
The current LM75 compatible worked as all
arm64: dts: uDPU: correct temperature sensors
uDPU has a pair of NCT375 temperature sensors, which are TMP75C compatible as far as the driver is concerned.
The current LM75 compatible worked as all of the LM75 compatible sensors are backwards compatible with the original part, but it meant that lower resolution and incorrect sample rate was being used.
The "lm75" compatible has been deprecated anyway and is meant as fallback in order to keep older DTS-es working.
Signed-off-by: Robert Marko <robert.marko@sartura.hr> Reviewed-by: Pali Rohár <pali@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
show more ...
|
#
5e9b59bd |
| 22-Mar-2022 |
Robert Marko <robert.marko@sartura.hr> |
arm64: dts: uDPU: update partition table
Partition currently called "uboot" does not only contain U-boot, but rather it contains TF-A, U-boot and U-boot environment.
So, to avoid accidentally delet
arm64: dts: uDPU: update partition table
Partition currently called "uboot" does not only contain U-boot, but rather it contains TF-A, U-boot and U-boot environment.
So, to avoid accidentally deleting the U-boot environment which is located at 0x180000 split the partition.
"uboot" is not the correct name as you can't boot these boards with U-boot only, TF-A must be present as well, so rename the "uboot" partition to "firmware".
While we are here, describe the NOR node as "spi-flash@0" instead of "m25p80@0" which is the old SPI-NOR driver name.
This won't break booting for existing devices as the SoC-s BootROM is not partition aware at all, it will simply try booting from 0x0 of the boot device that is set by bootstrap pins.
This will however prevent accidental or automated flashing of just U-boot to the partition.
Signed-off-by: Robert Marko <robert.marko@sartura.hr> Reviewed-by: Pali Rohár <pali@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
show more ...
|
#
2f00bb4a |
| 07-Apr-2022 |
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> |
arm64: dts: marvell: align SPI NOR node name with dtschema
The node names should be generic and SPI NOR dtschema expects "flash".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
arm64: dts: marvell: align SPI NOR node name with dtschema
The node names should be generic and SPI NOR dtschema expects "flash".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220407143234.295426-2-krzysztof.kozlowski@linaro.org
show more ...
|
Revision tags: v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40 |
|
#
11b2af36 |
| 06-May-2020 |
Russell King <rmk+kernel@armlinux.org.uk> |
arm64: dts: add uDPU i2c bus recovery
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
Revision tags: v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12 |
|
#
cd592187 |
| 19-Nov-2019 |
Russell King <rmk+kernel@armlinux.org.uk> |
arm64: dts: uDPU: SFP cages support 3W modules
The SFP cages are designed to support up to 3W modules, such as G.hn, G.fast and MoCA modules. Although there is no way for such modules to declare to
arm64: dts: uDPU: SFP cages support 3W modules
The SFP cages are designed to support up to 3W modules, such as G.hn, G.fast and MoCA modules. Although there is no way for such modules to declare to software that they consume 3W, we document in DT that this is the designed power level for these cages.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
show more ...
|
#
fe3ec631 |
| 16-Nov-2019 |
Russell King <rmk+kernel@armlinux.org.uk> |
arm64: dts: uDPU: remove i2c-fast-mode
The I2C bus violates the timing specifications when run in fast mode on the uDPU, so switch to 100kHz mode.
Signed-off-by: Russell King <rmk+kernel@armlinux.o
arm64: dts: uDPU: remove i2c-fast-mode
The I2C bus violates the timing specifications when run in fast mode on the uDPU, so switch to 100kHz mode.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
show more ...
|
#
1eebac02 |
| 16-Nov-2019 |
Russell King <rmk+kernel@armlinux.org.uk> |
arm64: dts: uDPU: fix broken ethernet
The uDPU uses both ethernet controllers, which ties up COMPHY 0 for eth1 and COMPHY 1 for eth0, with no USB3 comphy. The addition of COMPHY support made the ke
arm64: dts: uDPU: fix broken ethernet
The uDPU uses both ethernet controllers, which ties up COMPHY 0 for eth1 and COMPHY 1 for eth0, with no USB3 comphy. The addition of COMPHY support made the kernel override the setup by the boot loader breaking this platform by assuming that COMPHY 0 was always used for USB3. Delete the USB3 COMPHY definition at platform level, and add phy specifications for the ethernet channels.
Fixes: bd3d25b07342 ("arm64: dts: marvell: armada-37xx: link USB hosts with their PHYs") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
show more ...
|
Revision tags: v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18 |
|
#
0d45062c |
| 25-Jan-2019 |
Vladimir Vid <vladimir.vid@sartura.hr> |
arm64: dts: marvell: Add device tree for uDPU board
This adds initial support for micro-DPU (uDPU) board which is based on Armada-3720 SoC. micro-DPU is the single-port FTTdp distribution point uni
arm64: dts: marvell: Add device tree for uDPU board
This adds initial support for micro-DPU (uDPU) board which is based on Armada-3720 SoC. micro-DPU is the single-port FTTdp distribution point unit made by Methode Electronics which offers complete modularity with replaceable SFP modules both for uplink and downlink (G.hn over twisted-pair, G.hn over coax, 1G and 2.5G Ethernet over Cat-5e cable).
On-board features: - 512 MiB DDR3 - 2 x 2.5G SFP via HSGMII SERDES interface to the A3720 SoC - USB 2.0 Type-C connector - 4GB eMMC - ETSI TS 101548 reverse powering via twisted pair (RJ45) or coax (F Type)
Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Luis Torres <luis.torres@methode.com> Cc: Scott Roberts <scott.roberts@telus.com> Cc: Paul Arola <paul.arola@telus.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Gregory Clement <gregory.clement@bootlin.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
show more ...
|
Revision tags: v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40 |
|
#
11b2af36 |
| 06-May-2020 |
Russell King <rmk+kernel@armlinux.org.uk> |
arm64: dts: add uDPU i2c bus recovery Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.cleme
arm64: dts: add uDPU i2c bus recovery Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
show more ...
|
Revision tags: v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12 |
|
#
cd592187 |
| 19-Nov-2019 |
Russell King <rmk+kernel@armlinux.org.uk> |
arm64: dts: uDPU: SFP cages support 3W modules The SFP cages are designed to support up to 3W modules, such as G.hn, G.fast and MoCA modules. Although there is no way for such modules to
arm64: dts: uDPU: SFP cages support 3W modules The SFP cages are designed to support up to 3W modules, such as G.hn, G.fast and MoCA modules. Although there is no way for such modules to declare to software that they consume 3W, we document in DT that this is the designed power level for these cages. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
show more ...
|
#
fe3ec631 |
| 16-Nov-2019 |
Russell King <rmk+kernel@armlinux.org.uk> |
arm64: dts: uDPU: remove i2c-fast-mode The I2C bus violates the timing specifications when run in fast mode on the uDPU, so switch to 100kHz mode. Signed-off-by: Russell King <r
arm64: dts: uDPU: remove i2c-fast-mode The I2C bus violates the timing specifications when run in fast mode on the uDPU, so switch to 100kHz mode. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
show more ...
|
#
1eebac02 |
| 16-Nov-2019 |
Russell King <rmk+kernel@armlinux.org.uk> |
arm64: dts: uDPU: fix broken ethernet The uDPU uses both ethernet controllers, which ties up COMPHY 0 for eth1 and COMPHY 1 for eth0, with no USB3 comphy. The addition of COMPHY sup
arm64: dts: uDPU: fix broken ethernet The uDPU uses both ethernet controllers, which ties up COMPHY 0 for eth1 and COMPHY 1 for eth0, with no USB3 comphy. The addition of COMPHY support made the kernel override the setup by the boot loader breaking this platform by assuming that COMPHY 0 was always used for USB3. Delete the USB3 COMPHY definition at platform level, and add phy specifications for the ethernet channels. Fixes: bd3d25b07342 ("arm64: dts: marvell: armada-37xx: link USB hosts with their PHYs") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
show more ...
|
Revision tags: v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18 |
|
#
0d45062c |
| 25-Jan-2019 |
Vladimir Vid <vladimir.vid@sartura.hr> |
arm64: dts: marvell: Add device tree for uDPU board This adds initial support for micro-DPU (uDPU) board which is based on Armada-3720 SoC. micro-DPU is the single-port FTTdp distributi
arm64: dts: marvell: Add device tree for uDPU board This adds initial support for micro-DPU (uDPU) board which is based on Armada-3720 SoC. micro-DPU is the single-port FTTdp distribution point unit made by Methode Electronics which offers complete modularity with replaceable SFP modules both for uplink and downlink (G.hn over twisted-pair, G.hn over coax, 1G and 2.5G Ethernet over Cat-5e cable). On-board features: - 512 MiB DDR3 - 2 x 2.5G SFP via HSGMII SERDES interface to the A3720 SoC - USB 2.0 Type-C connector - 4GB eMMC - ETSI TS 101548 reverse powering via twisted pair (RJ45) or coax (F Type) Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Luis Torres <luis.torres@methode.com> Cc: Scott Roberts <scott.roberts@telus.com> Cc: Paul Arola <paul.arola@telus.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Gregory Clement <gregory.clement@bootlin.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
show more ...
|