#
3ffeb953 |
| 21-Apr-2020 |
Jerome Brunet <jbrunet@baylibre.com> |
arm64: dts: meson: p230-q200: add initial audio playback support Add basic audio support on the p230/q200 reference design. This initial support is limited to HDMI i2s and SPDIF (LPCM).
arm64: dts: meson: p230-q200: add initial audio playback support Add basic audio support on the p230/q200 reference design. This initial support is limited to HDMI i2s and SPDIF (LPCM). Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Christian Hewitt <christianshewitt@gmail.com> Link: https://lore.kernel.org/r/20200421163935.775935-4-jbrunet@baylibre.com
show more ...
|
Revision tags: v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6 |
|
#
2f9139c2 |
| 26-Mar-2020 |
Martin Blumenstingl <martin.blumenstingl@googlemail.com> |
arm64: dts: amlogic: use the new USB control driver for GXL and GXM Add the correcly architectured USB Glue node and adapt all the Amlogic GXL and GXM board to the new organization.
arm64: dts: amlogic: use the new USB control driver for GXL and GXM Add the correcly architectured USB Glue node and adapt all the Amlogic GXL and GXM board to the new organization. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200326134507.4808-11-narmstrong@baylibre.com
show more ...
|
Revision tags: v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12 |
|
#
86b8eaa2 |
| 29-Aug-2019 |
Neil Armstrong <narmstrong@baylibre.com> |
arm64: dts: meson-gx-p23x-q20x: add keep-power-in-suspend property in SDIO node The WiFi firmware requires that the power is kept enabled while in suspend mode. Add the keep-power-in-sus
arm64: dts: meson-gx-p23x-q20x: add keep-power-in-suspend property in SDIO node The WiFi firmware requires that the power is kept enabled while in suspend mode. Add the keep-power-in-suspend property in the SDIO node to specify that the power must be kept when entering in a system wide suspend state. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
Revision tags: v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9 |
|
#
adc52bf7 |
| 18-Apr-2019 |
Jerome Brunet <jbrunet@baylibre.com> |
arm64: dts: meson: fix mmc v2 chips max frequencies According the datasheets, emmc v2 chips (gxbb and gxl) don't support more that 100Mhz in UHS-1 SD modes and HS in SDIO. Align
arm64: dts: meson: fix mmc v2 chips max frequencies According the datasheets, emmc v2 chips (gxbb and gxl) don't support more that 100Mhz in UHS-1 SD modes and HS in SDIO. Align the max-frequency to 100MHz for UHS-1 and 50MHz for HS Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
Revision tags: v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16 |
|
#
f29200c8 |
| 14-Jan-2019 |
Loys Ollivier <lollivier@baylibre.com> |
arm64: dts: meson: Fix mmc cd-gpios polarity Commit 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree") changed the behavior of "cd-inverted" to follow the device tree bind
arm64: dts: meson: Fix mmc cd-gpios polarity Commit 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree") changed the behavior of "cd-inverted" to follow the device tree bindings specification: According to SDHCI standard, CD lines are specified as "active low". Using the "cd-inverted" property means that the CD line is "active high". Fix the SD card description for meson by setting the cd-gpios as "active low", according to the boards specifications, and dropping the "cd-inverted" property. Fixes: 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree") Signed-off-by: Loys Ollivier <lollivier@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
Revision tags: v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18 |
|
#
e1f2163d |
| 08-Nov-2018 |
Neil Armstrong <narmstrong@baylibre.com> |
arm64: dts: meson-gx: Add hdmi_5v regulator as hdmi tx supply The hdmi_5v regulator must be enabled to provide power to the physical HDMI PHY and enables the HDMI 5V presence loopback fo
arm64: dts: meson-gx: Add hdmi_5v regulator as hdmi tx supply The hdmi_5v regulator must be enabled to provide power to the physical HDMI PHY and enables the HDMI 5V presence loopback for the monitor. Fixes: b409f625a6d5 ("ARM64: dts: meson-gx: Add HDMI_5V regulator on selected boards") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
Revision tags: v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3 |
|
#
1b2b1e75 |
| 23-Jun-2018 |
Martin Blumenstingl <martin.blumenstingl@googlemail.com> |
ARM64: dts: meson-gx-p23x-q20x: move the wifi node to each board's .dts meson-gx-p23x-q20x.dtsi is currently used by five boards: - Amlogic P230 and P231 (which should be identical, apar
ARM64: dts: meson-gx-p23x-q20x: move the wifi node to each board's .dts meson-gx-p23x-q20x.dtsi is currently used by five boards: - Amlogic P230 and P231 (which should be identical, apart from the external RGMII PHY on P230 whereas P231 can only use the internal PHY) - Amlogic Q200 (identical to P230 but with an S912 GXM SoC instead of a GXL S905D SoC) and Q201 (identical to P231 but with an S912 GXM SoC instead of a GXL S905D SoC) - NEXBOX A1 (based on the S912 GXM SoC) The Amlogic P230 board uses a Broadcom BCM4356 SDIO wifi chip. Since the other Amlogic reference design boards are very similar it's safe to assume that these also use a Broadcom based SDIO wifi chip (which is also how it was configured in meson-gx-p23x-q20x.dtsi). However, NEXBOX A1 comes with a "longsys LTM8830" SDIO wifi module, which is based on the "Qualcomm Atheros QCA9377-3(QCA1023-0)" chipset. Thus move the wifi node from meson-gx-p23x-q20x.dtsi to each of the four Amlogic reference board's .dts files. There are no devicetree bindings for the QCA9377 SDIO wifi module yet, so nothing is added to meson-gxm-nexbox-a1.dts. Fixes: f51b454549b812 ("ARM64: dts: meson-gxm: Add support for the Nexbox A1") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
#
41ed2e0d |
| 23-Jun-2018 |
Martin Blumenstingl <martin.blumenstingl@googlemail.com> |
ARM64: dts: meson: enable the saradc node in meson-gx-p23x-q20x.dtsi meson-gxl-s905d-p230.dts and meson-gxm-q200.dts enable the saradc node (and configure it's vref-supply "VDDIO_AO18")
ARM64: dts: meson: enable the saradc node in meson-gx-p23x-q20x.dtsi meson-gxl-s905d-p230.dts and meson-gxm-q200.dts enable the saradc node (and configure it's vref-supply "VDDIO_AO18") in their corresponding .dts file. Move both (the saradc node as well as the VDDIO_AO18 regulator) to remove some duplicate code. As a positive side-effect this enables the saradc also for the P231 (GXL S905D) and Q201 (GXM S912) development boards which are similar to the P230/Q200 boards (P231 and Q201 use the internal 100Mbit/s PHY, while P230 and Q200 have an external RGMII PHY). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
Revision tags: v4.17.2, v4.17.1, v4.17, v4.16 |
|
#
972cd12a |
| 26-Mar-2018 |
Martin Blumenstingl <martin.blumenstingl@googlemail.com> |
ARM64: dts: meson-gx-p23x-q20x: enable the USB controller All S905D (GXL) and S912 (GXM) reference boards (namely these are P230, P231, Q200 and Q201) provide USB connectors. This en
ARM64: dts: meson-gx-p23x-q20x: enable the USB controller All S905D (GXL) and S912 (GXM) reference boards (namely these are P230, P231, Q200 and Q201) provide USB connectors. This enables the USB controller on these boards to make the USB ports actually usable. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
#
114abfe1 |
| 27-Feb-2018 |
Neil Armstrong <narmstrong@baylibre.com> |
ARM64: dts: amlogic: Convert to new-style SPDX license identifiers Move the SPDX-License-Identifier lines to the top and drop the license splat. Signed-off-by: Neil Armstrong <n
ARM64: dts: amlogic: Convert to new-style SPDX license identifiers Move the SPDX-License-Identifier lines to the top and drop the license splat. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
Revision tags: v4.15 |
|
#
059a58fc |
| 17-Jan-2018 |
Jorge Ramirez-Ortiz <jramirez@baylibre.com> |
ARM64: dts: meson: accept MAC addr from u-boot environment Extend configuring the MAC address from u-boot to all meson boards. I didn't test this changeset but having checked libret
ARM64: dts: meson: accept MAC addr from u-boot environment Extend configuring the MAC address from u-boot to all meson boards. I didn't test this changeset but having checked libretech's u-boot tree I believe it should just work. Signed-off-by: Jorge Ramirez-Ortiz <jramirez@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
Revision tags: v4.13.16 |
|
#
b409f625 |
| 20-Nov-2017 |
Neil Armstrong <narmstrong@baylibre.com> |
ARM64: dts: meson-gx: Add HDMI_5V regulator on selected boards On reference boards and derivatives, the HDMI Logic is powered by an external 5V regulator. This regulator was set by t
ARM64: dts: meson-gx: Add HDMI_5V regulator on selected boards On reference boards and derivatives, the HDMI Logic is powered by an external 5V regulator. This regulator was set by the Vendor U-Boot, add the regulator and set it always-on for now. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
Revision tags: v4.14, v4.13.5 |
|
#
ab36be66 |
| 03-Oct-2017 |
Neil Armstrong <narmstrong@baylibre.com> |
ARM64: dts: meson-gxl: Take eMMC data strobe out of eMMC pins Since the Data Strobe pin is optional, take it out of the default eMMC pins and add a separate entry. Signed-off-by
ARM64: dts: meson-gxl: Take eMMC data strobe out of eMMC pins Since the Data Strobe pin is optional, take it out of the default eMMC pins and add a separate entry. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
Revision tags: v4.13 |
|
#
67e7607f |
| 31-Aug-2017 |
Jerome Brunet <jbrunet@baylibre.com> |
ARM64: dts: meson: add mmc clk gate pins Add the pinctrl to switch mmc clk pins in gpio (pulled down) mode. This is necessary to be able to gate the clk outside of the SoC while keep
ARM64: dts: meson: add mmc clk gate pins Add the pinctrl to switch mmc clk pins in gpio (pulled down) mode. This is necessary to be able to gate the clk outside of the SoC while keeping it running in the controller Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
#
673ccaac |
| 31-Aug-2017 |
Jerome Brunet <jbrunet@baylibre.com> |
ARM64: dts: meson: remove cap-sd-highspeed from emmc nodes It does not make much sense to define cap-sd-highspeed in the emmc nodes Just remove it. Signed-off-by: Jerome Brunet
ARM64: dts: meson: remove cap-sd-highspeed from emmc nodes It does not make much sense to define cap-sd-highspeed in the emmc nodes Just remove it. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
#
b16c71c9 |
| 04-Aug-2017 |
Neil Armstrong <narmstrong@baylibre.com> |
ARM64: dts: meson-gx: Add AO CEC nodes This patch adds the AO CEC node in all the HDMI enabled boards DTS. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
ARM64: dts: meson-gx: Add AO CEC nodes This patch adds the AO CEC node in all the HDMI enabled boards DTS. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
Revision tags: v4.12, v4.10.17, v4.10.16 |
|
#
d5463d25 |
| 13-May-2017 |
Andreas Färber <afaerber@suse.de> |
arm64: dts: meson-gx-p23x-q20x: Fix node order Sort nodes referenced by label alphabetically. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Kevin Hilman <khilm
arm64: dts: meson-gx-p23x-q20x: Fix node order Sort nodes referenced by label alphabetically. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
#
b77b40ba |
| 13-May-2017 |
Andreas Färber <afaerber@suse.de> |
arm64: dts: meson-gx-p23x-q20x: Fix Wifi node name bcrmf -> brcmf -> wifi Fixes: bb51b5350d2f ("ARM64: dts: Add support for Meson GXM") Cc: Neil Armstrong <narmstrong@baylibre.c
arm64: dts: meson-gx-p23x-q20x: Fix Wifi node name bcrmf -> brcmf -> wifi Fixes: bb51b5350d2f ("ARM64: dts: Add support for Meson GXM") Cc: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
Revision tags: v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5 |
|
#
6939db7e |
| 21-Mar-2017 |
Neil Armstrong <narmstrong@baylibre.com> |
ARM64: dts: meson-gx: Add support for HDMI output Add HDMI output and connector nodes. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilm
ARM64: dts: meson-gx: Add support for HDMI output Add HDMI output and connector nodes. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
Revision tags: v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10, v4.9 |
|
#
bb51b535 |
| 22-Nov-2016 |
Neil Armstrong <narmstrong@baylibre.com> |
ARM64: dts: Add support for Meson GXM Following the Amlogic Linux kernel, it seem the only differences between the GXL and GXM SoCs are the CPU Clusters. This commit renames the
ARM64: dts: Add support for Meson GXM Following the Amlogic Linux kernel, it seem the only differences between the GXL and GXM SoCs are the CPU Clusters. This commit renames the gxl-s905d-p23x DTSI in a common file for S905D p23x and S912 q20x boards. Then adds a meson-gxm dtsi and reproduce the P23x to Q20x boards dts files since the S905D and S912 SoCs shares the same pinout and the P23x and Q20x boards are identical. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|