Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43 |
|
#
3eced2a2 |
| 31-Jul-2023 |
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> |
arm64: dts: amlogic: drop redundant status=okay in sound nodes
status=okay is by default.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Neil Armstrong <neil.armst
arm64: dts: amlogic: drop redundant status=okay in sound nodes
status=okay is by default.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230731093615.148949-1-krzysztof.kozlowski@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
show more ...
|
Revision tags: v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14 |
|
#
933b80ed |
| 01-Jan-2021 |
Christian Hewitt <christianshewitt@gmail.com> |
arm64: dts: meson: shorten audio card names for alsa compatibility
This patch shortens all audio card model names by dropping the SoC prefix (for conformity) and rewording those that are still longe
arm64: dts: meson: shorten audio card names for alsa compatibility
This patch shortens all audio card model names by dropping the SoC prefix (for conformity) and rewording those that are still longer than alsa's 15 character name limit [0] to avoid userspace config issues.
[0] https://github.com/torvalds/linux/blob/master/Documentation/sound/alsa-configuration.rst#common-parameters-for-top-sound-card-modules
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20210101063737.26635-1-christianshewitt@gmail.com
show more ...
|
Revision tags: v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33 |
|
#
3245a522 |
| 16-Apr-2020 |
Martin Blumenstingl <martin.blumenstingl@googlemail.com> |
arm64: dts: amlogic: use the new USB control driver for GXL and GXM
Add the correcly architectured USB Glue node and adapt all the Amlogic GXL and GXM board to the new organization.
Signed-off-by:
arm64: dts: amlogic: use the new USB control driver for GXL and GXM
Add the correcly architectured USB Glue node and adapt all the Amlogic GXL and GXM board to the new organization.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
show more ...
|
#
f3c35382 |
| 06-May-2020 |
Jerome Brunet <jbrunet@baylibre.com> |
arm64: dts: meson: p230-q200: add internal DAC support
Add the necessary bits to support the internal audio DAC the p230/q200 reference design derivated boards. The output of this DAC is provided on
arm64: dts: meson: p230-q200: add internal DAC support
Add the necessary bits to support the internal audio DAC the p230/q200 reference design derivated boards. The output of this DAC is provided on the 3.5mm jack connector
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200506221656.477379-3-jbrunet@baylibre.com
show more ...
|
#
3ffeb953 |
| 21-Apr-2020 |
Jerome Brunet <jbrunet@baylibre.com> |
arm64: dts: meson: p230-q200: add initial audio playback support
Add basic audio support on the p230/q200 reference design. This initial support is limited to HDMI i2s and SPDIF (LPCM).
Signed-off-
arm64: dts: meson: p230-q200: add initial audio playback support
Add basic audio support on the p230/q200 reference design. This initial support is limited to HDMI i2s and SPDIF (LPCM).
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Christian Hewitt <christianshewitt@gmail.com> Link: https://lore.kernel.org/r/20200421163935.775935-4-jbrunet@baylibre.com
show more ...
|
Revision tags: v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6 |
|
#
2f9139c2 |
| 26-Mar-2020 |
Martin Blumenstingl <martin.blumenstingl@googlemail.com> |
arm64: dts: amlogic: use the new USB control driver for GXL and GXM
Add the correcly architectured USB Glue node and adapt all the Amlogic GXL and GXM board to the new organization.
Signed-off-by:
arm64: dts: amlogic: use the new USB control driver for GXL and GXM
Add the correcly architectured USB Glue node and adapt all the Amlogic GXL and GXM board to the new organization.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200326134507.4808-11-narmstrong@baylibre.com
show more ...
|
Revision tags: v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12 |
|
#
86b8eaa2 |
| 29-Aug-2019 |
Neil Armstrong <narmstrong@baylibre.com> |
arm64: dts: meson-gx-p23x-q20x: add keep-power-in-suspend property in SDIO node
The WiFi firmware requires that the power is kept enabled while in suspend mode. Add the keep-power-in-suspend propert
arm64: dts: meson-gx-p23x-q20x: add keep-power-in-suspend property in SDIO node
The WiFi firmware requires that the power is kept enabled while in suspend mode. Add the keep-power-in-suspend property in the SDIO node to specify that the power must be kept when entering in a system wide suspend state.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
Revision tags: v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9 |
|
#
adc52bf7 |
| 18-Apr-2019 |
Jerome Brunet <jbrunet@baylibre.com> |
arm64: dts: meson: fix mmc v2 chips max frequencies
According the datasheets, emmc v2 chips (gxbb and gxl) don't support more that 100Mhz in UHS-1 SD modes and HS in SDIO.
Align the max-frequency t
arm64: dts: meson: fix mmc v2 chips max frequencies
According the datasheets, emmc v2 chips (gxbb and gxl) don't support more that 100Mhz in UHS-1 SD modes and HS in SDIO.
Align the max-frequency to 100MHz for UHS-1 and 50MHz for HS
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
Revision tags: v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16 |
|
#
f29200c8 |
| 14-Jan-2019 |
Loys Ollivier <lollivier@baylibre.com> |
arm64: dts: meson: Fix mmc cd-gpios polarity
Commit 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree") changed the behavior of "cd-inverted" to follow the device tree bindings specifi
arm64: dts: meson: Fix mmc cd-gpios polarity
Commit 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree") changed the behavior of "cd-inverted" to follow the device tree bindings specification: According to SDHCI standard, CD lines are specified as "active low". Using the "cd-inverted" property means that the CD line is "active high".
Fix the SD card description for meson by setting the cd-gpios as "active low", according to the boards specifications, and dropping the "cd-inverted" property.
Fixes: 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree") Signed-off-by: Loys Ollivier <lollivier@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
Revision tags: v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18 |
|
#
e1f2163d |
| 08-Nov-2018 |
Neil Armstrong <narmstrong@baylibre.com> |
arm64: dts: meson-gx: Add hdmi_5v regulator as hdmi tx supply
The hdmi_5v regulator must be enabled to provide power to the physical HDMI PHY and enables the HDMI 5V presence loopback for the monito
arm64: dts: meson-gx: Add hdmi_5v regulator as hdmi tx supply
The hdmi_5v regulator must be enabled to provide power to the physical HDMI PHY and enables the HDMI 5V presence loopback for the monitor.
Fixes: b409f625a6d5 ("ARM64: dts: meson-gx: Add HDMI_5V regulator on selected boards") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
Revision tags: v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3 |
|
#
1b2b1e75 |
| 23-Jun-2018 |
Martin Blumenstingl <martin.blumenstingl@googlemail.com> |
ARM64: dts: meson-gx-p23x-q20x: move the wifi node to each board's .dts
meson-gx-p23x-q20x.dtsi is currently used by five boards: - Amlogic P230 and P231 (which should be identical, apart from the
ARM64: dts: meson-gx-p23x-q20x: move the wifi node to each board's .dts
meson-gx-p23x-q20x.dtsi is currently used by five boards: - Amlogic P230 and P231 (which should be identical, apart from the external RGMII PHY on P230 whereas P231 can only use the internal PHY) - Amlogic Q200 (identical to P230 but with an S912 GXM SoC instead of a GXL S905D SoC) and Q201 (identical to P231 but with an S912 GXM SoC instead of a GXL S905D SoC) - NEXBOX A1 (based on the S912 GXM SoC)
The Amlogic P230 board uses a Broadcom BCM4356 SDIO wifi chip. Since the other Amlogic reference design boards are very similar it's safe to assume that these also use a Broadcom based SDIO wifi chip (which is also how it was configured in meson-gx-p23x-q20x.dtsi).
However, NEXBOX A1 comes with a "longsys LTM8830" SDIO wifi module, which is based on the "Qualcomm Atheros QCA9377-3(QCA1023-0)" chipset.
Thus move the wifi node from meson-gx-p23x-q20x.dtsi to each of the four Amlogic reference board's .dts files. There are no devicetree bindings for the QCA9377 SDIO wifi module yet, so nothing is added to meson-gxm-nexbox-a1.dts.
Fixes: f51b454549b812 ("ARM64: dts: meson-gxm: Add support for the Nexbox A1") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
#
41ed2e0d |
| 23-Jun-2018 |
Martin Blumenstingl <martin.blumenstingl@googlemail.com> |
ARM64: dts: meson: enable the saradc node in meson-gx-p23x-q20x.dtsi
meson-gxl-s905d-p230.dts and meson-gxm-q200.dts enable the saradc node (and configure it's vref-supply "VDDIO_AO18") in their cor
ARM64: dts: meson: enable the saradc node in meson-gx-p23x-q20x.dtsi
meson-gxl-s905d-p230.dts and meson-gxm-q200.dts enable the saradc node (and configure it's vref-supply "VDDIO_AO18") in their corresponding .dts file. Move both (the saradc node as well as the VDDIO_AO18 regulator) to remove some duplicate code.
As a positive side-effect this enables the saradc also for the P231 (GXL S905D) and Q201 (GXM S912) development boards which are similar to the P230/Q200 boards (P231 and Q201 use the internal 100Mbit/s PHY, while P230 and Q200 have an external RGMII PHY).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
Revision tags: v4.17.2, v4.17.1, v4.17, v4.16 |
|
#
972cd12a |
| 26-Mar-2018 |
Martin Blumenstingl <martin.blumenstingl@googlemail.com> |
ARM64: dts: meson-gx-p23x-q20x: enable the USB controller
All S905D (GXL) and S912 (GXM) reference boards (namely these are P230, P231, Q200 and Q201) provide USB connectors. This enables the USB co
ARM64: dts: meson-gx-p23x-q20x: enable the USB controller
All S905D (GXL) and S912 (GXM) reference boards (namely these are P230, P231, Q200 and Q201) provide USB connectors. This enables the USB controller on these boards to make the USB ports actually usable.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
#
114abfe1 |
| 27-Feb-2018 |
Neil Armstrong <narmstrong@baylibre.com> |
ARM64: dts: amlogic: Convert to new-style SPDX license identifiers
Move the SPDX-License-Identifier lines to the top and drop the license splat.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.c
ARM64: dts: amlogic: Convert to new-style SPDX license identifiers
Move the SPDX-License-Identifier lines to the top and drop the license splat.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
Revision tags: v4.15 |
|
#
059a58fc |
| 17-Jan-2018 |
Jorge Ramirez-Ortiz <jramirez@baylibre.com> |
ARM64: dts: meson: accept MAC addr from u-boot environment
Extend configuring the MAC address from u-boot to all meson boards.
I didn't test this changeset but having checked libretech's u-boot tre
ARM64: dts: meson: accept MAC addr from u-boot environment
Extend configuring the MAC address from u-boot to all meson boards.
I didn't test this changeset but having checked libretech's u-boot tree I believe it should just work.
Signed-off-by: Jorge Ramirez-Ortiz <jramirez@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
Revision tags: v4.13.16 |
|
#
b409f625 |
| 20-Nov-2017 |
Neil Armstrong <narmstrong@baylibre.com> |
ARM64: dts: meson-gx: Add HDMI_5V regulator on selected boards
On reference boards and derivatives, the HDMI Logic is powered by an external 5V regulator. This regulator was set by the Vendor U-Boot
ARM64: dts: meson-gx: Add HDMI_5V regulator on selected boards
On reference boards and derivatives, the HDMI Logic is powered by an external 5V regulator. This regulator was set by the Vendor U-Boot, add the regulator and set it always-on for now.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
Revision tags: v4.14, v4.13.5 |
|
#
ab36be66 |
| 03-Oct-2017 |
Neil Armstrong <narmstrong@baylibre.com> |
ARM64: dts: meson-gxl: Take eMMC data strobe out of eMMC pins
Since the Data Strobe pin is optional, take it out of the default eMMC pins and add a separate entry.
Signed-off-by: Neil Armstrong <na
ARM64: dts: meson-gxl: Take eMMC data strobe out of eMMC pins
Since the Data Strobe pin is optional, take it out of the default eMMC pins and add a separate entry.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
Revision tags: v4.13 |
|
#
67e7607f |
| 31-Aug-2017 |
Jerome Brunet <jbrunet@baylibre.com> |
ARM64: dts: meson: add mmc clk gate pins
Add the pinctrl to switch mmc clk pins in gpio (pulled down) mode. This is necessary to be able to gate the clk outside of the SoC while keeping it running i
ARM64: dts: meson: add mmc clk gate pins
Add the pinctrl to switch mmc clk pins in gpio (pulled down) mode. This is necessary to be able to gate the clk outside of the SoC while keeping it running in the controller
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
#
673ccaac |
| 31-Aug-2017 |
Jerome Brunet <jbrunet@baylibre.com> |
ARM64: dts: meson: remove cap-sd-highspeed from emmc nodes
It does not make much sense to define cap-sd-highspeed in the emmc nodes Just remove it.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.co
ARM64: dts: meson: remove cap-sd-highspeed from emmc nodes
It does not make much sense to define cap-sd-highspeed in the emmc nodes Just remove it.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
#
b16c71c9 |
| 04-Aug-2017 |
Neil Armstrong <narmstrong@baylibre.com> |
ARM64: dts: meson-gx: Add AO CEC nodes
This patch adds the AO CEC node in all the HDMI enabled boards DTS.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilm
ARM64: dts: meson-gx: Add AO CEC nodes
This patch adds the AO CEC node in all the HDMI enabled boards DTS.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
Revision tags: v4.12, v4.10.17, v4.10.16 |
|
#
d5463d25 |
| 13-May-2017 |
Andreas Färber <afaerber@suse.de> |
arm64: dts: meson-gx-p23x-q20x: Fix node order
Sort nodes referenced by label alphabetically.
Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
#
b77b40ba |
| 13-May-2017 |
Andreas Färber <afaerber@suse.de> |
arm64: dts: meson-gx-p23x-q20x: Fix Wifi node name
bcrmf -> brcmf -> wifi
Fixes: bb51b5350d2f ("ARM64: dts: Add support for Meson GXM") Cc: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: A
arm64: dts: meson-gx-p23x-q20x: Fix Wifi node name
bcrmf -> brcmf -> wifi
Fixes: bb51b5350d2f ("ARM64: dts: Add support for Meson GXM") Cc: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
Revision tags: v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5 |
|
#
6939db7e |
| 21-Mar-2017 |
Neil Armstrong <narmstrong@baylibre.com> |
ARM64: dts: meson-gx: Add support for HDMI output
Add HDMI output and connector nodes.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
Revision tags: v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10, v4.9 |
|
#
bb51b535 |
| 22-Nov-2016 |
Neil Armstrong <narmstrong@baylibre.com> |
ARM64: dts: Add support for Meson GXM
Following the Amlogic Linux kernel, it seem the only differences between the GXL and GXM SoCs are the CPU Clusters.
This commit renames the gxl-s905d-p23x DTSI
ARM64: dts: Add support for Meson GXM
Following the Amlogic Linux kernel, it seem the only differences between the GXL and GXM SoCs are the CPU Clusters.
This commit renames the gxl-s905d-p23x DTSI in a common file for S905D p23x and S912 q20x boards.
Then adds a meson-gxm dtsi and reproduce the P23x to Q20x boards dts files since the S905D and S912 SoCs shares the same pinout and the P23x and Q20x boards are identical.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
#
f3c35382 |
| 06-May-2020 |
Jerome Brunet <jbrunet@baylibre.com> |
arm64: dts: meson: p230-q200: add internal DAC support Add the necessary bits to support the internal audio DAC the p230/q200 reference design derivated boards. The output of this DAC is
arm64: dts: meson: p230-q200: add internal DAC support Add the necessary bits to support the internal audio DAC the p230/q200 reference design derivated boards. The output of this DAC is provided on the 3.5mm jack connector Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200506221656.477379-3-jbrunet@baylibre.com
show more ...
|