Revision tags: v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17 |
|
#
927f42fc |
| 22-Oct-2020 |
Jernej Skrabec <jernej.skrabec@siol.net> |
arm64: dts: allwinner: a64: Pine64 Plus: Fix ethernet node
According to board schematic, PHY provides both, RX and TX delays. However, according to "fix" Realtek provided for this board, only TX del
arm64: dts: allwinner: a64: Pine64 Plus: Fix ethernet node
According to board schematic, PHY provides both, RX and TX delays. However, according to "fix" Realtek provided for this board, only TX delay should be provided by PHY. Tests show that both variants work but TX only PHY delay works slightly better.
Update ethernet node to reflect the fact that PHY provides TX delay.
Fixes: 94f442886711 ("arm64: dts: allwinner: A64: Restore EMAC changes") Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20201022211301.3548422-1-jernej.skrabec@siol.net
show more ...
|
Revision tags: v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4 |
|
#
cabbaed7 |
| 14-Dec-2019 |
Clément Péron <peron.clem@gmail.com> |
arm64: dts: allwinner: unify header comment style
Allwinner device tree files used different comment style for copyright notice.
Update this to keep a coherency.
Signed-off-by: Clément Péron <pero
arm64: dts: allwinner: unify header comment style
Allwinner device tree files used different comment style for copyright notice.
Update this to keep a coherency.
Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
show more ...
|
#
b4b8f2c9 |
| 14-Dec-2019 |
Clément Péron <peron.clem@gmail.com> |
arm64: dts: allwinner: Convert license to SPDX identifier
Use a shorter SPDX identifier instead of pasting the whole license.
Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Maxi
arm64: dts: allwinner: Convert license to SPDX identifier
Use a shorter SPDX identifier instead of pasting the whole license.
Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
show more ...
|
#
d2ab1a67 |
| 14-Dec-2019 |
Clément Péron <peron.clem@gmail.com> |
arm64: dts: allwinner: Fix wrong license header
Some headers specify that files are under dual-licensed GPL2.0+ and X11. But in fact, it turns out that the full licenses texts associated are GPL2.0+
arm64: dts: allwinner: Fix wrong license header
Some headers specify that files are under dual-licensed GPL2.0+ and X11. But in fact, it turns out that the full licenses texts associated are GPL2.0+ and MIT.
Fix license headers to reflect real licenses associated.
Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
show more ...
|
Revision tags: v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14 |
|
#
25113667 |
| 09-Sep-2019 |
Jernej Skrabec <jernej.skrabec@siol.net> |
arm64: dts: allwinner: a64: pine64-plus: Add PHY regulator delay
Depending on kernel and bootloader configuration, it's possible that Realtek ethernet PHY isn't powered on properly. According to the
arm64: dts: allwinner: a64: pine64-plus: Add PHY regulator delay
Depending on kernel and bootloader configuration, it's possible that Realtek ethernet PHY isn't powered on properly. According to the datasheet, it needs 30ms to power up and then some more time before it can be used.
Fix that by adding 100ms ramp delay to regulator responsible for powering PHY.
Fixes: 94dcfdc77fc5 ("arm64: allwinner: pine64-plus: Enable dwmac-sun8i") Suggested-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <mripard@kernel.org>
show more ...
|
Revision tags: v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16, v4.15, v4.13.16, v4.14 |
|
#
94f44288 |
| 31-Oct-2017 |
Corentin Labbe <clabbe.montjoie@gmail.com> |
arm64: dts: allwinner: A64: Restore EMAC changes
The original dwmac-sun8i DT bindings have some issue on how to handle integrated PHY and was reverted in last RC of 4.13. But now we have a solution
arm64: dts: allwinner: A64: Restore EMAC changes
The original dwmac-sun8i DT bindings have some issue on how to handle integrated PHY and was reverted in last RC of 4.13. But now we have a solution so we need to get back that was reverted.
This patch restore arm64 DT about dwmac-sun8i for A64 This reverts commit 87e1f5e8bb4b ("arm64: dts: allwinner: Revert EMAC changes")
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
show more ...
|
Revision tags: v4.13.5, v4.13 |
|
#
87e1f5e8 |
| 25-Aug-2017 |
Maxime Ripard <maxime.ripard@free-electrons.com> |
arm64: dts: allwinner: Revert EMAC changes
Since the discussion is not settled yet for the EMAC, and that the release in getting really close, let's revert the changes for now, and we'll reintroduce
arm64: dts: allwinner: Revert EMAC changes
Since the discussion is not settled yet for the EMAC, and that the release in getting really close, let's revert the changes for now, and we'll reintroduce them later.
Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
show more ...
|
Revision tags: v4.12 |
|
#
9d46b770 |
| 30-Jun-2017 |
Maxime Ripard <maxime.ripard@free-electrons.com> |
arm: sunxi: Revert changes merged through net-next.
This reverts commits 2c0cba482e79 ("arm: sun8i: sunxi-h3-h5: Add dt node for the syscon control module") to 2428fd0fe550 ("arm64: defconfig: Enabl
arm: sunxi: Revert changes merged through net-next.
This reverts commits 2c0cba482e79 ("arm: sun8i: sunxi-h3-h5: Add dt node for the syscon control module") to 2428fd0fe550 ("arm64: defconfig: Enable dwmac-sun8i driver on defconfig") and 3432a86e641c ("arm: sun8i: orangepipc: use internal phy-mode") to 5a79b4f2a5e7 ("arm: sun8i: orangepi-2: use internal phy-mode") that should be merged through the arm-soc tree, and end up in merge conflicts and build failures.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
#
94dcfdc7 |
| 31-May-2017 |
Corentin Labbe <clabbe.montjoie@gmail.com> |
arm64: allwinner: pine64-plus: Enable dwmac-sun8i
The dwmac-sun8i hardware is present on the pine64 plus. It uses an external PHY rtl8211e via RGMII.
Signed-off-by: Corentin Labbe <clabbe.montjoie@
arm64: allwinner: pine64-plus: Enable dwmac-sun8i
The dwmac-sun8i hardware is present on the pine64 plus. It uses an external PHY rtl8211e via RGMII.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
show more ...
|
#
72aa5f0f |
| 31-May-2017 |
LABBE Corentin <clabbe.montjoie@gmail.com> |
arm64: allwinner: pine64-plus: Enable dwmac-sun8i
The dwmac-sun8i hardware is present on the pine64 plus. It uses an external PHY rtl8211e via RGMII.
Signed-off-by: Corentin Labbe <clabbe.montjoie@
arm64: allwinner: pine64-plus: Enable dwmac-sun8i
The dwmac-sun8i hardware is present on the pine64 plus. It uses an external PHY rtl8211e via RGMII.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10, v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28, v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4, v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1, v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1, openbmc-20160713-1, v4.4.15, v4.6.4, v4.6.3, v4.4.14, v4.6.2, v4.4.13, openbmc-20160606-1, v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8, v4.4.7, openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6, v4.5, v4.4.5, v4.4.4, v4.4.3, openbmc-20160222-1, v4.4.2, openbmc-20160212-1, openbmc-20160210-1, openbmc-20160202-2, openbmc-20160202-1, v4.4.1, openbmc-20160127-1, openbmc-20160120-1 |
|
#
4e388608 |
| 19-Jan-2016 |
Andre Przywara <andre.przywara@arm.com> |
arm64: dts: add Pine64 support
The Pine64 is a cost-efficient development board based on the Allwinner A64 SoC. There are three models: the basic version with Fast Ethernet and 512 MB of DRAM (Pine6
arm64: dts: add Pine64 support
The Pine64 is a cost-efficient development board based on the Allwinner A64 SoC. There are three models: the basic version with Fast Ethernet and 512 MB of DRAM (Pine64) and two Pine64+ versions, which both feature Gigabit Ethernet and additional connectors for touchscreens and a camera. Or as my son put it: "Those are smaller and these are missing." ;-) The two Pine64+ models just differ in the amount of DRAM (1GB vs. 2GB). Since U-Boot will figure out the right size for us and patches the DT accordingly we just need to provide one DT for the Pine64+.
Signed-off-by: Andre Przywara <andre.przywara@arm.com> [Maxime: Removed the common DTSI and include directly the pine64 DTS] Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
show more ...
|
Revision tags: v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17 |
|
#
927f42fc |
| 22-Oct-2020 |
Jernej Skrabec <jernej.skrabec@siol.net> |
arm64: dts: allwinner: a64: Pine64 Plus: Fix ethernet node According to board schematic, PHY provides both, RX and TX delays. However, according to "fix" Realtek provided for this board,
arm64: dts: allwinner: a64: Pine64 Plus: Fix ethernet node According to board schematic, PHY provides both, RX and TX delays. However, according to "fix" Realtek provided for this board, only TX delay should be provided by PHY. Tests show that both variants work but TX only PHY delay works slightly better. Update ethernet node to reflect the fact that PHY provides TX delay. Fixes: 94f442886711 ("arm64: dts: allwinner: A64: Restore EMAC changes") Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20201022211301.3548422-1-jernej.skrabec@siol.net
show more ...
|
Revision tags: v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4 |
|
#
cabbaed7 |
| 14-Dec-2019 |
Clément Péron <peron.clem@gmail.com> |
arm64: dts: allwinner: unify header comment style Allwinner device tree files used different comment style for copyright notice. Update this to keep a coherency. Signed
arm64: dts: allwinner: unify header comment style Allwinner device tree files used different comment style for copyright notice. Update this to keep a coherency. Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
show more ...
|
#
b4b8f2c9 |
| 14-Dec-2019 |
Clément Péron <peron.clem@gmail.com> |
arm64: dts: allwinner: Convert license to SPDX identifier Use a shorter SPDX identifier instead of pasting the whole license. Signed-off-by: Clément Péron <peron.clem@gmail.com>
arm64: dts: allwinner: Convert license to SPDX identifier Use a shorter SPDX identifier instead of pasting the whole license. Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
show more ...
|
#
d2ab1a67 |
| 14-Dec-2019 |
Clément Péron <peron.clem@gmail.com> |
arm64: dts: allwinner: Fix wrong license header Some headers specify that files are under dual-licensed GPL2.0+ and X11. But in fact, it turns out that the full licenses texts associ
arm64: dts: allwinner: Fix wrong license header Some headers specify that files are under dual-licensed GPL2.0+ and X11. But in fact, it turns out that the full licenses texts associated are GPL2.0+ and MIT. Fix license headers to reflect real licenses associated. Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
show more ...
|
Revision tags: v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14 |
|
#
25113667 |
| 09-Sep-2019 |
Jernej Skrabec <jernej.skrabec@siol.net> |
arm64: dts: allwinner: a64: pine64-plus: Add PHY regulator delay Depending on kernel and bootloader configuration, it's possible that Realtek ethernet PHY isn't powered on properly. Acco
arm64: dts: allwinner: a64: pine64-plus: Add PHY regulator delay Depending on kernel and bootloader configuration, it's possible that Realtek ethernet PHY isn't powered on properly. According to the datasheet, it needs 30ms to power up and then some more time before it can be used. Fix that by adding 100ms ramp delay to regulator responsible for powering PHY. Fixes: 94dcfdc77fc5 ("arm64: allwinner: pine64-plus: Enable dwmac-sun8i") Suggested-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <mripard@kernel.org>
show more ...
|
Revision tags: v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16, v4.15, v4.13.16, v4.14 |
|
#
94f44288 |
| 31-Oct-2017 |
Corentin Labbe <clabbe.montjoie@gmail.com> |
arm64: dts: allwinner: A64: Restore EMAC changes The original dwmac-sun8i DT bindings have some issue on how to handle integrated PHY and was reverted in last RC of 4.13. But now we
arm64: dts: allwinner: A64: Restore EMAC changes The original dwmac-sun8i DT bindings have some issue on how to handle integrated PHY and was reverted in last RC of 4.13. But now we have a solution so we need to get back that was reverted. This patch restore arm64 DT about dwmac-sun8i for A64 This reverts commit 87e1f5e8bb4b ("arm64: dts: allwinner: Revert EMAC changes") Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
show more ...
|
Revision tags: v4.13.5, v4.13 |
|
#
87e1f5e8 |
| 25-Aug-2017 |
Maxime Ripard <maxime.ripard@free-electrons.com> |
arm64: dts: allwinner: Revert EMAC changes Since the discussion is not settled yet for the EMAC, and that the release in getting really close, let's revert the changes for now, and we'll
arm64: dts: allwinner: Revert EMAC changes Since the discussion is not settled yet for the EMAC, and that the release in getting really close, let's revert the changes for now, and we'll reintroduce them later. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
show more ...
|
#
94dcfdc7 |
| 31-May-2017 |
Corentin Labbe <clabbe.montjoie@gmail.com> |
arm64: allwinner: pine64-plus: Enable dwmac-sun8i The dwmac-sun8i hardware is present on the pine64 plus. It uses an external PHY rtl8211e via RGMII. Signed-off-by: Corentin Lab
arm64: allwinner: pine64-plus: Enable dwmac-sun8i The dwmac-sun8i hardware is present on the pine64 plus. It uses an external PHY rtl8211e via RGMII. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
show more ...
|
Revision tags: v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10, v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28, v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4, v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1, v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1, openbmc-20160713-1, v4.4.15, v4.6.4, v4.6.3, v4.4.14, v4.6.2, v4.4.13, openbmc-20160606-1, v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8, v4.4.7, openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6, v4.5, v4.4.5, v4.4.4, v4.4.3, openbmc-20160222-1, v4.4.2, openbmc-20160212-1, openbmc-20160210-1, openbmc-20160202-2, openbmc-20160202-1, v4.4.1, openbmc-20160127-1, openbmc-20160120-1 |
|
#
4e388608 |
| 19-Jan-2016 |
Andre Przywara <andre.przywara@arm.com> |
arm64: dts: add Pine64 support The Pine64 is a cost-efficient development board based on the Allwinner A64 SoC. There are three models: the basic version with Fast Ethernet and 5
arm64: dts: add Pine64 support The Pine64 is a cost-efficient development board based on the Allwinner A64 SoC. There are three models: the basic version with Fast Ethernet and 512 MB of DRAM (Pine64) and two Pine64+ versions, which both feature Gigabit Ethernet and additional connectors for touchscreens and a camera. Or as my son put it: "Those are smaller and these are missing." ;-) The two Pine64+ models just differ in the amount of DRAM (1GB vs. 2GB). Since U-Boot will figure out the right size for us and patches the DT accordingly we just need to provide one DT for the Pine64+. Signed-off-by: Andre Przywara <andre.przywara@arm.com> [Maxime: Removed the common DTSI and include directly the pine64 DTS] Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
show more ...
|