arm64: allwinner: a64: add proper support for the Wi-Fi on BPi M64

BPi M64 has an AP6212 Wi-Fi/Bluetooth combo module, and the Wi-Fi SDIO
card is connected to the mmc1 controller.

The pwrseq of the

arm64: allwinner: a64: add proper support for the Wi-Fi on BPi M64

BPi M64 has an AP6212 Wi-Fi/Bluetooth combo module, and the Wi-Fi SDIO
card is connected to the mmc1 controller.

The pwrseq of the mmc1 (used to reset the card) used to missing, and the
out-of-band interrupt line of the card is not specified.

Fix these issues for proper Wi-Fi support of BPi M64.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>

show more ...

arm64: allwinner: a64: enable AXP803 for Banana Pi M64

Banana Pi M64 board uses an AXP803 PMIC.

Enable the PMIC and its regulators.

As we have now proper regulators support, missing or dummy regul

arm64: allwinner: a64: enable AXP803 for Banana Pi M64

Banana Pi M64 board uses an AXP803 PMIC.

Enable the PMIC and its regulators.

As we have now proper regulators support, missing or dummy regulators
are changed to the correct ones.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>

show more ...

arm64: allwinner: a64: enable USB host controller for BPi M64

Banana Pi M64 connects the USB host-only controller on A64 SoC to a USB
hub, which provided the two USB Type-A ports on the board.

Enab

arm64: allwinner: a64: enable USB host controller for BPi M64

Banana Pi M64 connects the USB host-only controller on A64 SoC to a USB
hub, which provided the two USB Type-A ports on the board.

Enable the USB host controller.

The OTG function of the Micro-USB port needs the drivevbus function of
the AXP803 driver implemented, so it's not enabled now.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>

show more ...

arm64: allwinner: a64: bananapi-m64: add missing ethernet0 alias

The EMAC Ethernet controller was enabled, but an accompanying alias
was not added. This results in unstable numbering if other Ethern

arm64: allwinner: a64: bananapi-m64: add missing ethernet0 alias

The EMAC Ethernet controller was enabled, but an accompanying alias
was not added. This results in unstable numbering if other Ethernet
devices, such as a USB dongle, are present. Also, the bootloader uses
the alias to assign a generated stable MAC address to the device node.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Fixes: e7295499903d ("arm64: allwinner: bananapi-m64: Enable dwmac-sun8i")
[wens@csie.org: Rewrite commit log as fixing a previous patch with Fixes]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>

show more ...

arm: sunxi: Revert changes merged through net-next.

This reverts commits 2c0cba482e79 ("arm: sun8i: sunxi-h3-h5: Add dt node
for the syscon control module") to 2428fd0fe550 ("arm64: defconfig: Enabl

arm: sunxi: Revert changes merged through net-next.

This reverts commits 2c0cba482e79 ("arm: sun8i: sunxi-h3-h5: Add dt node
for the syscon control module") to 2428fd0fe550 ("arm64: defconfig: Enable
dwmac-sun8i driver on defconfig") and 3432a86e641c ("arm: sun8i:
orangepipc: use internal phy-mode") to 5a79b4f2a5e7 ("arm: sun8i:
orangepi-2: use internal phy-mode") that should be merged
through the arm-soc tree, and end up in merge conflicts and build failures.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

arm64: allwinner: bananapi-m64: Enable dwmac-sun8i

The dwmac-sun8i hardware is present on the BananaPi M64.
It uses an external PHY rtl8211e via RGMII.

Signed-off-by: Corentin Labbe <clabbe.montjo

arm64: allwinner: bananapi-m64: Enable dwmac-sun8i

The dwmac-sun8i hardware is present on the BananaPi M64.
It uses an external PHY rtl8211e via RGMII.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

show more ...

arm64: allwinner: bananapi-m64: Enable dwmac-sun8i

The dwmac-sun8i hardware is present on the BananaPi M64.
It uses an external PHY rtl8211e via RGMII.

Signed-off-by: Corentin Labbe <clabbe.montjo

arm64: allwinner: bananapi-m64: Enable dwmac-sun8i

The dwmac-sun8i hardware is present on the BananaPi M64.
It uses an external PHY rtl8211e via RGMII.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

arm64: allwinner: add BananaPi-M64 support

The Banana Pi M64 board is a typical single board computer based on the
Allwinner A64 SoC. Aside from the usual peripherals it features eMMC
storage, which

arm64: allwinner: add BananaPi-M64 support

The Banana Pi M64 board is a typical single board computer based on the
Allwinner A64 SoC. Aside from the usual peripherals it features eMMC
storage, which is connected to the 8-bit capable SDHC2 controller.
Also it has a soldered WiFi/Bluetooth chip, so we enable UART1 and SDHC1
as those two interfaces are connected to it.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>

show more ...

arm64: dts: allwinner: a64: bananapi-m64: Enable RGMII RX/TX delay on PHY

The Ethernet PHY on the Bananapi M64 has the RX and TX delays
enabled on the PHY, using pull-ups on the RXDLY an

arm64: dts: allwinner: a64: bananapi-m64: Enable RGMII RX/TX delay on PHY

The Ethernet PHY on the Bananapi M64 has the RX and TX delays
enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins.

Fix the phy-mode description to correct reflect this so that the
implementation doesn't reconfigure the delays incorrectly. This
happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e
rx/tx delay config").

Fixes: e7295499903d ("arm64: allwinner: bananapi-m64: Enable dwmac-sun8i")
Fixes: 94f442886711 ("arm64: dts: allwinner: A64: Restore EMAC changes")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://lore.kernel.org/r/20201024162515.30032-10-wens@kernel.org

show more ...

arm64: dts: allwinner: a64: Update codec widget names

The sun8i-codec driver introduced a new set of DAPM widgets that more
accurately describe the hardware topology. Update the various

arm64: dts: allwinner: a64: Update codec widget names

The sun8i-codec driver introduced a new set of DAPM widgets that more
accurately describe the hardware topology. Update the various device
trees to use the new widget names.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200726012557.38282-7-samuel@sholland.org

show more ...

arm64: dts: allwinner: a64: enable DVFS

Add CPU regulator and operating points for all the A64-based boards
that are currently supported to enable DVFS.

Signed-off-by: Vasily Kh

arm64: dts: allwinner: a64: enable DVFS

Add CPU regulator and operating points for all the A64-based boards
that are currently supported to enable DVFS.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

show more ...

arm64: dts: allwinner: unify header comment style

Allwinner device tree files used different comment style for
copyright notice.

Update this to keep a coherency.

Signed

arm64: dts: allwinner: unify header comment style

Allwinner device tree files used different comment style for
copyright notice.

Update this to keep a coherency.

Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

show more ...

arm64: dts: allwinner: Convert license to SPDX identifier

Use a shorter SPDX identifier instead of pasting the
whole license.

Signed-off-by: Clément Péron <peron.clem@gmail.com>

arm64: dts: allwinner: Convert license to SPDX identifier

Use a shorter SPDX identifier instead of pasting the
whole license.

Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

show more ...

arm64: dts: allwinner: Fix wrong license header

Some headers specify that files are under dual-licensed GPL2.0+
and X11. But in fact, it turns out that the full licenses texts
associ

arm64: dts: allwinner: Fix wrong license header

Some headers specify that files are under dual-licensed GPL2.0+
and X11. But in fact, it turns out that the full licenses texts
associated are GPL2.0+ and MIT.

Fix license headers to reflect real licenses associated.

Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

show more ...

arm64: dts: allwinner: a64: bananapi-m64: Enable PMIC USB power supply

The Bananapi M64 has a micro-USB connector with USB OTG support (that
is already enabled). VBUS from this connector

arm64: dts: allwinner: a64: bananapi-m64: Enable PMIC USB power supply

The Bananapi M64 has a micro-USB connector with USB OTG support (that
is already enabled). VBUS from this connector is wired to the PMIC's
VBUS input.

Enable the PMIC's USB power supply on this board, and also hook it up
to the USB PHY.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

show more ...

arm64: dts: allwinner: a64: move I2C pinctrl to dtsi

There is only one pinmuxing available for each I2C controller.

So, move pinctrl for i2c0, i2c1 from board dts files into SoC dts

arm64: dts: allwinner: a64: move I2C pinctrl to dtsi

There is only one pinmuxing available for each I2C controller.

So, move pinctrl for i2c0, i2c1 from board dts files into SoC dtsi.

By moving these pinctrls the i2c1 node from Nanopi A64 just have a
status, which is disabled already so remove the entire node from it.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

show more ...

arm64: dts: allwinner: a64: Rename hpvcc-supply to cpvdd-supply

The A64 datasheet lists the supply rail for the headphone amp's charge
pump as "CPVDD". cpvdd-supply is the name of the pr

arm64: dts: allwinner: a64: Rename hpvcc-supply to cpvdd-supply

The A64 datasheet lists the supply rail for the headphone amp's charge
pump as "CPVDD". cpvdd-supply is the name of the property for this power
rail specified in the device tree bindings. "HPVCC" was the name used in
the A33 datasheet for the same function.

Rename the supply so it matches the datasheet and bindings.

Fixes: c56689e6f2fb ("arm64: dts: allwinner: a64: bananapi-m64: Enable audio codec")
Fixes: 6de8e717848f ("arm64: dts: allwinner: a64: enable sound on Pinebook")
Fixes: 498c21f233ed ("arm64: dts: allwinner: a64: enable sound on Pine64 and SoPine")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>

show more ...

arm64: dts: allwinner: a64: Enable PMIC power supplies on various boards

On these A64 devices, the DC input jacks are wired to the ACIN pins of
the PMIC, which is represented by the AC p

arm64: dts: allwinner: a64: Enable PMIC power supplies on various boards

On these A64 devices, the DC input jacks are wired to the ACIN pins of
the PMIC, which is represented by the AC power supply. With the
exception of the Nanopi A64, all devices include LiPo batteries or have
connectors for them, which are represented by the battery power supply.

Enable these power supplies in the device tree.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

show more ...

arm64: dts: allwinner: a64: bananapi-m64: Add Bluetooth device node

The AP6212 is based on the Broadcom BCM43430 or BCM43438. The WiFi side
identifies as BCM43430, while the Bluetooth si

arm64: dts: allwinner: a64: bananapi-m64: Add Bluetooth device node

The AP6212 is based on the Broadcom BCM43430 or BCM43438. The WiFi side
identifies as BCM43430, while the Bluetooth side identifies as BCM43438.

The Bluetooth side is connected to UART1 in a 4 wire configuration. Same
as the WiFi side, due to being the same chip and package, DLDO2 provides
overall power via VBAT, and DLDO4 provides I/O power via VDDIO. The RTC
clock output provides the LPO low power clock at 32.768 kHz.

This patch enables Bluetooth on this board, and also adds the missing
LPO clock on the WiFi side. There is also a PCM connection for Bluetooth,
but this is not covered here.

Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>

show more ...

arm64: dts: allwinner: a64: bananapi-m64: Enable audio codec

This patch enables audio via the SoC's internal audio codec. All
relevant device nodes are enabled, and the routing is set to

arm64: dts: allwinner: a64: bananapi-m64: Enable audio codec

This patch enables audio via the SoC's internal audio codec. All
relevant device nodes are enabled, and the routing is set to match
the board design. MIC1 is routed to an onboard microphone, with MBIAS
providing power. MIC2 and HP are routed to the 3.5mm headset TRRS jack.
No phantom power is provided to the headset microphone.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

show more ...

arm64: dts: allwinner: a64: Enable HDMI output on A64 boards w/ HDMI

Enable all necessary device tree nodes and add connector node to device
trees for all supported A64 boards with HDMI.

arm64: dts: allwinner: a64: Enable HDMI output on A64 boards w/ HDMI

Enable all necessary device tree nodes and add connector node to device
trees for all supported A64 boards with HDMI.

Jagan, tested on BPI-M64, OPI-Win, A64-Olinuxino, NPI-A64
Vasily, tested on pine64-lts

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Icenowy: squash all board patches altogether and change supply name]
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>

show more ...

arm64: dts: allwinner: a64: Rename uart0_pins_a label to uart0_pb_pins

The pinmux name and label for a specific function should denote which
pingroup it is on, or if there is only one op

arm64: dts: allwinner: a64: Rename uart0_pins_a label to uart0_pb_pins

The pinmux name and label for a specific function should denote which
pingroup it is on, or if there is only one option for the function, have
not enumerating prefix/suffix at all.

The "uart0_pins_a" label is renamed to "uart0_pb_pins" to fit our
current style. The node name "uart0" is also changed to "uart0-pb-pins"
to match.

Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>

show more ...

arm64: dts: allwinner: a64: Split out data strobe pin from mmc2 pinmux

The eMMC 5.0 standard introduced the data strobe (DS) pin. This pin is
not used for pre-5.0 data modes, nor is it f

arm64: dts: allwinner: a64: Split out data strobe pin from mmc2 pinmux

The eMMC 5.0 standard introduced the data strobe (DS) pin. This pin is
not used for pre-5.0 data modes, nor is it found on pre-5.0 eMMC chips.
On the A64, this pin is muxed with spi0's MISO pin. If the DS pin is
included in the mmc2 pinmux by default, this wil prevent the usage
of both mmc2 and spi0 together.

Instead, split out the DS pin to a separate pinmux that only gets used
by boards that actually have it wired up. Currently supported ones
include the Bananapi M64 and Pine64 Pinebook. These are fixed up.

Fixes: a3e8f4926248 ("arm64: allwinner: a64: Add MMC pinctrl nodes")
Fixes: b8bcf0e1b212 ("arm64: allwinner: add BananaPi-M64 support")
Fixes: df35fbcfa398 ("arm64: dts: allwinner: add support for Pinebook")
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>

show more ...

arm64: dts: allwinner: a64: add HDMI regulator to all DTs' simplefb_hdmi

On usual A64 board design the power of HDMI controller is connected to
DLDO1 of the AXP803 PMIC. If this regulato

arm64: dts: allwinner: a64: add HDMI regulator to all DTs' simplefb_hdmi

On usual A64 board design the power of HDMI controller is connected to
DLDO1 of the AXP803 PMIC. If this regulator is shut down, the HDMI
output will be blank. Therefore the simplefb driver should keep this
regulator on.

Add the regulator to all currently available A64 boards' simplefb_hdmi
device node, if the board is capable of outputing HDMI.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

show more ...

arm64: dts: allwinner: a64: bananapi-m64: add usb otg

Add usb otg support for bananapi-m64 board,
- USB-ID connected with PH9
- USB-DRVVBUS controlled by N_VBUSEN pin from PMIC

arm64: dts: allwinner: a64: bananapi-m64: add usb otg

Add usb otg support for bananapi-m64 board,
- USB-ID connected with PH9
- USB-DRVVBUS controlled by N_VBUSEN pin from PMIC

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>

show more ...