1/*
2 * Copyright (c) 2016 ARM Ltd.
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 *  a) This library is free software; you can redistribute it and/or
10 *     modify it under the terms of the GNU General Public License as
11 *     published by the Free Software Foundation; either version 2 of the
12 *     License, or (at your option) any later version.
13 *
14 *     This library is distributed in the hope that it will be useful,
15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17 *     GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 *  b) Permission is hereby granted, free of charge, to any person
22 *     obtaining a copy of this software and associated documentation
23 *     files (the "Software"), to deal in the Software without
24 *     restriction, including without limitation the rights to use,
25 *     copy, modify, merge, publish, distribute, sublicense, and/or
26 *     sell copies of the Software, and to permit persons to whom the
27 *     Software is furnished to do so, subject to the following
28 *     conditions:
29 *
30 *     The above copyright notice and this permission notice shall be
31 *     included in all copies or substantial portions of the Software.
32 *
33 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 *     OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44
45#include "sun50i-a64.dtsi"
46
47#include <dt-bindings/gpio/gpio.h>
48
49/ {
50	model = "BananaPi-M64";
51	compatible = "sinovoip,bananapi-m64", "allwinner,sun50i-a64";
52
53	aliases {
54		serial0 = &uart0;
55		serial1 = &uart1;
56	};
57
58	chosen {
59		stdout-path = "serial0:115200n8";
60	};
61
62	reg_vcc3v3: vcc3v3 {
63		compatible = "regulator-fixed";
64		regulator-name = "vcc3v3";
65		regulator-min-microvolt = <3300000>;
66		regulator-max-microvolt = <3300000>;
67	};
68};
69
70&ehci1 {
71	status = "okay";
72};
73
74&emac {
75	pinctrl-names = "default";
76	pinctrl-0 = <&rgmii_pins>;
77	phy-mode = "rgmii";
78	phy-handle = <&ext_rgmii_phy>;
79	status = "okay";
80};
81
82&i2c1 {
83	pinctrl-names = "default";
84	pinctrl-0 = <&i2c1_pins>;
85	status = "okay";
86};
87
88&i2c1_pins {
89	bias-pull-up;
90};
91
92&mdio {
93	ext_rgmii_phy: ethernet-phy@1 {
94		compatible = "ethernet-phy-ieee802.3-c22";
95		reg = <1>;
96	};
97};
98
99&mmc0 {
100	pinctrl-names = "default";
101	pinctrl-0 = <&mmc0_pins>;
102	vmmc-supply = <&reg_vcc3v3>;
103	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
104	cd-inverted;
105	disable-wp;
106	bus-width = <4>;
107	status = "okay";
108};
109
110&mmc1 {
111	pinctrl-names = "default";
112	pinctrl-0 = <&mmc1_pins>;
113	vmmc-supply = <&reg_vcc3v3>;
114	bus-width = <4>;
115	non-removable;
116	status = "okay";
117};
118
119&mmc2 {
120	pinctrl-names = "default";
121	pinctrl-0 = <&mmc2_pins>;
122	vmmc-supply = <&reg_vcc3v3>;
123	bus-width = <8>;
124	non-removable;
125	cap-mmc-hw-reset;
126	status = "okay";
127};
128
129&ohci1 {
130	status = "okay";
131};
132
133&uart0 {
134	pinctrl-names = "default";
135	pinctrl-0 = <&uart0_pins_a>;
136	status = "okay";
137};
138
139&uart1 {
140	pinctrl-names = "default";
141	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
142	status = "okay";
143};
144
145&usbphy {
146	status = "okay";
147};
148