Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44 |
|
#
f1b3ddb3 |
| 04-Aug-2023 |
Andre Przywara <andre.przywara@arm.com> |
arm64: dts: allwinner: h616: Add OrangePi Zero 3 board support
The OrangePi Zero 3 is a development board based on the Allwinner H618 SoC, which seems to be just an H616 with more L2 cache. The boar
arm64: dts: allwinner: h616: Add OrangePi Zero 3 board support
The OrangePi Zero 3 is a development board based on the Allwinner H618 SoC, which seems to be just an H616 with more L2 cache. The board itself is a slightly updated version of the Orange Pi Zero 2. It features: - Four ARM Cortex-A53 cores, Mali-G31 MP2 GPU - 1/1.5/2/4 GiB LPDDR4 DRAM SKUs (only up to 1GB on the Zero2) - AXP313a PMIC (more capable AXP305 on the Zero2) - Raspberry-Pi-1 compatible GPIO header - extra 13 pin expansion header, exposing pins for 2x USB 2.0 ports - 1 USB 2.0 host port - 1 USB 2.0 type C port (power supply + OTG) - MicroSD slot - on-board 16MiB bootable SPI NOR flash (only 2MB on the Zero2) - 1Gbps Ethernet port (via Motorcomm YT8531 PHY) (RTL8211 on the Zero2) - micro-HDMI port - (yet) unsupported Allwinner WiFi/BT chip
Add the devicetree file describing the currently supported features, namely LEDs, SD card, PMIC, SPI flash, USB. Ethernet seems unstable at the moment, though the basic functionality works.
Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20230804170856.1237202-4-andre.przywara@arm.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
show more ...
|
Revision tags: v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54 |
|
#
2c1e6299 |
| 08-Jul-2022 |
Andre Przywara <andre.przywara@arm.com> |
arm64: dts: allwinner: h616: Add X96 Mate TV box support
The X96 Mate is an Allwinner H616 based TV box, featuring: - Four ARM Cortex-A53 cores, Mali-G31 MP2 GPU - 2GiB/4GiB RAM (fully usable!)
arm64: dts: allwinner: h616: Add X96 Mate TV box support
The X96 Mate is an Allwinner H616 based TV box, featuring: - Four ARM Cortex-A53 cores, Mali-G31 MP2 GPU - 2GiB/4GiB RAM (fully usable!) - 16/32/64GiB eMMC - 100Mbps Ethernet (via embedded AC200 EPHY, not yet supported) - Unsupported Allwinner WiFi chip - 2 x USB 2.0 host ports - HDMI port - IR receiver - 5V/2A DC power supply via barrel plug
Add a basic devicetree for it, with SD card and eMMC working, as well as serial and the essential peripherals, like the AXP PMIC.
This DT is somewhat minimal, and should work on many other similar TV boxes with the Allwinner H616 chip.
Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220708105235.3983266-8-andre.przywara@arm.com
show more ...
|
#
5a378f9f |
| 08-Jul-2022 |
Andre Przywara <andre.przywara@arm.com> |
arm64: dts: allwinner: h616: Add OrangePi Zero 2 board support
The OrangePi Zero 2 is a development board with the new H616 SoC. It comes with the following features: - Four ARM Cortex-A53 cores,
arm64: dts: allwinner: h616: Add OrangePi Zero 2 board support
The OrangePi Zero 2 is a development board with the new H616 SoC. It comes with the following features: - Four ARM Cortex-A53 cores, Mali-G31 MP2 GPU - 512MiB/1GiB DDR3 DRAM - AXP305 PMIC - Raspberry-Pi-1 compatible GPIO header - extra 13 pin expansion header, exposing pins for 2x USB 2.0 ports - 1 USB 2.0 host port - 1 USB 2.0 type C port (power supply + OTG) - MicroSD slot - on-board 2MiB bootable SPI NOR flash - 1Gbps Ethernet port (via RTL8211F PHY) - micro-HDMI port - (yet) unsupported Allwinner WiFi/BT chip
Add the devicetree file describing the currently supported features.
Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220708105235.3983266-7-andre.przywara@arm.com
show more ...
|
Revision tags: v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7 |
|
#
fa33ec51 |
| 01-Dec-2021 |
Jernej Skrabec <jernej.skrabec@gmail.com> |
arm64: dts: allwinner: h6: Add Tanix TX6 mini dts
Tanix TX6 mini is less capable version of Tanix TX6 although it comes with some features not present on Tanix TX6.
Basic specs: - H6 SoC - 2 GiB DD
arm64: dts: allwinner: h6: Add Tanix TX6 mini dts
Tanix TX6 mini is less capable version of Tanix TX6 although it comes with some features not present on Tanix TX6.
Basic specs: - H6 SoC - 2 GiB DDR3 RAM - HDMI - SPDIF - 2x USB - analogue audio - CVBS - SD card - IR remote - LED display - fast ethernet - XR819 wifi - 16 GiB eMMC
Currently supported features doesn't differ that much from Tanix TX6, but that will change soon.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
show more ...
|
Revision tags: v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39 |
|
#
9962cb9b |
| 16-May-2021 |
Chukun Pan <amadeus@jmu.edu.cn> |
arm64: dts: allwinner: h5: Add NanoPi R1S H5 support
The NanoPi R1S H5 is a open source board made by FriendlyElec. It has the following features:
- Allwinner H5, Quad-core Cortex-A53 - 512MB DDR3
arm64: dts: allwinner: h5: Add NanoPi R1S H5 support
The NanoPi R1S H5 is a open source board made by FriendlyElec. It has the following features:
- Allwinner H5, Quad-core Cortex-A53 - 512MB DDR3 RAM - 10/100/1000M Ethernet x 2 - RTL8189ETV WiFi 802.11b/g/n - USB 2.0 host port (A) - MicroSD Slot - Serial Debug Port - 5V 2A DC power-supply
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210516163523.9484-2-amadeus@jmu.edu.cn
show more ...
|
Revision tags: v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14 |
|
#
7fa40ca7 |
| 23-Dec-2020 |
Icenowy Zheng <icenowy@aosc.io> |
arm64: allwinner: dts: a64: add DT for Early Adopter's PineTab
PineTabs since Early Adopter batch will use a new LCD panel.
Add device tree for PineTab with the new panel.
Signed-off-by: Icenowy Z
arm64: allwinner: dts: a64: add DT for Early Adopter's PineTab
PineTabs since Early Adopter batch will use a new LCD panel.
Add device tree for PineTab with the new panel.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20201224024001.19248-2-icenowy@aosc.io
show more ...
|
Revision tags: v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54 |
|
#
95c83906 |
| 24-Jul-2020 |
Yangtao Li <frank@allwinnertech.com> |
arm64: allwinner: A100: add support for Allwinner Perf1 board
A100 perf1 is an Allwinner A100-based SBC, with the following features:
- 1GiB DDR3 DRAM - AXP803 PMIC - 2 USB 2.0 ports - MicroSD slot
arm64: allwinner: A100: add support for Allwinner Perf1 board
A100 perf1 is an Allwinner A100-based SBC, with the following features:
- 1GiB DDR3 DRAM - AXP803 PMIC - 2 USB 2.0 ports - MicroSD slot and on-board eMMC module - on-board Nand flash - ···
Adds initial support for it, including UART and PMU.
Signed-off-by: Yangtao Li <frank@allwinnertech.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/30f4a3fc6ac84d05094e2c3b89d1dddc8ff6b7fc.1595572867.git.frank@allwinnertech.com
show more ...
|
Revision tags: v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51 |
|
#
e53568ca |
| 03-Jul-2020 |
Ondrej Jirman <megous@megous.com> |
arm64: dts: allwinner: Add support for PinePhone revision 1.2
Revision 1.2 should be the final production version of the PinePhone. It has most of the known HW quirks fixed.
Interrupt to the magnet
arm64: dts: allwinner: Add support for PinePhone revision 1.2
Revision 1.2 should be the final production version of the PinePhone. It has most of the known HW quirks fixed.
Interrupt to the magnetometer is routed correctly, in this revision.
The bulk of the changes are in how modem and the USB-C HDMI bridge chip is powered and where the signals from the modem are connected.
Also backlight intensity seemingly behaves differently, than on the 1.1 and 1.0 boards, and the PWM duty cycle where backlight starts to work is 10% (as tested on 2 1.2 PinePhones I have access to).
Signed-off-by: Ondrej Jirman <megous@megous.com> Link: https://lore.kernel.org/r/20200703194842.111845-3-megous@megous.com Signed-off-by: Maxime Ripard <maxime@cerno.tech>
show more ...
|
Revision tags: v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23 |
|
#
91f480d4 |
| 26-Feb-2020 |
Ondrej Jirman <megous@megous.com> |
arm64: dts: allwinner: Add initial support for Pine64 PinePhone
At the moment PinePhone comes in two slightly incompatible variants:
- 1.0: Early Developer Batch - 1.1: Braveheart Batch
There will
arm64: dts: allwinner: Add initial support for Pine64 PinePhone
At the moment PinePhone comes in two slightly incompatible variants:
- 1.0: Early Developer Batch - 1.1: Braveheart Batch
There will be at least one more incompatible variant in the very near future, so let's start by sharing the dtsi among multiple variants, right away, even though the HW description doesn't yet include the different bits.
The differences between 1.0 and 1.1 are: change in pins that control the flash LED, differences in modem power status signal routing, and maybe some other subtler things, that have not been determined yet.
This is a basic DT that includes only features that are already supported by mainline drivers.
Co-developed-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Co-developed-by: Martijn Braam <martijn@brixit.nl> Signed-off-by: Martijn Braam <martijn@brixit.nl> Co-developed-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bhushan Shah <bshah@kde.org> Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
show more ...
|
Revision tags: v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13 |
|
#
674ef1d0 |
| 15-Jan-2020 |
Icenowy Zheng <icenowy@aosc.io> |
arm64: dts: allwinner: a64: add support for PineTab
PineTab is a 10.1" tablet by Pine64 with Allwinner A64 inside.
It includes the following peripherals:
USB: - A microUSB Type-B port connected to
arm64: dts: allwinner: a64: add support for PineTab
PineTab is a 10.1" tablet by Pine64 with Allwinner A64 inside.
It includes the following peripherals:
USB: - A microUSB Type-B port connected to the OTG-capable USB PHY of Allwinner A64. The ID pin is connected to a GPIO of the A64 SoC, and the Vbus is connected to the Vbus of AXP803 PMIC. These enables OTG functionality on this port. - A USB Type-A port is connected to the internal hub attached to the non-OTG USB PHY of Allwinner A64. - There are reserved pins for an external keyboard connected to the internal hub.
Power: - The microUSB port has its Vbus connected to AXP803, mentioned above. - A DC jack (of a strange size, 2.5mm outer diameter) is connected to the ACIN of AXP803. - A Li-Polymer battery is connected to the battery pins of AXP803.
Storage: - An tradition Pine64 eMMC slot is on the board, mounted with an eMMC module by factory. - An external microSD slot is hidden under a protect case.
Display: - A MIPI-DSI LCD panel (800x1280) is connected to the DSI port of A64 SoC. - A mini HDMI port.
Input: - A touch panel attached to a Goodix GT9271 touch controller. - Volume keys connected to the LRADC of the A64 SoC.
Camera: - An OV5640 CMOS camera is at rear, connected to the CSI bus of A64 SoC. - A GC2145 CMOS camera is at front, shares the same CSI bus with OV5640.
Audio: - A headphone jack is conencted to the SoC's internal codec. - A speaker connected is to the Line Out port of SoC's internal codec, via an amplifier.
Misc: - Debug UART is muxed with the headphone jack, with the switch next to the microSD slot. - A bosch BMA223 accelerometer is connected to the I2C bus of A64 SoC. - Wi-Fi and Bluetooth are available via a RTL8723CS chip, similar to the one in Pinebook.
This commit adds a basically usable device tree for it, implementing most of the features mentioned above. HDMI is not supported now because bad LCD-HDMI coexistence situation of mainline A64 display driver, the front camera currently lacks a driver and a facility to share the bus with the rear one, and the accelerometer currently lacks a DT binding.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
show more ...
|
Revision tags: v5.4.12, v5.4.11, v5.4.10, v5.4.9 |
|
#
60d0426d |
| 06-Jan-2020 |
Chen-Yu Tsai <wens@csie.org> |
arm64: dts: allwinner: h5: Add Libre Computer ALL-H5-CC H5 board
The Libre Computer ALL-H5-CC board is an upgraded version of the ALL-H3-CC. Changes include:
- Gigabit Ethernet via external RTL82
arm64: dts: allwinner: h5: Add Libre Computer ALL-H5-CC H5 board
The Libre Computer ALL-H5-CC board is an upgraded version of the ALL-H3-CC. Changes include:
- Gigabit Ethernet via external RTL8211E Ethernet PHY - 16 MiB SPI NOR flash memory - PoE tap header - Line out jack removed
Only H5 variant test samples were made available, and the vendor is not certain whether other SoC variants would be made or not. Furthermore the board is a minor upgrade compared to the ALL-H3-CC. Thus the device tree simply includes the one for the ALL-H3-CC, and adds the changes on top.
Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
show more ...
|
Revision tags: v5.4.8, v5.4.7 |
|
#
1b27080a |
| 24-Dec-2019 |
Chen-Yu Tsai <wens@csie.org> |
ARM: dts: sunxi: Add Libre Computer ALL-H3-IT H5 board
The Libre Computer ALL-H3-IT board is a small single board computer that is roughly the same size as the Raspberry Pi Zero, or around 20% small
ARM: dts: sunxi: Add Libre Computer ALL-H3-IT H5 board
The Libre Computer ALL-H3-IT board is a small single board computer that is roughly the same size as the Raspberry Pi Zero, or around 20% smaller than a credit card.
The board features:
- H2, H3, or H5 SoC from Allwinner - 2 DDR3 DRAM chips - Realtek RTL8821CU based WiFi module - 128 Mbit SPI-NOR flash - micro-SD card slot - micro HDMI video output - FPC connector for camera sensor module - generic Raspberri-Pi style 40 pin GPIO header - additional pin headers for extra USB host ports, ananlog audio and IR receiver
Only H5 variant test samples were made available, but the vendor does have plans to include at least an H3 variant. Thus the device tree is split much like the ALL-H3-CC, with a common dtsi file for the board design, and separate dts files including the common board file and the SoC dtsi file. The other variants will be added as they are made available.
Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
show more ...
|
Revision tags: v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12 |
|
#
f33a9117 |
| 14-Nov-2019 |
Corentin Labbe <clabbe@baylibre.com> |
arm64: dts: allwinner: add pineh64 model B
This patch adds the model B of the PineH64. The model B is smaller than the pine64 model A and has no PCIE slot.
The only devicetree difference with the p
arm64: dts: allwinner: add pineh64 model B
This patch adds the model B of the PineH64. The model B is smaller than the pine64 model A and has no PCIE slot.
The only devicetree difference with the pineH64 model A, is the PHY regulator and the HDMI connector node.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
show more ...
|
Revision tags: v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10 |
|
#
94f68f3a |
| 21-Aug-2019 |
Sunil Mohan Adapa <sunil@medhas.org> |
arm64: dts: allwinner: a64: Add A64 OlinuXino board (with eMMC)
A64 OLinuXino board from Olimex has three variants with onboard eMMC: A64-OLinuXino-1Ge16GW, A64-OLinuXino-1Ge4GW and A64-OLinuXino-2G
arm64: dts: allwinner: a64: Add A64 OlinuXino board (with eMMC)
A64 OLinuXino board from Olimex has three variants with onboard eMMC: A64-OLinuXino-1Ge16GW, A64-OLinuXino-1Ge4GW and A64-OLinuXino-2Ge8G-IND. In addition, there are two variants without eMMC. One without eMMC and one with SPI flash. This suggests the need for separate device tree for the three eMMC variants.
This patch has been tested on A64-OLinuXino-1Ge16GW with Linux 5.0 from Debain. Basic benchmarks using Flexible IO Tester show reasonable performance from the eMMC.
eMMC - Random Write: 21.3MiB/s eMMC - Sequential Write: 68.2MiB/s SD Card - Random Write: 1690KiB/s SD Card - Sequential Write: 11.0MiB/s
Changes:
v3: Separate dts for eMMC variants
v2: Fix descriptions for VCC and VCCQ
Link: https://github.com/armbian/build/commit/174953de1eb09e6aa1ef7075066b573dba625398 Signed-off-by: Martin Ayotte <martinayotte@gmail.com> [sunil@medhas.org Fix descriptions for VCC and VCCQ, separate dts for eMMC] Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org> Tested-by: Sunil Mohan Adapa <sunil@medhas.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
show more ...
|
#
652a458e |
| 16-Aug-2019 |
Jernej Skrabec <jernej.skrabec@siol.net> |
arm64: dts: allwinner: h6: Introduce Tanix TX6 board
Tanix TX6 is an Allwinner H6 based TV box, which supports: - Allwinner H6 Quad-core 64-bit ARM Cortex-A53 - GPU Mali-T720 - 4GiB DDR3 RAM (3GiB u
arm64: dts: allwinner: h6: Introduce Tanix TX6 board
Tanix TX6 is an Allwinner H6 based TV box, which supports: - Allwinner H6 Quad-core 64-bit ARM Cortex-A53 - GPU Mali-T720 - 4GiB DDR3 RAM (3GiB useable) - 100Mbps EMAC via AC200 EPHY - Cdtech 47822BS Wifi/BT - 2x USB 2.0 Host and 1x USB 3.0 Host - HDMI port - IR receiver - 64GiB eMMC - 5V/2A DC power supply
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
show more ...
|
Revision tags: v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8 |
|
#
8fe62f12 |
| 08-Apr-2019 |
Ondrej Jirman <megous@megous.com> |
arm64: dts: allwinner: h6: Add Orange Pi 3 DTS
Orange Pi 3 is a H6 based SBC made by Xulong, released in January 2019. It has the following features:
- Allwinner H6 quad-core 64-bit ARM Cortex-A53
arm64: dts: allwinner: h6: Add Orange Pi 3 DTS
Orange Pi 3 is a H6 based SBC made by Xulong, released in January 2019. It has the following features:
- Allwinner H6 quad-core 64-bit ARM Cortex-A53 - GPU Mali-T720 - 1GB or 2GB LPDDR3 RAM - AXP805 PMIC - AP6256 Wifi/BT 5.0 - USB 2.0 host port (A) - USB 2.0 micro usb, OTG - USB 3.0 Host + 4 port USB hub (GL3510) - Gigabit Ethernet (Realtek RTL8211E phy) - HDMI 2.0 port - soldered eMMC (optional) - 3x LED (one is on the bottom) - microphone - audio jack - PCIe
Add basic support for the board.
Signed-off-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
show more ...
|
#
089bee8d |
| 08-Apr-2019 |
Clément Péron <peron.clem@gmail.com> |
arm64: dts: allwinner: h6: Introduce Beelink GS1 board
Beelink GS1 is an Allwinner H6 based TV box, which support: - Allwinner H6 Quad-core 64-bit ARM Cortex-A53 - GPU Mali-T720 - 2GB LPDDR3 RAM - A
arm64: dts: allwinner: h6: Introduce Beelink GS1 board
Beelink GS1 is an Allwinner H6 based TV box, which support: - Allwinner H6 Quad-core 64-bit ARM Cortex-A53 - GPU Mali-T720 - 2GB LPDDR3 RAM - AXP805 PMIC - 1Gbps GMAC via RTL8211E - FN-Link 6222B-SRB Wifi/BT - 1x USB 2.0 Host and 1x USB 3.0 Host - HDMI port - S/PDIF Tx - IR receiver - 5V/2A DC power supply
Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
show more ...
|
Revision tags: v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1 |
|
#
00f7980a |
| 06-Mar-2019 |
Jagan Teki <jagan@amarulasolutions.com> |
arm64: allwinner: a64: Add Oceanic 5205 5inMFD initial support
Oceanic 5205 5inMFD is a 5 inch Multi function display baseboard designed to mount SoPine SOM.
Key features: - Allwinner A64 Cortex-A5
arm64: allwinner: a64: Add Oceanic 5205 5inMFD initial support
Oceanic 5205 5inMFD is a 5 inch Multi function display baseboard designed to mount SoPine SOM.
Key features: - Allwinner A64 Cortex-A53 - Mali-400MP2 GPU - AXP803 PMIC - 2GB DDR3 RAM - SD Slot - SPI-NOR flash - EMAC, RTL8211E - MCP2515 CAN - 4-lane, MIPI-DSI panel - Goodix 911 CTP - USB Host - 12V DC power supply
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
show more ...
|
Revision tags: v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18 |
|
#
cee98cef |
| 05-Nov-2018 |
Jagan Teki <jagan@openedev.com> |
arm64: allwinner: h6: Add OrangePi Lite2 initial support
OrangePi Lite2 is Allwinner H6 based open-source SBC, which support: - Allwinner H6 Quad-core 64-bit ARM Cortex-A53 - GPU Mali-T720 - 1GB LPD
arm64: allwinner: h6: Add OrangePi Lite2 initial support
OrangePi Lite2 is Allwinner H6 based open-source SBC, which support: - Allwinner H6 Quad-core 64-bit ARM Cortex-A53 - GPU Mali-T720 - 1GB LPDDR3 RAM - AXP805 PMIC - AP6356S Wifi/BT - USB 2.0, USB 3.0 Host, OTG - HDMI port - 5V/2A DC power supply
Signed-off-by: Jagan Teki <jagan@openedev.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
show more ...
|
Revision tags: v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15 |
|
#
8fb3d7de |
| 15-Oct-2018 |
Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com> |
arm64: dts: allwinner: new board - Emlid Neutis N5
Emlid Neutis N5 is a SoM based on Allwinner H5, has a WiFi & BT module, DDR3 RAM and eMMC.
- add neutis n5 dtsi file for SoM needs - add neutis de
arm64: dts: allwinner: new board - Emlid Neutis N5
Emlid Neutis N5 is a SoM based on Allwinner H5, has a WiFi & BT module, DDR3 RAM and eMMC.
- add neutis n5 dtsi file for SoM needs - add neutis devboard dts file - add neutis devboard target to dtb makefile
Signed-off-by: Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
show more ...
|
Revision tags: v4.18.14, v4.18.13, v4.18.12, v4.18.11 |
|
#
6eeb4180 |
| 26-Sep-2018 |
Chen-Yu Tsai <wens@csie.org> |
ARM: dts: sunxi: h3-h5: Add Bananapi M2+ v1.2 device trees
Bananapi released an updated revision of the H3/H5 based Bananapi M2+. Version 1.2 enables voltage control for the CPU's regulator by using
ARM: dts: sunxi: h3-h5: Add Bananapi M2+ v1.2 device trees
Bananapi released an updated revision of the H3/H5 based Bananapi M2+. Version 1.2 enables voltage control for the CPU's regulator by using a GPIO line to toggle a MOSFET that can change the effective resistance value in the regulator's feedback network.
This patch adds a common .dtsi file for this new revision, which includes the original common sunxi-bananapi-m2-plus.dtsi file, and adds the GPIO-controlled regulator and a cpu-supply reference. H3 and H5 variant dts files are added as well.
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
show more ...
|
Revision tags: v4.18.10, v4.18.9, v4.18.7, v4.18.6 |
|
#
80c21c8c |
| 30-Aug-2018 |
Chen-Yu Tsai <wens@csie.org> |
arm64: dts: allwinner: h5: Add device tree for Bananapi M2 Plus H5
The Bananapi M2 Plus H5 is a variant of the original Bananapi M2 Plus, with the H3 SoC replaced with an H5. Everything else is the
arm64: dts: allwinner: h5: Add device tree for Bananapi M2 Plus H5
The Bananapi M2 Plus H5 is a variant of the original Bananapi M2 Plus, with the H3 SoC replaced with an H5. Everything else is the same.
Add a stub device tree incorporating the shared bananapi-m2-plus dtsi file.
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
show more ...
|
Revision tags: v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12 |
|
#
0b1ea6f3 |
| 28-Jul-2018 |
Jagan Teki <jagan@amarulasolutions.com> |
arm64: dts: allwinner: h6: Add OrangePi One Plus initial support
OrangePi One Plus is Allwinner H6 based open-source SBC, which support: - Allwinner H6 Quad-core 64-bit ARM Cortex-A53 - GPU Mali-T72
arm64: dts: allwinner: h6: Add OrangePi One Plus initial support
OrangePi One Plus is Allwinner H6 based open-source SBC, which support: - Allwinner H6 Quad-core 64-bit ARM Cortex-A53 - GPU Mali-T720 - 1GB LPDDR3 RAM - AXP805 PMIC - 1Gbps GMAC via RTL8211 - USB 2.0 Host, OTG - HDMI port - 5V/2A DC power supply
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
show more ...
|
#
b3ee15a5 |
| 30-Jul-2018 |
Andre Przywara <andre.przywara@arm.com> |
arm64: dts: allwinner: a64: Add Pine64-LTS device tree file
The Pine64-LTS is a variant of the Pine64 board, from the software visible side resembling a SoPine module on a baseboard, though the boar
arm64: dts: allwinner: a64: Add Pine64-LTS device tree file
The Pine64-LTS is a variant of the Pine64 board, from the software visible side resembling a SoPine module on a baseboard, though the board has the SoC and DRAM integrated on one PCB. Due to this it basically shares the DT with the SoPine baseboard, which we mimic in our DT by inclucing the boardboard .dts into the new file, just overwriting the model name. Having a separate .dts for this seems useful, since we don't know yet if there are subtle differences between the two. Also the SoC on the LTS board is technically an "R18" instead of the original "A64", although as far as we know this is just a relabelled version of the original SoC.
Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
show more ...
|
Revision tags: v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1 |
|
#
df35fbcf |
| 06-Jun-2018 |
Icenowy Zheng <icenowy@aosc.io> |
arm64: dts: allwinner: add support for Pinebook
Pinebook is a A64-based laptop produced by Pine64, with the following peripherals:
USB: - Two external USB ports (one is directly connected to A64's
arm64: dts: allwinner: add support for Pinebook
Pinebook is a A64-based laptop produced by Pine64, with the following peripherals:
USB: - Two external USB ports (one is directly connected to A64's OTG controller, the other is under a internal hub connected to the host-only controller.) - USB HID keyboard and touchpad connected to the internal hub. - USB UVC camera connected to the internal hub.
Power-related: - A DC IN jack connected to AXP803's DCIN pin. - A Li-Polymer battery connected to AXP803's battery pins.
Storage: - An eMMC by Foresee on the main board (in the product revision of the main board it's designed to be switchable). - An external MicroSD card slot.
Display: - An eDP LCD panel (1366x768) connected via an ANX6345 RGB-eDP bridge. - A mini HDMI port.
Misc: - A Hall sensor designed to detect the status of lid, connected to GPIO PL12. - A headphone jack connected to the SoC's internal codec. - A debug UART port muxed with headphone jack.
This commit adds basical support for it.
[vasily: squashed several commits into one, added simplefb node, added usbphy to ehci0 and ohci0 nodes and other cosmetic changes to dts]
Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
show more ...
|