kbuild: prefix $(srctree)/ to some included Makefiles

VPATH is used in Kbuild to make pattern rules search for prerequisites
in both $(objtree) and $(srctree). Some of *.c, *.S files are not real
so

kbuild: prefix $(srctree)/ to some included Makefiles

VPATH is used in Kbuild to make pattern rules search for prerequisites
in both $(objtree) and $(srctree). Some of *.c, *.S files are not real
sources, but generated by tools such as flex, bison, perl.

In contrast, I doubt the benefit of --include-dir=$(abs_srctree) because
it is always clear which Makefiles are real sources, and which are not.

So, my hope is to add $(srctree)/ prefix to all check-in Makefiles,
then remove --include-dir=$(abs_srctree) flag in the future.

I am touching only some Kbuild core parts for now. Treewide fixes will
be needed to achieve this goal.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

show more ...

kbuild: move headers_check rule to usr/include/Makefile

Currently, some sanity checks for uapi headers are done by
scripts/headers_check.pl, which is wired up to the 'headers_check'
target in the to

kbuild: move headers_check rule to usr/include/Makefile

Currently, some sanity checks for uapi headers are done by
scripts/headers_check.pl, which is wired up to the 'headers_check'
target in the top Makefile.

It is true compiling headers has better test coverage, but there
are still several headers excluded from the compile test. I like
to keep headers_check.pl for a while, but we can delete a lot of
code by moving the build rule to usr/include/Makefile.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

kbuild: fix 'No such file or directory' warning for headers_install

Since commit d5470d14431e ("kbuild: re-implement Makefile.headersinst
without recursion"), headers_install emits an ugly warning.

kbuild: fix 'No such file or directory' warning for headers_install

Since commit d5470d14431e ("kbuild: re-implement Makefile.headersinst
without recursion"), headers_install emits an ugly warning.

$ make headers_install
[ snip ]
UPD include/generated/uapi/linux/version.h
find: ‘./include/uapi/Kbuild’: No such file or directory
HDRINST usr/include/video/uvesafb.h
...

This happens for GNU Make <= 4.2.1

When I wrote that commit, I missed this warning because I was using the
state-of-the-art Make version compiled from the git tree.

$(wildcard $(src)/*/) is intended to match to only existing directories
since it has a trailing slash, but actually matches to regular files too.
(include/uapi/Kbuild in this case)

This is a bug of GNU Make, and was fixed by:

| commit b7acb10e86dc8f5fdf2a2bbd87e1059c315e31d6
| Author: spagoveanu@gmail.com <spagoveanu@gmail.com>
| Date: Wed Jun 20 02:03:48 2018 +0300
|
| * src/dir.c: Preserve glob d_type field

We need to cater to old Make versions. Add '$(filter %/,...) to filter
out the regular files.

Fixes: d5470d14431e ("kbuild: re-implement Makefile.headersinst without recursion")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

kbuild: simplify scripts/headers_install.sh

Now that headers_install.sh is invoked per file, remove the for-loop
in the shell script.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

kbuild: re-implement Makefile.headersinst without recursion

Since commit fcc8487d477a ("uapi: export all headers under uapi
directories"), the headers in uapi directories are all exported by
default

kbuild: re-implement Makefile.headersinst without recursion

Since commit fcc8487d477a ("uapi: export all headers under uapi
directories"), the headers in uapi directories are all exported by
default although exceptional cases are still allowed by the syntax
'no-export-headers'.

The traditional directory descending has been kept (in a somewhat
hacky way), but it is actually unneeded.

Get rid of it to simplify the code.

Also, handle files one by one instead of the previous per-directory
processing. This will emit much more log, but I like it.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

kbuild: add 'headers' target to build up uapi headers in usr/include

In Linux build system, build targets and installation targets are
separated.

Examples are:

- 'make vmlinux' -> 'make install'

kbuild: add 'headers' target to build up uapi headers in usr/include

In Linux build system, build targets and installation targets are
separated.

Examples are:

- 'make vmlinux' -> 'make install'
- 'make modules' -> 'make modules_install'
- 'make dtbs' -> 'make dtbs_install'
- 'make vdso' -> 'make vdso_install'

The intention is to run the build targets under the normal privilege,
then the installation targets under the root privilege since we need
the write permission to the system directories.

We have 'make headers_install' but the corresponding 'make headers'
stage does not exist. The purpose of headers_install is to provide
the kernel interface to C library. So, nobody would try to install
headers to /usr/include directly.

If 'sudo make INSTALL_HDR_PATH=/usr/include headers_install' were run,
some build artifacts in the kernel tree would be owned by root because
some of uapi headers are generated by 'uapi-asm-generic', 'archheaders'
targets.

Anyway, I believe it makes sense to split the header installation into
two stages.

[1] 'make headers'
Process headers in uapi directories by scripts/headers_install.sh
and copy them to usr/include

[2] 'make headers_install'
Copy '*.h' verbatim from usr/include to $(INSTALL_HDR_PATH)/include

For the backward compatibility, 'headers_install' depends on 'headers'.

Some samples expect uapi headers in usr/include. So, the 'headers'
target is useful to build up them in the fixed location usr/include
irrespective of INSTALL_HDR_PATH.

Another benefit is to stop polluting the final destination with the
time-stamp files '.install' and '.check'. Maybe you can see them in
your toolchains.

Lastly, my main motivation is to prepare for compile-testing uapi
headers. To build something, we have to save an object and .*.cmd
somewhere. The usr/include/ will be the work directory for that.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

kbuild: generate asm-generic wrappers if mandatory headers are missing

Some time ago, Sam pointed out a certain degree of overwrap between
generic-y and mandatory-y. (https://lkml.org/lkml/2017/7/10

kbuild: generate asm-generic wrappers if mandatory headers are missing

Some time ago, Sam pointed out a certain degree of overwrap between
generic-y and mandatory-y. (https://lkml.org/lkml/2017/7/10/121)

I tweaked the meaning of mandatory-y a little bit; now it defines the
minimum set of ASM headers that all architectures must have.

If arch does not have specific implementation of a mandatory header,
Kbuild will let it fallback to the asm-generic one by automatically
generating a wrapper. This will allow to drop lots of redundant
generic-y defines.

Previously, "mandatory" was used in the context of UAPI, but I guess
this can be extended to kernel space ASM headers.

Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>

show more ...

kbuild: remove a special handling for *.agh in Makefile.headersinst

scripts/Makefile.headersinst takes care of *.agh just for

arch/cris/include/uapi/arch-v10/arch/sv_addr.agh

because renaming ex

kbuild: remove a special handling for *.agh in Makefile.headersinst

scripts/Makefile.headersinst takes care of *.agh just for

arch/cris/include/uapi/arch-v10/arch/sv_addr.agh

because renaming exported headers is difficult (or impossible).

This code is no longer necessary thanks to commit c690eddc2f3b ("CRIS:
Drop support for the CRIS port").

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

kbuild: specify FORCE in Makefile.headersinst as .PHONY target

Swap the order of ".PHONY: $(PHONY)" and "PHONY += FORCE"
so that FORCE is correctly specified as a .PHONY target.

Use a preferred way

kbuild: specify FORCE in Makefile.headersinst as .PHONY target

Swap the order of ".PHONY: $(PHONY)" and "PHONY += FORCE"
so that FORCE is correctly specified as a .PHONY target.

Use a preferred way for specifying $(subdirs) as .PHONY targets.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

kbuild: remove redundant $(wildcard ...) for cmd_files calculation

I do not see any reason why $(wildcard ...) needs to be called twice
for computing cmd_files. Remove the first one.

Signed-off-by

kbuild: remove redundant $(wildcard ...) for cmd_files calculation

I do not see any reason why $(wildcard ...) needs to be called twice
for computing cmd_files. Remove the first one.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

kbuild: replace $(hdr-arch) with $(SRCARCH)

Since commit 5e53879008b9 ("sparc,sparc64: unify Makefile"), hdr-arch
and SRCARCH always match.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext

kbuild: replace $(hdr-arch) with $(SRCARCH)

Since commit 5e53879008b9 ("sparc,sparc64: unify Makefile"), hdr-arch
and SRCARCH always match.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>

show more ...

kbuild: remove wrapper files handling from Makefile.headersinst

scripts/Makefike.headersinst creates asm-generic wrappers by itself
because scripts/Makefile.asm-generic created some of exported wrap

kbuild: remove wrapper files handling from Makefile.headersinst

scripts/Makefike.headersinst creates asm-generic wrappers by itself
because scripts/Makefile.asm-generic created some of exported wrappers
outside uapi directories.

Now this distortion has been fixed. scripts/Makefile.headersinst can
simply copy wrappers created by scripts/Makefile.asm-generic.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

kbuild: do not include old-kbuild-file from Makefile.headersinst

Now asm-generic wrappers to be exported are all listed in
arch/*/include/uapi/asm/Kbuild. "make headers_install" no longer
depends o

kbuild: do not include old-kbuild-file from Makefile.headersinst

Now asm-generic wrappers to be exported are all listed in
arch/*/include/uapi/asm/Kbuild. "make headers_install" no longer
depends on any Kbuild files outside uapi directories.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

kbuild: pass dst= to Makefile.headersinst from top Makefile

We can always pass dst= from the top Makefile. This will simplify
the logic in Makefile.headersinst.

Signed-off-by: Masahiro Yamada <yam

kbuild: pass dst= to Makefile.headersinst from top Makefile

We can always pass dst= from the top Makefile. This will simplify
the logic in Makefile.headersinst.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

kbuild: remove useless $(gen) variable in Makefile.headersinst

We have no true case for the $(if $(gen), ...) conditional. Drop it
to simplify the gendir calculation.

Signed-off-by: Masahiro Yamad

kbuild: remove useless $(gen) variable in Makefile.headersinst

We have no true case for the $(if $(gen), ...) conditional. Drop it
to simplify the gendir calculation.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

kbuild: fix header installation under fakechroot environment

Since commit fcc8487d477a ("uapi: export all headers under uapi
directories") fakechroot make bindeb-pkg fails, mismatching files for
dir

kbuild: fix header installation under fakechroot environment

Since commit fcc8487d477a ("uapi: export all headers under uapi
directories") fakechroot make bindeb-pkg fails, mismatching files for
directories:
touch: cannot touch 'usr/include/video/uvesafb.h/.install': Not a
directory

This due to a bug in fakechroot:
when using the function $(wildcard $(srcdir)/*/.) in a makefile, under a
fakechroot environment, not only directories but also files are
returned.

To circumvent that, we are using the functions:
$(sort $(dir $(wildcard $(srcdir)/*/))))

Fixes: fcc8487d477a ("uapi: export all headers under uapi directories")
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

kbuild: skip install/check of headers right under uapi directories

Since commit 61562f981e92 ("uapi: export all arch specifics
directories"), "make INSTALL_HDR_PATH=$root/usr headers_install"
delete

kbuild: skip install/check of headers right under uapi directories

Since commit 61562f981e92 ("uapi: export all arch specifics
directories"), "make INSTALL_HDR_PATH=$root/usr headers_install"
deletes standard glibc headers and others in $(root)/usr/include.

The cause of the issue is that headers_install now starts descending
from arch/$(hdr-arch)/include/uapi with $(root)/usr/include for its
destination when installing asm headers. So, headers already there
are assumed to be unwanted.

When headers_install starts descending from include/uapi with
$(root)/usr/include for its destination, it works around the problem
by creating an dummy destination $(root)/usr/include/uapi, but this
is tricky.

To fix the problem in a clean way is to skip headers install/check
in include/uapi and arch/$(hdr-arch)/include/uapi because we know
there are only sub-directories in uapi directories. A good side
effect is the empty destination $(root)/usr/include/uapi will go
away.

I am also removing the trailing slash in the headers_check target to
skip checking in arch/$(hdr-arch)/include/uapi.

Fixes: 61562f981e92 ("uapi: export all arch specifics directories")
Reported-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>

show more ...

uapi: export all arch specifics directories

This patch removes the need of subdir-y. Now all files/directories under
arch/<arch>/include/uapi/ are exported.

The only change for userland is the layo

uapi: export all arch specifics directories

This patch removes the need of subdir-y. Now all files/directories under
arch/<arch>/include/uapi/ are exported.

The only change for userland is the layout of the command 'make
headers_install_all': directories asm-<arch> are replaced by arch-<arch>/.
Those new directories contains all files/directories of the specified arch.

Note that only cris and tile have more directories than only asm:
- arch-v[10|32] for cris;
- arch for tile.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

uapi: export all headers under uapi directories

Regularly, when a new header is created in include/uapi/, the developer
forgets to add it in the corresponding Kbuild file. This error is usually
dete

uapi: export all headers under uapi directories

Regularly, when a new header is created in include/uapi/, the developer
forgets to add it in the corresponding Kbuild file. This error is usually
detected after the release is out.

In fact, all headers under uapi directories should be exported, thus it's
useless to have an exhaustive list.

After this patch, the following files, which were not exported, are now
exported (with make headers_install_all):
asm-arc/kvm_para.h
asm-arc/ucontext.h
asm-blackfin/shmparam.h
asm-blackfin/ucontext.h
asm-c6x/shmparam.h
asm-c6x/ucontext.h
asm-cris/kvm_para.h
asm-h8300/shmparam.h
asm-h8300/ucontext.h
asm-hexagon/shmparam.h
asm-m32r/kvm_para.h
asm-m68k/kvm_para.h
asm-m68k/shmparam.h
asm-metag/kvm_para.h
asm-metag/shmparam.h
asm-metag/ucontext.h
asm-mips/hwcap.h
asm-mips/reg.h
asm-mips/ucontext.h
asm-nios2/kvm_para.h
asm-nios2/ucontext.h
asm-openrisc/shmparam.h
asm-parisc/kvm_para.h
asm-powerpc/perf_regs.h
asm-sh/kvm_para.h
asm-sh/ucontext.h
asm-tile/shmparam.h
asm-unicore32/shmparam.h
asm-unicore32/ucontext.h
asm-x86/hwcap2.h
asm-xtensa/kvm_para.h
drm/armada_drm.h
drm/etnaviv_drm.h
drm/vgem_drm.h
linux/aspeed-lpc-ctrl.h
linux/auto_dev-ioctl.h
linux/bcache.h
linux/btrfs_tree.h
linux/can/vxcan.h
linux/cifs/cifs_mount.h
linux/coresight-stm.h
linux/cryptouser.h
linux/fsmap.h
linux/genwqe/genwqe_card.h
linux/hash_info.h
linux/kcm.h
linux/kcov.h
linux/kfd_ioctl.h
linux/lightnvm.h
linux/module.h
linux/nbd-netlink.h
linux/nilfs2_api.h
linux/nilfs2_ondisk.h
linux/nsfs.h
linux/pr.h
linux/qrtr.h
linux/rpmsg.h
linux/sched/types.h
linux/sed-opal.h
linux/smc.h
linux/smc_diag.h
linux/stm.h
linux/switchtec_ioctl.h
linux/vfio_ccw.h
linux/wil6210_uapi.h
rdma/bnxt_re-abi.h

Note that I have removed from this list the files which are generated in every
exported directories (like .install or .install.cmd).

Thanks to Julien Floret <julien.floret@6wind.com> for the tip to get all
subdirs with a pure makefile command.

For the record, note that exported files for asm directories are a mix of
files listed by:
- include/uapi/asm-generic/Kbuild.asm;
- arch/<arch>/include/uapi/asm/Kbuild;
- arch/<arch>/include/asm/Kbuild.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Mark Salter <msalter@redhat.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

Makefile.headersinst: remove destination-y option

This option was added in commit c7bb349e7c25 ("kbuild: introduce destination-y
for exported headers") but never used in-tree.

Signed-off-by: Nicola

Makefile.headersinst: remove destination-y option

This option was added in commit c7bb349e7c25 ("kbuild: introduce destination-y
for exported headers") but never used in-tree.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

Makefile.headersinst: cleanup input files

After the last three patches, all exported headers are under uapi/, thus
input-files2 are not needed anymore.
The side effect is that input-files1-name is e

Makefile.headersinst: cleanup input files

After the last three patches, all exported headers are under uapi/, thus
input-files2 are not needed anymore.
The side effect is that input-files1-name is exactly header-y.

Note also that input-files3-name is genhdr-y.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

kbuild: collect shorthands into scripts/Kbuild.include

The shorthand "clean" is defined in both the top Makefile and
scripts/Makefile.clean. Likewise, the "hdr-inst" is defined in
both the top Make

kbuild: collect shorthands into scripts/Kbuild.include

The shorthand "clean" is defined in both the top Makefile and
scripts/Makefile.clean. Likewise, the "hdr-inst" is defined in
both the top Makefile and scripts/Makefile.headersinst.

To reduce code duplication, this commit collects them into
scripts/Kbuild.include like the "build" and "modbuiltin" shorthands.
It requires scripts/Makefile.clean to include scripts/Kbuild.include,
but its impact on the performance of "make clean" should be
negligible.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

show more ...

kbuild: fix make headers_install when path is too long

If headers_install is executed from a deep/long directory structure, the
shell's maximum argument length can be execeeded, which breaks the ope

kbuild: fix make headers_install when path is too long

If headers_install is executed from a deep/long directory structure, the
shell's maximum argument length can be execeeded, which breaks the operation
with:

| make[2]: execvp: /bin/sh: Argument list too long
| make[2]: ***

Instead of passing each files name with the entire path, I give only the file
name without the source path and give this path as a new argument to
headers_install.pl.

Because there is three possible paths, I have tree input-files list, one per
path.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Tested-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

show more ...

headers_install.pl: convert to headers_install.sh

Remove perl from make headers_install by replacing a perl script (doing a
simple regex search and replace) with a smaller, faster, simpler,
POSIX-20

headers_install.pl: convert to headers_install.sh

Remove perl from make headers_install by replacing a perl script (doing a
simple regex search and replace) with a smaller, faster, simpler,
POSIX-2008 shell script implementation. The new shell script is a single
for loop calling sed and piping its output through unifdef to produce the
target file.

Same as last time except for minor tweak to deal with code review from
here: http://lkml.indiana.edu/hypermail/linux/kernel/1302.3/00078.html

(Note that this drops the "arch" argument, which isn't used. Kbuild
already points to the right input files on the command line.)

Signed-off-by: Rob Landley <rob@landley.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Boyer <jwboyer@redhat.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: David Howells <dhowell@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>

show more ...